COMPLETE PAINT JOB with the SPRAYIT R500 LVLP spray gun and a small compressor
HTML-код
- Опубликовано: 5 май 2021
- In today’s video I do a complete paint job using the SprayIT R500 low volume low pressure gravity feed spray gun and my small 21 gallon compressor on a 2012 Chevy Tahoe and show you that it is very possible to paint your vehicle using a LVLP spray gun and a small compressor at home in your garage.
SprayIT SP-33000 LVLP spray gun kit: amzn.to/3N0DofT
R500 lvlp spray gun: amzn.to/3MMNLnN 
Авто/Мото
Thanks for showing me that I don't need to invest $800.00 in a compressor to spray a car. I now have the confidence to paint my Civic!
You’re welcome and I appreciate you for checking out the video!
shit old civic can paint brush and have better than new civic. no matter how paint have only big shit civic.
@@UndergroundPaintKing
Hey brother where did you get that color mixed up at and how much??
@@ibanezsrbass1759 I got it mixed at my local paint supplier but I don’t remember how much I paid for it
@@UndergroundPaintKing
Ok thank you bro!
The algorithm sent me this gem of a channel. No bullshit, straight to the point, not some sponsored infomercial shill
I’m definitely not sponsored I just do this for the people really trying to gain some skills…I really appreciate you checking out the channel and liking the content!
Dude had me with the intro; lol.
Knock that boy on out, didn't you King 👑 👍🏾🔥🔥👍🏾
Yessir! I appreciate you checking out the video Sprayway!
Played it down with ease, I'm ready to gone use mine now lol got me hyped
And sprayway in tuned in. Yea lemme catch up on some of these vlogs.
@@412AutoCare i said the same shit
Tko
That's what I'm talking about most of us that watch these videos don't have expensive equipment we do it for the love of it
And that my friend is why I make these videos for the people that love to do it and don’t have the shop setting that makes things easier…I want to show people that it still can be done and done nicely!…I appreciate you taking time to check out the video!
I gotta say, UPK is inspirational. I do small stuff, mostly guitars and bicycles and I’m trying to move on from rattle cans, but get scared away when I hear about needing to get 5 HP, 3 phase, 60 gallon compressor. Seeing UPK paint up a monster Chevy Tahoe with a 21 gallon compressor and a LVLP gun is mighty impressive.
I appreciate you Sean and you definitely can do it and not need all the big equipment to pull it off…I hope the channel is helpful to you!
That is an awesome and outstanding job that you did. I also enjoyed the instructorship. Salute my dawg 💪🏾💯
Thanks I appreciate you checking out the video 💯
I bought the Fortress 27gal 200PSI air compressor today from Harbor Freight. They even gave me a free air impact gun. $120 gun. SMH. They're stepping up. I think I'm set now. I think the A610 will run fine. Been watching your videos. Thanks for always hitting me up in the comments. You're bringing back the love I had for painting in my Air Force days. I'm gonna work on building myself a nice spray booth next. Thinking about flipping utility trailers to grab some extra cash. Work my way up. You do good work, bro.
I appreciate you SGT Rickards and you got a nice package deal 💯 let me know your thoughts on the A610 and I hope the channel continues to be helpful to you in anyway possible ❗️Welcome Back💪🏾
I’ve been waiting for this video! Thank you sir.
You’re welcome and I appreciate you checking it out!
This was a very outstanding video , great results on the Tahoe , sub earned
Thanks FNG83 I appreciate you checking out the video and subscribing to the channel!
Nice job as usual UPK - have a good weekend.
Thanks Jerry I appreciate you as always and enjoy your weekend as well!
Fantastic video man! I've always wondered about this but didn't know enough. Thank you for proving that it can be done!!
You’re welcome and now at least you know it can be done so I hope this helps or motivates you to do your own project!…I appreciate you checking out the video!
Excellent job UPK, You have to be happy with the way that job turned out. As always keep up the good work and looking forward to the next video. Thanks again
I am definitely happy with this job and I appreciate you checking out the video and supporting the channel!
Great demonstration and results! Thanks again for the review on the Spectrum Paint System. Picked up a "starter" set and both adapters and am pleased with both value and quality level. Keep up the great work!!!
