Too bad we have to use many parts of the standard frame. I would prefer to keep the standard frame complete and only move the laser head itself, or buy a second laser head, so I can use both setups.
Hello, I'm having major problems after using the X and Y axis extender for my S30 Pro Max. The problem seems to be that the Y axis is not working correctly, they still run both but after a while they are no longer accurate, they are misaligned causing the cut product to be damaged. The attached photo shows this problem. We have installed the extended upgrade kit as shown in the video tutorial but it is still not getting better. Please help me solve this problem in detail. Thank you and waiting for your response. Sculpfun S30 Pro Max users
I have an S30 pro max laser engraver, I bought a 900x920mm expansion for it. I put it together based on the video and the error is that the y axis starts jumping after a while.
Pour le futur ,ceux qui vont acheter l'extension , dans la vidéo , il faut tourner le potentiomètre de 90⁰ à un moment , ne le faite pas laissé comme il est et tous fonctionnera très bien . Il y a une tension de synchronisation de 0.9v-0.8v a mesurer entre l'USB et le potentiomètre , si vous les touchez , vous déréglé la synchronisation .
If I buy this 900x920 expansion kit, can I use just the Y axle expansions from it, to be able to make it 400x920 size and have the X axle expansion for spares if I need to cut bigger? Or building the 400x920 version is just possible with the Y expansion kit?
I put mine together just like the video shows, now when I try to cut or engrave a bigger or complex item it will cut two lines but not on the same line. It skips and cuts into a line it has already cut. What can I do to fix this problem? I did not have this problem with the smaller regular size S30 pro set up.
Die Probleme habe ich auch wenn ich mit weniger 700mm/m arbeite. AB etwa 700mm/m aufwärts ist alles gut was fürs schneide zu schnell ist um in einem Durchgang durchs Material zu kommen. Hab es selbst versucht das Problem mit einer Welle zwischen den beiden Y Antrieben zu lösen nur besteht das Problem weiterhin. Bin sehr enttäuscht über die X Achserweiterung ohne die ist alles super. Schade um das Geld.
Mi cable original de la s30 ultra trae 6 conectores 3 rojos y 3 azules y uno negro el cable de el kit de expansión solo trae 4 😥😥😥😥necesito ayuda de como conectarla
Hola buen día, disculpe tengo una duda, yo comencé con una maquina Sculpfun S9, pero con el trascurso del tiempo la he mejorado, actualmente mi maquina la tengo adaptada con el Kit de cabezal de 33w, mi pregunta es, este Kit es compatible con la Sculfun S9 con cabezal de 33w?
I just received my s30 pro max and i haven’t put it together yet because I went ahead and ordered the expansion kit (905mm x 915mm). I did it this way because I figured at least this way I wouldn’t have to take it apart to add extension kit. My question-will I be ok just going off the normal directions or will it be different since I’m setting it all up together initially?
Sorry it is difficult for us to judge the cause of the problem from your description. 1. You can join the sculpfun fb group and post a detailed description & pictures of the problem: bit.ly/42q5rwO 2. Or communicate with our after-sales staff by email: support@sculpfun.com
Hello, i have buy the expansion kit with my S30 Pro Max and there was the plastic hose inside, how can i get the rubber hose, because the hose keeps kinking, bought on 4/7/2023 at Geekbuying. Greets
Is there anyone here who has assembled the 935x900 and has had success? I've had limited success on small jobs, but anytime I stretch the laser area, it fails miserably. The component that slides left/right on the carriage beam seems really tight...way more than the original carriage beam.
Yo lo adquirí tengo un láser s30 pro Max En primer lugar no me gustó se tenga que desarmar el marco donde va el láser, el segundo eje que se le agrega esta muy tenso si lo aflojo tantito o las bandas se hace todo es un descontrol, de cuando mandaba hacer algo. Tampoco me gusto que no viniera el fierro que sostenía a ambos ejes, porque al momento de hacer algo no se alienan por más que los acomodes. puse las medidas del video y el láser siempre se detenía en algún punto y no trabajaba, cuando la iniciaba también se detenía y no llega al inicio me decía error por no llegar al tope. Y resulta que ahora mi láser NO hace nada, los programas detectan a mi láser pero no se mueve en lo absoluto ya llame un técnico y nada le encontró nada. No se qué más hacer, alguien sabe qué hacer? O alguien más le paso lo mismo que a mi?
