I've just about watched all your Cars and Trucks, Upgrades and Unboxing. Next is to move to the Air RC videos. Thank you for the videos and your time. You are doing a PERFECT job with your channel.
Your set up 😍. I've just bought the FTX Kanyon, I can't wait for it to arrive and start modding it and a winch is exactly why I'm watching this video. Thank you
You are my absolute favorite R/C blogger, builder, and RUclips channel! You are a great speaker, you are clear and concise, and you do your due diligence! Well done! Looking forward to more awesome build vids! I have learned a ton from you! 😎
This is awesome! Thanks for putting this video together. I asked my local Hobby Store about doing this and they said it wasn't possible. I am going to try it tonight. I have the same components too!
Love the show and it's very helpful that you don't hide your mistakes, they're almost as important as your accomplishments.. and sometimes make for a great blooper reel which I rarely see from any RC shows except yours. Keep up the great work 😁
I found one of your videos and that’s all it toke me to spend $1,000 in 1 hour to just build my RTR XJ SCXii performance and scale for axial fest next year hahah!!
I'm new to all of this so watching you, take your time,explaining & enjoy what you're doing is very helpful. Hope to be as good as you some day!! 😊😊 Have a great time..
Thank you so much for the winch install tips and the step by step wired winch control unit controller instructions. I really appreciate the demo of the transmitter settings. I have the same Spektrum Dx5 Rugged transmitter. I was so happy to see it work. You rock RC Girl!
I don't have the dx5 controller but I'm going to follow what you did for assigning a channel to my winch and hopefully it'll work the same on my controller! Thank you so much for doing this video! Wish me luck! Lol.
You can buy a dumborc transmitter or any transmitter with a three position switch and you just plug it into the channel the switch is. It should work 100% but you got to use to it seeing that it is harder to use the switch and put it in the middle being the neutral and left from neutral position is to pull in the line and far right position is to let line out. But dumborc transmitter works good and good quality 6 channel under 40 bucks on amazon.
Hello RC girl, I have a question What receiver did you use when you were assigning your winch? I'm using the srs6000. I'm having trouble getting the assigned switch to work with aux 2. It's as if it process doesn't save. I've watched your video a few times along with my owners manual. Any help will be greatly appreciated. John
I love rc but just spent 900$ on a scx10iii well 540$ but plus extra 900$ and it already needs a gear or something replaced and I haven’t even left 50% throttle nor have I even left the house with it, the only thing it’s done is flex on shoes and it already has a small clicking sound like it’s missing a tooth or something is wearing out very quickly I mean not even 30 min run time. But I love them, glad there’s hobby shops that can just figure out what the issue is and fix it, I don’t like digging into transmissions and trying to find the problem
Hi RC Girl, if you ever make it to Summit Colorado please come check out the crawler courses we just added the coolest winch course. Winch (lol ) I am sure you would have a blast with your scx 10 2. Great job !!! super impressed with your installation skills.
Nice and simple tutorial, one question if I may, is the voltage strong enough in the receiver to pull the vehicle out ? I know the winch is meant to be used in assistance with the main vehicle running gear, but I was wondering if you had any problems with it as I'm gonna put it in a fairly heavy rig
I designed a much bigger receiver box (to be 3D printed) for SCX 10.2 which will hold all the extra wires and the winch controller with no problem. Drop me a line if you want more details!
Love your videos, especially this scx10 and your TRX4 upgrade series, but I was wondering if you know the name of the plug that the winch uses. I'm looking for a specific wire extension and I have no idea what the names are for each plug.
You just found Matt’s off road recovery?! He’s one of my favorites but you should also check out bleepinjeep and Litebrite has some great jeep content. I love your XJ build good job!!
I have a lot of Rc's of all types but I sold all of my crawlers years ago, however your series of videos on this jeep has given me the itch to jump back into one. I just have to decide which kit to go with. Suggestions??? Anyone?.....thanks for the awesome videos Rcgirl.
Soo many great options out there. Axial is releasing a new kit this week, might be worth waiting for. Element Enduro kit looks good. Trx-4 (regular or sport) are always good choices. Or you can go the 2.2 route..
Nice addition to the Cherokee am I wrong in saying that I think RC four-wheel-drive makes other plates to accommodate where you might want to attach the winch.? But your method is going to work just as well nice mod Haley way to show us what needs to be done. Appreciate your time and your skills as always.
