How-To Change Your S&G Keypad Combination | Gun Safe Keypad Combo Change
HTML-код
- Опубликовано: 28 авг 2024
- How-To Change Your S&G Keypad Combination | Gun Safe Keypad Combo Change
Get Your Patriotic Merch HERE: www.a1edustore.com
Changing your combination/password on S&G (Sargent and Greenleaf) keypad locks. This will work for most all Titan Pivotbolt electronic locks and Titan Direct-Drive electronic locks, 2009 and up. If your not sure hit me up. www.a-1locksmith.com | 972-690-8464
Read instructions like 3 times, no clue. Watched your video once, nailed it! Thanks for the video!
I changed the combo just like you show but the lock doesn’t lock at all after. What do I do?
Thank you!
@@tomesalk Did you end calling us or a locksmith? What was the final verdict?
Thank you so much! You rock.
@@schadury2602 Thanks for watching!
Thanks for the video. I have the same lock, only I do not hit # after the code, and I have to turn a plastic ring around the lock. I have tried the codes that you put on this video as well as a #10 found on another site. I cannot get it to change to a new code. Bought this safe from a neighbor that was moving and have no manual. Any chance you would be familiar with this lock. thanks for your videos. Even though I have the wrong lock, it showed me stuff that I did not know. Good work my friend.
Chris Gill try this code out. I have the d drive lock also. ruclips.net/video/4ZoHNfI48eY/видео.html
Easy video. Worked perfectly.
Thank you for watching, glad it helped!
Appreciate the video worked perfect on my Liberty Safe.. Thank You!
Glad it helped!
Quick question we have a American security with s/g key pad lock when I open the door I can not throw the bolts have to close door to throw them.
System is designed to not throw the bolts when it's open, so you don't bang the bolts against the paint.
Great video!! Made it super easy
That's great, I'm glad it helped!
I just bought a safe, Thanksgiving weekend, a Liberty safe, got it , brought it into the house set in place, read the Manuel and set my combination, ran it several times to make sure I had it right and did it with the door open, I was afraid to put my guns in just yet and still wanted to make sure all was ok, I go to finish bolting to the floor two weeks latter and my combination does not work, now they want $25 dollars to send me information on how to reset my safe, can you give me any pointers on what else to do?
unclebellys Hello, sorry we missed this. My first thought would be to replace the battery and make sure it’s a Duracell brand, only, standard copper top. I recommend a big box home improvement store because they sell batteries more than other big box stores, so they always have fresh batteries. I hope this helps!
Great video 👍
After opening the lock it locks again very shortly afterwords.
How do i change the opening time?
Do you know which model keypad you have? I don't know that there is a setting for that. Most locks offer ample time to enter your code, turn the handle and pull. Of course they automatically lock, but so long as the handle is turned it's fine.
It's a Titan Pivot Lock.
The front of the pad looks similar to the one you show in the clip, exept mine has no lightbulb sign on it.
Frisco,were in ny and i cant open the safe cause the pad seems stiff/can u help?
hi ,I was changed the duracell batteries. and now lock is opening but when we put the second combination its showing mode + status 1 + status 2 LED at a time . can you please suggest the resolution.
I have a liberty safe I bought but don’t know if they ever reset the combination I have a traumatic brain injury so memory is not the best a slow video would be awesome.
VR,
Have you called a local locksmith or us?
Hey, what is the Management Reset Code? It is changed with the 67*. Does that need to be changed too? If I don’t, can someone overwrite the other codes on the lock?
That's the factory default if all codes are lost and you're locked out. We usually never recommend changing that. Did you register your safe with the manufacturer?
@@A1LocksmithofTexas Actually, The lock is not on a safe, but on my line of ATM machines that I just started working with. Thank you!
If this doesn't work, try a fresh battery. My battery was dying and it wouldn't let me reset the code
Hey A-1 , I have the same type of lock but without the flashlight symbol on it. I changed the battery because it was getting low, I replaced it with the door open but I didn't leave the bolts out, now the original code I've b een using doesn't work and when I try changing it to a new code using the method in thus video ,it doesnt work either. Do you know how I can fix this?
David F what’s your safe?
@@A1LocksmithofTexas, thanks for responding but I got it figured out. It's a liberty, so all I had to do was push in the release button on the inside of the door, then I pushed the bolts back out, tried the code and it worked , thanks again!
