Hello. I watched all your videos, you do a brilliant job. I start to do as well embroidery but didn’t find a good digitiser. You can recommend me someone or you do digitise? Thank you Gabriel
Hello! Thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Can you make a video embroidering an extra small child’s ball cap? Hooping and best digitizing size. I tried one and it embroiders too high. Do 8 I need to change parameter size?
Hi there! That's a great suggestion and we will be sure to pass it along. In the meantime, have you checked out this other tutorial we did? --->ruclips.net/video/kW4LfHoHh10/видео.html
Hi Lillian! You have to use the cap hoop, you just have to adjust the parameters. You also need to remove the wings, in order to use the Gen2 effectively, otherwise, the Gen 2 will hang on these wings.
Hi! If you're using a Gen 2 hoop and find that the normal cap hoop selection still positions the design too high on the brim, you may need to adjust your hoop settings.
Hi! We mostly see 40-weight polyester or rayon thread being used with caps, it totally depends. On the other hand, we see 75/11 needles being used but it depends on the design or cap you are using.
I just bought the Gen 2 and was SUPER excited about it, but I can't get closer to the brim of the hat than about 0.85"/21mm away. I can get closer with the cap rings my machine came with. I have the 2021 Ricoma MT 1501. I'm pushing the design all the way down in the embroidery field on the machine. What can I do to make the design closer to the brim? Thanks for the help!
Hey and thank you for your information, is there any difference with the Gen 2 or should I just save my money and stick with the cap ring that came with my 1502? Thank you 😀
I was told the Gen 2 does not work on the EM-1010. Why does that machine not have the same option. I dont prefer the cap driver they are so hard to hoop onto the machine and the stitching is up too high on the cap
Due to the size of the Gen 2, it is not compatible with the EM-1010. Sorry for the inconvenience. but we do have lots of videos that will help with embroidering on caps with the em -1010 ruclips.net/video/tWNFly1C2OM/видео.html&t
We used the HoopTech GEN 2 Package which you can hoop almost every type of cap with this frame, including strapbacks, Richardson caps, flexfits, structured, unstructured, visors, and many more.
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Hi there, the model in this video is the TC 1501, the payments are as low as $200 a month, our smallest model starts at $130 a month, to find out more fill out the form at the following link -> ricoma.com/us/contact-us
We recommend going through our RUclips videos, in where we show a variety of different tutorials! We have also linked a video that may help. ruclips.net/video/nl9UTNJwxLk/видео.html
Hello, when a customer purchases one of our machines, we give extensive amounts of training. Please feel free to reach out if you have further questions.
![🥇 필수 요리도안: '벨레다르의 은총' 퀘스트(가정요리) 공략 [와우 내부전쟁 1시즌]](http://i.ytimg.com/vi/Cz2DFnqFMoY/mqdefault.jpg)
Hello. I watched all your videos, you do a brilliant job. I start to do as well embroidery but didn’t find a good digitiser. You can recommend me someone or you do digitise?
Thank you Gabriel
Hello! Thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you!
facebook.com/groups/embroiderymastery
Thank you
Did you do your own digitizing? Your design really looks clean!
We do!
Excelent video! Can I use the Gen 2 other EM1010?
*The GEN 2 cap frame is not compatible with the EM-1010.
Unfortunately, the Gen 2 is not compatible with the EM-1010
Can you make a video embroidering an extra small child’s ball cap? Hooping and best digitizing size. I tried one and it embroiders too high. Do 8
I need to change parameter size?
Hi! We hope this video helps > ruclips.net/video/vfiDVj_HlFk/видео.htmlsi=wtbbA24vt2Rnw2Hu
thanks for the video is very helpfully for me, am still learning how to hoop and use my em1010
We are so glad to hear this! Congrats on your EM-1010!
Is the 8 in 1 device the only way to embroider cap backs?
Hi! Here is another video that can show you another option > ruclips.net/video/D0v6vuFDoWg/видео.htmlsi=ULvwP65kzgTmcSLz
Hi, we want to embroider on full brim hats (Not baseball hats), like SanMar C921 & NE800, can you please show how to do that?
Hi there! That's a great suggestion and we will be sure to pass it along. In the meantime, have you checked out this other tutorial we did? --->ruclips.net/video/kW4LfHoHh10/видео.html
Hi Willie, When using the Gen2 cap frame do you use CAP for the frame choice on mt1501? Or do you use OTHER?
Hi Lillian! You have to use the cap hoop, you just have to adjust the parameters. You also need to remove the wings, in order to use the Gen2 effectively, otherwise, the Gen 2 will hang on these wings.
@@ricomatv Not sure what you mean by the wings.
very informative. Could you please make a video to introduce how to do gerneral mainteinance for the machine at home? thanks.
Hi there, we have maintenance videos on our youtube channel for all our models -> ruclips.net/video/zo3_L5ZZbLw/видео.html&t
What is the device you were using to hoop the caps? The one that was mounted onto your shelf?
that is the cap frame that comes with the machines, you can mount it on any work table you'd like.
