What about the camera video transmitter? What about the fpv googles? How do I know if a particular set of goggles is going to work with a particular camera setup? I was so happy to find this video and finally learn how to do this but by the end I was so let down that you left out so much. Might as well glue a rock to my plane because that is the same end result I would get with this video.
Worry not! We uploaded a video last week answering those very questions! Getting into fpv can seem daunting, but it’s totally worth it once you get the basics down. Let us know if you have any more questions!
I have this setup on my UMX Timber. I like mounting it in the canopy. Just cut out the left side of the windscreen area. You have now less drag and a more realistic view..
Interesting! How did you manage the cables and power for the camera? We thought about putting the camera in the windshield, but that would mean you would have to take the entire system on and off whenever you changed batteries.
@InvertedAviatorsRC I used a balance plug to connect to the battery balance lead. Then just pulled power off 1 cell. Now the canopy is removable and powered by the flight battery.
The camera itself doesn’t have any time able adjustments, but the goggles that you use might have them. Feel free to check out our goggles video for more information on in-goggle adjustments!
Hello guys, I am a beginner in rc flying and just bought a umx conscendo with a second hand spektrum controller. I have 2 questions: 1: What type of fpv goggles would you recommend that arent too expensive. And what is the other thing I need to connect to goggles to the camera?
Well first off welcome to the hobby!!! We actually have a video that goes over all the different levels/types of goggles, as well as the parts that you need to get them working (ruclips.net/video/KAn8UINDpQg/видео.html). But in short: 1. The Teleporter v5's are pretty cheap and a good beginner set of goggles (www.fatshark.com/product-page/teleporter-v5) 2. Some goggles need an exterrnal receiver module, but those teleporters don't, so big win. You might also need some Omni-directional antennas (amzn.to/3QlDSQU) in order to get some nice range from the goggles. Feel free to reach out here or on our discord for any more questions!!!
If you want a higher quality camera, you'll have to start looking into a separate camera and vtx system. The beauty of the camera we use is that it's all wrapped up into one, and its super light. If you start going into higher quality cameras (like the RunCam Phoenix 2: amzn.to/3NNy4Ou) and higher quality VTX's (like the TBS Unify: amzn.to/487SSsh) you will for sure get better quality and longer range.
Nice video I have the same plane now, UMX Turbo Timber Evo, i just got it about 3 weeks ago now and i love it. I had bought a Sport Cub S2 i wanted to add FPV to, which i still prob will if dont sell it because i can get a cheap 20$ AIO Cam w/VTX setup thats tiny and is light, because that plane is 1S with the small UMX style PH1.25, not PH2.0, so that with the Brushed motor makes it a great plane to learn on yeah, but its not fast, its gets blown around in wind basically higher than 5mph and if flying it iin even 10mph wind you can get overpowered by the wind if you go up too high with it. So i wanted a small plane to go with my bigger planes, an Apprentice S 1.2M, Carbon Cub S 1.3M, & a Turbo Timber Evo 1.5M. Theyre fun but they require a bigger area to fly, even if they were FPV, but that would help with a Digital VTX like an Air Unit and a long range controller link like Crossfire or ELRS. The UMX Turbo Timber Evo is like the perfect smaller sized plane in my opinion. It has enough weight to it that it doesnt get blown around in lower winds, and it has a 3s or 2s brushless setup with a decent sized motor on it with good power on 3s, i hear run times are even better on the 2s though which stock weight would be plenty for this thing, it flies on 3s its amazing, and the batteries are so tiny and light, i think theyre 22g, and theyre the size of a 9v battery. It uses a JST lead and has a proper balance lead so its an easier choice than the 2s which needs the adaper, so ive only tried 450mah heavier 40g drone batteies that are also super small, but theyre alittle old so theyre only okay for a short peroid of time, i really just wanted to see how the power was and it felt the same really except for vertical pulls up you can do at 3/4 throttle on 3s and still fly up, the 2s needs full throttle to match that speed and seems to lose power alittle quicker but idk how much of that is the battery. Once i get used to this one im definetely going to be adding a nice but light analog setup onto it and i cant wait to fly it like that, this video just makes me want to try it even more lol. Can you post up a build video or just go over the techincal sides of the fpv setup and where you mounted everything and if that changed the wieght balance at all? Did you weight the parts before you put them in, im curious to see how much weight its carrying like this so easily.. Also what are your Take-off Flap settings? What about landing Flaps? Ive tried the take-off flaps once and the plane just shot up into the air after it took up and got speed, i could barely flip the Take-off flaps off in time it was going up so quick i thought it might just stall and fall. So now i dont use them anymore because really you dont need them and i have to get alittle better control of the plane before i play with the Flaps again right now. I also flipped it into AS3X mode from Safe mode at the same time as all this without realiziing so i guess its a good thing i practice in the Sim because Safe mode wasnt even activated to try and help or save me lol.. Anyway cool to see this plane with FPV i look forward to seeing more rc planes and fpv vids!
