BUSHING TO BEARING SWAP FOR HUSQVARNA YTH22V46 LAWN TRACTOR
HTML-код
- Опубликовано: 17 апр 2021
- A short video for the guys and gals who own a HUSQVARNA LAWN TRACTOR. I found a neat Kit on AMAZON for doing a BUSHING TO BEARING SWAP FOR your Husky YTH22V46 lawn tractor and I just wanted to share it with all of you. Thanks for watching, please LIKE and SUBSCRIBE if you like the video. I'm in the Amazon affiliate program and receive compensation when you make a purchase through one of my links. It adds nothing to the cost of this product, I just receive a small commission which helps my channel. Thank you for watching.
WHEEL BEARING KIT -LAWN TRACTOR-HD SWITCH:
www.amazon.com/gp/product/B07..."
LINKS to my DIFFUSER KITS
EASTWOOD Diffuser Kit: www.ebay.com/itm/125686625341
HARBOR FREIGHT Diffuser/Mixing Tube Combo Kit: www.ebay.com/itm/125002819173
HARBOR FREIGHT Diffuser Kit: www.ebay.com/itm/124837009589
HARBOR FREIGHT Mixing Tube only: www.ebay.com/itm/124960721797
FAN NOZZLE-HF1 for Harbor Freight: www.ebay.com/itm/125161692424
FAN NOZZLE-E1 for Eastwood: www.ebay.com/itm/125161727758
VEVOR 22L LINK: "www.amazon.com/VEVOR-Ultrason..."
CREWORKS ULTRASONIC CLEANER:
www.amazon.com/CO-Z-Ultrasoni..." 
Авто/Мото
Use the old bushing as a bearing driver. Remove the seal of the bearing first. You might be surprised at what little grease is in there. Add more high temp bearing grease. Done.
Thanks, good to know!
Great video man, already ordered had to have them after your video!
Thanks man. You'll luv'em and thank you for watching.
Really great video and most helpful. However, I was able to replace the new bearing kit without taking the tire off. Less time and effort with tire on.
Great! Good to hear that! Thank you for watching my channel.
This is great. Got tired of bearing going bad. And I highly recommend using this kit.
Good!
Thank you
You're welcome! Thanks for watching.
You can use a socket that's big enough to fit around the edge of your bearing. It'll help when tapping it in place.
Thanks!
A 1 1/16" socket works perfectly.
I blast
Those out all the time with the tire on !
I utilize a 3/8" ratchet extension for punch and a 3# hammer .
EZ PZ
John Deere is the same way- front wheel bushings.
After researching the topic I am going to replace my bushings with more bushings. My spindles are trash and need replaced. My left front is the worst of the two. I ordered a replacement kit on amazon that has both spindles and 4 new bushings with new clips and washers and wheel caps( all made in the USA).
These front lawn tractor wheels take a real beating going around the yard and I neglected to grease on a regular basis.
The reason I am not going with a ball bearing kit is because I saw a couple of videos where the ball bearings disintegrated due to the heavy beating load the front wheels take on these tractors. The bearing races cant take the excessive force and the balls come out of the bearings. I could be wrong but I believe this is the engineering behind the bushings in the first place-- instead of using ball bearings for this application. Also very low speed metal on metal, if greased will last( I guess). Mine are 17 years old at 475 hours of use mowing 0.75 acre yard.
After over a year with bearings on my Husqvarna I'll never go back to bushings. I use my tractor every day and yes the front end takes a lot of stress but I have had no issues. Best of luck to you and thanks for the input.
@@CycleFab ONE YEAR IS NOTHING. How about 5-10 years of
punishment? That's whom I want to hear from.
Great video. Thanks for sharing.
I have a Husqvarna YTH-20K46. How do I determine which set of replacement bearings will work for my mower?
Thanks in advance.
All the Husqvarna are the same, just get the ones that I show in the video and they'll work.
@@CycleFab thank you very much. I'm looking forward to watching all of your videos.
Keep up the good work.
I have husquvarna model #YTH22V46XLS and these bearings were too small and didn’t fit on the spindle.
Will I need to grease the spindle and bearings with this upgrade kit?
It's always a good idea to grease the spindles when ever you introduce a new bearing. These bearings appear to be sealed juging by the way they are designed and feel. Thanks for watching!
Got the bearing into the wheel but it won't go onto the axel, any tips, tricks, or advice?
Sometimes burrs will be on your axles because of wear with the original bushings. You'll have to knock those burrs off with a file or abrasive cloth.
Let the air out of the tire
Now that is some good, straight forward thinking advice!
My 3 acres are FULL of potholes, and slamming into them continually
destroys the bushings. Will ball bearings fare any better?
I want to hear from someone who changed them out 5 years ago,
and are glad they did. Not criticizing, just want to know LONG TERM
results.
Mine are still holding up just fine.
I've replaced mine on my murray . What a difference. The only thing I had to do was hone out the washers to fit the bearing.
If you fill the wheel with grease after you are finished the job, the new bearing can never dry out and they will last longer than the mower.
Hello, we have a lawn mower bearing kit, can you help make a video?
Yes, please contact me at: cycle4fab@gmail.com
10-21 Currently unavailable on Amazon with a notice "We don't know when or if this item will be back in stock. "
Yep, big time supply problem right now.
Put your bearings in the freezer for a few hours and they'll drop right in.
Good advice, thanks!
@@CycleFab heat the spindles with a heat gun
Really this isn’t rocket science folks. If you have any basic tools and some mechanical skills, it’s easy and a good hack. BTW I use a large socket to tap the bearings in. Works great. Another good upgrade is the poor-man’s power steering kit. Google it. You’re welcome y’all.
Great for the info! Thanks for watching and sharing.
Have a yth24v54
Cool!
ANY PROBLEMS SINCE THE CONVERSION?
Not a single negative issue with this product. And I have been using this lawn tractor almost every day since the install. Thanks for watching and commenting.