How to Spot Paint Your Car at Home Using a Small Compressor & LVLP Paint Gun | DIY Auto Repair
HTML-код
- Опубликовано: 18 июн 2024
- In this episode, I share how to spot paint a quarter panel and a bumper cover with a 26-gallon Harbor freight compressor and a low volume low-pressure paint gun. I believe this is the best combination for a DIYER or hobbiest to repair or paint their vehicle. I'll walk you through the step-by-step process of applying a Tri stage pearl white finish to this quarter panel and give you all the tips and tricks to applying a beautiful looking paint job.
Pick up high quality Garage Noise merchandise
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
garagenoisegear.com/?_ab=0&_f...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Inokraft lvlp paint gun
amzn.to/48AZ4sP
finish 1 fc710 spot panel clear
with slow activator
amzn.to/3roFfog
upol 2k primer/ sealer
amzn.to/3VCZmvE
speed coat color blender
amzn.to/4cuWW8p
6inch interface pad
amzn.to/3VwB1Yx
lichamp 1.4 inch masking tape
amzn.to/43yHFPR
lichamp 18mm masking tape
amzn.to/3TNXejz
plastic masking
amzn.to/3x0tuqD
bulldog plastic prep paste
amzn.to/3O6lIll
Bulldog adhesion promoter
amzn.to/3roEU4E
mirka grey scuff pad ultrafine (1500)
amzn.to/44ywUMQ
Sagola disposable paint cups dpc
amzn.to/3TKKB8R
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise. 
Авто/Мото
Thank you so much for taking the time to make all these videos, learning alot from you! There really isn't any other channel with this amount of detail and production. Keep up the amazing work!
Appreciate the support! It's not easy ,without the support of people like you I may have stopped a while ago.
Tri coat whites are the most forgiving.
Iv ran the pearl coat edge to edge many times on the newer Hyundais and always get a dead solid match.
Good video man 🎉
Thanks brother! Yeah, never had much trouble with pearl white as long as the base is right.
Tulsa that's awesome. I was just over there yesterday. Delivered in Cleveland, Sand Hill, & Glenpool. Then I picked up in Jenks before heading off to Indianola MS
I pull out of Henryetta and Muskogee from time to time to.
👍
Thanks again Chris . I've been doing paint work for 30 years. Never miss one of Your videos. 😁
That's awesome! Thank you , appreciate the support
Thank you for explaining the attention to detail.!! 🔥💯👏👏👏👏👏
No problem!! Thanks for the comment and support!
Great job. I agree this is a great setup for diyer. I bought one of these guns to just try. I I have Iwata 400 for main gun but this is a good gun for the price. Great video🙂
Nice job looking good 👍
Thanks 👍
I have been following you for a while and have bought pretty much all the equipment that you suggested and it helped a lot. My question is for FC710 & FC720 dieback. The paint lays down like glass but couple of hours later the gloss is not there anymore.
Die back is typically from waiting too long in-between coats of clear. It's funny I got some today because it's so hot 99° the first coat of clear cures so quickly. In hot temps you may only need to wait a minute before you apply the second coat.
I will try that and update usually I am waiting minimum 10 minutes before the 2nd coat.
I never understood spot panel clearcoats, i cleared a whole jeep with that same product... thats what SW gave me back then about 4 yrs ago and i based it with their dimensions, sprayed with hvlp and a 6 gal pancake compressor... the color sanding the orange peel was brutal
It just dries a bit quicker. This buff a bit better when your on a deadline the fc720 overall clear flows a bit better, it just takes more time to gas out before it's ready to buff.
@GarageNoise thx for the reply and clearing that up🤣... think im gonna get that upol clear also, i have my sons truck and mine that needs rockers so gonna paint them complete... been watching your channel keep up the good work, most informative content out there imo
Great tutorial! Learning how to spot paint at home with a small compressor and LVLP paint gun is super handy. We sent you an email, take a look.
Maaco have this man train your technicians …TRAINING SEMINAR
👍
Am I understanding that you sanded the original clear coat over the top through the A-pillar? I made so many mistakes on my old RAV4 that I might just be able to fix ‘em after watching this video. Thanks, Chris!
Yes with 600, appreciate the support!
Hi Chris, a superb finish from what is a budget gun which is as you say a good gun and compressor for the home user. I think all these guns that are coming out lately that spray fairly well are all based on the R500 setup which is not a bad thing🙏👍John UK
Hey Chris, another great teaching video from you. I was wondering if you have a filtration system or exhaust system in your shop since I notice you paint in the open. I’m a new painter and Im contemplating it for my shop
Hi Chris, That looks awesome! One can see the pearl in certain lighting. One note. The link to the 3m face mask does not work.
Tank’s teacher Chris
👍
How do you like this clear over the Upol?
Hi Chris can you please advise me on inferred heater ?
This is the one I picked up. It made by Vevor I have some of their other tools and they seem pretty good. I can't speak of its durability I pick it up last fall, but it's reasonable priced. Hope this helps appreciate the support!
amzn.to/4bmklr0
Do you do a drop coat on the repair or the entire panel 🤔
I hate it when everything is going good until the end. lol Good job. Looks like you have plenty paint left from the pint. What do you do with all the extra paint?
Hey Chris…first off love your videos, so helpful. I have a question though. When you spray I know you try to maintain a factory orange peel. How do you remove dirt nibs without that spot looking like you sanded and buffed it? Can you maybe add this to one of you videos?
Yes I can, if your peel is minimal you can do it fairly easy. If you have excessive peel the you need to color sand and buff the panel. I can do a demo tho
@@GarageNoise that would be awesome. Thank you
Hey Chris; Quick question : Do you use a flex agent in your paint/clear when painting a bumper pad, or do folks just not do that any more ? BTW, I'm knee deep in restoring my old (one owner, bought it new) 1989 Olds Toronado. It's completely stripped back to metal, and waiting for low humidity day to shoot epoxy primer on it. All the plastic parrts will be prepped and painted afterwards.
Chris do you have a video using this gun with silver or gold metallic? thanks much, Phillip Hall
Haven't sprayed silver with it yet, but I'm sure I will.
@@GarageNoise
Thanks!
I was thinking about getting that compressor but they also sell one that's smaller with the same 4.5 SCFM on it. It's only 10 gallons. I would assume that would also work with the LVLP sprayer without fluctuations as well then right?
If it were me I would opt for the larger one.
Hey Chris the shirts you sent me. My mailbox got broken into they stole my mail. And the shirts out of the parcel locker. Was looking forward to trying on the shirts. I'll try to buy two more nexted month. Hopefully by then my mailbox will be repaired.
What's your name?
Tony Mcfarlan
how do fix a run like that? let it dry and sand it and start over? or.. do you have a better solution to it?
I sanded it out and It was perfect but that doesn't always happen . Next time I'll make a video on how to fix it. I do have some on the channel.
@@GarageNoise oh you do? cool, I'll look for them. This is a great channel.
Can I put a clear coat on the entire car with that compressor or should I go bigger?
I think you can , I've seen it done . Depending on what gun you want to use. If you can budget a bigger compressor I would do that.