Yeah we lovet he Evo for its size and 3S power capabilities! For mounting the camera, we tried to put it right over the center of gravity so it minimizes the impact on flight performance. You can find the exact CG in the Evo manual on this site (www.horizonhobby.com/product/umx-turbo-timber-evolution-bnf-basic-with-as3x-and-safe/EFLU8950.html). We didn't weigh the camera before putting it on, but it is light enough where it shouldn't slow down the plane at all. For the flaps, we also followed what the manual says (on page 4), which is: Landing Flaps: 100% FLAP and 30% ELEVATOR Takeoff Flaps: 0% FLAP and 17% ELEVATOR That little elevator mix helps keep the plane from jumping up too quickly like what you're experiencing. We love flipping full flaps on and killing the motor because you can glide super slowly! Let us know if you have any more questions!
Yes that would for sure help waterproof it! But be careful, the conformal coating is corrosive on foam, so be careful when painting it on. I would also try to avoid getting it in the servos, because it might gunk it up.
I don't think so. I painted the camera and the lights on the wings, and if the conformal coating is wet, it eats up the foam. But it hasn't done any more damage since it dried. Also side note: if you have discord, we just made a discord server! (discord.gg/YzRuVCNX) We are more than happy to help on whichever platform is easier for you!
No, you have to purchase the goggles separately. A different person asked the very same question, and I responded in our "Hidden Ability of the UMX Turbo Timber Evo" video. The guy's name is "lebleup". But in short: 1. Fatshark Teleporter V5: Budget-friendly, smaller screen, built-in adjustments. 2. Fatshark Dominator V3: Larger 16:9 screen, recording capability, recommend RapidFire receiver module. 3. DJI Goggles V2: Pricey but top-notch picture quality, theater-like experience, extensive adjustments. Requires DJI-to-analog adapter and external receiver for analog cameras. There are links to everything in the reply in that other video! Let me know if there are other questions that you have!
Awesome! Yeah with these tiny cameras and vtx's, they require some airflow in order to keep them cool. If you're just working on the bench, you can try turning down the mW output to 25, and then once you go to actually fly you can crank it up to 200 mW
Thanks for the comment! So if you put the camera on the top of the plane (like what we did in the video), the camera will stick about half an inch too high for the box to close. You can either: 1. shave down the styrofoam on the inside to get the camera to fit (what we do) 2. Cut a hole in the top of the box and tape something like these little cups (amzn.to/48L6MRO) to use as protection for the antenna (we've done it and it works, but it makes stacking boxes more annoying) 3. Put the camera on the nose (right in front of the battery hatch's windshield), and that way it'll be much lower 4. Just take the camera off when storing it, because its easy enough to just re-tape it when it is time to fly
Hey, so if I want to connect straight to the board what adapter would I need? Also, if I want to put it on a bigger plane like your timber x did you connect that to the receiver or something? Or did you attach a battery to it? Thanks!
