Broke into my Charger ScatPack 392 & tried DISCONNECTING Car Security, but it was HARDWIRED🤬...
HTML-код
- Опубликовано: 25 апр 2023
- #knockout360 #dodge #dodgecharger #hellcat #carlock
SUBSCRIBE to The Channelbit.ly/37gcryL
Broke into my Charger ScatPack 392 & tried DISCONNECTING Car Security, but it was HARDWIRED🤬... 2020 Dodge Charger ScatPack 392 & 2022 Dodge Charger ScatPack 392 HARDWIRED Carlock security systems INSTALLATION guide! (MUST WATCH)...
Follow Me on:
*TikTok - bit.ly/3NxsXzF
* Instagram - bit.ly/386Oxf4
* Twitter - bit.ly/3sS7YQ1
* Cash App -bit.ly/3tdhuh1
* PayPal - bit.ly/38C0iL2
CarLock Car Security System Links/Codes:
+ CarLock Amazon store: bit.ly/knockout360cl with the discount code for 10 % off CarLock on Amazon for your followers: KNOCKOUT360
+ "Will CarLock work with your car?" Visit the official CarLock page: bit.ly/knockout360carlock
Epidemic Sound Referral Link:
www.epidemicsound.com/referra... - Авто/Мото
But bro you just showed them where it is 😩😂 these videos are further educating these criminals
I just hate we have to even go through all of this. 😩🤷🏿♂️
True but thieves don't have any bad things happened to them. I seen where a guy had his truck stolen,and had air tags . And was able to find his truck. They both had guns but the thief lost .Dirt nap was his prize.
@@lamontpearce170 Did the other guy catch a case?
@@fba7993 No the law didn't do anything. He had called law and they showed up after it was taken care of
That’s why you get AirTags as well on top of whatever you got
Use the ODB spliter my guy! It will route carlock to be concealed and the splitter will give you an open ODB port.
I was just gonna recommend this
I dig these cars, but I have to wonder if the headache is worth it -- especially if you don't have a garage to put it in.
I hardwired mine as well and it works good with all the features....Thanks for the video👍
Good video but if I was you I would take it down. You just showed the thief’s how to steal your car if someone wanted to target you. If I put a security system in my car I keep it to myself. I hate see your beautiful Mopar stolen. Please just take it down. If you want to give good security advice just tell them to be very creative when installing an alarm system. 👍
Any thief would easily find this. I’m certain he has a tracker and kill switch that is somewhere difficult to find that isn’t in the video. No matter where you put the kill switch if it’s spliced within a couple feet of the start button or the ignition relay they can just resplice the cut wires. This is just a monitor that alerts him that the car is being messed with. I’m certain there is a second gps tracker and one or two kill switches that aren’t on the video.
Ditto I bought a kill switch but it's so many vids on here I'm debating on putting it in. He's helping tho so I get it. I just wish it was another way to make these vids
Facts
@@Akron2PDX they should be made without showing the exact location. In a lot of videos you see them putting it in the same location so you have to be creative on making it very difficult for the thief’s.
@@rustyshaklferd1897 key here is having multiple security layers which adds time to the thief prevention a quick getaway. Never rely one just one system
Great video brother! I’m glad there’s more security devices coming out for our mopars. As a community we gotta take a stand ✊🏻
Yeah, cause you know that Dodge ain't doing a thing to protect us.
Man you guys got a lot of expensive and fancy ways to avoid just installing a simple kill switch.
The engine start and vibration detection will eventually start back working. I hardwired my carlock and it began working correctly after a day or two. Love the videos bro.
How did you hardwire it? I was thinking of doing my directly to the fuse box using a fuse tab
Need to add some bright ass lights in the inside and a train horn. That way they'll be blind & confused when they set it off.