Hey A-1 ever had a dead keypad on a SG
I tried changing by this method but did something wrong now the new or old combo won't work. Get double beep when hitting a number
I just got a brand new safe and I forgot the passcode what do I do??
Did u have any luck
Remove the cover combo like you would to change the battery, then remove the back plate. When lock is completely removed you should see the key-way for your manual keys supplied. At least that's how my safe works. The key-way is under the electronic key pad.
I have an SG that looks like yours, what has a single lever instead of a three handled wheel. When I try to lock mine, it won't do it. I found a little switch on the hinge side and push that in, and when I lock the handle and throw the bolt, and enter 22* when I re-enter the 123456# it acts like I'm opening the safe instead of letting me reprogram. What am I doing wrong?
@@renovacman I believe what you’re describing is a detent on the back side (aka hinge side) of the door which is in place so you don’t slam the door with the bolts out. Your safe (or your keypad anyway) must be at least 10 years old or older. Read the following aloud a few times and then begin. Move at a steady pace - not slow and not too fast. Same rules apply : door open, bolts out, 7 4 * , Existing Combination #, you should hear 5 beeps, 1 * , should hear 3 beeps, new six digit combo # , should hear 3 beeps, new six digit combo # , should hear 3 beeps. Now test your new six digit combo and turn the handle.
@@A1LocksmithofTexas Love you man. Absolutely perfect instructions. You are the dude 😎
@@renovacman Prove it by liking and subscribing! Hahahaha, that’s what I’m supposed to tell everyone. Seriously, I’m glad it worked, man 💪🏻🤠
Thanks it's nice vedeo please make vedeo how to reseat lost password
Thanks for watching! So you have a S&G & is the door open?
I bought a champion safe model triumph 25 with a sg keypad from a neighbor and I’d love to change the code but I’m scared to get locked out. When I open it I can’t throw out the bolts they won’t come out. What should I do first ?
Thanks for stopping by. If you open the door and try to throw the bolts out with no luck then you probably have a detent. Typically a detent is placed on the back side of the door or the bottom of the door, this will be a piece of metal sticking out like a bolt. Typically it’s got a black/red plastic cap or coating on the end. It’s sticking out like the bolts however, you’ll notice is tremendously smaller then a bolt. After locating the detent….door is open, depress the detent & at the same time rotate the handle/spindle to throw the bolts out in order to begin. It’s there to avoid throwing the bolts and slamming the door which would damage then paint (potentially the bolts, too).
Worked great 👍
Glad we could help and thanks for watching. Checkout the channel for lots of other gun safe related videos.
You my friend are a Genius !!!!!! “ YEA BOY!!!” 🤠
👏🏻👏🏻👏🏻 Like & subscribe 🤷🏼♂️ lol
22R doesn’t work for my ‘07 SG brass rim
Open the door - turn the bolts out
Enter 7 4 * // Existing 6 Digit Code // #
Should hear 5 beeps
Enter 1 * // New 6 Digit code #
Should hear 3 beeps
Enter New 6 Digit code 3
Should hear 3 beeps
Sorry 22 * doesn’t work for me
@@dennydickenson-qv1jl Did you try my reply?
That doesn’t work with mine. I don’t have to press the # when I enter my code to open the safe either?
The one in video says “SG” At the bottom. What does your say?
Hello, if you lose the key for the 2006 S&G model, how do you reset the lock?
It depends, what kind of safe is it on?
I have a S&G 6120 from a safe I just purchased second hand the current combo is not known and the bolt is in the lowered position. I changed the battery ( of course with the door open ) and the keypad beeps with pressing the keypad. I'm interested in getting this unit operate operational again. Any advise?
Locks are inexpensive and easy to change. I might suggest just grabbing a new lock and swapping it out. We have them for sale on our website a-1locksmith.shop . Normally I don’t go right for the “buy a new one”, but without the existing code and it’s second hand, I genuinely like the peace of mind of brand new.
Brand new safe. 123456 opens it.. i throw the bolts back out but 22*, 33* and 74* dont work. Frustrating
That’s very odd. It’s definitely a S&G keypad? What brand/model is the safe? 1-2-3-4-5-6 # or no # at the end?