For connecting the camera to the board, we linked the adapter in the description with the name “Adapter:”. For the timber X, you can either do: - an external 1S battery (which is pretty easy) - solder the camera wires to a spare servo wire and connect it to an empty channel slot on your receiver. That way it will receive power from the receiver - in case you don’t have any extra channel slots on your receiver and you don’t want an external battery, you can splice an existing servo wire (that’s going to the aileron for example) and connect the red camera wire to the red servo wire, and likewise black to black. That way you can get power through that servo wire through the receiver. Let us know if you have any more questions!
Excellent information here. Set up identical based on your vids. Thanks! However, I am finding that the double sided tape (3M) cannot handle the heat from the temp of the cam even in low wattage setting. After a short time, the cam wants to fall forward from the weight of the lens. Hot glue? Small support? I'll figure it out. Nevertheless.... great content here. Love the idea and putting it to work.
Thank you for the kind words! If the tape you use is too thin, it can tilt the camera a bit for sure. With the tape that we use, we press the camera into the tape for 10-15 seconds in order to get the camera to set at the right angle. Hot glue and supports would work together, but if you are hot glue-ing directly to the plane it would be a lot harder to move the camera between planes.
Yep! Red goes to red, and then the black of the camera goes to the yellow of the adapter. You can also double check with a multimeter to make sure you don’t have conductivity between power and ground before plugging in a battery
Glad to hear the soldering went well! We like to put on heat shink tubing on any exposed wire connections in order to protect them. You can also twist the wires together in order to keep things tidy inside the plane, but other than that you should be good to go!
We primarily use the WolfWhoop WT03 (amzn.to/46tawp7)! Its super good for its weight, and it supports 50, 100, and 200 milliwatts of pure output power!
Hey guys, glad I found your channel. I am a drone instructor in a high school in fl. We not only fly drones but also rc planes. We are currently building several planes. We fly FPV drones and we like the idea of a camera on a plane. We tried a GoPro on our trainer high wing but it was too heavy . But how doe we connect or get a signal from the camera you showed to a set of goggles. We have several types of goggles but our fat shark FPV work best with the rotor riot drone we have. Can this camera send a signal to fat shark goggles? Thanks and we watch you videos during class sometimes and are planning on building a cargo plane similar to the on e you built. Thanks
Thank you for the kind words! Yes absolutely the Fatshark Goggles connect to the camera, and we have two pairs of them and they work really well! We think its awesome that you're showing our videos in class, and our goal is always to help spread the knoweldge in the FPV hobby! Stay tuned for our next video where we talk about what FPV goggles we use, and the whole process behind them!
I have a DJI FPV drone. Could I bind my goggles used for that to an fpv setup like this? I know they have the dji air units, but I would want to use a small camera setup like this. I just have no idea where to start.
The short answer is yes, depending on what kind of goggles you have. What kind of goggles do you have? Stay tuned for our next video where we go over how to connect different types of goggles to the camera that we love!
@@InvertedAviatorsRC I just have the DJI FPV goggles that come with part of the combo. I haven’t messed with fpv on my planes yet, but really want to. I have a few warbirds that would work well with fpv
Yeah FPV is perfect with warbirds, because their scale allows for the extra weight that comes with a camera and a battery. We have a P51-D mustang which looks super cool with FPV. You're going to need a DJI-to-Analog adapter with your DJI goggles (amzn.to/3FhwDmV) as well as a reciever module to get them to work. We are making a video currently explaining how to do this, so hang tight for more details!
You are correct that DJI is a digital system and the camera/fat shark goggles we use are analog, but with the DJI-to-analog adapter that we linked you can for sure use DJI goggles with analog!
We use the DJI Goggles v2 with a Digi Adapter. All you need to do is find any analog goggles, and set the receiver to match the channel that the vtx is sending out. If you want to learn more, we have a "How to FPV" video about goggles!
