So much more coming, I'll have a review out of a new NERF Fortnite blaster tomorrow. Just busy with some other things behind the scenes. MAKE SURE YOU CHECK OUT THE NEW MERCH! Socks, Posters, Stickers, Shirts, and more with new designs! www.teespring.com/stores/fuzzy-walrus-industries
"hard hitting" no mate, it is low end airsoft, you can use that in airsoft and people will be confused by it, foam dart hitting low end airsoft, hell i would be confused
@@osmacar5331 yeah gotta agree with you on that if it 200 FPS easily then it’s like half of my P90 in power and that’s fucking crazy for a foam dart blaster
Osmacar im guessing youve never been shot with a 200-300fps dart before. Theyre heavier and bigger then bbs therefore take more power to shoot the same fps. 250fps darts feel the same as getting shot with airsoft or paintball guns. They most definitly leave welts
Wow!!!! Thanks Walcom for the awesome review, I'm glad you like your Lynx! I think perhaps it is time to fix the trigger guard wobble in the files hahaha
I watched their break-down/assembly video and the slam-fire comes at the cost of being able to de-prime due to the way they designed their catch system. Its a very well designed catch that actually can be upgraded if you chose to use even heavier spring loads.
Valour, I think you comment on other people’s video more than people subscribe to you, which is sad, and I wish I could do something to help because I love your builds
hasbros blasters arent as expensive (besides those fortnite blasters), they are easier to purchase , the quality is usually better and smoother than 3d printers (but then again i prefer 3d printed blasters over hasbros nerf gunanz)
Literally nothing I go to wars still we social distance and wear masks but like everyone there has 3d printed stuff worker mags adventure force darts theres very rarely nerf stuff anymore
Hasbro going forward can be for the plinkers and kids mostly, as they intended. There is something in taking a stock Nerf blaster and making it hit 150+ though. Painting it up and customizing. Great for cosplay too.
Thanks for this awesome review! The quality of Silver Foxes printing is visible in your close up footage. I have been thinking about getting a Talon Claw recently and then the videos for the V2 Lynx started to drop. Yours answered all of my questions and then some. I now know the next blaster for my arsenal, once again thanks.
Only improvement I would like to see: priming piece variant so you get the priming grip on the side and can add an underbarrel blaster. Otherwise this looks pretty damn cool!
My most favorite part of the blaster is the design. It looks very much like a KSG12, which is my favorite gun of all time. Well, a mag fed KSG12 which makes it even better
been a while since i watched the walrus, and the first vid i watch, a blaster hitting low end airsoft, so, as someone who is eventually going to get into it, that is very impressive in all the aspects
You don't swap springs from the back. Pop the front pin, pull off the top rails and pull out the pump assembly. Then you dont have to completely disassemble the rear end. Also my trigger guard isnt loose. It all comes down to print tolerances.
Wow! This blaster is amazing! I was thinking of building myself a bullpup Talonclaw but due to slam-fire and its low profile, I'm thinking I may build one of these instead. Thanks for the awesome video Walcom!
one point that is super important is that this blaster has 0 dead space. It is only as big as it needs to be. USually those blasters dont have a stock, but this is a bullpup.
WS7 What a super cool blaster. Thanks for giving us the low down. You sir give us the coolest and most entertaining reviews. Thanks for the energy and enthusiasm it js fantastic. Keep up the great work.
Nerf Elite line: good Nerf Rival line: amazing Adventure Force/DartZone Pro line: the best 3d printed: the bestest Nerf Elite 2.0 line: haha shitty reskin go brrrrrrrr
Springer, Slam-Fire, 200+ fps, Bull-Pup...hmm, never thought I would see those 4 words together describing one blaster. and the website says it's only $80? Crazy...That's like Ceda-S pricing.
Nerf Elite line: okay Nerf Rival line: good Adventure Force Pro line: amazing 3d printed: the best of the best Nerf 2.0 line: haha shitty reskin go brrrr
reminds me a bit of that design coop did a vid on a few years ago. I think the one he did was made by someone going by zalah (idk how its spelled) and it was basically this thing but bigger and made of PVC and cutting board material, Kinda cool how much the hobby's evolved in such a short amount of time.
I bought elite U-burn printed parts from SFI and my print quality was fluffing amazing. I cannot stress how much you should order any printed blasters from SFI.