@A1LocksmithofTexas brand new American rebel.. definitely a S&G... directions talk about star or basic mode
@@russellvogel4337 Honestly it should be simple simple. Is it beeping several times after you press 1-2-3-5-6-# or just a couple beeps after? I would replace the battery with a brand new Duracell copper top from Home Depot. Make sure the door is open, bolts thrown open and then begin. Use a very steady pace walking through the change procedure.
@@A1LocksmithofTexas when I open... 2 beeps
Lol... well.. you were right.. it suddenly worked
Worked great thanks! Owners manual instructions did me no good
I get it, haha. Thanks for watching.
I have correct safe Code Browning Safe but When I put combo in nothing happens and it was just working last Week HELP🙏🤠
When you enter your combo what sound/how many beeps do you hear?
Not work
I’m sorry, there are several models of locks from S&G. How old is your keypad?
Mine didn't work. It just unlocked it... and my 9 min delay how do I do that one?
There are many different S&G keypads. You’re saying you have a delay on your keypad? I may need more information. You’re welcome to shoot us an email with more details. robert@a-1locksmith.com
What if u don't remember ur old combo?
What kind of safe do you have and is it set to the original manufacture combo?
Worked perfect once I remembered I first had to enter my combo😂. Thanks for the help and great to the point instructions!
That’s awesome, glad we could help. Like & subscribe to follow along for more content.
I have the s&g but the # does not work to change the code. could it be different process to change combo?
It’s very possible, how old is your safe/keypad?
charlotte ellis
my keypad is only 18 months old
@@CHARLOTTEAELLIS Does your # key work just to open the safe?
Can you do a video on LaGard mechanical combination change with the key it’s for an ATM Great videos 👍
Thanks so much. What are looking for in a LaGard mechanical video, how to use the lock?
@@A1LocksmithofTexas I was able to change combination using the changing index key thanks to your explanation 👍
Thank you sir!
You are welcome!
When I do that it does not open and blinks red like ten times
Have you replaced the battery with a Duracell copper top from Home Depot like we talk about in our videos?
Blinking red lights and beeps are messages from the lock. A lot of blinking red lights and several beeps usually means wrong combo. Wait 20 minutes and try again, after replacing the battery.
S&G are garbage, I installed new copper top batteries which worked then doesn't anymore. Mine is just beeping once then locks me out constantly
S&G for years was the main option. They absolutely had their flaws & they tried to fix the problem with their D-Drive model. As a locksmith I preferred the D-Drive for years however, there’s been other companies arise with very good keypads. How old is your S&G keypad?
@@A1LocksmithofTexas probably around 4-5 years now but I just spoke with them and they said that I have an entry model which is has a 4-5 year life normally which is still garbage
@@jimmylim5015 I know the ones that used to come on Liberty safes have a 5 year warranty. With a phone call and receipt you can get a replacement within 5 years of replacement. Liberty now uses SecuRam locks with the same 5 year warranty. However, past the 5 years you can upgrade the SecuRam locks to a lifetime warranty, through Liberty. Which is honestly really cool because no one else offers that.
@@A1LocksmithofTexas thanks for informing, I don't even know if the model that came with my safe includes such a warranty as it is the entry model in their series. I think my safe only came with a limited time warranty
Excellent video, Thanks. Do you have any advice to prevent an EMP lockout? Pro Steel said they are good for 50,000 volts, EMP resistant, and that may or may not be enough? If I remove the keypad and unplug the connector to safely store it, will it lose the combo? If so, then what can I do?
Great question I get all the time. It will not forgot your code on a S&G lock. I’ve seen/heard the same ratings for EMP however, my answer never changes, if that’s a concern to you then get a mechanical lock.
Can it work S&G A series OTC based safe lock?
You could have the older style S&G 6100 series in which that sequence actually starts with 7 4 * Existing Code # // should hear 5 beeps // 1 * // new 6 digit code # // should hear 3 beeps // new 6 digit code # // should hear 3 beeps . Then test the new 6 digit code. Advance with caution - I clearly have no idea what safe/lock you have. Make sure the door is open and bolts are extended out before beginning. Good luck
@@A1LocksmithofTexas this was A series safe lock , if you permitted then I show you the pictures of safe, so kindly share your email ID or whatsapp
@@bollywoodhitz8200 robert@a-1locksmith.com I’d have to see the lock inside the door, not just the keypad. If I can help I’d be glad to.
