Off-road Lexus GX470 Roof Rack - Sherpa Equipment
HTML-код
- Опубликовано: 17 июл 2024
- In today's video, we install the Sherpa Quandary roof rack on my Lexus GX470!
sherpaequipmentco.com/shop/qu...
FYI Silicon is not needed/suggested for the Sherpa roof rack system. I just used it as personal preference.
Contents of this Video:
0:00 - Intro
2:33 - Assembly
9:19 - Install
10:49 - Custom Brackets
12:14 - Questions Answered
Magnetic Tool Mounts: amzn.to/3stCZI6
Offroad recovery equipment:
Soft Shackles: amzn.to/3ryweEr
Shackles: amzn.to/3aKby6H
Heavy-Duty Vehicle Recovery Rope: amzn.to/3ruELs7
Other Products used in the GX:
Electrical Repair Kit: amzn.to/3oh4VfS
Power Supply, 20% off code for all Speed Demon Products! (SD-02-LK): speeddemonlights.ca/products/...
Tire Deflator Kit: amzn.to/38hYaoM
1/2 in. Socket Set: amzn.to/2KW0PeY
1/2 in. Socket Set Extensions: amzn.to/3rQogqq
Locking Drawer Handles: amzn.to/39anZGy
Light Switch Panel: amzn.to/3nudCDq
Fridge: amzn.to/2W1ikMJ
Smittybuilt X20 10K Winch: amzn.to/2JZPIBe
Baofeng Comms: amzn.to/34hradT
Soldering Iron Station Kit: amzn.to/3nq9WCj
Grill Lights: amzn.to/3m7xOsV
Dash Cam: amzn.to/2KtE8ho
Tablet Mount: amzn.to/3gAtamb
Tire Deflators: amzn.to/3r1bd5a
Recovery Strap: amzn.to/3ms87n3
Air Compressor: amzn.to/3nmS3Ew
Camera Gear:
Camera #1: amzn.to/2Kcf6mF
Camera #2: amzn.to/3nnt0Bb
Lens: amzn.to/3a1j8t5
Rode Wireless Go Mic: amzn.to/2JOdDmM
Rode VideoMic Go: amzn.to/34eE5xa
Blue Yeti Mic: amzn.to/34jHWZA
Gimbal: amzn.to/3gxgixp
Drone: amzn.to/3oRTVp8
Power Tools:
Milwaukee 2 PC FUEL Auto Kit: amzn.to/34gkWLb
Milwaukee ⅜ Cordless Ratchet: amzn.to/3r2D84M
Milwaukee Drill & Impact: amzn.to/37n85Jd
Dewalt Table Saw: amzn.to/37lRTrj
Dewalt Mitre Saw: amzn.to/3nsewjM
Dewalt Cordless Sander: amzn.to/34h1az8
Skid Plates: www.okexpedition.ca/
Roof Rack (Coming soon): sherpaequipmentco.com/shop/qu...
Rear Ladder: www.nashfabco.com/product-pag...
Red Dog Front Bumper Link: red-dog-fabrication.myshopify... 
Авто/Мото
That's an awesome garage set up. I love how organized it is .
Thank you!
Everytime I see your lexus it pushes me to get mine built up. Love the build man, rack suites your build 👍
Thanks man and that's awesome, keep it going!
Perfect timing. Waiting for mine to come in!
Awesome!
I absolutely love the way yours looks! I have an 08 all stock same color and really want a similar setup. Awesome job!
Thank you!
Looks Great! Love your rig!
Thank you!
Nice install. Looks great !
Thanks!
New rack setup with the light bar looks so good!! Also, lots of ugga' duggas hahaha..
Thanks man! All the ugga duggss lol
Still patiently waiting for mine to arrive. Supposed to be within a week or so!
Badass!! Beautiful rig!!! 👍👍👍
Thank you!!
Came here for the Lexus, couldn’t stop looking at the Subaru.
wow its almost exact same rack as the victory 4x4 company out of michigan, just need a 40 inch bar now
Looking good.
Thanks 👍
450th Like bro : )
Keep it Up!!
calculated ugga duggas, perfect description ha!
haha thanks!
Where can I get those headlights? They look super clean 🙌🏽🙌🏽🙌🏽
How's your Sherpa rack holding up ? Any rust or bolts coming loose? Thinking about swapping my JW out for one. My powder coat is failing after less than a year. Never seen snow. Been in a dry Texas heat the whole time.
That STI is goals 😭
Thanks man Il try and do a walkaround of it sometimes soon
I don't know what it is about ur rig bro, and I've seen a few cool470's out there lifted with overland goodies and what not but yours is in a class of its own, cause let's face it if you don't have the right lift and tire combo on a GS they can look a bit goofy,good job nice rack
Watching from Sweden, but drive a Citroën Grand Picasso. I would love to have one of these beasts.
Thanks for watching!!
Hello
Which is more desirable the GX470, or the GX 460?