At 25mW, the camera will run for approximately 47 minutes. At 50mW: 40 minutes. And at 200mW: 34 minutes. If you are going for the external battery route, you could buy a pack of these batteries (amzn.to/3yTXciC) you just have to switch batteries every few minutes to be safe!
Yes absolutely! If you check out our "How to FPV" playlist on our channel, we have videos for cameras, goggles, transmitters, and more! Welcome to the FPV community and if you have any other questions feel free to reach out!
Great Video and super explanations. You Guys did a fantastic Job here.
Greetings from Germany Michael
Thank you so much and I'm glad you liked it! Let us know if you have any more questions!
It definitely plugs straight into umx timber reciever
Awesome great to hear it! Did you add a camera to your UMX Timber?
What about the camera video transmitter? What about the fpv googles? How do I know if a particular set of goggles is going to work with a particular camera setup? I was so happy to find this video and finally learn how to do this but by the end I was so let down that you left out so much. Might as well glue a rock to my plane because that is the same end result I would get with this video.
Worry not! We uploaded a video last week answering those very questions! Getting into fpv can seem daunting, but it’s totally worth it once you get the basics down. Let us know if you have any more questions!
@@InvertedAviatorsRC cool like Fonzie. I just came across your video surfing. I’ll have to look up your channel now.
Thanks! Happy surfing 🏄♂️
Great video... thank you! Any chance you also post videos that explain the rest of the process?
Thank you very much! Yes our next video is going through the whole goggle process, so stay tuned for the next installment of the FPV fun!
I have this setup on my UMX Timber. I like mounting it in the canopy. Just cut out the left side of the windscreen area. You have now less drag and a more realistic view..
Interesting! How did you manage the cables and power for the camera? We thought about putting the camera in the windshield, but that would mean you would have to take the entire system on and off whenever you changed batteries.
@InvertedAviatorsRC I used a balance plug to connect to the battery balance lead. Then just pulled power off 1 cell. Now the canopy is removable and powered by the flight battery.
@@windrider23 do you have that picture posted anywhere? maybe post a youtube short?? would love to see!
Oooh I definitely have to do this with Timbo Splice for fpv night flights 👊🏿
Oh you for sure should! FPV adds so much to the flying experience, and the cameras we linked work really well at night too!
Great video thanks guys
Thank you for the comment!
I have suggestion on another fantastic information video that you can do. How do you tune your camera on your plane to get such a quality video?
The camera itself doesn’t have any time able adjustments, but the goggles that you use might have them. Feel free to check out our goggles video for more information on in-goggle adjustments!
Great video thank you😊
Thank you for the kind words!
Iv been using the wolf whoop for 7 years and I love it. I also use a one s battery to power it and I can get 12 minutes of video
Awesome! Yeah we’ve been using it for quite a few years too and it’s just the perfect AIO FPV camera!
Hello guys, I am a beginner in rc flying and just bought a umx conscendo with a second hand spektrum controller. I have 2 questions: 1: What type of fpv goggles would you recommend that arent too expensive. And what is the other thing I need to connect to goggles to the camera?
Well first off welcome to the hobby!!! We actually have a video that goes over all the different levels/types of goggles, as well as the parts that you need to get them working (ruclips.net/video/KAn8UINDpQg/видео.html). But in short:
1. The Teleporter v5's are pretty cheap and a good beginner set of goggles (www.fatshark.com/product-page/teleporter-v5)
2. Some goggles need an exterrnal receiver module, but those teleporters don't, so big win. You might also need some Omni-directional antennas (amzn.to/3QlDSQU) in order to get some nice range from the goggles.
Feel free to reach out here or on our discord for any more questions!!!
Hey do you know of a more high quality fpv camera to stick on a timber? That one is a good first one!
If you want a higher quality camera, you'll have to start looking into a separate camera and vtx system. The beauty of the camera we use is that it's all wrapped up into one, and its super light. If you start going into higher quality cameras (like the RunCam Phoenix 2: amzn.to/3NNy4Ou) and higher quality VTX's (like the TBS Unify: amzn.to/487SSsh) you will for sure get better quality and longer range.
