Hope you enjoyed my first attempt at 70mph! This thing is a beast! So stable at speed can definitely see myself trying for the 100mph top speed! Have any of you managed it yet? If so what setup where you running? Best way to get there etc? Also i mentioned in the video i would be fitting hoons and i probably will but i realise they will be a smaller diameter which may result in a slower speed than the KATAR wheels on this setup. Gearing up seems like the way to go.. Hopefully we can do better next time. Happy but also disappointed at the same time :(
those Ovonics were the issue, others have had the same issue, and once they swopped out Batts, there was no more ESC cutting out. They got too much Voltage sag, try100c batts, yowoo graphene, or spektrum 100c.
Thank you tim! It's very exciting and the thrill of speed makes it very addicting to go out and top the last record!! Can see this getting very expensive!😭🤔🤣
U will go slower with hoons by a few mph smaller tire so there for less distance with every spur gear rotation!! But for the street ya need hoons cuz any off rd tire will do nothing but burn up after a few packs!! I can get 4 mph faster with off rd tires then the hoons
I got back into it about the same time you did. And 70 mph was my personal best, using the police radar trailer on my street. I built it from a slider, a lady in a Cadillac ran over it on purpose as it was sitting by a curb to stay out of the way and I said there goes $500 down the drain (just stuck new batteries in) by the way. I got lucky and she ran over it rear shock tower to front lifting her car up and said " I didn't see it". Then how do you know what I'm talking about?🤔 She didn't check her car, didn't say sorry, soooo rebuild again. Not one penny spent to repair, as of course it's better to load up on screws when you buy an rc, just days of down time wrenching and replaced bent or broke screws. Straighten the front shock tower and lower hinge pin. Now at about 85-90mph with a 25/46. Now with 28 pinion and 38 tooth spool. Start on 4s and work up to make sure all is good. Need to check my speed. Nice run🤙🤙👍🤜💯🔥had she ran over it sideways, everything would have been destroyed.
Somes times, when it's very cold, my esc's seams to hit lvc under full throttle, but with the packs still charged. I have no problem with the same batteries in warmer weather, running those packs on track, full throttle until true lvc. Cold affects battery power and range.
I noticed u slowed down early a lot on this video...due to you maybe being nervous..but great job...the most important thing id having a blast...i enjoy my typhon 6s....i have geared to hit 60mph...and that is my sweet spot....i love seeing u guys break record speeds😁
Another great video Ricky, that's got 100 in it for sure. Can't wait to continue your journey buddy through 2021 and beyond. Virus allowed and if ok have a bash at some point 👍
For sure mate! Its so stable at speed and very different to the likes of 144001 and 124019 you really notice the extra weight being 1/8 scale. Want to beat 100mph with this and the 124019 this year so stay tuned mate!! Sure will be up for that lets get this virus out the way!!
Much like you I've been out of the hobby for 10 years and I think I'm going to buy this car! All the Battery stuff has gotten quite confusing since I last checked though haha
Its great! Would totally recommend it! I know i did a lot of research and stuff when i got back in to all this back in april 2020 had to remind myself about a lot of things especially when it comes to lipo's and charging. I ran nitro and gas for years and years! Now i am very much an electric fan but there is so much to learn!
@@beyondRC I never got into Nitros! Always seemed abit antisocial to me! I was actually into crawlers most of the time. I had a brushless buggy that was really cheap but heaps of fun so hence my reasoning to get this one!
My V4 Typhon runs 78MPH on two 3S 5'000MAH 50C Gens Ace LiPo Batteries. I am running the speed Pinion out of my Mojave, and am running the stock tires.
Just wondering would a different tire tread benefitial? ARRMA is looking pretty attractive for my next purchase. Thank you for the demo and keep pushing those limits.
I think so a good set of on road tyres would be great such as the dboots hoons but they are smaller in diameter so unless I gear up a little it will actually be slower but gain a lot more grip. So I am now looking into a lot of possibilities for the coming months!
So close. 👍 My 3s v2 Typhon also cut out with a 20 tooth pinion, yet to try a 20T on my 6s v5. I purchased some ProLine Avenger HP's for speed runs with the Typhon, bigger than the Hoons.
I read that it could be the low voltage detection and its better to turn it off for speed runs but not sure how true this is.. Will have a look at those prolines cheers for the info. Max speed you have managed on the 3s?