I’m glad the videos are of some help and are pleased with the paint system and adapters…I appreciate you checking out the videos
Man that looks so good. And yes I love my SprayItt 33000 on my 33gal Craftsman 💪🏽💯
Great to hear success stories on the SprayIT spray gun…I appreciate you and thanks for checking out the video!
Awesome seriously awesome. This should give some DIY people hope! Thanks so much for doing this and putting it up!
Thank you and it was my pleasure to give my DIY people hope! You can definitely do it!
Just the video I needed to see. Appreciate it homie! ✊🏿
You’re welcome and I appreciate you checking out the video!
I love the ingenuity that went behind making this work with a small compressor. The results are outstanding!
Thank you and I appreciate you checking out the video and hope it helps if you intend on doing this for a project of yours!
That grey looks awesome on her! Beautiful job, and excellent job at showing that we don't need high end equipment for DIY projects!
Thanks I appreciate you checking out the video and you’re right that you can get those projects done and don’t have to have big shop equipment to do it
Came out like a champ! The tricks worked! Good job.
Thanks bro I appreciate you checking out the video!
Just the kind of real world review I was looking for, that Tahoe looks amazing!
Thanks John I appreciate you checking out the video!
I do spray wraps and people have been telling me for YEARS, you cant do a car with LVLP. Im up in NYC, we dont have room for large compressors. I am glad someone did a video showing it can be done. Shout out to the king
Appreciate you Kraiden and I’m glad the channel was helpful! You definitely can do your vehicles with a small compressor setup 💯
Have you done wraps with lvlp? I’m curious if it can be done. Specifically Raail spherical or auto flex?
UPK in the building........Damn son you put that myth to bed. Awesome job it came out really nice. Thanks for showing us it can be done.
Yessir! #MythBuster…I appreciate you checking out the video!
That looks amazing!!!!!
Thanks Albert I appreciate you checking it out!
Thanks for doing a full car with this set up. It looks great!
You’re welcome and I appreciate you checking out the video!
Hands down the best videos I’ve seen in a hot minute
Thanks I appreciate that and appreciate you checking out the videos!
I love the spirit of entrepreneurship exhibited on your channel, straight-forward information with no chaser. I love detailing but appreciate the painting process as well. All the success in the universe is what I desire for your and your audience here on youtube!!!!
Thanks I greatly appreciate that and appreciate you…All the success to you as well my friend!!!
Came out great UPK!! Wow it came out sweet and love the color!
Thanks bro and I think it came out nice as well better than I thought it would actually
Bro. Thanks for this video!! Thanks for providing that.
You’re welcome Miguel!
Thank you for putting this out, i couldnt find anything anywhere that told me i didnt have to invest thousands into tools for what is likely a 1 time project. Great content man.
Thanks I appreciate you checking out the video and I hope the video is helpful!
And that is how you do that, excilent job UPK
Thanks Pharraway I appreciate you checking out the video bro!
Big props!! Unbelievable finish looks amazing
Thanks bro I appreciate that and appreciate you checking it out!
Brother this is utterly amazing what you did!!!!
Thanks bro I really appreciate that…thanks for checking out the video!
Looks good I like the red emblems
Yeah the little touches with the emblems and letters helped bring the paint job together…I appreciate you checking out the video!
Bruh!! You're my new hero. As soon as my buddy puts the exhaust on my racecar I'll be using the same setup. I will be telling everyone about your channel. Thanks again bruh.
Appreciate you bro and you’re welcome…I do this for my people!!!
Thanks guy for another great video👏🏼👏🏼👏🏼
Thanks I appreciate you and appreciate you checking out the video 💯
Enough talk, UPK you sold me with this great video! A lot of us appreciate your, info, hard work and dedication to this craft...
Thanks Ziggy that means a lot to me and I appreciate you checking out the videos!
So good, and thanks for taking on a real challenge for that setup with that big truck. I've got a similar size compressor with plans to paint a '91 Land Cruiser. Was looking at 4-stage HVLP turbines but with careful planning this is totally doable at about 1/10 the cost! Thank you!
You’re welcome and you can definitely do it without having to spend 1000s on equipment…I appreciate you checking out the video!
Looks great! Just shows what you can do with a little planning, the right equipment and a lot of talent! For a while Harbor Freight sold automatic air tank drains that would cycle every time the pump cycled on and off but cracking the valve on the bottom is a great tip and simple solution.