Nice video I have the same plane now, UMX Turbo Timber Evo, i just got it about 3 weeks ago now and i love it. I had bought a Sport Cub S2 i wanted to add FPV to, which i still prob will if dont sell it because i can get a cheap 20$ AIO Cam w/VTX setup thats tiny and is light, because that plane is 1S with the small UMX style PH1.25, not PH2.0, so that with the Brushed motor makes it a great plane to learn on yeah, but its not fast, its gets blown around in wind basically higher than 5mph and if flying it iin even 10mph wind you can get overpowered by the wind if you go up too high with it.
So i wanted a small plane to go with my bigger planes, an Apprentice S 1.2M, Carbon Cub S 1.3M, & a Turbo Timber Evo 1.5M. Theyre fun but they require a bigger area to fly, even if they were FPV, but that would help with a Digital VTX like an Air Unit and a long range controller link like Crossfire or ELRS.
The UMX Turbo Timber Evo is like the perfect smaller sized plane in my opinion. It has enough weight to it that it doesnt get blown around in lower winds, and it has a 3s or 2s brushless setup with a decent sized motor on it with good power on 3s, i hear run times are even better on the 2s though which stock weight would be plenty for this thing, it flies on 3s its amazing, and the batteries are so tiny and light, i think theyre 22g, and theyre the size of a 9v battery. It uses a JST lead and has a proper balance lead so its an easier choice than the 2s which needs the adaper, so ive only tried 450mah heavier 40g drone batteies that are also super small, but theyre alittle old so theyre only okay for a short peroid of time, i really just wanted to see how the power was and it felt the same really except for vertical pulls up you can do at 3/4 throttle on 3s and still fly up, the 2s needs full throttle to match that speed and seems to lose power alittle quicker but idk how much of that is the battery.
Once i get used to this one im definetely going to be adding a nice but light analog setup onto it and i cant wait to fly it like that, this video just makes me want to try it even more lol.
Can you post up a build video or just go over the techincal sides of the fpv setup and where you mounted everything and if that changed the wieght balance at all? Did you weight the parts before you put them in, im curious to see how much weight its carrying like this so easily..
Also what are your Take-off Flap settings? What about landing Flaps? Ive tried the take-off flaps once and the plane just shot up into the air after it took up and got speed, i could barely flip the Take-off flaps off in time it was going up so quick i thought it might just stall and fall. So now i dont use them anymore because really you dont need them and i have to get alittle better control of the plane before i play with the Flaps again right now. I also flipped it into AS3X mode from Safe mode at the same time as all this without realiziing so i guess its a good thing i practice in the Sim because Safe mode wasnt even activated to try and help or save me lol..
Anyway cool to see this plane with FPV i look forward to seeing more rc planes and fpv vids!
Yeah we lovet he Evo for its size and 3S power capabilities! For mounting the camera, we tried to put it right over the center of gravity so it minimizes the impact on flight performance. You can find the exact CG in the Evo manual on this site (www.horizonhobby.com/product/umx-turbo-timber-evolution-bnf-basic-with-as3x-and-safe/EFLU8950.html). We didn't weigh the camera before putting it on, but it is light enough where it shouldn't slow down the plane at all.
For the flaps, we also followed what the manual says (on page 4), which is:
Landing Flaps: 100% FLAP and 30% ELEVATOR
Takeoff Flaps: 0% FLAP and 17% ELEVATOR
That little elevator mix helps keep the plane from jumping up too quickly like what you're experiencing. We love flipping full flaps on and killing the motor because you can glide super slowly! Let us know if you have any more questions!
Do you think I could add a layer of the coating onto the planes electronics if I were to fly it one water?
Yes that would for sure help waterproof it! But be careful, the conformal coating is corrosive on foam, so be careful when painting it on. I would also try to avoid getting it in the servos, because it might gunk it up.
If the solution was dry would it still erode the foam?
