Quick bumper fix trick for Xbox Elite Series 2

Поделиться
HTML-код
  • Опубликовано: 21 авг 2024
  • Quick bumper fix trick for Xbox Elite Series 2
    When attempting this, do not use any Isopropyl alcohol content under 70%, the lower the content, the more water the is, and the controller can corrode. Use with caution.
    Only 99.9% IPA is recommended when keeping it turned on as it is non conductive and evaporates quickly.
    For any controller repairs, please visit us at controllerrepa...

Комментарии • 70

  • @Vulkanzed-117
    @Vulkanzed-117 Год назад +73

    Wish I would've done this before I got rid of my elite controller

  • @Hacker423.
    @Hacker423. 8 месяцев назад +52

    IF THIS DOES NOT WORK:
    My bumper had an issue where it would only click if I pressed hard
    I cut out a small piece from the sticky part of a sticky note and attached it to the plastic part in the bumper. It adds a tiny bit of height so that gentle clicks still apply full force.
    Hope this helps!

    • @camma1499
      @camma1499 8 месяцев назад

      That's my problem

    • @Unknown_Vibe999
      @Unknown_Vibe999 7 месяцев назад +5

      i had the same problem i just put wd-40 in it and gave it a few clicked until it tried and it was working fine if it ever comes to it i hope it helps cause 130 to 160 dollar controller just for it to do that is crazy

    • @Lars-.-
      @Lars-.- 7 месяцев назад +4

      And this helps for 1day or 1 week and then it starts double clicking again... tip: don't buy the elite series 2 again.. big trash controller, i had atleast 5. Best pro controller for me is the scuf instinct pro, never had problems

    • @Ilock2k
      @Ilock2k 7 месяцев назад

      if it dont work the controller breaks

    • @JokerGaming-iv1tm
      @JokerGaming-iv1tm 4 месяца назад

      Mine too

  • @brianjones7373
    @brianjones7373 12 дней назад

    This worked for me,my left bumper worked intermittently, tried this and it worked, thank you, you saved me £150 for a new one 😊

  • @cameroncondon35
    @cameroncondon35 8 месяцев назад +16

    I just use the back Paddle as bumpers I thought I wouldn't like it but honestly I prefer it now.

    • @doomguy7724
      @doomguy7724 2 месяца назад

      Doent that mean that you have to have abxy as your bumber then?

  • @jared58974
    @jared58974 10 месяцев назад +5

    instead of iso use bw100, a better solution since its a contact cleaner that wont eat your plastic like alcohol. Non conductive like alcohol

  • @simonopsable
    @simonopsable 2 месяца назад

    Literally all I needed!! Thank you!!

  • @Doge1918
    @Doge1918 9 месяцев назад +1

    thank you so much for the help I tought it wouldnt work but it does

  • @pauledwards7839
    @pauledwards7839 21 день назад

    Thank you, it works perfectly now😊

  • @ribkid1034
    @ribkid1034 4 месяца назад

    Ngl this works I was about to have a heart attack when my rb stoped working but this helped a lot money saved 😅😅

  • @Thatoneplaystationgamer
    @Thatoneplaystationgamer 11 месяцев назад +4

    You got stick drift

  • @emilianoalvarez-trenado2783
    @emilianoalvarez-trenado2783 9 месяцев назад +3

    but how do i fix bumpers because they don’t click now

  • @cosmo9456
    @cosmo9456 Месяц назад

    First try inserting a piece of cardboard in the bumper and sliding it around and then blow in the sides of the bumper with a straw before taking it apart

  • @xxeroxxasxx_653
    @xxeroxxasxx_653 7 месяцев назад +3

    What can I use if I don’t have one of those tools? Not every person has those things just lying around

    • @1Cx2
      @1Cx2 5 месяцев назад

      i used tweezers

    • @xxeroxxasxx_653
      @xxeroxxasxx_653 5 месяцев назад

      @@1Cx2 I ended up using a butter knife and tweezers lol

  • @morrisdennison8039
    @morrisdennison8039 2 месяца назад

    Your tactile switches don’t have much life left, you need new switches and they cost like 45 cents a piece if you have any experience soldering it’s the correct option

  • @steam-SMOKEY
    @steam-SMOKEY 9 месяцев назад +3

    WD40 works a dream 👌

  • @strzelba44
    @strzelba44 Год назад +2

    Ja wyjąłem baterie i kilka razy nacisnąłem każdy przycisk. Potem włożyłem baterie i wszystko działało.

  • @Xeonwhy
    @Xeonwhy Год назад +10

    Is there any other alternative to isopropyl alcohol?