😭
Sounds like a great idea😂
Honestly, I was a car thief in the late 80s early 90s and if i broke into a Transam and bright lights and then a train horn started going off ,It would screw me up because i easnt expecting that and id be gone ,Alarms themselves with a 2nd person i can break in and have the horn killed quick ,but a train horn i think would make me forget this car lol
I just got my carlock yesterday and love it so far setting things up now I also brought a anti -theft car locking device safety belt steeping wheel lock
Run a spliced wire from the OBD itself under the carpet and up under your driver seat. This way it remains in the cabin, hopefully still sensitive to movement and vibration.
Have you tried the ODB splitter which allows you to plug your Car Lock in plus all you would see is the in put from the splitter.And your CarLock can be hidden out of sight.
That's good, im glad that somethings is on a Dodge Charger owner's side. Great video.
Personally just speaking from my pov my car 60k I wasn’t wasting time or cutting corners on security with car lock I just dropped da bag on 1k alarm system with all the bells an whistle’s. Just don’t won’t to depend on 50 bucks alarm vs an tried true good hard wired alarm gps tracking alarm . Just my pov stay safe brothers
I feel You …!! I’m on the same mindset drop the bag and sleep well at night 💯💯
OBDII Splitter Extension Y Cable is what I use for hardwired GPS in my works trucks. The OBDII port looks factory & the car lock will be hidden inside the dash! I run the GPS & SCT Livewire TS+ at the same time with no issues
2 questions, can you install both?, and have you called Tech Support, and ask for recommendations (if any) on getting around these issues?
I'm getting a compustar in the following weeks, I have a few questions in this video while being hard wired did you have the carlock tags as well? If so did that help with the sensitivity. Did you get the ghost lock in the Helly?
I noticed the same thing when I hard wired mine . Going back to the OBD with the splitter cable cuz I also have my tuner plugged into it.
Great video I was wondering is it possible for you to splice into the obd 2 port so you can run a line somewhere that can’t be seen then all your functions work and your port is still open
Could you use it on both if you got 2 where if they unplug the front one you can still track it from the back?
Bro, I really appreciate your content, I was wondering because I jus got a 22 scat and so paranoid of theft that I don't even drive it...but would it be overkill if I had 2 car locks install...one through OBD, and one hard wired..
Great video and thanks
Mine is plugged in
Have a 22 charger scat. Car lock is hardwired from the battery and I still get all the notifications no issues.
Did you do it via a fuse box using a fuse tab?
You could hardwire to the battery and use the splitter off the hardwire to run into the cabin in the car.
Can you run 2 devices of CarLock at the same time one OBD and the other hardwired?
Dome light, driver seat both have constant 12v. I would recommend hiding it in one of those places. Under the seat would be very hard to find.
1st and yes it becomes slower/less responsive
Sad but true man
Exactly the video I was looking for. Thanks bro for the help. I eat Doritos too 😅😅😅
What’s the color on that red charger ? Is it torred?
You should use the splitter and run it remotely. If you tuck that wire away or even shrink wrap it to the main OBD the bad guy probably wont even notice. He will just see an open plug and go on.
Rubix and Knockout the ultimate mopar duo
I actually brought a splitter so it two cords that turn into one that plugs into the obd but i never installed it so it hasn’t been tested
What about A car lock tag do you still lose GPS signal?
Run the + wire to a ignition powered wire straight a 12v relay switch and then to a bus bar so you can have extra expandable terminals. This is when you gotta listen to car audio guys. You won't lose any features if you hide it a concealed location in cars cabin using velcro. Yall are welcome.
Ima need you to stop eating in your car bro😂😂 great video though
I have my challenger like that but I don’t have to use any wires or extra stuff
I use 3 air tags and placed around my car and use a dash and rear camera
No one said this is steal proof but it can help buy time, some thief’s may just leave the car alone if it gets too difficult or the car lock will alert the owner if the car is being messed with also. I think adding layers of security will be the best bet
Just do a all inclusive alarm my dude. Make car lock ur secondary device.
Having it hardwired is gonna have it pull ~12 volts all the time. It may jump up to 14-15 volts when the engine starts. I'm sure the device actually connects to the PCM/ECU while inserted in the OBD2 port. That's why you get the engine start/stop alerts. What you need to install is an ODB2 bypass cable to connect it to instead. That should maintain the functionality, except for possibly the vibration.