Leider überzeugt die Funktion der Erweiterung nicht wirklich Bei Geschwindigkeiten unter 700mm/m gibt es zu großen Ungenauigkeiten der X Achse. Bin sehr enttäuscht über die Anschaffung hätte ich das gewußt hätte auch ich mir nur die Erweiterung der Y Achse gekauft.
If the X-axis is too different, it may not be adjusted properly. If the Y-axis jumps, it is basically the asymmetrical position of the engraving at the beginning. If you need more help, send email to: support@sculpfun.com
Too bad we have to use many parts of the standard frame. I would prefer to keep the standard frame complete and only move the laser head itself, or buy a second laser head, so I can use both setups.
Hello,
I'm having major problems after using the X and Y axis extender for my S30 Pro Max.
The problem seems to be that the Y axis is not working correctly, they still run both but after a while they are no longer accurate, they are misaligned causing the cut product to be damaged.
The attached photo shows this problem.
We have installed the extended upgrade kit as shown in the video tutorial but it is still not getting better.
Please help me solve this problem in detail.
Thank you and waiting for your response.
Sculpfun S30 Pro Max users
I have an S30 pro max laser engraver, I bought a 900x920mm expansion for it.
I put it together based on the video and the error is that the y axis starts jumping after a while.
adjust the wheels of you carriage
Me pasa lo mismo, aún no he solucionado
Nici Sculpfun nu răspunde la mesajul nostru, rușine 😮
Pour le futur ,ceux qui vont acheter l'extension , dans la vidéo , il faut tourner le potentiomètre de 90⁰ à un moment , ne le faite pas laissé comme il est et tous fonctionnera très bien . Il y a une tension de synchronisation de 0.9v-0.8v a mesurer entre l'USB et le potentiomètre , si vous les touchez , vous déréglé la synchronisation .
Is there no settings to tell GRBL that you now have two Y axis motors??? I didn’t see any mention of setting this up
I'm having the same problem, did you solve it?
can you help my nev y axis left and right side going oposit vay :/
I really need help with changing grill settings
when using the rollerthing do i unplug both y axis motors and do i have to screw back the little screw on the pcb ?
I didn't get an upgraded hose. It's the same low quality plastic as the original.
it's an old package. Same happend to me.
@@michaelkohler3584 I emailed them and they sent a replacement!
@@NeverEnoughShowbuy you by geekbuying, how is the email. Greets
30 Pro Max I am installing the expansion kit and found I do not have a screw to increase motor power. I see I have jumper pins. What to do?
If I buy this 900x920 expansion kit, can I use just the Y axle expansions from it, to be able to make it 400x920 size and have the X axle expansion for spares if I need to cut bigger? Or building the 400x920 version is just possible with the Y expansion kit?
Does this fit the S30 Ultra?
Sorry no.
I put mine together just like the video shows, now when I try to cut or engrave a bigger or complex item it will cut two lines but not on the same line. It skips and cuts into a line it has already cut. What can I do to fix this problem? I did not have this problem with the smaller regular size S30 pro set up.
might be an issue with belt tension or the table is uneven
@@elijahdungan3612 Thank you for advice, I will consider those factors when I decide to put it back together.
Die Probleme habe ich auch wenn ich mit weniger 700mm/m arbeite.
AB etwa 700mm/m aufwärts ist alles gut was fürs schneide zu schnell ist um in einem Durchgang durchs Material zu kommen.
Hab es selbst versucht das Problem mit einer Welle zwischen den beiden Y Antrieben zu lösen nur besteht das Problem weiterhin.
Bin sehr enttäuscht über die X Achserweiterung ohne die ist alles super. Schade um das Geld.
Exactement le même problème !!!!!!!!!!!
Mi cable original de la s30 ultra trae 6 conectores 3 rojos y 3 azules y uno negro el cable de el kit de expansión solo trae 4 😥😥😥😥necesito ayuda de como conectarla
Hola buen día, disculpe tengo una duda, yo comencé con una maquina Sculpfun S9, pero con el trascurso del tiempo la he mejorado, actualmente mi maquina la tengo adaptada con el Kit de cabezal de 33w, mi pregunta es, este Kit es compatible con la Sculfun S9 con cabezal de 33w?