@@beyondRC 58 mph on my 3s Typhon. I may swap out the BLX 100 ESC to a Max 10 SCT, hopefully it won't cut out so quickly and has way more options. The Avengers are nice but expensive, it's very tempting to do loads of drifting and doughnuts with them.
I have hit 64 mph with the stock pinion with a 6s 5200 50c battery pack. The issue I ran into when trying to install the 20t pinion is the bolts to the stock pinion are on so tight that I stripped them. Not sure how to get them out now which is gonna lead to a trip to the hobby shop. Incredibly well built powerful machine though even in stock form!
Yeah u need a little more real state and I’m sure you will hit that 70mph mine dose 72 with high speed gearing!! And if I wanna get into the speed game I hope you got big pockets cuz it can get extremely expensive.. but an awesome platform to go for it with!! Cheers and I’ll be looking for the video!!
Don't let the 1 mph get to you, a better clearer road surface would of probably got you there. Bear in mind with the Hoon's that although they have less resistance they are only 100mm diameter, compared with the Typhon's 115mm diameter.
Nope! Other projects or things to record have always had to take priority to help grow the channel and on my very limited time with kids/work/running the channel its been on the back burner for a long time now! Things are getting easier when it comes to time so hopefully can get the typhon done before the end of this year 😭
i have the same car. I bought some avenger tyres after my original blew out doing a donut. im gonna put the speed pinion in it as well and maybe lower the suspension. I dont have a gps yet but i guess it should do 70mph as well.
Are you still loving the Typhon?? My local hobby shop has one the other day so I went to go buy today and they had sold it. I'm going to have to order one online now.
Your outcast looked like the tumble king there for a little bit, I'm going to a 5670 1100kv motor and max 6,, I like your 39 tooth spur what would be a good pinion?
Beem nice if the shell wood fit with my 3s hardcase now iv got to try find lipos that will fit so i sold the typhon if arrma cant make a rc that the shell will fit without a handache ill part ways with it
I have had a couple of people mention this now! Seems to be a massive issue to a lot of people! I would have also thought the typhon shell would accommodate 2x 3s hardcase and that is disappointing on Arrmas side.
Wicked mate.must be utter frustration like hitting 99mph going for 100mph only 1 mph difference.did you update the skyrc gps like I said makes it update 10x faster and more accurate so you probably did hit that 70mph if not haha
Exactly couldn't believe that! All I needed was a gust of wind to push it that little bit further 🤣. I had a go and the computer didn't recognise it will have another go tonight 🤔
100mph is easy m8. You have the place all you need is the gear and a little luck. Maybe try some hoon 42/100 tires all around. Install a castle cap pack. And i think you can hit 100mph with same electronics. My limitless hit 140 first hit.. castle 1717 motor mambaX. Then i wrecked it trying to do a repeat. Lol tire blew. Good luck!
Will have a look at those tyres. From what I have seen on the arrma forums I may have to run the limitless gearing or spool gear and much larger pinion and maybe on road tyres?? This high speed stuff is new to me I ran 1/8 trucks on 6s for years but have a lot to learn when It comes to the speed run side of RC so i appreciate all the advice and support along the way and hopefully recording my journey will help others to do the same! Thanks i will check those tyres out!
@@beyondRC when it comes to speed there is only one thing you need to understand.. checklist! Lol... my friend put it this way once. “Speed runs is like going on a hot date with a bombshell for the first time while being a virgin” lol.. “you only get laid when everything goes right” hahaha for me personally what made the difference in managing my cost per pull was getting a high pov and dji fpv. Im returning to the car hobby after ascending the accolades of “fpv drone freestyle.” I bring a lot of fpv freestyle best practice back with me to rediscover my long lost love for rc. This year alone i picked up every single 6s 8s Arrma got reconnected with my kyosho Inferno GT this time electric. 2 xmaxxes so that the wife and kid can come along and play. Been doing bashing (my original love) and tempting faith (my horror story with rc 5k dream build went up to smoke the main reason i stepped away from rc cars) To make a short story long. What I realize about the drone and rc car community is this. We need to start talking more with each other. Because I sincerely feel we can bring good things to each others passion. The telemetry and black box tuning will change the rc car community. Which i notice some of the hardcore rc car guys are taking a dab in. Another part of this evolution i forecast is some sort of “flight controller” or “driver aid” you can see this with the esc smart function. I think a drone guy right now as we speak is building a driver assist system that can control all 4 wheels dynamically to provide the best possible driver experience. Just like real cars today. Its going to be able to lower or raise itself and have dynamic electronic dampers.. a esc cannot account for all of that we need a “driver assist” computer. Anyways cheers budd good chat sorry for the long 10 page later
From what I've read others say, anything over 20t and you'll definitely need a good fan on the motor and you'll be limiting your self to a few speed runs before it starts getting too hot. People have been putting 26t on them but I don't think the system can handle it.
