XBOX Elite Series 2 Bottom Shell Installation Guide - eXtremeRate
HTML-код
- Опубликовано: 25 июл 2024
- Now you can completely customize your Xbox Elite 2 controller!
Shop Links:
Amazon US: exr.gg/3N8p9Xx
Amazon CA: exr.gg/3NciMmn
Amazon MX: exr.gg/3uGzcwN
Amazon DE: exr.gg/47yNH4l
Amazon UK: exr.gg/47yNHBn
Amazon FR: exr.gg/47UbwUc
Amazon IT: exr.gg/47IOsIf
Amazon ES: exr.gg/47IWRLD
Amazon AU: exr.gg/47FVwoJ
Amazon JP: exr.gg/3Nel6ZR
eXtremeRate: exr.gg/3RqBSrl
Aliexpress: exr.gg/47HEO8G
eBay: exr.gg/47IWSiF
Walmart: exr.gg/3uKLg00 - Игры
Ordered the Bottom Shell and also a new frontplate from extremeRate for my Elite Series 2 Controller because the rubber is coming of on both of them. So I can't wait to have an Elite Series 2 WITHOUT the faulty rubbering from Microsoft! Thank you extremeRate for offering these parts so I do not have to throw away my expensive controller!
ordered and delivered in 1 week, perfect tutorial , my new controller looks beautiful, thanks guys youre doing great work.
Great to hear!
This video was a huge help. 👏👏 Wouldn't have been able to replace the bottom shell without it! Thank you! Look forward to modding the next controller w/ Xtreme Rate mods! 💓💓 Those T4 screws were the hardest to remove and install. So small and hard to screw it.
I love this look, it looks really clean. I wouldn't have thought of a wood grain back panel, that's kinda dope!
Outstanding detail. Helped me out in several places, thank you!
Thank you SO much! I did a full shell swap on my controller and didn't have an idea of where to start from!
Protip I found when replacing the shell on a 2nd controller... the free screwdrivers can be magnitised using the old magnets on the origional case :D save having to try and fiddle around putting those in
Great found! :D
Excellent instructional video, thanks. One addition I would suggest, is the mention of the plastic rings on the front shell. Not all new shells come with them installed and i nearly missed them. Easy to remove.
Apologies if they are mentioned and i missed it.
Thank you for this guide, I've managed to change the back plate on my controller thanks to this. The rubber on the official back piece is ridiculous and peeled away so quickly
do you have to put the magnets in if you do not use the charger??
Works great just got finished
Hi, I bought it and following your amazing tutorial step by step, everything perfect except for the magnets on the back of the controller, they wont stay glued to the back with your method. Any solutions?
I need this for the first elite controller pls
I orders this out it together and my paddles are loose and my trigger stops don’t stay. Any advice?
Do i take off the magnets from the old one to put on the new one bc there was no magnets is the package 2:52
can you power down controller to zero power or is turning it off regularly enough to start repair ?
Finally back shells to match the fronts !!!!!!
YES!
Hi! Love the feel of the product. Only thing I’ve encountered is the controller only works when it’s plugged in for some reason. Any thoughts on where I went wrong?
How do you dismantle trigger locks?
Do you make a clear black bottom shell to match the faceplate?
Where do you get the stuff to stick the magnets to the controller?? Seems like you had the perfect size. Cant fund them things anywhere...
Hope you found an answer, but if not. I was lucky enough to still have the sticky in place when I removed my magnets. Also, the cover has plastic guides and you don't really need the sticky. If you're not that lucky, some good quality double sided sticky and a scalpel will do it.
Great tutorial and love the look. Unfortunately after doing it all now the controller doesn’t work. It turns on but doesn’t control the Xbox. It still charges on the charger stand. If you plug it in with usb c it turns on but doesn’t let you control the Xbox.
Not gonna refund or anything I’m sure it was my mistake. But if you can think of a way to fix it it’d be great !
Have you tried to re assemble the controller again? Maybe you missed something. The video is pretty straightforward and the main mother board and the xyab buttons shouldn't be affected from the back panel installation, unless you accidentally disconnected something.
Try also looking at some other videos explaining how to disassemble the controller and put it back together.
Hope you'll fix it.
My magnet bars didn't have lines on em...how can I tell which is the weak side without it??
Mine had lines but one up and one down 😅 I'm still putting my controller back together and I'll hazard a guess it doesn't matter too much. They will make the back sticks more secure, I'm guessing.
These videos have an irritating way of making it look easy. Just removing the top and bottom plates could have been a tutorial video in itself. But I followed the instructions as closely as I could and I got there in the end. So now I have a nice new casing for my Elite controller that isn't bubbling and peeling off just a few weeks after its warranty expired. Thought I was going to have to buy a whole new one, so thanks. :)
I’m good on doing all this on a controller that it’s gonna last about two months before it gets stick drift, bumper issues, etc
The left paddles doesnt work anymore why is so?
well i have a torx 4 screwdriver and i cant for the life of me fit it to remove those devils lol nothing fits, i bet a torx 1 wouldnt remove them still hahaha
Does by any chance the halo infinite version have different screws?
Where i can buy thay doble side stickers for the magnets?
This may sound weird but you should also sell all other parts minus the back shell. Or each component individually. I would buy! I want to install an original shell.
The fact is the housing and buttons are complete
Classy. Lol love it.
Thank you!
Getting rid of that rubber grip is exactly what's needed. Changing the setup to the standard shell no rubber makes the elite 2 stronger.
T4 is too big. Anyone have a solution?
Just ordered the blue flame back and shell cover, since my original are cracked. Seems like the plastic of the original was cheap plastic.
The plastic is thin because of the rubber grip that peels off. Once the rubber grip comes off the integrity of the controller is lost.
@@kronicracer I've noticed that when I took apart the control. I saw all the cracks inside on the back and face shells of the original. The rubber grip kept it together from completely cracking.
Need the Dualsense Edge version of this please!
Do you mean the wood grant?
You need this in clear!
They provide several 'clear' shells, with a coloured tint to them
Yes Sir
Where can I get the magnets that hold the paddles?
In your old controller case? That's where mine are.
🔥
Edge controller 4 paddles wen?
I asked them on messenger and they said some time around 2024 but didn't give a specific date
2024
The magnets I ordered came crumbled :/
Please contact our customer service retail(at)extremerate.com
Do you have this for the series 1??
I just need the magnets...
We don't sell them alone...
@@ExtremeRate that may be worth considering in the future.
why is it AI voice generated?
We have lots of video but we can't talk too much...
What an odd question. Maybe he/she don't want their voice or couldn't decide on who to use. Or maybe they are shy 😂
No bottom grips. No thanks
out of date instructions, garbage shell from a garbage company. Go figure
The bottom shell does not just 'wiggle' off as shown. It takes a fair amount of force, and in doing so, you destroy the entire $200 product.
The T4 screw driver I was given is too big for the back paddle boards… 🫠
Same issue...
Same happened to me, I had to use a T3 screwdriver 😅
I thought that at first, but the trick is to apply greater force pushing down than is applied rotationally, which is a bit difficult with such tiny tools, and especially when unscrewing for the first time as they are so stiff.
I found what really helped was to wear a grippy glove, I used a gardening glove with rubber dots on the palm side, but a washing up glove would probably work just as well. That way you can firmly grip the tiny screwdriver and carefully apply the forces you need to. Hope that helps.