Thank you sir I appreciate you watching the video!
No complaints...Good job UPK!
Thanks I appreciate you checking out the video!
That is SICK HELLYA 🤘🤘🤘
I appreciate you checking it out Jesse 💯
Looks great. A big part of it is how smooth and consistent you are with your spray speed. Great job
Thanks I appreciate that and appreciate you checking out the video!
Exactly my thoughts he gots a consistent stroke ... That's a big part of spraying
Just getting into spraying and I have a small compressor. Thank you for the time sir
You’re welcome and I appreciate you checking out the video
Thank you so much for this. I'm just a home guy and didn't want to commit to a overspending on a compressor to paint a car. You earned my sub. Can't wait to see more.
You’re welcome and I appreciate you for subscribing to the channel!…I’m doing my best to show people that you can accomplish nice work without the big shop setup and the expensive tools
Looks awesome!!!
Thanks I appreciate that Joe and appreciate you checking out the video!
Nice job 🤠
In México we use that gun, it works so good and its a very usefull tool.
Thank you and it’s great to hear others having success with it💪🏾💯👍🏾 I appreciate you checking out the video
Love the drain tip, Tahoe looks great, thumbs up👍!
Thanks I appreciate you checking out the video and glad you liked the tip💯🤛🏾
@@UndergroundPaintKing is the drain partially open while spraying?
@@luisdiaz9142 yes it is,you just want it open enough to drain the water while spraying but not allowing to drain all your air from the tank
@@UndergroundPaintKingThanks for the reply!!
@@luisdiaz9142 you’re welcome!
Thanks for the video will definitely grab an LVLP.
You’re welcome and I appreciate you checking out the video!
You really helped me out, Appreciate it!
Glad I could help Cole!
I’ve never seen this channel before and I’ve been watching RUclips and auto body vids for more years than I can count.
This gentleman is humble, not a loudmouth and spitting facts.
I have different compressors, but for mid size jobs I use a 20 gallon husky from Home Depot. I spray clear in the mid 30’s for PSI with my 1.3 Iwata and I can hold the gun wide open nonstop and it and I never lose air pressure. It builds enough pressure that it’ll still shut off from building enough air.
Honestly
, you could use a ten gallon compressor to paint a hood, or a few panels at a time.
The only things I’d say is run the 1/2 inch air hose keep the hose as short as possible use the bigger fittings, make sure you get a compressor that takes oil, make sure you use a moisture trap before the gun…….. always make sure you open the bleed valve on the compressor when your done using it.
Most of the guys on RUclips even the diy guys make a lot of this stuff sound wayyy more complicated and confusing than it really is. Spraying is the easy part. The bodywork and prep is the hard part.
You’re spitting all facts and I appreciate you leaving this comment 🙏🏽💯
WOW...Proof it can be done with no BS. Love your approach to this. I bought the gun and am practicing panels first. Now I know if it doesn't work, it's me. Thank you.
You’re welcome and it’ll definitely work for you !
Bro I'm blown away, Nicely done!
Thanks I appreciate that and appreciate you checking out the video!
Love the vidoes man. Keep them coming
Thanks I appreciate you and definitely will keep the videos coming!
Damn bruh, I'm glad I found your channel. I've learned more watching you and sprayway customs in the past month, than all the big shots channels in years. My hat's off to you brother, I wish you all the success in the world.
I love this video more
Thank you I appreciate that
Thanks bro I’m glad that I could be of any assistance in the work that you are doing and I appreciate you checking out the videos!
This is THE most accurate comment for real. I feel exactly the same
SprayWray is awesome and so is UPK. Pharraway is great too. Also check out True Gritt. Not really a 'how to' channel, but he does some crazy pearl combinations that are great inspiration.
For what you had to paint that it looks great nice job 👏
Thanks Charlie I appreciate you checking out the video 💯🤛🏾
That is awesome. One of my fav colors as well.
Thanks I appreciate you Ken!…a lot of people love this color
King ...Fantastic job dude , you just showed us it can be done ...car looks the dogs danglers man 👍
Thanks I really appreciate you checking out the video!
The folks that say it can't be done either don't know enough, or charge big dollars for a paint job. Excellent video.