Looking at getting one of these. Is there anything better for the money that’s RTR and can handle been bashed around a 1/8 buggy track? Are the new ones bulletproof?
Nothing is bullet proof but the typhon in my opinion is the best 1/8 buggy on the market!! I have both in 3s and 6s absolutely love it and worth every penny
Thanks for your reply, I live next to a 1/& buggy track so it’s the perfect bashing area. Just got an LC EMB 1 and have the brushless mini t too I might take the plunge for the arrma I think
You will love it I have in both 3s and 6S and two buddys with the 6s platform and everyone is extremely happy with it!! You won’t regret it that I promise!! Have fun!! And ur some lucky to have a track next door!! 🙂
The Hoons tires are smaller diameter and will not help you gain a higher speed. Though they do feel more stable at speed. I say balance the tires that are on there and you will crack 70mph no problem.
Cheers for the info. I did some research and also realised this and if I was to go hoons would have to look at my gearing to compensate for the smaller tires 🤔
@@beyondRC Just to let you know the gearing that I’m using now with the hoons is 20t pinion/46t spool. That has compensated enough for me after switching tires. Just recommend a motor fan to help keep temps down.
Hope you enjoyed my first attempt at 70mph! This thing is a beast! So stable at speed can definitely see myself trying for the 100mph top speed!
Have any of you managed it yet? If so what setup where you running? Best way to get there etc?
Also i mentioned in the video i would be fitting hoons and i probably will but i realise they will be a smaller diameter which may result in a slower speed than the KATAR wheels on this setup.
Gearing up seems like the way to go..
Hopefully we can do better next time. Happy but also disappointed at the same time :(
Believe it or not but putting hoons on it you will loose a bit of speed!! No shit! I’ve done it!!
those Ovonics were the issue, others have had the same issue, and once they swopped out Batts, there was no more ESC cutting out.
They got too much Voltage sag, try100c batts, yowoo graphene, or spektrum 100c.
I got 50mph with awanfi 100c batteries, You need higher discharge batteries so you can hit 70+mph, Nice clean passes by the way!
Yesterday I got 60.6mph on stock gearing, using the garmin GPS.
Yowoo 100c batts, just so you know.
OMG 😮 that was really exciting man soooooooo close! But we know now it’s obvious it will do the 70 mph easy... well done 👍
Thank you! For sure it can do it 😎👍
Good increase on 4s, great job on personal best 69 mph you'll hit 70 with those hoons tires great video
Thank you tim! It's very exciting and the thrill of speed makes it very addicting to go out and top the last record!! Can see this getting very expensive!😭🤔🤣
U will go slower with hoons by a few mph smaller tire so there for less distance with every spur gear rotation!! But for the street ya need hoons cuz any off rd tire will do nothing but burn up after a few packs!! I can get 4 mph faster with off rd tires then the hoons
Well done, keep going faster mate! That was so close!
Cheers mate 👍😎
Congratulations great speed run can’t wait to the next video.👍👍👍👍
Thanks! 👍👍
8.30min in.
That sound.
Wicked.
I want one
They are amazing! Would recommend it 👍👍
Way to go!! You will do it next run for sure!
So Close!! We will get it next time
congrats on your pb!!! i just ordered my 1st typhon....will get it tomorrow!!!!
awesome!!