Yo pienso es que tu mismo tienes que comprar el kit, si no te funciona solo regresalo asi sabras si funciona
I just received my s30 pro max and i haven’t put it together yet because I went ahead and ordered the expansion kit (905mm x 915mm). I did it this way because I figured at least this way I wouldn’t have to take it apart to add extension kit. My question-will I be ok just going off the normal directions or will it be different since I’m setting it all up together initially?
Sorry it is difficult for us to judge the cause of the problem from your description.
1. You can join the sculpfun fb group and post a detailed description & pictures of the problem:
bit.ly/42q5rwO
2. Or communicate with our after-sales staff by email:
support@sculpfun.com
Thank you!
Do you have a X-axis switch extension cable? I'm using the Y-axis extension kit.
Not selling alone for the time being, you can find the extension line of the same port on Amazon or local malls.
When you put the power harder , do you need to need to turn both screws 90° ore just one?
What do you mean? Laser head screw? Both should be tightened. If not, please attach the video time
Have the same question, they mentioned em in plural, I'm scared jajaajajaja jajaja. Please tell me your results.
@@lizettefernandez7858 5:08? Sorry! Poor English. Just turn the first screw on the left.
5:08? Sorry! Poor English. Just turn the first screw on the left.
@@党一哲Thank you, I noticed the plural as well and was a bit paranoid. thanks for the answer- this should be a pinned comment/answer!
Does this extender fit the sculpfun s9?
Sorry no
Quero comprar uma ja com o kit de extensao 9nde comprar
i love this!
😘
My sculpfun didnt come with a laser
Hello. does it work for s9 model?
Sorry no.
Hello, i have buy the expansion kit with my S30 Pro Max and there was the plastic hose inside, how can i get the rubber hose, because the hose keeps kinking, bought on 4/7/2023 at Geekbuying. Greets
Is there anyone here who has assembled the 935x900 and has had success? I've had limited success on small jobs, but anytime I stretch the laser area, it fails miserably. The component that slides left/right on the carriage beam seems really tight...way more than the original carriage beam.
J’ai exactement le même problème : des décalages avec l’extension !!!!
You have to turn the screw on the motherboard to increase the volts
@@vojtatesar6204can you go into more details is there a video on how to do this
@@ShopDog1021 ruclips.net/video/JIZa6yzob7k/видео.htmlsi=e3-M9zPZcpo_mcG1 5:10
Me llego el motor con giro invertido, es un problema
aun tienes ese problema ? yo lo pude resolver :D
@@ausurero como lo resolviste cuando pongo mi máquina que vaya ala derecha se va ala izquierda
I've had nothing but problems since i upgraded to a larger work area😡
Yo lo adquirí tengo un láser s30 pro Max
En primer lugar no me gustó se tenga que desarmar el marco donde va el láser, el segundo eje que se le agrega esta muy tenso si lo aflojo tantito o las bandas se hace todo es un descontrol, de cuando mandaba hacer algo.
Tampoco me gusto que no viniera el fierro que sostenía a ambos ejes, porque al momento de hacer algo no se alienan por más que los acomodes.
puse las medidas del video y el láser siempre se detenía en algún punto y no trabajaba, cuando la iniciaba también se detenía y no llega al inicio me decía error por no llegar al tope.
Y resulta que ahora mi láser NO hace nada, los programas detectan a mi láser pero no se mueve en lo absoluto ya llame un técnico y nada le encontró nada.
No se qué más hacer, alguien sabe qué hacer?
O alguien más le paso lo mismo que a mi?
😔 It worked for me and then it stopped working
Leider überzeugt die Funktion der Erweiterung nicht wirklich
Bei Geschwindigkeiten unter 700mm/m gibt es zu großen Ungenauigkeiten der X Achse.
Bin sehr enttäuscht über die Anschaffung hätte ich das gewußt hätte auch ich mir nur die Erweiterung der Y Achse gekauft.
If the X-axis is too different, it may not be adjusted properly. If the Y-axis jumps, it is basically the asymmetrical position of the engraving at the beginning.
If you need more help, send email to: support@sculpfun.com
GROS PROBLÈME DE DÉCALAGE AVEC CE KIT D’EXTENSION !!! AUCUNE SOLUTION N’A ÉTÉ TROUVÉE…😢😢😢