@@A1LocksmithofTexas this was S&G A series 6128 model.
Tried it numerous times and I hit 22* and it beeped then I typed in old combination and still nothing. I have the 8 volt battery kind from 2008. The legacy vault and same faceplate. Replaced battery and it’s still not changing over to a new combo. Locks me out after so many tries. Bought it from Academy in 2008.
You could have the older style S&G 6120 in which that sequence actually starts with 7 4 * Existing Code # // should hear 5 beeps // 1 * // new 6 digit code # // should hear 3 beeps // new 6 digit code # // should hear 3 beeps . Then test the new 6 digit code. Advance with caution - I clearly have no idea what safe/lock you have. Make sure the door is open and bolts are extended out before beginning. Good luck
@@A1LocksmithofTexas thank you I will try that. So appreciative. 💛✌🏻👍🏻🦋 I will let you know how it goes. I got the safe in the divorce he didn’t want to move it. But I don’t want to deal with him ever again. Thank you
@@A1LocksmithofTexas 9 volt sorry I’m mentally exhausted. ✌🏻
@@A1LocksmithofTexashello I have the 6120 and the 74* doesn't work?
@@coragore1512 That’s very odd, it’s almost always either the procedure in the video or the 74*. You may have to reach out to the manufacture with the serial number on the lock. I’m really not sure, I’m sorry that didn’t work.
NO JUICE
Thanks for the comment, what’s going on?
I have an Old SG on a fireproof file cabinet.
When you open the lock after 30 seconds you hear the lock click and if you close the drawer it's locked.
So I'm trying to find out how to change this combination. The back of the lock says Type 1 44TL
Thanks for the comment. The auto lock design can be a nuisance on file cabinets. You’d have to use a mechanical dial to avoid that.
@@A1LocksmithofTexas how do you change the combination on the S&G titan lock used on my fireproof file cabinet?
@@larrrs3 That should be procedure that starts 22* should work on Titan series S&G locks.
@@A1LocksmithofTexas nope it doesn't go into program mode. When I hit 22* it beeps once then I enter old code and you hear the bolt retract and the key pad doesn't respond when I try to enter new code then you hear the bolt lock and once again the keys respond.
It never beeps more than once.
@@larrrs3 You could have the older style S&G 6120 in which that sequence actually starts with 7 4 * Existing Code # // should hear 5 beeps // 1 * // new 6 digit code # // should hear 3 beeps // new 6 digit code # // should hear 3 beeps . Then test the new 6 digit code. Advance with caution - I clearly have no idea what safe/lock you have. Make sure the door is open and bolts are extended out before beginning. Good luck
What if ur locked out?
Then 9 times outta 10 you need to call your local locksmith or the manufacture, if you registered your safe when you purchased it.
@@A1LocksmithofTexas thank u, no I don’t have that information. Unfortunately I got this off a friend and the code doesn’t work anymore…so basically I’m gonna have to call lock smith. 2nd safe in a year. Thank you!
Doesn’t work. I don’t get the 3 chirps
*****MAKE SURE YOU BEGIN WITH DOOR OPEN AND BOLTS STICKING OUT****
You could have the older style S&G 6120 in which that sequence actually starts with 7 4 * Existing Code # // should hear 5 beeps // 1 * // new 6 digit code # // should hear 3 beeps // new 6 digit code # // should hear 3 beeps . Then test the new 6 digit code. Advance with caution - I clearly have no idea what safe/lock you have. Make sure the door is open and bolts are extended out before beginning. Good luck
@@A1LocksmithofTexasthis worked for me. Thank you
@@Florida_man420 Awesome, thanks for watching. Hopefully you’ll checkout some of other content. What kind of safe you got?
@@A1LocksmithofTexas it is a John Deere edition Liberty Safe model r-12 from 2005. I got it off Facebook marketplace with the door in the open position but locked with an unknown combination. I contacted liberty’s customer service with the serial number and they provided me a master reset code for $25.
@@A1LocksmithofTexas do you have any idea what it might be worth today? I couldn’t find any info on it
Thank you. It worked!
Thanks for watching! Don’t forget to Like and Subscribe if we did you a good job.