Hi kk beautiful, i am very happy with your video .. I really have an RC car like you kk .. but in Indonesia, it's very difficult to get a car like that ... because my salary is below the RC price.
I take it that you can't mount metal bumpers the same way as plastic ones because you could adjust it forward otherwise and secondly I didn't know spectrum made car transmitters. I swear by spectrum I use a DX 8 on my hellys and planes are they still available thank you for posting your vids are very informing. Cheers!
Would you happen to know if this winch will fit Integy bumpers for the 2.2 Axial Wraith? I've finally got my Wraith where I want it even though I don't know who's upset more about that, my wife or my bank account. But I'm wanting to add a winch and new bumper as sort of a finishing touch.
I have a winch as well. Trying to run it off Channel 3, but 2-pin JST plug is not working with the switch. Likely need this controller at add onto mine. It takes power and signal to make a 3-position profile.
Excellent gear!! Looking for something a bit more powerful though... probably asking too much, but a winch that can pull an rc tank? 15-20 pounds... for a recovery vehicle. Was looking into rc cranes but that got expensive lickity split! Great vids, good work arounds!! It never does go 100% the way we thought it would, but we learned stuff & stuff!!
Great video but i need your help.. I buy the hobyteck 6x6 crx18 rc crawler the electrinics is the same with power wagon fms fcx18 .. i buy only the winch not the board or the wires. I Want to install that winch on the receiver board in position 3 channel which has a 3 pin socket, how can I do this?
Looking at the winch from the front, there is a small silver "L" shaped tab on the top/right side. Does that do anything when you turn it either way? On the real life sized one, I believe that is the free spool lever that allows the cable to be pulled out easily/quickly. I wonder if the RC version included that option.
That is one of the best how to RC videos I've ever seen. Well Done!
I've just about watched all your Cars and Trucks, Upgrades and Unboxing. Next is to move to the Air RC videos. Thank you for the videos and your time. You are doing a PERFECT job with your channel.
Your set up 😍. I've just bought the FTX Kanyon, I can't wait for it to arrive and start modding it and a winch is exactly why I'm watching this video. Thank you
You are my absolute favorite R/C blogger, builder, and RUclips channel! You are a great speaker, you are clear and concise, and you do your due diligence! Well done! Looking forward to more awesome build vids! I have learned a ton from you! 😎
Thanks for the kind words!! 😃
This is awesome! Thanks for putting this video together. I asked my local Hobby Store about doing this and they said it wasn't possible. I am going to try it tonight. I have the same components too!
Love the show and it's very helpful that you don't hide your mistakes, they're almost as important as your accomplishments.. and sometimes make for a great blooper reel which I rarely see from any RC shows except yours. Keep up the great work 😁
I found one of your videos and that’s all it toke me to spend $1,000 in 1 hour to just build my RTR XJ SCXii performance and scale for axial fest next year hahah!!
I'm new to all of this so watching you, take your time,explaining & enjoy what you're doing is very helpful. Hope to be as good as you some day!!
😊😊 Have a great time..
She turned out to be a real head turner, Nice job. Have fun at Axialfest!
Nice rig, can't wait to see your videos from Axialfest.
I’m new to this hobby, all your videos are so helpful 👍 thanks
Thank you so much for the winch install tips and the step by step wired winch control unit controller instructions. I really appreciate the demo of the transmitter settings. I have the same Spektrum Dx5 Rugged transmitter. I was so happy to see it work. You rock RC Girl!
once again just amazing i love how you are so simple but enough info that its not confusing
First time watching your vids !! Awesome job! And wicked i watch Matt's recovery all the time!!! Another awesome tuber
Another great video! Have fun with your new winch, they are a blast to have on a rig!
Ahh thank you so much, I have had the same winch on my tf2 but haven’t ever plugged it in, this is an awesome little trick.
Thank you RC Girl, this video helped my set up my rc4wd wired winch.
Are there others like You in the real world???? ,) keep up the great videos. God bless
So amazing how passionate you are with all this. !!!!
Thank you so much I've been trying to figure out how to use it without the external remote.
Hey "Cutie Pie" (as seen on your controller). Love your videos. Have fun at AxialFest.
Great video. Have a great time at Axialfest 👍👍👍👍👍👍
I just put one of those on my trx4 and it works great, I hope you have a great time at axial fest.
you are very good at explaining what you do and you know a lot, I congratulate you
Very helpful video. I just used it to setup my winch on my Jeep Gladiator/DX5 Rugged. Thanks.
i cant wait to get my first crawler. thanks for all the tips! i think my favorite thing about the hobby is that scale look! so cool
Right on Haley! Definitely put'n this on the list! Good luck at the fest!