  • @nehucaldo3277
    @nehucaldo3277 11 месяцев назад +3

    what about the stick drift? 💀

    • @szymi13_
      @szymi13_ 10 месяцев назад

      You can't really fix it permanently afaik

    • @joshuaavalos529
      @joshuaavalos529 8 месяцев назад

      You have to replace that L OR R stick mechanisms but make sure to do research and have proper tools to do the change the stick mechanism replacement shouldn’t cost too much

  • @steven1739
    @steven1739 Год назад +2

    And what about the stick drift

    • @Daichii_
      @Daichii_ 9 месяцев назад

      Try change the sence or smth

  • @trebor2485
    @trebor2485 Месяц назад

    I do this but it only fixes it for maybe a month before im forced to do this again

  • @seamagician7042
    @seamagician7042 12 дней назад

    Does it leave any damage on the grips when you separated them like that ? My only concern. Also where does one buy some good parts separators from ?

  • @Saladthemanzyo
    @Saladthemanzyo 11 месяцев назад +1

    W mans it works now

  • @goosguy2029
    @goosguy2029 7 месяцев назад

    BRO IT WORKED

  • @FireJ16
    @FireJ16 2 месяца назад

    Bro my bumper is so broken it’s coming off 😂

  • @Cee0666
    @Cee0666 11 месяцев назад +1

    Question: what can I do to fix the bottom hinge button on the series 2 controller. The removable bottom buttons. The small hinge buttons won't click the button anymore. And suggestion would ve greatly appreciated

  • @jtking588
    @jtking588 7 месяцев назад

    love you bro

  • @steboat
    @steboat Год назад +1

    Is there anything i can do to get stripped screws out of the paddle mother boards? Ofc the tiniest screws that get messed up.

  • @Mizztah_D
    @Mizztah_D Год назад +1

    There's. Cable connecting the faceplate? What do I do to disconnect it ?

  • @ANTIFRRRR
    @ANTIFRRRR 3 месяца назад

    i dont have a plastic spudger

  • @suibom647
    @suibom647 Год назад +2

    Do you know how to do this for a normal series x controller?

    • @ControllerRepair
      @ControllerRepair  Год назад

      The use of IPA is identical, though to open it you need to pull off the grips, unscrew 4 screws and 1 under the sticker below the battery to open it.

  • @user-cz8sy7ef9p
    @user-cz8sy7ef9p 7 месяцев назад +1

    Day 25 of asking you can you fix my rb button

  • @xenocx1092
    @xenocx1092 9 месяцев назад

    The lb and all the pádels doesn’t work on the left side but like if I press down on the Fran the padels work but when I let go they dotk work again and the lb is just completely gone

  • @Dead_mouse123
    @Dead_mouse123 2 месяца назад

    So can I use a guitar pick to open it?

  • @IMDYT420
    @IMDYT420 5 месяцев назад

    Doesn’t fix the stick drift on your right stick tho💀

  • @Balluh.
    @Balluh. 11 месяцев назад +1

    How long does this last?

  • @user-cp7lx5pk8l
    @user-cp7lx5pk8l 9 месяцев назад

    Mines won’t come off 😅

  • @skoti2002
    @skoti2002 27 дней назад

    This killed my controller

  • @Astrid6X
    @Astrid6X Год назад

    How do I take pictures🤔

  • @ntl57
    @ntl57 Год назад +1

    Never open that controller ! One year ago I open it and since that happen the controller fells apart more and more 😢 you can even see in this video that the case(front plate) is broken 😅

  • @masterspier3743
    @masterspier3743 Год назад

    Nice

  • @TheGodfather101
    @TheGodfather101 Год назад +3

    Use wd40.

  • @marcospalluto.
    @marcospalluto. 10 месяцев назад

    Can i use ethyl alcohol?

  • @user-gf8mc3ud4b
    @user-gf8mc3ud4b Год назад +1

    What about stick drift?

    • @ControllerRepair
      @ControllerRepair  Год назад +1

      For stick drift a similar trick will work, although on the elite 2 you have to unscrew the stick caps fully to access the joystick underneath, and even then, with drift it's much more likely to be an unfixable issue without going for a full replacement of the joystick, which in itself requires soldering and a fair bit of skill.

    • @masterspier3743
      @masterspier3743 Год назад

      @@ControllerRepairo

    • @user-gf8mc3ud4b
      @user-gf8mc3ud4b Год назад

      @@ControllerRepair I have the original Xbox one controller lol but is it same concept? I've gone through 4 controllers and hate having to dish out $60 everytime

    • @ControllerRepair
      @ControllerRepair  Год назад +1

      It would be similar though once the potentiometers have worn down, there is no other alternative. We do offer repair services of our own for basically any controller with an included 3 month warranty at controllerrepair.co.uk provided you are UK based as we currently don't ship abroad.

    • @tommygomes9845
      @tommygomes9845 Год назад

      After a year of use, my right bumper was acting up, and this fixed it for me 🙂. Thank you !