I'm trying to find a way to make Retaliators slam fire. I think it would work with two catches, a new plunger with two catch things, and a boltsled with a stick in the end, so that when primed, both catches engage, and when the slide is forward, it releases the second catch, so you can fire normally, or in slam fire
At this point the biggest point in favor of the classic burn setup is just how stupid proof they are. Having built a lynx and a few burns, the lynx was much more finnicky and involved on the printing side of things. I have never had to reprint a part for a burn, but the lynx required it. Considering how little plastic it requires it wasn't a big deal tho.
I bought my son one several months ago. Didn't need instructions to assemble. Silver fox was a breeze to purchase through, love it. Definitely going to be buying more blaster from them. At what fps do we start calling them markers though lol...🤔
I have the same opinions as you. Note though this thing can hit 300fps with slamfire? and its a compact bullpup? If you don't thow money at orion blasters for one of these.... I dunno who you are, but ya aint human.
If I had solidworks, I could make a working p90 for nerf with working dart mag. The mag would work just like the real one, BUT the way to propel the darts would be 3 pairs of small flywheels. I really wish I had the hardware and software.
A drop of crazy glue or epoxy in between the trigger guard and handle would fix that in less than 5 minutes, just making sure you don't forget it's a super easy fix....
Hey Walcom S7, you should make another "If I could have 5 recent NERF Blasters, these would be it" video. I know the Nexus Pro would be on the list even though it's not a NERF brand blaster.
So much more coming, I'll have a review out of a new NERF Fortnite blaster tomorrow. Just busy with some other things behind the scenes. MAKE SURE YOU CHECK OUT THE NEW MERCH! Socks, Posters, Stickers, Shirts, and more with new designs! www.teespring.com/stores/fuzzy-walrus-industries
Are you gonna do a 100k subscriber special?
@Walcom S7 Is it the rifle or drum gun?
Rebel mech rebel mech rebel mech
Can’t wait for the halo mod 😁
Oh god i love how you drown us with anime dreampop
Here before the eventual "BUT WHY BUY DIS WHEN I CAN BUY A NEXUS" comments XD
Can't wait to get a Lynx myself.
Why this when I could buy a CEDA?
Lol.
IKR
@William Kuncio homeless was joking
Slamfire, bullpup, hard hitting, what don't you want out of a blaster like this. Also it looks flippin amazing
"hard hitting" no mate, it is low end airsoft, you can use that in airsoft and people will be confused by it, foam dart hitting low end airsoft, hell i would be confused
@@osmacar5331 yeah gotta agree with you on that if it 200 FPS easily then it’s like half of my P90 in power and that’s fucking crazy for a foam dart blaster
@@sparkthefloofyprotogen3556 you can also do a higher FPS with the darts to get the same force of a bb, hard vs soft Materials
Most Airsoft guns shoot like 350-500 fps
Osmacar im guessing youve never been shot with a 200-300fps dart before. Theyre heavier and bigger then bbs therefore take more power to shoot the same fps. 250fps darts feel the same as getting shot with airsoft or paintball guns. They most definitly leave welts
Wow!!!! Thanks Walcom for the awesome review, I'm glad you like your Lynx! I think perhaps it is time to fix the trigger guard wobble in the files hahaha
You know when it’s good when Walcom says: “it does this”
My personal Lynx hits 300+
is that even possible holy sheet
He val, what spring you have in there? How’d you do that?
I have a question, do you even need a caliburn anymore?
How are you getting it to hit 300 fps, do you have a k26 with a k31 sitting inside?!
@@the_yesnt1358 18.5kg Turf Spring, and a barrel swap
Walcom S7: this is my favorite primary blaster out there right now
Me: wow, ok big claim
Walcom S7: (shows 200+ FPS shots)
Me: WHAT!!
Less than thirty seconds in and I'm in love
With this blaster I should say; the guy holding it isn't bad neither
Same
Took me 12 seconds
huh, you’re here too.
I watched their break-down/assembly video and the slam-fire comes at the cost of being able to de-prime due to the way they designed their catch system. Its a very well designed catch that actually can be upgraded if you chose to use even heavier spring loads.
That's not too bad a trade off considering you don't have to prime to swap mags.
I love my 3 that I've built, lol
sup valour!
Valour, I think you comment on other people’s video more than people subscribe to you, which is sad, and I wish I could do something to help because I love your builds
Why need Hasbro, when we have 3d printers.