I don't have the dx5 controller but I'm going to follow what you did for assigning a channel to my winch and hopefully it'll work the same on my controller! Thank you so much for doing this video! Wish me luck! Lol.
Let me know how it goes!
You can buy a dumborc transmitter or any transmitter with a three position switch and you just plug it into the channel the switch is. It should work 100% but you got to use to it seeing that it is harder to use the switch and put it in the middle being the neutral and left from neutral position is to pull in the line and far right position is to let line out. But dumborc transmitter works good and good quality 6 channel under 40 bucks on amazon.
I have seen so many shade tree videos on this but your video is so good and you do such good work.big fan girl im subbing now.
Thanks for the tutorial it was really helpful👍
What u have is what I have.. just that I'm doing it on my trx4.. following ur vid is like following printed instructions. Nice!
Very helpful video. I have the same DX5 Rugged tx and want to put the same winch on my new SCXIII Gladiator....I'm all set now. Thanks.
NICE Rig, Hayley!! 👍👍
You've really built that up right. That thing's going to Rock at Axialfest!!!
Carmine ✈🚂🚙
Wow your rig looks awesome!! 👍👍
I love the headlights!
Solid install video
Yeah got to have a winch. I put a cheap integy on my redcat Everest gen 7 just a switch on top but hay it helps.
Bought that winch for the Defender but no instructions. I think you soled all my problems except programming by transmitter
Looks awesome, keep it up!
Hello RC girl, I have a question
What receiver did you use when you were assigning your winch?
I'm using the srs6000.
I'm having trouble getting the assigned switch to work with aux 2.
It's as if it process doesn't save. I've watched your video a few times along with my owners manual.
Any help will be greatly appreciated.
John
Awesome installation video
great looking xj!
Your awesome dig your channel.🤘😎 like the way you get to the point 👍
Nicely Done Video and Instructional for the Warren Winch ✌️😎👍 HFLPRCing
Looking good 👍, have a Blast!!
Ottimo lavoro !!! ...e molto funzionale !!! ...devo acquistare subito anche io !!!....che voce calda !!...ciao bellissima !!!
Have a great time at Axialfest!
I love rc but just spent 900$ on a scx10iii well 540$ but plus extra 900$ and it already needs a gear or something replaced and I haven’t even left 50% throttle nor have I even left the house with it, the only thing it’s done is flex on shoes and it already has a small clicking sound like it’s missing a tooth or something is wearing out very quickly I mean not even 30 min run time. But I love them, glad there’s hobby shops that can just figure out what the issue is and fix it, I don’t like digging into transmissions and trying to find the problem
Watching your video and driving at the same time see you there
Well done, hope you have a great time at axialfest. Wish I could go to one of the major events but they don't look like they are handicap friendly.
Why don't you ask them and find out?
Hi RC Girl, if you ever make it to Summit Colorado please come check out the crawler courses we just added the coolest winch course. Winch (lol ) I am sure you would have a blast with your scx 10 2. Great job !!! super impressed with your installation skills.
I wanna get me this winch, good stuff
STEVO D 313 Did you ever get this winch and how did you fix it to your rc bumper..?
Will this work on a enduro trailwalker?
Nice and simple tutorial, one question if I may, is the voltage strong enough in the receiver to pull the vehicle out ?
I know the winch is meant to be used in assistance with the main vehicle running gear, but I was wondering if you had any problems with it as I'm gonna put it in a fairly heavy rig
Super clean, love it :)
I designed a much bigger receiver box (to be 3D printed) for SCX 10.2 which will hold all the extra wires and the winch controller with no problem. Drop me a line if you want more details!
This channel is fantastic. New sub here!! 🎆🎆🎆👌🏻
Love your videos, especially this scx10 and your TRX4 upgrade series, but I was wondering if you know the name of the plug that the winch uses. I'm looking for a specific wire extension and I have no idea what the names are for each plug.
Hey great video! What tyres are those?
Great upgrade,thanks for sharing
True gamers: Have pokimane
True engineer like us: Have rc girl
We need fight between pokimane and rc girl
Sick rick love your videos
Can you make a scx10 ultra 4 rig
You just found Matt’s off road recovery?! He’s one of my favorites but you should also check out bleepinjeep and Litebrite has some great jeep content. I love your XJ build good job!!