@@beyondRC fo sho
I got back into it about the same time you did. And 70 mph was my personal best, using the police radar trailer on my street. I built it from a slider, a lady in a Cadillac ran over it on purpose as it was sitting by a curb to stay out of the way and I said there goes $500 down the drain (just stuck new batteries in) by the way. I got lucky and she ran over it rear shock tower to front lifting her car up and said " I didn't see it". Then how do you know what I'm talking about?🤔 She didn't check her car, didn't say sorry, soooo rebuild again. Not one penny spent to repair, as of course it's better to load up on screws when you buy an rc, just days of down time wrenching and replaced bent or broke screws. Straighten the front shock tower and lower hinge pin. Now at about 85-90mph with a 25/46. Now with 28 pinion and 38 tooth spool. Start on 4s and work up to make sure all is good. Need to check my speed. Nice run🤙🤙👍🤜💯🔥had she ran over it sideways, everything would have been destroyed.
Nice speed run buddy can’t wait to see you hit that 70+ mph 👍
Hopefully get there very soon! Cheers 👍
Brilliant videos keep em coming 👍
I've been thinking seriously about buying this rig. Still haven't made up my mind yet. Good vid!
Somes times, when it's very cold, my esc's seams to hit lvc under full throttle, but with the packs still charged. I have no problem with the same batteries in warmer weather, running those packs on track, full throttle until true lvc. Cold affects battery power and range.
Its unfortunate. I have plans to make a few changes and try the run again on a better day!
I noticed u slowed down early a lot on this video...due to you maybe being nervous..but great job...the most important thing id having a blast...i enjoy my typhon 6s....i have geared to hit 60mph...and that is my sweet spot....i love seeing u guys break record speeds😁
Really enjoyed this run! At some points i did slow down! I want to get 100mph out of this! 2021 will be very exciting!
9:44 aaayyyyyy nice
Another great video Ricky, that's got 100 in it for sure. Can't wait to continue your journey buddy through 2021 and beyond. Virus allowed and if ok have a bash at some point 👍
For sure mate! Its so stable at speed and very different to the likes of 144001 and 124019 you really notice the extra weight being 1/8 scale. Want to beat 100mph with this and the 124019 this year so stay tuned mate!! Sure will be up for that lets get this virus out the way!!
Much like you I've been out of the hobby for 10 years and I think I'm going to buy this car! All the Battery stuff has gotten quite confusing since I last checked though haha
Its great! Would totally recommend it! I know i did a lot of research and stuff when i got back in to all this back in april 2020 had to remind myself about a lot of things especially when it comes to lipo's and charging. I ran nitro and gas for years and years! Now i am very much an electric fan but there is so much to learn!
@@beyondRC I never got into Nitros! Always seemed abit antisocial to me! I was actually into crawlers most of the time. I had a brushless buggy that was really cheap but heaps of fun so hence my reasoning to get this one!
My V4 Typhon runs 78MPH on two 3S 5'000MAH 50C Gens Ace LiPo Batteries. I am running the speed Pinion out of my Mojave, and am running the stock tires.
Subscribed and diggin your channel ✊🏻
Just wondering would a different tire tread benefitial?
ARRMA is looking pretty attractive for my next purchase. Thank you for the demo and keep pushing those limits.
I think so a good set of on road tyres would be great such as the dboots hoons but they are smaller in diameter so unless I gear up a little it will actually be slower but gain a lot more grip. So I am now looking into a lot of possibilities for the coming months!
So close. 👍 My 3s v2 Typhon also cut out with a 20 tooth pinion, yet to try a 20T on my 6s v5. I purchased some ProLine Avenger HP's for speed runs with the Typhon, bigger than the Hoons.
I read that it could be the low voltage detection and its better to turn it off for speed runs but not sure how true this is.. Will have a look at those prolines cheers for the info. Max speed you have managed on the 3s?
@@beyondRC 58 mph on my 3s Typhon. I may swap out the BLX 100 ESC to a Max 10 SCT, hopefully it won't cut out so quickly and has way more options. The Avengers are nice but expensive, it's very tempting to do loads of drifting and doughnuts with them.
@@benlait3696 that's still a very good speed on the 3s blx. I will be looking at those tonight and doing a lot of research!
I have hit 64 mph with the stock pinion with a 6s 5200 50c battery pack. The issue I ran into when trying to install the 20t pinion is the bolts to the stock pinion are on so tight that I stripped them. Not sure how to get them out now which is gonna lead to a trip to the hobby shop. Incredibly well built powerful machine though even in stock form!
I had the same issue with my infraction, I used a Grinder and pretty much made a flathead screw also maybe use a pair of grips?
Certainly not only the wheels, you need to changed the shock oils too.