For the mags
@@atealime Hasbro don't make any short dart mags
hasbros blasters arent as expensive (besides those fortnite blasters), they are easier to purchase , the quality is usually better and smoother than 3d printers (but then again i prefer 3d printed blasters over hasbros nerf gunanz)
Literally nothing I go to wars still we social distance and wear masks but like everyone there has 3d printed stuff worker mags adventure force darts theres very rarely nerf stuff anymore
Hasbro going forward can be for the plinkers and kids mostly, as they intended.
There is something in taking a stock Nerf blaster and making it hit 150+ though. Painting it up and customizing. Great for cosplay too.
This is the basically the best blaster you can get because it looks good, slam fire, accurate, and hits 200+
O:38 hits himself in the face with a dart love ya walcom
*0:38
Thanks for this awesome review! The quality of Silver Foxes printing is visible in your close up footage. I have been thinking about getting a Talon Claw recently and then the videos for the V2 Lynx started to drop. Yours answered all of my questions and then some. I now know the next blaster for my arsenal, once again thanks.
"This Blaster is go'n places!"
it looks awesome and glad you covered it my friend. I enjoy what the Community brings to the table.
Remember that there will one day be a tag-back on this... by then blasters might be able to break glass, not to diss on this legend of a blaster
Only improvement I would like to see: priming piece variant so you get the priming grip on the side and can add an underbarrel blaster. Otherwise this looks pretty damn cool!
My list to make my favorite blaster
Bullpup
Pump action
150+fps
Never thought this day would come
This is beautiful, i've been watching this for 5 hours now
Simplicity is so incredibly beautiful
My most favorite part of the blaster is the design. It looks very much like a KSG12, which is my favorite gun of all time. Well, a mag fed KSG12 which makes it even better
Nice video bro !
I need this in my life ASAP
been a while since i watched the walrus, and the first vid i watch, a blaster hitting low end airsoft, so, as someone who is eventually going to get into it, that is very impressive in all the aspects
I got try one out a few months back, they're pretty great.
The slamfire just puts it over the edge for me. I know what I'm building now
You don't swap springs from the back. Pop the front pin, pull off the top rails and pull out the pump assembly. Then you dont have to completely disassemble the rear end. Also my trigger guard isnt loose. It all comes down to print tolerances.
Kinda wishing there was a full length dart version. Is that weird? I guess I just have a hard time getting into half lengths.
To each their own. I'm juggling around 7 different ammo types between blasters so I'm hesitant to add half darts to the mix also.
Same
Same
Wallcom “OH MY GOD IT HAS SLAM FIRE!!!” I a mechanical engineer in training... “It’s only an auto sear”
This is the coolest blaster ever made! I really hope they manage to injection mould the printed parts and manufacture a metal trigger😱
walcom just cant stop smiling when he has this in his hands
Wow! This blaster is amazing! I was thinking of building myself a bullpup Talonclaw but due to slam-fire and its low profile, I'm thinking I may build one of these instead. Thanks for the awesome video Walcom!
If I ever get some money and a 3d printer, this is what I'm making.
This is just the super premium Raider.
Very funtional - thanks!
Coming from a mostly pistol-primary user this is probably the best primary I've used for games so far.
Basicly the peak of springers
one point that is super important is that this blaster has 0 dead space. It is only as big as it needs to be. USually those blasters dont have a stock, but this is a bullpup.
LYNX to everything in the description I giggled at that thanks for the great vid
That looks... like the best primary possible.
WS7
What a super cool blaster. Thanks for giving us the low down. You sir give us the coolest and most entertaining reviews. Thanks for the energy and enthusiasm it js fantastic. Keep up the great work.
Definitely getting one, thanks for making a video on it. Love bullpup
Looks sweet...
Love everything about this but I wish it was a tube magazine, someone needs to make that
When the slamfire shots came back i thought: "you are absolutly no wimp"... Then i subbed to your channel.
Great video as always
The design is very efficient with ram fire and allow powerful spring to be installed.
I’m very excited to get mine assembled. Excellent content as always.
Ok, I have always loved bullpups, this is a dream, right? xD
Great video. That thing is wicked sweet man. Keep up the great work.