I have a Gen 2 hoop. So I need to select a different hoop setting to get low on the brim? It is still too high with the normal cap hoop selection.
Hi! If you're using a Gen 2 hoop and find that the normal cap hoop selection still positions the design too high on the brim, you may need to adjust your hoop settings.
what size thread and needles do you use to do the caps
Hi! We mostly see 40-weight polyester or rayon thread being used with caps, it totally depends. On the other hand, we see 75/11 needles being used but it depends on the design or cap you are using.
Will this round hoop work on a Janome mb-7 machine???
Hi there, these hoops come with our Ricoma machines, you would have to check the sizes that can fit your Janome.
I just bought the Gen 2 and was SUPER excited about it, but I can't get closer to the brim of the hat than about 0.85"/21mm away. I can get closer with the cap rings my machine came with. I have the 2021 Ricoma MT 1501. I'm pushing the design all the way down in the embroidery field on the machine. What can I do to make the design closer to the brim? Thanks for the help!
You might have to change the parameters on your machine. You can find how to do that through this link -->ruclips.net/video/VydAG-MCsBE/видео.html.
Hey and thank you for your information, is there any difference with the Gen 2 or should I just save my money and stick with the cap ring that came with my 1502?
Thank you 😀
Can the fast frame embroider on the sides
Hi! Are you referring to the 8 in 1?
Can you embroider the brim of the caps?
The only way to embroider the brim of a cap is to embroider the fabric before the cap is contracted. Thanks for watching!
I was told the Gen 2 does not work on the EM-1010. Why does that machine not have the same option. I dont prefer the cap driver they are so hard to hoop onto the machine and the stitching is up too high on the cap
Due to the size of the Gen 2, it is not compatible with the EM-1010. Sorry for the inconvenience. but we do have lots of videos that will help with embroidering on caps with the em -1010 ruclips.net/video/tWNFly1C2OM/видео.html&t
Does the gen2 cap clamp work on the brother prs100 embroidery machine?
It should, I would check the measurements for the embroidery machine to be sure.
How do you keep the needle from breaking in the middle seam? Also what speeds is the best. Ty
Hi there! for more great tips on cap embroidery, that will answer these questions check out this video: ruclips.net/video/BDF0Qc33hTA/видео.html
My gen 2 will not center on my machine. Could you tell be how to fix this.
Hi, please send us an email > service@ricoma.com
Hey, What hoop size did you select, cap or other? Thanks
We used the HoopTech GEN 2 Package which you can hoop almost every type of cap with this frame, including strapbacks, Richardson caps, flexfits, structured, unstructured, visors, and many more.
@@ricomatv when using Gen 2, which hoop option did you select on mt150. Thanks
We've added a link below that might be able to help on how to select your hoop option!
ruclips.net/video/N5M36jIftfI/видео.html
For the Gen 2 you didn't use tearaway stabilizer and you didn't brought out the sweatband, isn't necessary?
Hi there, since he was embroidering on a structured cap with the gen 2, you do not need stabilizer on very structured caps.
Can you gen 2 with baby lock?
Hi Jennifer, you might be able to depending the measurements.
When using sticky stabilizer, you should place the sticky side up so the cap has something to hold on to.
Hoop the piece of tear away sticky back stabilizer with the shiny side up.
Correct, sticky side facing the garment unlike what is shown at 8:17
what about embroidering on the bill?
Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery
Can you please post the file that you use so that we can test it ourselves? Thanks!
Hi! You can find files through here ---> hoopmade.com/designs
Can the m1010 do leather jackets
Yes it can!
How do you set the parameters for both sides and front
Hi there, our service techs can help you, reach out to them at service@ricoma.com
Thank you for that
You're welcome thank you for watching!
Will the gen 2 frame fit the viking mn1000?
Hi there, it would depend on the size of the Viking mn 1000, we recommend asking the distributor of your machine.
@@ricomatv Question answered below, MN 1000 is the same machine as the EM 1010
What's the total cost of the machine
Hi there, the model in this video is the TC 1501, the payments are as low as $200 a month, our smallest model starts at $130 a month, to find out more fill out the form at the following link -> ricoma.com/us/contact-us
Embroidery machine scheduling
Hi! How can we help?
GOOD TRAINING BUT FOR STARTERS DONT YOU THINK IT SHOULD BE GOOD TO HAVE STEP BY STEP STARTING WITH THE DESIGN MEASURMENTS POSITION SPEED USING ETC..
We recommend going through our RUclips videos, in where we show a variety of different tutorials! We have also linked a video that may help.
ruclips.net/video/nl9UTNJwxLk/видео.html
You didn’t even show persons how to place the backing for the hats SMH .
Hello, when a customer purchases one of our machines, we give extensive amounts of training. Please feel free to reach out if you have further questions.