I don't think so. I painted the camera and the lights on the wings, and if the conformal coating is wet, it eats up the foam. But it hasn't done any more damage since it dried.
Also side note: if you have discord, we just made a discord server! (discord.gg/YzRuVCNX) We are more than happy to help on whichever platform is easier for you!
Does the kit come with a pair of fav goggles? If not what would you recommend?
No, you have to purchase the goggles separately. A different person asked the very same question, and I responded in our "Hidden Ability of the UMX Turbo Timber Evo" video. The guy's name is "lebleup". But in short:
1. Fatshark Teleporter V5: Budget-friendly, smaller screen, built-in adjustments.
2. Fatshark Dominator V3: Larger 16:9 screen, recording capability, recommend RapidFire receiver module.
3. DJI Goggles V2: Pricey but top-notch picture quality, theater-like experience, extensive adjustments. Requires DJI-to-analog adapter and external receiver for analog cameras.
There are links to everything in the reply in that other video! Let me know if there are other questions that you have!
Hey guys. I just bought everything you use :) and received the last part today, the wt03. Is it normal that it gets superhot within a minute?
Awesome! Yeah with these tiny cameras and vtx's, they require some airflow in order to keep them cool. If you're just working on the bench, you can try turning down the mW output to 25, and then once you go to actually fly you can crank it up to 200 mW
@InvertedAviatorsRC thank you very much!
I will do that, is 200mw what you guys are flying on?
Yes it is! It gives really good range for such a small system
Great video only have 2 questions. How do you store your airplane in the Box with the camera on it? Will it fit back in the box with the camera on it?
Thanks for the comment! So if you put the camera on the top of the plane (like what we did in the video), the camera will stick about half an inch too high for the box to close. You can either:
1. shave down the styrofoam on the inside to get the camera to fit (what we do)
2. Cut a hole in the top of the box and tape something like these little cups (amzn.to/48L6MRO) to use as protection for the antenna (we've done it and it works, but it makes stacking boxes more annoying)
3. Put the camera on the nose (right in front of the battery hatch's windshield), and that way it'll be much lower
4. Just take the camera off when storing it, because its easy enough to just re-tape it when it is time to fly
Hey, so if I want to connect straight to the board what adapter would I need? Also, if I want to put it on a bigger plane like your timber x did you connect that to the receiver or something? Or did you attach a battery to it? Thanks!
For connecting the camera to the board, we linked the adapter in the description with the name “Adapter:”.
For the timber X, you can either do:
- an external 1S battery (which is pretty easy)
- solder the camera wires to a spare servo wire and connect it to an empty channel slot on your receiver. That way it will receive power from the receiver
- in case you don’t have any extra channel slots on your receiver and you don’t want an external battery, you can splice an existing servo wire (that’s going to the aileron for example) and connect the red camera wire to the red servo wire, and likewise black to black. That way you can get power through that servo wire through the receiver.
Let us know if you have any more questions!
would this camera be fine for a sport cub s2?
Yes absolutely! We put one of these cameras on a UMX Cessna and it still flew really well!
Excellent information here. Set up identical based on your vids. Thanks! However, I am finding that the double sided tape (3M) cannot handle the heat from the temp of the cam even in low wattage setting. After a short time, the cam wants to fall forward from the weight of the lens. Hot glue? Small support? I'll figure it out. Nevertheless.... great content here. Love the idea and putting it to work.
Thank you for the kind words! If the tape you use is too thin, it can tilt the camera a bit for sure. With the tape that we use, we press the camera into the tape for 10-15 seconds in order to get the camera to set at the right angle. Hot glue and supports would work together, but if you are hot glue-ing directly to the plane it would be a lot harder to move the camera between planes.
You happen to have the color code for wiring the adapter. Is it red to red, yellow to black??
Yep! Red goes to red, and then the black of the camera goes to the yellow of the adapter. You can also double check with a multimeter to make sure you don’t have conductivity between power and ground before plugging in a battery
One last question soldering went well. What's best to put on the wires, tape, small shrink tubing??