I need this in my life right now
Literally the only improvement that I can see to this blaster is to make it double-barreled....... other than that, it is bae 😍
I just felt the need to tell you that one of the adds I got during this video was for the Nerf Elite 2.0 Turbine. Do with that info what you will
Nerf Elite line: good
Nerf Rival line: amazing
Adventure Force/DartZone Pro line: the best
3d printed: the bestest
Nerf Elite 2.0 line: haha shitty reskin go brrrrrrrr
I got an ad for the Pharoah
@@cofef3e906 lol
@@MrMarty0219 it wasn’t this video, but Dracs review on the ultra one
@@cofef3e906 oh... well then... go away no on cares then
Springer, Slam-Fire, 200+ fps, Bull-Pup...hmm, never thought I would see those 4 words together describing one blaster.
and the website says it's only $80? Crazy...That's like Ceda-S pricing.
Nerf Elite line: okay
Nerf Rival line: good
Adventure Force Pro line: amazing
3d printed: the best of the best
Nerf 2.0 line: haha shitty reskin go brrrr
haha shitty reskin go *CRACK SNAP* “are you kidding me?!”
I love this channel!
This is so cool
I honestly think It's a good side-arm for the Caliburn. Caliburn for long-range and the Lynx for close-to-mid range.
reminds me a bit of that design coop did a vid on a few years ago. I think the one he did was made by someone going by zalah (idk how its spelled) and it was basically this thing but bigger and made of PVC and cutting board material, Kinda cool how much the hobby's evolved in such a short amount of time.
I bought elite U-burn printed parts from SFI and my print quality was fluffing amazing.
I cannot stress how much you should order any printed blasters from SFI.
Dude, this one shines 😎
Incoming Rebound!
This looks interesting.
Oh neato. Looks so cool Appreciate the vids.
Oh man, that Lynx is DopeAF! Was looking at TalonClaws to pair with my SpringThunder... but I’m pretty sure the fuzzywalrus just convinced me..
a nerf bullpup that actually works like a bullpup
Thats a lotta damage
It is awesome
2:05 😳🤭🤦🏿♂️ 😂 🤣 💀
RUclips wouldn't let me not watch this. I knew I would love it and I knew I would be disappointed since I can't get it.
Add a shortened mag and a paintjob and there you have Glaz's gun
Now that’s a cool looking nerf gun
F for the Talon Claw
I'm trying to find a way to make Retaliators slam fire. I think it would work with two catches, a new plunger with two catch things, and a boltsled with a stick in the end, so that when primed, both catches engage, and when the slide is forward, it releases the second catch, so you can fire normally, or in slam fire
At this point the biggest point in favor of the classic burn setup is just how stupid proof they are. Having built a lynx and a few burns, the lynx was much more finnicky and involved on the printing side of things. I have never had to reprint a part for a burn, but the lynx required it. Considering how little plastic it requires it wasn't a big deal tho.
My guess how it works is the spring and plunger are just for show, and instead of using air it is literally using magic
I love how skinny the blaster is, it looks sexy in my opinion
I bought my son one several months ago. Didn't need instructions to assemble. Silver fox was a breeze to purchase through, love it. Definitely going to be buying more blaster from them. At what fps do we start calling them markers though lol...🤔
Looks like a Steyr AUG
Can we just nickname this the yeet canon?
mm yes
I have the same opinions as you. Note though this thing can hit 300fps with slamfire? and its a compact bullpup? If you don't thow money at orion blasters for one of these.... I dunno who you are, but ya aint human.
looks like a nerf KSG but a stick mag instead of tube mags
I don’t need it
I don’t need it
No I don’t need it
I need it
ERM EXCUSE ME, NO GUN FLIP???
jk its 3d printed glory shouldn't risk that
If I had solidworks, I could make a working p90 for nerf with working dart mag. The mag would work just like the real one, BUT the way to propel the darts would be 3 pairs of small flywheels. I really wish I had the hardware and software.
As a gun nerd, the position of that mag infuriates me... Nice vid tho!
A drop of crazy glue or epoxy in between the trigger guard and handle would fix that in less than 5 minutes, just making sure you don't forget it's a super easy fix....
TAKE. MY. M O N E Y.
Hey Walcom S7, you should make another "If I could have 5 recent NERF Blasters, these would be it" video. I know the Nexus Pro would be on the list even though it's not a NERF brand blaster.
I almost choked on my cereal when I saw 205 fps.
That kinda seems amazing lol I want one for myself
Who else would love to see nerf war gameplays?
Intriguing
I just found a vigilon WITH DISCS and a night finder and that might seem like a bad find but it's super fun for me
I was looking for brett at 8:08
Love you
Im gonna post here too.There is a similar product to the tac rival finisher out for the aeon pro. Do with that what you will my fuzzy walrus friend.
I would love to find a spring that makes the Lynx hit HvZ levels.