Nice video, have fun at axialfest
Beautiful video, jeep and wuman)
Love the video!!!
What about using the hawse fairlead instead of the roller one? Love your videos!
Very nice rig👍👍..would you recommend a DX5 rugged?
I have a lot of Rc's of all types but I sold all of my crawlers years ago, however your series of videos on this jeep has given me the itch to jump back into one. I just have to decide which kit to go with. Suggestions??? Anyone?.....thanks for the awesome videos Rcgirl.
Soo many great options out there. Axial is releasing a new kit this week, might be worth waiting for. Element Enduro kit looks good. Trx-4 (regular or sport) are always good choices. Or you can go the 2.2 route..
another fine video thanks
Ever think about mixing winch and throttle ? That way the winch and tire speed match.?..
Thanks for sharing 👊
Are you using a 3 cell lipo with your winch? Did you have to wire in a BEC?
Nice winch
Thank you for the video
i have the one with the seperate controler . on my next build i think ill go with this version
Nice addition to the Cherokee am I wrong in saying that I think RC four-wheel-drive makes other plates to accommodate where you might want to attach the winch.? But your method is going to work just as well nice mod Haley way to show us what needs to be done. Appreciate your time and your skills as always.
Good point, they might! I'll have to check
Im using additional esc to control the winch.
What led front light are you using?
What voltage and current does the winch use? is there enough power in every RX to cope with that power.
Hi kk beautiful, i am very happy with your video
.. I really have an RC car like you kk ..
but in Indonesia, it's very difficult to get a car like that ...
because my salary is below the RC price.
Great video. Have fun at axial fest. Could you slide the bumper forward?
Yeah but then there will be a gap between the bumper and the grill
@@RCGirl didn't think about that.
I take it that you can't mount metal bumpers the same way as plastic ones because you could adjust it forward otherwise and secondly I didn't know spectrum made car transmitters. I swear by spectrum I use a DX 8 on my hellys and planes are they still available thank you for posting your vids are very informing. Cheers!
Would you happen to know if this winch will fit Integy bumpers for the 2.2 Axial Wraith? I've finally got my Wraith where I want it even though I don't know who's upset more about that, my wife or my bank account. But I'm wanting to add a winch and new bumper as sort of a finishing touch.
I have a winch as well. Trying to run it off Channel 3, but 2-pin JST plug is not working with the switch. Likely need this controller at add onto mine. It takes power and signal to make a 3-position profile.
Excellent gear!! Looking for something a bit more powerful though... probably asking too much, but a winch that can pull an rc tank? 15-20 pounds... for a recovery vehicle. Was looking into rc cranes but that got expensive lickity split!
Great vids, good work arounds!! It never does go 100% the way we thought it would, but we learned stuff & stuff!!
Amazing great vid worked out nice
Can you show your whole rc collections?
good vid
Great video but i need your help.. I buy the hobyteck 6x6 crx18 rc crawler the electrinics is the same with power wagon fms fcx18 .. i buy only the winch not the board or the wires. I Want to install that winch on the receiver board in position 3 channel which has a 3 pin socket, how can I do this?
Very good hayley that will fit onto my dog lead that rig can take him for a walk.😊👍🐶
😂😂
🐶
Is this winch controller pulling 6v from RX or 11.1v from a 3s lipo?
Looking at the winch from the front, there is a small silver "L" shaped tab on the top/right side. Does that do anything when you turn it either way? On the real life sized one, I believe that is the free spool lever that allows the cable to be pulled out easily/quickly. I wonder if the RC version included that option.
That is just cosmetic
Nice job!
Want to do the same winch on my TRX4. Not sure if my radio will has a spare channel yet... we'll figure it out.
hello congratulations on your channel, I have a question I have a futaba transmitter with 4 channels you think I worked on an axial scx10 ii
I'm not sure what futaba model you have, but if you have a spare channel available on it, it should work??
Hello do the winch work with the 3s lipo ? Thanks in advance
Is it one press line out, then one press back in?
PLLLEASE MERRY ME YOU ARE PERRRRRRFECTION
Looking forward to 👊....👍 NC ❤
You from NC?
Can you tell me if I can power the wireless controller off of the spare jst connector that is connected to the factory esc in my TRX4? Thanks.
Does it have three wires? You'll need a signal wire in addition to power