I’ve tried this 3 times when I do the 22* it doesn’t beep. I might just leave it as is , I got the safe used with a existing code .
You could have the older style S&G 6120 in which that sequence actually starts with 7 4 * Existing Code # // should hear 5 beeps // 1 * // new 6 digit code # // should hear 3 beeps // new 6 digit code # // should hear 3 beeps . Then test the new 6 digit code. Advance with caution - I clearly have no idea what safe/lock you have. Make sure the door is open and bolts are extended out before beginning. Good luck
Thank u for the advice the safe is definitely older I might replace the electronic lock because it isn’t very responsive . Would any replacement s&g lock of the same style replace it .
It does have a new battery already , thank u
@@Comike27 If there’s an S&G keypad now then yes a new Titan from S&G. As a locksmith I also like SecuRam keypads. We sell online if you want to buy from us. Don’t forget to like the video. And I strongly suggest copper top Duracell batteries.
Thank you so much. You just saved me $200 bucks!!!
Thanks for watching. Don’t forget to like & subscribe if you liked or found us helpful.
Thank you Sir, it worked the first time! just subscribed. Keep up the awesome content! I was getting worried I already messed it up. 😂
Thanks so much, I’m glad it helped!
I can’t throw the bolts when the door is open. Help.
Ok, that could so many things. Do you normally try to throw the bolts with the door open? What safe and model is this, what year was it manufactured? Manufactures often use things like bars on the hinge side or at the bottom that have to be depressed (like when the door is shut) to avoid throwing bolts with the door open, so you don’t slam the door - damaging the bolts or scratching the paint. Do you have a keypad or mechanical lock, if keypad then I recommend a fresh new Duracell 9V from a big box home improvement store (they sell batteries faster and restock more often then other stores).
@@A1LocksmithofTexas it is a Fort Knox safe. We replaced the combination lock with an SG digital lock. I would like to change it but can't seem to do it with the door open. When I open the door the bolts go in the door and cannot be put back out until its in the closed position.
@@A1LocksmithofTexas Found the lever to throw the bolts open with the door open, but 22* then the existing combination only unlocks the door. No 5 chirps. I appreciate your replies
@@3pbandj Glad it worked. Again, you haven’t told me much, so please take my help with a grain of salt as troubleshoot only. MAKES SURE THE DOOR IS OPEN AND BOLTS ARE OUT.
Older S&G 6120 locks used :
Press 7 4 * then enter your EXISTING 6 DIGIT CODE followed by # YOU should hear 5 chirps next Press 1 * Enter NEW 6 DIGIT CODE followed by # You should hear 3 chirps Enter NEW 6 DIGIT CODE AGAIN followed by # You should hear 3 chirps . Test your new 6 digit code followed by #. Good luck.
@@A1LocksmithofTexas Again you are awesome. I was able to find the manual and the 74* was the way to go!!!
Thank you. Tried 3 other videos which did not work unitl yours.
We’re glad we could help and thank you for saying so!
*22 doesn't work on my safe
Ok, doesn’t work for every S&G. What year did you get the safe?
my elock does not stay closed when I turn it
What brand is your safe, what model, what year is it and what brand of lock do you have?
@@A1LocksmithofTexas Sargent and Greenleaf titan
@@A1LocksmithofTexas thanks for answering
@@carlossantana976 With the Titan the first thing we always try is to run to a big box home improvement store and buy a Duracell 9v. Specifically the copper top. Try that first with the door open, 3 times, to make sure it worked. I don’t which safe you have or how old, but if this doesn’t work with the door open then call Liberty directly. Locks have a 5 year warranty. Let me know.
@@A1LocksmithofTexas problem solved Thank you for sharing your knowledge
I currently have an SG LOCK that is not responding I tried to access my safe but it didn’t take my code so I changed the battery and it still doesn’t recognize my code.
I reached out to Winchester and they said in an email that I needed to change the key pad so ordered it and changed it, but I still can’t access the safe!
Can you help?
I’m sorry to hear the issues you’re having. Did you purchase the keypad from Winchester or buy it somewhere else? Are you in DFW, TX? It’s very possible you’ll need the safe drilled open, repaired and a brand new lock installed.
awsome thank you
Glad we could help, thanks for watching!