This is how I have it and you right, it maintains all features but I do want to hard wire it via fuse box using a fuse tab. What do u think?
Can you follow them on GPS through your Uconnect
Good video bro if I have go through all that just keep car being stolen when thevie see this video they no what to do just not worth my peace of mind this why I sold mine
With the hardwire can’t you buy their vibration sensors for $20 and install them throughout the car? I thought Rubix did. Not sure about the hardwire and startup sensor not working, but then again the kill switches work.
What if you used 2 car locks, 1 where you normally plug it in and the second one hard wired. Would that work?. And if a theft found the first one he wouldn't look for another, I think.
Im having my ODB relocated.. then plug in a splitter so I have 2 ports both hidden in other locations
Z Automotive By-pass cable will do everything you front OBD2 does
Hey knockout. Your boy that had the full alarm system set up with 24/7 gps. Can you give me details on that?
4air tags take it I’ll be right behind them like Jason!
Knockout 360, develop an OBD cover and lock 🤔 so that it can stay where it's at it maximum use.
1st take the transmission release cable unhook it and push it back up in the dash, buy a obd2 extension cut everything but power and ground, remove stock obd plug and put the extension in its spot and hide the real one with the extension plugged into up in the dash, now you cant roll it off down the street and its completely impossible to copy a key because their connected to nothing more than power, zero data connection
IGLA pincode system is 1000x better, car lock is a stick in a bucket compared to IGLA
Can you install them in yourself or you need a car electrician?
The voltage tells the device that the engine had started. The car has a voltage regulator (resistor) attached to the battery negative that is responsible for charging the battery when it drops to a certain point. It needs to be hard wired to a constant 12v source but not directly to the battery. That wY the voltage will read the engine/alternator output instead of the battery's voltage. The OBD port hookup only provided the constant 12v power and negative just like the pigtail. Location will play a part as far a detecting vibrations in the cabin.
Hard wire it to the uconnect. You'll have to take apart your dash and get to the wiring of the radio, but it'd better there. Thieves won't have time to take apart the dash even if they knew it was there
I bought some metal zip ties. Whenever I install mine I'm going to use those.
Bro I love that wide body. But I just COULDN’T get those plain cloth seats in my scat. I can’t believe dodge even did that.
Worst decision Dodge ever made
The cloth seats are nice. They wear well.
There so ugly I didn't like them the alcatera is better
@@martieholmes2424lmao spoken like someone who bought cloth seats. Cloth seats are hideous.
Knockout, Z Automotive has OBD port pigtails that will reach into the trunk. This way you can still use the full functionality of CarLock.
That’s what i did..i works within 10 seconds
What if you have a call like tag
Is it going to drain your battery?
I'd put bullet-proof glass locking doors, an air tag, and a gas system. Soon as you try to steel it night night 😂😂😂
I was just about to comment that .having it In the trunk it will a have lack of vibration sensitivity in the front. . And if you have your spare tire on top of it to . . They should create a clone so you have 1 in each obd
Mine work in my trunk within ten seconds im notified but i have the double bypass from zautomotive and it works..very easy install
You could also just power it from an empty slot in the fuse box.
Sick another ad
Yeah its basically a GPS module now. It reads everything else from the OBD.
Carlock would be epic if the vibration detection worked right, since it didnt for me it was basically useless.
I can't believe the amount of car thefts in Charlotte, NC. I thought the South was much safer. This is like NYC or Philly, looks worse.
You could try splicing wires directly under the dash board. There are several 12V and negative cables under the dash that you can tap into. I would just add a fuse in series with the device just in case you have a surge in the system. that way your security system is inside the car under the dashboard and out of sight and I’ll also free up you’re OBD port.
