Cheap 3D Printed CoreXY 3D Printer called Rook EP 2 - Update, Mods and Thanks!
HTML-код
- Опубликовано: 27 авг 2024
- Here is my small CoreXY 3D Printer I call Rook. This is mostly 3d printed!
My Discord
/ discord
Github
github.com/rol...
Support me on Patreon
/ rolohaun
My Instagram
/ rolohaun
Lets take a moment to appreciate that the Bamboo is relegated to the floor but this awesome bit of engineering is pride of place, a tinkerer after my own heart👍
Haha ya the x1 is just a tool the Rook is special!
"The x1 is just a tool the Rook is special!"
@@Rolohaun Wow, engineer AND poet??? What else are you hiding? Lmao.
LOL but i will still print this on my 3 bambu's roflmao
This printer is exactly what I was searching for: a project to recycle my old rods, motors, etc…
Thank you!
I'm mad at youtube for recommending me this, I don't need another printer, but I have ALL the parts for this and I WANT IT.
Came for the Rook and subscribed for the good content
Really like the end where you showcase usermods for your printers. You should do Mod Showcases for all of your printers!*
*after I release a bunch of mods, of course😉
You have the bambulabs sitting on the floor collecting dust and are instead using a tiny printable printer.
Really excited to see how this design evolves.
the X1 is on the floor cause that is my only stable surface haha I use the X1 everyday
I like the chess naming convention. Next design should be a printable cantilevered printer with an absolutely minimal BOM called Pawn
that would be awesome
On it as we speak.
That's genius lol
I love it 👍
That'd be fun if using voice search...
Maybe it would be helpful to publish the whole project on "Thingverse" and "Printables". That way you can reach more people.
What is the maximum acceleration and print/motion speed the printer can achieve?
that is a good idea I will probably make a pintables page for this
I like to Design & build printers for fun. Will definitely enjoy this build thanks for your hard work!
When I first started 3d printing I built a Mini Kossel and to this day after building Vorons and running some of the best production machines that Kossel printed just as well back in 2014. One of the things I loved was endstop offset from Z limit switch and when I ran into designs with the Z switch on the hotend side with a Screw to adjust or like Ender 3 where the whole switch has to move, I just couldn't understand it. Glad someone mentioned how that makes no sense.
thanks! a old ultimaker 2 taught be this
@@Rolohaun Thats the exact other machine I had in mind. I can see from a mechanical perspective how it kind of made sense but it's much easier to sneak up on nozzle with Z offsets then adjusting a screw.
What a cool project. I think i'll build one when I get that new Elegoo Neptune 3 Max
I have been interested in 3D printers for years, used them quite a bit but never owned one myself. Really like this design, makes my tinkering fingers crawl in excitement honestly 😄 would love to build one but I don't have anywhere to keep it sadly
I might build the parts in my cheap old clone 3d printer and then use the parts from the same printer in the core xy printer just cause why not
Fantastic stuff, many thanks for all this effort! Just from an aesthetic perspective, it would be nice if both the bottom frame and the motormounts would have the same rounded corners as the build plate frame, would make it more coherent.
yes I am working on polishing the file now!
For once, God bless the YT algorithm.
nice job my guy i bet this took so much work
That's frickin awesome!
Looks like an awesome build.
Damn! I got 3 Project running, seeing this I want to build it NOW!
Less is more! Love it!
Could you do a video about heated vs non heated bed? I kind of like the idea and simplicity of a non heated bed but concerned about practicality and reliability without it
Sure that would be a cool idea
@@Rolohaun thanks! Looking forward to building a rook
Really cool printer.
The duel z-axis in the middle is what I feel is nice instead of two leadscrews completely at the back, no warping or sagging. I might be wrong
Очень классный маленький CoreXY
благодарю вас
Try the CHT high flow nozzle they flow about 50% more than standard
This is so clever bro lol I wanna build one
you need to! I am sure you have spare parts haha
I wonder how fast this can print with klipper? You can run klipper on a ~$30ish thin client.
it is running Klipper, I run Klipper on a old laptop :)
Thank you so much for posting the BOM. I've been looking for a source for a replacement ball screw for my Wanhao D6 and I found one quickly at the source you used, aliexpress for an amazing price. I find the Z axis accuracy to be very important for creating prints with smooth sides. My D6 printer has a cyclical error of 0.03 mm that I measured using a micrometer. That is a 15% error in an 0.2 mm layer thickness and it creates a very poor print. It would be interesting to measure the Z axis error for the screws used in this printer. I'm hoping to get good result with the aliexpress part, but I expect I will have to spend a few hundred dollars to get a good part from Misumi.
