Save yourself the headache and just go with Bilstein 5100 adjustable shocks. I had these and the ride quality is horrible and sounded like I was damaging the front end going over bumps.
@@--emt 2014 Ram 1500. I love the ride quality from the Bilstein, even put Bilstein on the rear. You can go with those spacers if you want to but don't say you wasn't warned
Thank u . Yah i don’t see spacer holding bushing that’s in there down . Looks like it’s doing nothing with that big hole in the middle . Some things are just to good to be true
The kit I just received looks different. I have a 2010 2wd qaud cab with the hemi. Why won't this kit work on mega cab? What does that have to do with the front suspension.?
Is it true that after putting a leveling kit on like this that going up to a bigger size tire will work in the upper control arms favor pushing it up in the favorable direction for slightly better geometry? Trying to find out if I should go up a size bigger or not? Thanks!
I just receive my lift kit for my 2007 Dodge Ram 1500 quad cab SLT 4x4 the front lift blocks measured out to be 1.75 inch and I order 3.50 inches it there a reason for that or did they sent me the wrong ones. Thanks in advance.
I'd recommend giving Supreme Suspensions a call or email with their specific item number just to make sure, but you should be fine! Independent front suspension spacers are a little bit different than lift blocks like you'd use on leaf spring applications. The block itself gives extra height once installed with the rest of your suspension. The height of the spacer itself though doesn't equal the height gained, if that makes sense. -Zach
rim size has no bearing on it. If a tire is 33 inches, it is 33 inches no matter what rim you use because....it's 33 inches. the answer is yes, as he said, it WILL fit 33, even 35 inch tires.
Great way to cross thread the shit out of those nuts on the spacer. You hand thread them FIRST THEN use the impact not just slap them on top of the bolts and start with the impact because if they are slightly sideways and you use the impact they will cross thread however they are sitting
@@ridgedbullet2420 Actually it is on the rams there’s gonna be a lot of positive camber and toe is going to be off so is the caster.I do a lot of leveling kits on the rams and alignments definitely a must
No rub lock to lock except at 32 ish seconds... After watching a few of these videos I fell like this company just finds random actors to put these mods on the truck.
Please, for the love of God, an Impact gun IS NOT a torque gun. Do not put yourself and the lives of your passengers at risk because you used and impact to just hammer every nut and bolt home. This gentleman is NOT a certified mechanic and does not understand how detrimental over torquing a fastener can be!
here's my 19 'classic' 4x4/ 5.7/ 2" Fox strut level kit, 35x12.50 zero-offset. Minor plastic rub, few zipties no prob. Maybe 34" next time.. photos.app.goo.gl/ghGxxAYqMXMMPs5R6
Shop this Supreme Suspensions 2" Pro Billet Strut Spacer Leveling Kit: amtrucks.at/2OAFPKu
Subscribe for Weekly RAM Truck Videos: bit.ly/2G7fgWv
What wheels are on the 33" tires?
The sound on this vid is jacked up.
Save yourself the headache and just go with Bilstein 5100 adjustable shocks. I had these and the ride quality is horrible and sounded like I was damaging the front end going over bumps.
What do you mean by sounded like ?
What type of truck did you have Didn't want to go with the 5100 because the ride quality is super stiff this is using the oem shock
@@--emt 2014 Ram 1500. I love the ride quality from the Bilstein, even put Bilstein on the rear. You can go with those spacers if you want to but don't say you wasn't warned
Thank u . Yah i don’t see spacer holding bushing that’s in there down . Looks like it’s doing nothing with that big hole in the middle . Some things are just to good to be true
When specs on rims and tires
The kit I just received looks different. I have a 2010 2wd qaud cab with the hemi. Why won't this kit work on mega cab? What does that have to do with the front suspension.?
Is it true that after putting a leveling kit on like this that going up to a bigger size tire will work in the upper control arms favor pushing it up in the favorable direction for slightly better geometry? Trying to find out if I should go up a size bigger or not? Thanks!
I just receive my lift kit for my 2007 Dodge Ram 1500 quad cab SLT 4x4 the front lift blocks measured out to be 1.75 inch and I order 3.50 inches it there a reason for that or did they sent me the wrong ones. Thanks in advance.
I'd recommend giving Supreme Suspensions a call or email with their specific item number just to make sure, but you should be fine! Independent front suspension spacers are a little bit different than lift blocks like you'd use on leaf spring applications. The block itself gives extra height once installed with the rest of your suspension. The height of the spacer itself though doesn't equal the height gained, if that makes sense. -Zach
What kind of headache rack is that?
My next buy !!!!!
Torque specs? We don’t need those lol.
Will it damage the truck in any way through average use? 2017 ram
I have the same truck 17 ram 1500 did you end up putting it on how how is it riding. I don't want a firm ride.
Why I keep seeing hammering on aluminum parts with steel hammers instead of brass or deadblow on this channel?
Does anything need to be modified to add these ( ball joints, sway bar link ect ? )
Lou Indorato upper a arm with ball joint that is made to use with lift kit
Great vid, very informative, thank you
35x what size tires
Can u fit 33’s with 20 rims with that spacer
All day long. These trucks come bone stock with 33s mounted on 20s
jose t back
rim size has no bearing on it. If a tire is 33 inches, it is 33 inches no matter what rim you use because....it's 33 inches. the answer is yes, as he said, it WILL fit 33, even 35 inch tires.
Do you have to lift the back ?
Not at all! If you just want to level the front of the truck, you can! -Zach
Great way to cross thread the shit out of those nuts on the spacer. You hand thread them FIRST THEN use the impact not just slap them on top of the bolts and start with the impact because if they are slightly sideways and you use the impact they will cross thread however they are sitting
Not to mention when he slapped the threds on the upper ball joint with the hammer lol
@@joshdavis9289 that was definitely hard to watch
And need an alignment
Actually not right away. It's a camber so it's not needed
@@ridgedbullet2420 Actually it is on the rams there’s gonna be a lot of positive camber and toe is going to be off so is the caster.I do a lot of leveling kits on the rams and alignments definitely a must
What about 2wd
same question here did you ever find it
Will these work on a 2wd ram 1500?
I have the same question, did you ever figure it out
@@fabiostevioanddaid7678 i ended up getting a 3" front level spacer and like 1.5" rear spacer kit on ebay
@@jasonshiner2006 thanks
No rub lock to lock except at 32 ish seconds... After watching a few of these videos I fell like this company just finds random actors to put these mods on the truck.
Please, for the love of God, an Impact gun IS NOT a torque gun. Do not put yourself and the lives of your passengers at risk because you used and impact to just hammer every nut and bolt home. This gentleman is NOT a certified mechanic and does not understand how detrimental over torquing a fastener can be!
amen
stfu!!! therr isnt a mechanic in the world who uses a regular ratchet jackass. now keepcur negative shit to urself
here's my 19 'classic' 4x4/ 5.7/ 2" Fox strut level kit, 35x12.50 zero-offset. Minor plastic rub, few zipties no prob. Maybe 34" next time.. photos.app.goo.gl/ghGxxAYqMXMMPs5R6
Am I the only one that saw that hyperextended ass upper ball joint to the upper control arm??
There is no weight on the suspension. It is at full travel. Once the truck comes of the hoist, that will level; out a lot more.
Majoras Mask Muahahahahah
CHANNEL LOCKS NOT VICE GRIPS...