I just hit 81 mph today on my stock 6s Typhon!
Nice run ,, I enjoyed it.. cool ccol.
💯👍
Thanks 👍
Heck, the location of the GPS could've been the difference, great job.
Charge punions n tayer is bater sir. Used tayer on rood. Pinion to 25 or to 27.😊😁👍
Yeah u need a little more real state and I’m sure you will hit that 70mph mine dose 72 with high speed gearing!! And if I wanna get into the speed game I hope you got big pockets cuz it can get extremely expensive.. but an awesome platform to go for it with!! Cheers and I’ll be looking for the video!!
We will get there and yes!! Can see this getting expensive 😯😯
Great video could you recommend some places in east London to run my vortek 😊
I am pretty sure that you can get closer to 80MPH, running a little more distance! Holding it wide open as long as possible!!
Im sure i can! Currently searching for a much better place to do speed runs as this place is far too narrow and not long enough!
Don't let the 1 mph get to you, a better clearer road surface would of probably got you there. Bear in mind with the Hoon's that although they have less resistance they are only 100mm diameter, compared with the Typhon's 115mm diameter.
Cheers mate! I will get there. Lots of research and stuff to do can see this getting very expensive 🤣🤣
Dude, maybe the gps location got messed the aerodynamics, at those speeds everything counts fot top speed. But awesome!!
Checking back in with you to see if you had reached that 100mph goal with the typhon.
Nope! Other projects or things to record have always had to take priority to help grow the channel and on my very limited time with kids/work/running the channel its been on the back burner for a long time now! Things are getting easier when it comes to time so hopefully can get the typhon done before the end of this year 😭
i have the same car. I bought some avenger tyres after my original blew out doing a donut. im gonna put the speed pinion in it as well and maybe lower the suspension. I dont have a gps yet but i guess it should do 70mph as well.
easily! :)
Are you still loving the Typhon?? My local hobby shop has one the other day so I went to go buy today and they had sold it. I'm going to have to order one online now.
Love it best 1/8 buggy I've owned 😏👍
@@beyondRC Awesome. I got mine today. Now I'm just waiting for my battery to ship to me
🚗 🔥 First
Get the Arrma Limitless roller and put an 8s system in it.
That's brilliant saaan. :) 69 MPH eh! Wink wink :) :)
Haha cheers saan rapid little thing!
Your outcast looked like the tumble king there for a little bit, I'm going to a 5670 1100kv motor and max 6,, I like your 39 tooth spur what would be a good pinion?
It would be nice to share motor temps on the speed gear.
I never use lipos less than 100c.
Beem nice if the shell wood fit with my 3s hardcase now iv got to try find lipos that will fit so i sold the typhon if arrma cant make a rc that the shell will fit without a handache ill part ways with it
I have had a couple of people mention this now! Seems to be a massive issue to a lot of people! I would have also thought the typhon shell would accommodate 2x 3s hardcase and that is disappointing on Arrmas side.
Wicked mate.must be utter frustration like hitting 99mph going for 100mph only 1 mph difference.did you update the skyrc gps like I said makes it update 10x faster and more accurate so you probably did hit that 70mph if not haha
Exactly couldn't believe that! All I needed was a gust of wind to push it that little bit further 🤣. I had a go and the computer didn't recognise it will have another go tonight 🤔
@@beyondRC need out give me a shout
Will do 👍👍
Whats in the little black bag around 8.58 mins in?
100mph is easy m8. You have the place all you need is the gear and a little luck. Maybe try some hoon 42/100 tires all around. Install a castle cap pack. And i think you can hit 100mph with same electronics. My limitless hit 140 first hit.. castle 1717 motor mambaX. Then i wrecked it trying to do a repeat. Lol tire blew. Good luck!
Will have a look at those tyres. From what I have seen on the arrma forums I may have to run the limitless gearing or spool gear and much larger pinion and maybe on road tyres?? This high speed stuff is new to me I ran 1/8 trucks on 6s for years but have a lot to learn when It comes to the speed run side of RC so i appreciate all the advice and support along the way and hopefully recording my journey will help others to do the same! Thanks i will check those tyres out!