The car lock in the obd port if fine for notification that the car is being messed with even if they unplug it it still serves that purpose. I’m sure you do, but having a secondary gps tracker and at least 2 kill switches that are hidden and not spliced in near the start button or ignition relay. There are many good places for the tracker and the kill switches. If you remove the rear seat you can wire a kill switch to the fuel pump. Once car lock alerts you they won’t have time to remove the rear seat to find it even if you leave a note telling them where the switch is spliced to the fuel pump.
And you don’t need a physical switch to the fuel pump under the rear seat. You can wire a relay under the rear seat wired in a normally open configuration and any wireless device to close the relay via a remote control to power up the fuel pump.
Kill switch, airtag with the speak out you're good to go. Don't waste your money on anything else!!!👍
You remind me of Dom Kennedy bro
But they can still find it if they're thorough enough, when they stole my Scat, they stripped the entire Dash and gutted it search for GPS and cameras, re-routing if they know their shit.
This is why I recommend wireless GPS devices, Yes cheap Apple Air tags and Samgsung Smart Tags work, but aren't 100% reliable like a Real-Time GPS that constantly update. Most of these thieves steal your shit early in the AM, when most people are still sleep and Most people are on the road, so Airtags at those hours are useless, I would know.
My Scat was stolen a little over a month ago, around 2am in the morning my wife hears my car start up and it take off down the street. Yep, I found my car, but only a few hours later I got a hit, luckily it was still in my city, hell if they were from out of town, by time I got the hit I could had been out of state. So yeah, I had to upgrade to a real time GPS, I still keep the smart tag as a back up.
Great video…but there’s no way in hell I’d do this myself……why not spent an extra two or three hundo’s to have a professional who has been putting alarms in since the 80’s….gotta be a shop in Charlotte.
It will still be able to tell when the engine starts
Yeah I wouldn't be telling everyone my set up. The best alarm system is a is a custom system that you dont talk about!
Lol does insurance cover almost thefts?! 😂 sounds like out of pocket payment
A few moments later...His car was gone...😂😂😂
😂😂😂 biscuit crumbs
Like ur videos but isn’t more safe to just get an alarm and gps tracker
when thieves cant steal them and drive them off, they will do what they did in the 70s and 80s, they will use flatbed wrecker trucks to just snatch them up and haul them off. an old school way to stop the car from driving around is run a heavy chain around the steering wheel and under a seat... unless they have big/heavy bolt cutters, or a tool box with the tools to remove the seat, they aint goin too far.. this would be something u could do when u park the car at night.. another way to easily disable the engine is remove the starter relay.. if a thief cant get it started fast, they arent going to be out there trying to figure it out. the laws need to be changed so that breaking into a car is a felony.. in most states it is a simple misdemeanor.
There’s another way that takes 5 minutes and you keep all your features and still have your port available
That's none of you're business 😂😂😂
Could you put 2 cars lock 👀👀👀
Get the IGLA
Just run 2….inside ur car an in the battery…i would for any scat or hellcat
What about two car locks 👀
Man just put pit bull chain on your wheel to the chair anchor
The things we have do to protect our investments 🤦🏾♂️
By you showing this video, the car thieves can see that
Just run it back to the inside and hide it and see how it works , under the seats , in the armrest or glovebox
Its 10 bucks month thats worth it the uconnect is 27 and doesnt nothing
Lock
I’d have to put an air tag under the carpet in the trunk
Tell carlock to start making tags again
Somebody broke into my scatpack monday , went through my sunroof.
What city
Same here, they broke my rear glass but couldn’t take it.
@@mauricehill1911 auto or manual?
@@bumpylump9236 Auto
@@mauricehill1911 ight
He never show his car 😂
just get two car locks so it looks like you only have one
Just get a tazer
No you don't I hard wired mine and connected to longer wire and ran it to the inside of the car hiding the wire thru the panels and have all my features still engine start vibration etc just get longer wires connect it to the end of the car lock wires and hide it somewhere in the inside of the car
Did you do a fuse tab hard wire?
The fact you have to do all this for a car. Mopar sports cars are cool, but this is ridiculous.