Great vid. Wanted to say that if memory serves on the dbxle lowers shock mounts are reversed on each side. You’ll see that one side is silver and one black. The silver is reverse thread. Really like your set up!
Might have to add proline decals on my front fenders looks like a classy fit and I got plenty of them from all my proline 1:10 and 1:8 scale buggy race kit tires and wheels. Eventually this summer I’ll grab some new body panels so I can change the paint theme.
You may wanta add dgi 1" wheel spacer. Helps get the wheels away from body. Plus its little wider an stable. Also a monster center spool helps alot. Rear shields for a-arms to protect your axles boots an shocks. Dont know if you seen them. But guy on ebay makes window nets. He outta poland. Red an black. They look good.
I've had mine for over a year now and it defiantly doesn't look like new any more. It's had it share of crashes, breakage and mods. The rear wheels more than likely won't touch the body, but the front ones will. Like what's already been stated, get the hub extenders. I would also recommend aluminum diff housings and mounts. Upgrade the bearings, stock bearing don't last. Edit: The screws for the shocks, if you notice, one is black and the other is chrome. The chrome one is reverse threads. It's like that on the front and rear.
Just a heads up you said the shock screw doesn't want to come out where it mounts on the a arm. One screw on the front and one on the back are reversed thread that's why it would just spin and not come out. I think the reversed screw is silver and the regular thread are black.
Hello gray Sr. to another gray Sr...how do you like those tires I just picked up one myself and looking to do as you did...smart modes only. I bash on loose dirt, dead grass not sand if you have used those tires there how do you work? Thx Sir
I really want to buy one of these, but I know the moment I do it'll be broken 20/30 minutes later. I have two laser nut, ones broken. One always wants to be. The plastics now a days are too brittle and don't last. I know as soon as I take it out I'll have broken parts just like on my other Losi products. 😢 i'm just not going to buy another Losi just to watch it break. Might save up for an XRT see if that plastic is any stronger. 😂
I think 50,000wt to 100,000wt silicone diff fluid in the center diff and 20,000 or 30,000wt in front/Rear diff would be good. WD40 would clean and protect also. Just spray it down, an blow off with air compressor. Have fun man, you seam like you are!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Very well modded and looked after motor! Nice work!
Inspiration. I’m literally doing the same mods not going to crazy. Thank you
Great vid. Wanted to say that if memory serves on the dbxle lowers shock mounts are reversed on each side. You’ll see that one side is silver and one black. The silver is reverse thread. Really like your set up!
Awesome RC you got there, nice upgrades, they really do the model well 👍🏼
That is a sweet car my friend !!
I really need this car in my collection. Great vid too.
They need alot of upgrades...I wish they would offer a roller with the upgrades on it without electronics like arrma does with its exb line
Might have to add proline decals on my front fenders looks like a classy fit and I got plenty of them from all my proline 1:10 and 1:8 scale buggy race kit tires and wheels. Eventually this summer I’ll grab some new body panels so I can change the paint theme.
Is there some reason why you’re not relying on the low voltage cut off of the ESC?
What happened to you?..can you show us more of the DBXLE?
Nice buggy I own mostly 1/5 scale gas but I’ve always liked the looks and performance of that Losi…
Very nice car man….looks good!👌
I bought one to and was wondering where did you get the glas voor the light bar?
Greets Richard.
I believe those tires/wheels are the ProLine Masher X HP, yes?
You may wanta add dgi 1" wheel spacer. Helps get the wheels away from body. Plus its little wider an stable.
Also a monster center spool helps alot.
Rear shields for a-arms to protect your axles boots an shocks.
Dont know if you seen them. But guy on ebay makes window nets. He outta poland. Red an black. They look good.
If i could add pic's on here i would lol.
These are a few of the upgrades ive done to mine.
You Have The Link For The Motor Heatsink?
I've had mine for over a year now and it defiantly doesn't look like new any more. It's had it share of crashes, breakage and mods. The rear wheels more than likely won't touch the body, but the front ones will. Like what's already been stated, get the hub extenders. I would also recommend aluminum diff housings and mounts. Upgrade the bearings, stock bearing don't last.
Edit: The screws for the shocks, if you notice, one is black and the other is chrome. The chrome one is reverse threads. It's like that on the front and rear.
how do you feel about New Bright RC cars?
Just a heads up you said the shock screw doesn't want to come out where it mounts on the a arm. One screw on the front and one on the back are reversed thread that's why it would just spin and not come out. I think the reversed screw is silver and the regular thread are black.
I had not set my comments on until recently, so my appologies for that. Please feel free to comment o ask any questions.
Hello gray Sr. to another gray Sr...how do you like those tires I just picked up one myself and looking to do as you did...smart modes only. I bash on loose dirt, dead grass not sand if you have used those tires there how do you work? Thx Sir
You need video stabilization.
I really want to buy one of these, but I know the moment I do it'll be broken 20/30 minutes later. I have two laser nut, ones broken. One always wants to be. The plastics now a days are too brittle and don't last. I know as soon as I take it out I'll have broken parts just like on my other Losi products. 😢 i'm just not going to buy another Losi just to watch it break. Might save up for an XRT see if that plastic is any stronger. 😂
The xrt is a beast for sure
You want to bash.. buy an Xmaxx or XRT. You wanna sick looking rig for speed runs and offloading fun, get yourself a DBXL-E
These zeee lipos after some months is dead with stock spectrum el. but 18t pinion one bat survive one dead;) Now gens ace bash 8000mah
If you don’t want those driveshafts to rust spray CRC marine corrosion inhibitor on them I guarantee you they won’t rust again.
I think 50,000wt to 100,000wt silicone diff fluid in the center diff and 20,000 or 30,000wt in front/Rear diff would be good. WD40 would clean and protect also. Just spray it down, an blow off with air compressor. Have fun man, you seam like you are!
Vehicle fusilog it a big ass toy. Get out a get a beer. Lol
you shouldn't be holding that camera...put it down!
🤤 𝘱𝘳𝘰𝘮𝘰𝘴𝘮