@@beyondRC when it comes to speed there is only one thing you need to understand.. checklist! Lol... my friend put it this way once. “Speed runs is like going on a hot date with a bombshell for the first time while being a virgin” lol.. “you only get laid when everything goes right” hahaha for me personally what made the difference in managing my cost per pull was getting a high pov and dji fpv. Im returning to the car hobby after ascending the accolades of “fpv drone freestyle.” I bring a lot of fpv freestyle best practice back with me to rediscover my long lost love for rc. This year alone i picked up every single 6s 8s Arrma got reconnected with my kyosho Inferno GT this time electric. 2 xmaxxes so that the wife and kid can come along and play. Been doing bashing (my original love) and tempting faith (my horror story with rc 5k dream build went up to smoke the main reason i stepped away from rc cars)
To make a short story long. What I realize about the drone and rc car community is this. We need to start talking more with each other. Because I sincerely feel we can bring good things to each others passion. The telemetry and black box tuning will change the rc car community. Which i notice some of the hardcore rc car guys are taking a dab in. Another part of this evolution i forecast is some sort of “flight controller” or “driver aid” you can see this with the esc smart function. I think a drone guy right now as we speak is building a driver assist system that can control all 4 wheels dynamically to provide the best possible driver experience. Just like real cars today. Its going to be able to lower or raise itself and have dynamic electronic dampers.. a esc cannot account for all of that we need a “driver assist” computer. Anyways cheers budd good chat sorry for the long 10 page later
What would you recommend for off road? The stock pinion? And how fast you rejcon it will do over grass mate?
Your chargé pinion ta 25 i thing bater sir. If me to 25 is thé bast view ôwesoma bro 😊😁👍👍👍
wanting to get one of these but i need a left hand steering remote. any advise for that please ?
Get a fan for your motor brother, then u will be fine
Is it true that it's risky to use the 20t pinion? I heard that it's much higher chance of damaging your car when you put the high speed gearing in
From what I've read others say, anything over 20t and you'll definitely need a good fan on the motor and you'll be limiting your self to a few speed runs before it starts getting too hot. People have been putting 26t on them but I don't think the system can handle it.
DO IT
I will! Aiming for 100 this year!!
Great video! I give channel shoutouts on my Facebook group RC Car Life. Your channel is my latest shoutout. Keep up the great work 👍🏁
Looking at getting one of these. Is there anything better for the money that’s RTR and can handle been bashed around a 1/8 buggy track? Are the new ones bulletproof?
Nothing is bullet proof but the typhon in my opinion is the best 1/8 buggy on the market!! I have both in 3s and 6s absolutely love it and worth every penny
Thanks for your reply, I live next to a 1/& buggy track so it’s the perfect bashing area. Just got an LC EMB 1 and have the brushless mini t too
I might take the plunge for the arrma I think
Have to agree. Think it really is the best 1/8 buggy on the market especially in rtr form 😎
That’s me sold then it was either one of those or something like an Agama / Losi 1/8 electric
You will love it I have in both 3s and 6S and two buddys with the 6s platform and everyone is extremely happy with it!! You won’t regret it that I promise!! Have fun!! And ur some lucky to have a track next door!! 🙂
Get a set of 100c 6000mah lipos, guaranteed to pass 70.
thats the plan ;) Any recommendations?
Hey, i never tested stock motor and ESC from spektrom, i changed to tp and hobbywing at my first run is it any good?
I would say so but I have never tried the hobbywing max 8 which I'm guessing you are running..
@@beyondRC max 6
@@beyondRC 8s hehe
The video is so cool. friend
Become a thriving channel.
Let's get along
친하게 지내요. 😉👍😉😉😉😉😉
Thank you!
Get a fan and change the batteries and you will hit 70+mph
69. Nice
The Hoons tires are smaller diameter and will not help you gain a higher speed. Though they do feel more stable at speed. I say balance the tires that are on there and you will crack 70mph no problem.
Cheers for the info. I did some research and also realised this and if I was to go hoons would have to look at my gearing to compensate for the smaller tires 🤔
@@beyondRC Just to let you know the gearing that I’m using now with the hoons is 20t pinion/46t spool. That has compensated enough for me after switching tires. Just recommend a motor fan to help keep temps down.
The surface of the road you are running on is creating a lot of drag . that is probably why you are not going 70 mph .
i am currently looking at some new spots as i want to turn this into a 100mph build ;)
Good video but you honestly talk too much
Way to much talking ans not enough action