Glad to hear the soldering went well! We like to put on heat shink tubing on any exposed wire connections in order to protect them. You can also twist the wires together in order to keep things tidy inside the plane, but other than that you should be good to go!
What camera are you using?
We primarily use the WolfWhoop WT03 (amzn.to/46tawp7)! Its super good for its weight, and it supports 50, 100, and 200 milliwatts of pure output power!
Hey guys, glad I found your channel. I am a drone instructor in a high school in fl. We not only fly drones but also rc planes. We are currently building several planes. We fly FPV drones and we like the idea of a camera on a plane. We tried a GoPro on our trainer high wing but it was too heavy . But how doe we connect or get a signal from the camera you showed to a set of goggles. We have several types of goggles but our fat shark FPV work best with the rotor riot drone we have. Can this camera send a signal to fat shark goggles? Thanks and we watch you videos during class sometimes and are planning on building a cargo plane similar to the on e you built. Thanks
Thank you for the kind words! Yes absolutely the Fatshark Goggles connect to the camera, and we have two pairs of them and they work really well! We think its awesome that you're showing our videos in class, and our goal is always to help spread the knoweldge in the FPV hobby! Stay tuned for our next video where we talk about what FPV goggles we use, and the whole process behind them!
I have a DJI FPV drone. Could I bind my goggles used for that to an fpv setup like this? I know they have the dji air units, but I would want to use a small camera setup like this. I just have no idea where to start.
The short answer is yes, depending on what kind of goggles you have. What kind of goggles do you have? Stay tuned for our next video where we go over how to connect different types of goggles to the camera that we love!
@@InvertedAviatorsRC I just have the DJI FPV goggles that come with part of the combo. I haven’t messed with fpv on my planes yet, but really want to. I have a few warbirds that would work well with fpv
Yeah FPV is perfect with warbirds, because their scale allows for the extra weight that comes with a camera and a battery. We have a P51-D mustang which looks super cool with FPV. You're going to need a DJI-to-Analog adapter with your DJI goggles (amzn.to/3FhwDmV) as well as a reciever module to get them to work. We are making a video currently explaining how to do this, so hang tight for more details!
No, it is a different system.
You are correct that DJI is a digital system and the camera/fat shark goggles we use are analog, but with the DJI-to-analog adapter that we linked you can for sure use DJI goggles with analog!
Which goggles and how to connect?
We use the DJI Goggles v2 with a Digi Adapter. All you need to do is find any analog goggles, and set the receiver to match the channel that the vtx is sending out. If you want to learn more, we have a "How to FPV" video about goggles!
@@InvertedAviatorsRC I'll go find and watch that thanks. I just got the DJI Goggles 3. Any way to use those?
Can you please tell me what size jst-ph plug size is it a 1.25 or 2.0 3 pin
Which connection are you looking for? The battery power lead or the wire that connects to the board?
@@InvertedAviatorsRC the wire to connect to the board thay come in 2 sizes
From the board to the camera
I believe it is a 2.0, but the adapter that we linked (amzn.to/3PlPjXp) is the correct connector
@@InvertedAviatorsRC thanks for the info
Wow really nicely done video. Maybe I should buy some of those cameras and put them on my planes. It seems simple and easy!
Yeah it’s a really fun addition that’s super simple to accomplish!
If anyone is in Austin flying this setup, howdy at me!
PS what kind of flight time (view time) on the 1S external battery?
At 25mW, the camera will run for approximately 47 minutes. At 50mW: 40 minutes. And at 200mW: 34 minutes. If you are going for the external battery route, you could buy a pack of these batteries (amzn.to/3yTXciC) you just have to switch batteries every few minutes to be safe!
What about goggles? Just for a first timer
Yes absolutely! If you check out our "How to FPV" playlist on our channel, we have videos for cameras, goggles, transmitters, and more! Welcome to the FPV community and if you have any other questions feel free to reach out!