I have a Sargent and green leaf lock and keypad I purchased to replace a dial lock. The instructions say it’s supposed to be able to be programmed with up to 9 user combinations. I tried the programming in the manual and it didn’t work. It was a *74 program sequence. The *22 sequence you mention here works to reset the code but how do I set the other 8 user codes?
What model number is on the sticker on the box or the sticker on the lock? If the *22 sequence works you can download the Titan instructions off S&G’s website. That should walk you through it. Call me with any questions, though.
SG6120-234 Is the model number from the receipt where i purchased the key pad
If the lock is a 6120 then the instructions it came with should work to add users. Otherwise I would do an online search for S&G 6120 instructions, which would walk you through it very easily. And of course refer back to whomever you purchased it from to confirm the lock you purchased matches the receipt.
Thank you very much 🙏🏻👍🏻
Thanks for watching, glad we could help!
How can I open the safe if I don't have the code? My stepdad never told anyone what the code was before he passed away last year. I can't afford to drill it.
Hello, James! We’re sorry to hear about your stepdad. Honestly without the code or a locksmith drilling it open it rather shortens your list of options. With a death certificate and a court appointed power of attorney you could reach out to Liberty safe to see about getting in. To be honest, this is IF your stepdad registered the safe warranty. Then potentially you’d only be paying for a locksmith to come on site and Liberty would assist them with opening the safe without drilling. I hope this helps!
THANK YOU SIR... VERY HELPFUL. JUST INHERITED A CABELAS 50 SAFE WITH THAT LOCK. NEED TO CHANGE THE CODE. THANKS.
Mark Robucks Thanks for watching, enjoy your safe and call me if you need any accessories like interior lights or handgun hangers
Does this procedure work on the older S&G keypads and can you use a 4 digit code?
dickey moore Thanks for watching, really depends on how old. Call/email me for more information. Depending on your model you can use 4-8 digit codes.
@@A1LocksmithofTexas yeah got my safe yesterday and it takes a 6 digit code
dickey moore You’ll know if this procedure works on your keypad if open the safe, throw the bolts, enter 22* then the current combination followed by # and if you hear the Five Chirps. That’s how you’ll confirm this procedure works in your keypad. Have the entire procedure written down, so if you hear the Five Chirps you’ll know to keep going. Please check your owners manual before starting to confirm the Change Code procedure
@@A1LocksmithofTexas 10-4
We got a safe from my brother in law who suffered a brain injury. The safe has been sitting in our mud room for the past three years.
We’ve tried 7 4 * followed by 123456# it beeps like two multiple pulses. But we can’t open it. And we don’t know the serial number.
Can you help?
What type of safe is it?
@@A1LocksmithofTexas Hey A-1. I have the same issue. Moved into this house 3 years ago...I can get in because it's open...but I can't lock it back...just 2 multiple beeps. It's a Fort Knox.
Brandon Bradburn Right on, call me and I’ll get some questions answered to see if I can help
@@A1LocksmithofTexas Thanks I will call!
Followed directions. 22* then old code, then #. No lights/ beeps. Safe just unlocks. Tried several times. Any suggestions?
This works on specific S&G locks. Did you call a locksmith or us? What'd you find out?
@@A1LocksmithofTexas found out that there was a DiFranco code series of digits to use. Got the info from Browning safe tech support. Thanks for getting back to me. Situation handled.
@@JDwyer-65 sometimes it's 7and 4, stands for S and G.
Ive got a champion model T and for some reason the key pad is starting lit up red and the red won't go off unless you unplug the battery I've entered the code and it won't open and every number you push it's making 2 beeps instead of 1! Do you have any ideal what's going on it has the sg key pad also
Hey, Randy, what did you find out? That almost sounds low battery issue to me.
I bought I used safe Liberty John Deere safe Model number D-23.The combination supplied worked Great , I tried to change the combination , Now Nothing Works , What can I do next ? to make the safe operational again ? The door is open with the bolts locked Thanks for the help . millerliteman61@yahoo.com ( 928 ) 783- 6166
I need some help please
I did the first part and I reset the code and everything confirmed like it should except it won't open
Anthony Ulfig - hey, man! Sorry, I wasn’t getting messages. Email robert@a-1locksmith.com, if you still need help.
Thank you
gagan arora Thanks for watching!