I'll be doing my 93 Z24 soon with an 8gal compressor, some water/oil filters, and some single stage. Two tone is also a good option for a small compressor setup as you can split up the spray time.
There is plenty videos on people doing paint jobs with small compressors so we can put that myth to rest…what color are you doing your Z24?
i watched ya last vid ordered this gun opened it on my channel couple days ago live after seeing this i wanna have me another one on deck lol and the money i would spend on a larger compressor i can buy some paint :-)
Definitely can go that route and save you some money and put it towards your paint
I have done the same with my 3M Accuspray and twinning 2 5 gallon contractor compressors together. You did great on your video and paint job!
Thanks I appreciate you and it’s always good to hear about people having success with small setups!
Amazing job love this channel.
Thanks General, I appreciate you checking out the videos 🙏🏽💯
I've been binge watching your videos. After watching another painters' channel. He's got a million dollar booth and arsenal of paint guns that cost more than my cars. You just get it done! I've been using the old Harbor freight pro gun for projects for 10 years. I normally shoot single stage urethane and it does a great job. But I'm on the fence now to get that Spectrum or Get the Astro. I see these other guys with booths and fancy climate controls and $800 guns they have orange peel, fisheyes, and dirt nibs everywhere. You spray in your little garage and it looks like glass. I did the roof of my 63 GMC panel truck in my driveway under a canopy. Great channel! You are the U.P. King!
Thanks I really appreciate you for this comment because I really try to show people that you can have quality work done by you yourself and not have to have all the fancy equipment that others say you have to have…again I appreciate you checking out the videos and I hope they help in any way possible!!!
I love my people's 👋👋👋👋👋👋👋👋👋. I can feel the humble spirit👍. Great job king.
Thank you I really appreciate that and appreciate you checking out the video!!!
Been waiting for this one for a long time, you bring lots of inspiration for the little guy, good job brother.
Thanks I appreciate you and hope I can bring more inspiration to others!
@@UndergroundPaintKing just found your channel and subscribe.
@@MegaWatching thanks I appreciate you subscribing to the channel!
Love the videos teaching me alot
I’m glad the videos are helpful!
UPK back at it.! 🔥🔥🔥🔥Showing you a real painter compensates no matter the gun or set up to get that same good result! Props man. Those Tahoes are a lot bigger in person.
Bro them Tahoes really are big in real life…I appreciate you bro as always 💪🏾💯
I have owned a Sprayit 3300. It was a great gun BUT after four paint jobs the inner teflon bushing for the needle started leaking and I was unable to get any parts for it. I would definitely recommend this gun to anyone. Just be aware of issue after a couple of uses.
Did you use it doing 4 complete jobs when it started leaking? I myself have used it 3 times now and definitely will keep this in mind and appreciate you letting me know about this
@@UndergroundPaintKing yes unfortunately it did. But it was definitely a good gun. Not sure if the 3300 has better parts. I do play to purchase another one for small jobs. I used a Tekna copper now GREAT GUN!!
I think you are a pro and made it look easy. Awesome 👍😎
Thanks I appreciate that and appreciate you checking out out the video 💯🤛🏾
Nice job painting that beast with the LVLP and a HF compressor!
Thank you sir! I appreciate you checking out the video!
Looks good. But why on earth would you paint over the emblem glue? Just asking.
Painting over the emblem glue doesn’t effect anything an shows you where exactly the emblem placement is…I appreciate you checking out the video!
You my friend got a new subscriber!.. 👏🏽👍🏽 looks good now I need help finding out the measurements on how much reducer and paint and clear coat to use I would I appreciate that’s where I need the help of you have video of that already please link it on my conversation thank you
I appreciate you subscribing to the channel and I do have a video that may help you
ruclips.net/video/GU1XFq6SWDY/видео.html
How you mix your paint and clear depends on the brand that you go with and their mix ratio for their products so just check the label of the products or get tech sheets with the information on how to mix
I'm getting ready to paint a '97 honda crv with a similar setup because of this video. Props to you UGK! I'm not a painter but have a overall idea of how it needs to look. Thanks for the video!
You’re welcome and I hope it turns out nice for you!
So far your the only one who explains everything very well. And yr not in a hurry to explain. You have definitely encouraged me to start painting, I’m just a beginner, thanks for taking yr time to make these videos…God Bless you !