Sick setup. Garage goals. What do you do for work?
Thanks! I worked for an energy company but now I just started my own company called Blackhouse Cinema (@blackhousecinema) on IG if you want to check it out!
Sherpa actually recommends NOT using any silicone. Applying silicone the way you guys did actually worsens the seal. The whole point of their rubber foot spacers is that it creates a flat, molded seal between the rack and the roof line when the bolts are tightened down. By putting silicone around the holes you're creating another layer between between the roof line and the rubber. The silicone will flatten out as it's compressed and over time with temperature changes it will harden and create dead space and a void between the rubber and roof line. Making it even prone to water intrusion. I would suggest removing the roof rack, get rid of the silicone and reinstall the rack per Sherpa's instructions.
Okay thanks that’s good to know! Il probably try and take it off, luckily I didnt use much. I was going off a buddies suggestion but I guess I should have double checked!
@@LoganKingMedia No problem, I can see why your friend recommended silicone. Most other racks say to use silicone because they use aluminum barrel spacers as the foot. Sherpa specifically designed a rubber foot pad so that the user does not have to apply silicone. For reasons mentioned above, silicone isn't appropriate to seal the roof rack as it hardens over time and degrades. If you want to apply silicone you can put a small dab into the bolt holes but I would not apply any where the rubber footpad sits.
Enjoyed the video. How do you get power to the light bar on the new roof rack?
Thanks that’s awesome! I have the wire tucked beside the windshield under the molding, if you put a little bit of butyl in the molding before shoving the wire in it sticks in there really well.
Dude I love your bumper. I have an 07 4Runner that I’m looking to upgrade. Do you know of a bumper comparable to yours that would fit my rig? Thanks!
Thanks! I don't think they make one yet for yours but it is from red-dog-fabrication.myshopify.com/
Why sherpa over Prinsu? How is the wind noise on highway speeds?
Great video! Question: can you still use the sunroof? Thanks
Thanks! Yup you can still use it
where is that spot where you had your car under a bridge ??
Awesome setup! At 6:53 How have you wired up these lights to turn on only for a while under the car when you unlock them?
Thank you! I wired them in where the factory running board lights used to connect to!
@@LoganKingMedia awesome! Shame mine doesn’t have factory ones, I’ll figure something out with a relay perhaps. Thank you for replying!
Looks good. 👍
Did you get that bar from cali raised?
Thanks! Lightbar is from Speed Demon Lights here in Canada. It's 18,000 lumens I believe.
@@LoganKingMedia right on. Local all the way. I’m getting some custom front/ rear bumpers and skids done on my taco by danger customs here in Calgary. Was about to order from C4 but seen his work online and decided to stay local. 💪
What's the final result at night when it's lit up?
Great video🤙
Thank you!
Looks really good brother.
Dang I didn’t use silicone with my rack. Curious if it’s necessary. Think so? Did the install instructions say to?
Thanks! It's just to prevent water from getting down the bolt holes. It is just something I learned from friends along the way and they suggested it. If you haven't had any leaks yet you are probably fine but also it wouldn't be too hard to add some to each mounting location one at a time.
@@LoganKingMedia plan on it now. 🙏 solid idea! Love the Sherpa crew...
pro típ use butyl tape instead of silicone much better coverage and way less messy if you ever go back to stock or remove rack for any reason
I just found out that due to the rubber spacers they use you do not need to use silicon!
@@LoganKingMedia I just installed mine, their design is such do you don’t need to use silicone with the rubber feet. Other racks like SSO require silicone
Just getting into this and am so confused by the roof weight ratings. My 2009 GX470 says the roof limit is 130lbs. A Rhino Rack itself is like 60lbs, nevermind an awning, storage and/or roof top tent.
130 lbs while driving with the stock rack. I believe the spec on the roof is 700lbs
I was Milwaukee tool representative for years and have collect lots of tools but not the impact ratchet.
I'm hooked on Milwaukee products now haha
@@LoganKingMedia they’re great products! I’ve been using them since 2016!
Wait, are ugga duggas metric or imperial?
Metric duh
Metricccc
Is that the half height or full height?
Nice,What size your rims and tires?
Tires are 315/70r17 wheels are 17x9 -38 offset
@@LoganKingMedia thanks for your response, one more thing what lift you have and inches?
What’s type of front lower control arms you’re running?
Stock with Ok Expedition LCA skids
Who cringed and thought the Subaru canards would hit something when he backed out? lol!
You gotta look up sublime surfacing! Ted is from Edmonton and if you check his insta regarding toyotas, you'll be blown away!
Checked it out! For sure need to get that done!
@@LoganKingMedia I had it done on my LX-470 and it’s incredible! Gonna do my ‘81 landcruiser this coming spring/summer when weather warms up a bit more.
1 ugga dugga or 2?
3!!
I think you need more lights!
It's never a bad idea haha
Light bar looks 38”?
Yes correct!
Hi bro
Just put it together
Skip the details