Kingroon sells a cr10 like hotend that had a v6 mount and I believe that it is all metal. They sell it in a one pack or a two pack. Around $7-10.
oh wow thats a good deal!
Awsome build once again! I want to build this so much! Do you think it’s doable with a 180mm bed? I’d like to put my kp3s in the trash and use the rest of the parts
only a 150 bed will fit and it still is only 120x120 usable, there is some idea's floating around on discord to make a larger version
Would scaling up bijou be possible?
@@twanheijkoop6753 yes, I am going to make a larger mk2 bijou that is corexy
@@Rolohaun nice, I'll be trying to convert me ender 3 S1 with it. At least reusing what is possible.
Imagine slapping 48mm nema 17 that I use on my speed printer on this.
Hi, those linear rails look nice, are they expensive ones ?
I just order the cheapest I can fine from amazon
@@Rolohaun Wow they look like Genuine ones !
Is it possible to enclose it? I'm looking for something cheaper and less intimidating project than voron and thus little fella looks just like one
the version his hard to enclose as parts stick outside the frame. maybe another version will be easier
are you running a chc? I would suggest a chc pro just for more flow, the price difference is tiny.
I am running the CHC TD6S full hotend, I do want to try a pro
Would you mind going through the bom times that have few variants to chose and give some advice what to chose based on price/speed/quality etc? It doesn't have to be in video format, some short summary would be enough.
I have added a bit more detail to the BOM for the the hotend and mainboard
@@Rolohaun Thanks. I'm already on your discord and i spam my noob questions there.
I already ordered SKR Pico for this.
Do I see an AMS on the side? ;)
Yep
Been looking around but maybe I'm missing something. Do you use an aluminum build plate and put glass onto it or what?
sorry, I just used glass with bed springs on 3d printed pads and VHB tape. I will update the github and BOM. The Rook does not use a heated bed as default
@@Rolohaun thanks for answering. Simple enough.
I can't tell but is the bed heated? If not, would printing it out of ASA eliminate issues from warping from the heat?
yes ASA or ABS would be good for that. The bed is not heated in this prototype
@@Rolohaun Thank you for the response! This printer reminds me of a mini-voron 1.8! Def gonna get it printed once my Voron Trident is working!
I have a Cr10 and have been looking into getting a core XY printer but why spend the money when I can build it myself! I'll absolutely join the Discord and potentially start building my own. I'd like to build one with the same build plate size as my cr-10 (if not slightly larger) .
Hey, what are your E-Steps for your cloned BMG extruder? I have the exact same one and can't for the life of me get it to print nice. A ballpark estep would be appreciated. Also, nice little printer, quite the build. Subbed. Also, use SuperLube teflon jelly for your Z rods. The stuff is pure magic, as it even reduces binding and increased smoothness of layer.
rotation_distance: 22.43
gear_ratio: 50:17
@@Rolohaun You are Awesome.
@@Rolohaun What do you mean by rotation distance? Asking for a friend.
@@Splatterpunk_OldNewYork klipper uses rotation distance
@@Rolohaun Oh ok. Gotta translate that to Marlin I guess.
Niiiiice ✌️🤙‼️🤙‼️🤙‼️
Hi! sorry if this might be interrupting, and I know this is unrelated to the video, but I need to know if I could build a reprap out of my Ender 2 Pro. I bought it a couple months ago but I regret is it because it has a very small community and it isn't open source. So I want to turn it into a different (open source) printer that keeps the small profile and re-uses most of the same parts other than 3D printed parts (I have another printer) and maybe some threaded rods or something. If you could point me to something or even design a printer using those parts (or point me to a tutorial so that I could make my own design) it would be astronomically appreciated!
there is a good ender 2 facebook group, your should be able to get some info there
@@Rolohaun Thanks! 👍
Curious to know the entry price for something like this.
about 260 USD if you but everything new. you will still need some way to run Klipper also
Possible to use direct extrusion?
there is talk about adding a direct drive, I am sure there will be mods for it
I didn't catch it in the video but what does a little setup like this cost?
if you by everything new it's about 260 USD
Question: can it replicate itself?
unfortunately no as the frame parts are one piece it can print most of it's own parts just not the frame
This thing is bad as$. I'll build one after I finish my Zero G build I started yesterday
is that sparta3d filament? :)
This is Polymaker PLA PRO, but I do love Sparta3D filament! I want to order a bunch soon
@@Rolohaun i run sparta3d.. let me know when you order, i am a fan
Hey, I'd like to join the community but I'm unable to accept the invite :( Could you help me out
the link is set to not expire what issue are you having?
@@Rolohaun Was getting the unable to join error. Prob something on my end. Now it worked ^^ Thanks!