I’m glad to hear the videos were encouraging to you and I know you’ll do great Israel!
No sé inglés pero es "awesome"
Gracias, te agradezco que hayas comprobado el vídeo!
Thanks for the video great job man.
Thanks Chris I appreciate you checking it out and I hope it was helpful!
Killer video dude, thank you :)
Thanks Jacob I appreciate that and appreciate you checking out the video!
Nice job, it's because people like you I'll be painting my truck soon... Thank you so much.
Thank you and you’re welcome…I’m glad to hear that you’re going to be doing your truck soon and I hope it turns out just how you want it bro!
Awesome man! You’re giving the confidence to give my little car a shot at a new life!😎🤙🏋️♀️
Go ahead and give it new life Bunt💯 you can definitely do it 💪🏾
Excellent video! It was just what I was looking for. I've been looking into lvlp guns for a while but I wasn't able to find any information about painting an entire car. It looks like the paint laid down perfectly with no orange peel. You did some excellent work Sir.
Thanks Jamie I appreciate you checking out the video and you will be happy with a lvlp spray gun if you get yourself one!
You're A Beast With That Setup!!!!!
Thanks I appreciate that and appreciate you checking out the video!
Absolutely amazing work
Thanks I appreciate you checking it out!
Got me movatied to pick up my 1st spray gun nice job need to check out the videos again for part# I remember you saying 1 was heavier than other definitely been watching 👀✌🏽
That’s what I like to hear…the first video was on the Campbell Hausfeld spray gun which I need to do another video on but both will work good for you!…I appreciate you checking out the videos 💯
OMG!!!!! LOOKS GREAT!!!!💪💪💪💯
Thanks I appreciate you taking the time to check it out 💯🤛🏾
Ima do this Elco single stage. I was thinking of doin this exact set up. You just made up my mind. Good work n great video!
Thanks I appreciate you checking out the video and glad it could help in anyway!
Great job
Turned out great 🔥
Thanks bro I appreciate you💯🤛🏾
Super paint job upk looks great. I use that tip too on the compressor too for my air tools it works good. Great video upk
Yeah it’s a great tip and can save your tools in the long run…Thanks James I appreciate you checking out the video!
Bro your shop is awesome. Man goals right there.
Thanks I appreciate that and appreciate you checking out the video and liking the shop!
Man that came out great.
Thanks Michael, I appreciate you checking out the video!
Excellent job man Great job . Looking great.
Thank you, I appreciate you taking the time to check it out!
I just received my sprayit 33000 can’t wait to try it out with the exact compressor, thanks UPK.
Good to hear Victor, let me know what you think about it!
i remember the good old days hanging out in a garage working and painting cars with a couple old buds looks good, keep up the good work
Thanks Lisa I appreciate that and appreciate you checking out the video…it would be nice to have more good old days!!!
Hey King I thank you so much for the outstanding and Great videos!!! I just bought the Spectrum HTE and now I will order this paint gun as well to paint my 07 Chevy Tahoe!!! Please keep up the great work and GOD BLESS YOU brother!!!
Thanks I really appreciate you for this comment it really helps to keep going and creating more content and I hope that the videos are helpful…God Bless You!!!
Great job , so informative, your help with understanding how to paint is very appropriated , thank you.
You’re welcome and I’m glad the video was helpful!
Came out real nice 👍 👑 love it great job 👍
Thanks I appreciate that and appreciate you checking out the video 💯🤛🏾
This came out 🔥
I appreciate that and appreciate you checking it out💯🤛🏾
Awsome video, I have a 21 gal compressor and was going to buy a new 30 gal to paint my '77 truck. great job, the Tahoe looked fantastic. Thanks for posting.
Thanks I appreciate you and glad to hear you plan on putting in the work yourself!!!
Love that gray, nice.
It’s a Dodge color…I appreciate you checking out the video!
mann you killed that paint job 💯💯 thanks for the tips UPK 🤙🏽
Thanks bro I appreciate you checking out the video💯
Giving credit where it's do. The person makes a difference too. Like video don't let no one tell you you can't . lovin it
Yes sir !…I appreciate you checking out the video
It came out beautiful brother keep up the great work
Thank you I really appreciate it!
Came out super nice 👍🏻👍🏻
Thanks I appreciate you checking it out 🤛🏾💯