The Quest For 70mph Sonicwake V2, Blackjack 42 - Fast Electric RC Boat Setup
HTML-код
- Опубликовано: 10 авг 2022
- The Quest For 70mph Sonicwake V2, Blackjack 42 - Fast Electric RC Boat Setup
FLOPACK CAP PACKS
flopackrc.com/
DEAD AHEAD RC Boats
web: www.deadaheadrc.com
BLACKJACK 42
HORIZON HARBOR TUG BOAT
VELES 29
www.avantlink.com/click.php?t...
DYNIMITE GPS
www.avantlink.com/click.php?t...
SPEKTRUM 4S 5000 100C G2
www.avantlink.com/click.php?t... Water At The Speed Run Spot Blackjack 42, Veles 29, Horizon Harbor Recovery Boat
SPEKTRUM 4S 5000 100C G2
www.avantlink.com/click.php?t...
Thanks for watching ironclad rc tinker test and tune everything rc
Personal contact information ironcladedout@gmail.com
I don’t think anyone’s tired of seeing speed runs, I do the same thing every time I go! To the water!
True, mate.
Congrats on the PB - 72 is extremely impressive with 6S! Watching you push these boats to the limit is awesome and it never gets old, but it's your personality that makes your channel so great Big B. You can run sail boats and I would still find your content entertaining. Peace brotha!
Epic day on the water for sure. Thanks brother
Hallo. Ironclad. RC. This Sonic Wake. Pro .v 2. I'm going to buy,on . PS,is I alright A's it comes. In box . But the New SR 80 pro. I no , that sonic weak v 2 is ,a lot better than sr80 pro. Jo go on , with the show. Ironclad rc.
She's running nice and stable. You are getting the same speeds I am with the tabs and 50 1.6 prop. Now it's time for the fine tuning. Thanks for sharing with all of us out there. I know you have saved me a lot of guessing, trial and error. Know that your channel is appreciated and entertaining.
Knowing how you like to push things to the limit, I would recommend running the new cap pack in parallel with the existing cap pack (or just replace the existing cap pack). My reasoning for this is adding more connectors to your power transmission wires just adds that much more resistance where you don't want or need it.
Thanks for the information doc. All input is helpful
Congratulations. 72 is impressive, can wait to see the results of the cap pack. Thanks for helping us out. Much appreciated
Just installed the bullets on the 42. Now I've gotta do it to the v2. Can't wait to test her out
Go ahead big b!!!! 71 is moving! I'm still on the hunt for 70 with my 42. 66 is my best so far. Boat gang!
72 mph way to go brother !!!! I love the speed runs , hell I love all of it and you have helped me out with my boats and I am great ful for all the teaching, bg4l!!!!
Thanks brother. BOAT GANG FOR LIFE
Congrats on the PB. 72mph on 6s very respectable. Thank's for Sharing Big B 👊💥👍💯✌
Thanks brother. BOAT GANG 👊
Congrats man seeing the BJ42 flying at 71!! And the SWV2 at 72…and YES all on 6S. The cap pack mod is going to be epic!!! Cant wait to see how/ what you do!
I appreciate the video and that you are trying to help out us that don't know as much. I just purchased my first true hobby grade boat and I'm excited to learn what I can do to it.
Welcome to the boat gang 😆
Awesome job brother! Love the new pb on the sonic wake. I’m chasing that number. I had ordered the OSE raider 150 but it was a bad esc. So I threw in a Spektrum Firma 160 esc that I’ll test today so hopefully all goes well.
Great info, very helpful.
Glad to hear it! BG4L
Congratulations 🎉
Nice job bud! 👏
cool video brother,im one that likes your slo mo work,keep the videos coming,ive ben in the hobby for a long time and your videos are never boring,
Thanks brother. BUILD YOUR BOATS IRONCLAD
Holy shit! Congrats Big B On the 6s 72mph swv2!! I feel like thats best in its class brother! I wanted to add a tip to make your life easier, I flipped the velcro straps around in the v2 so I can strap the 6s battery in, but easier access to release them. Might help save you some time. It's kinda hard to weave them back the other direction but it's worth it! Boat gang baby!!
Thanks I've. Even running my straps in that configuration for quite so.e time, i love it. Thanks
Nice runs BigB
Your speed run spot is perfect
Thank you very much.
Nice 👍
Thanks big b bad ass
Hallo Ironclad Rc. I really like your videos,it is so cool brother 😎. Not other i No off. Show us, that much. I my self,i lern everytime. Thanks 👍. Her for Danmark.mvh Rene' Pedersen.🎉😮
No problem, brother. glad I can help. BG4L
Dang son, 6s beast mode
Lookin good 😊 👍 big b ☝️
Classic IRONCLAD RC video!!! and great commentary. All I can say is sharpen that rudder to ginseng knife blade and nickname that boat “The Chum Maker” 🤣
Well I can say more… that spin out was cool and even better in slow motion, happened because your 42 BJ is a straight line monster. Big B you certainly have a way with gleaning mph out of lower cell counts, bet my paycheck you could get it over 100mph. keep it up! BG4L.
I love it. Filet o fish at 70 knots lol.
Clad ... That was an awesome 360 on the water definitely some smoke on the water very cool slow-mo keep it up sound not a problem complainers must be whiners.... They got to remember it's a RUclips video not at THX movie at the theater.... In the words of Joey Biden....CA MON MAN
Great video Big B. I get 53 mph, 4s 5000mah 100c with octura x442 prop. Raider 150A.
But runs cooler, and I like that.
Yes sir, the 642 is an awesome prop for the sonicwakes. I received the package thank you very much.
Can’t believe I’m just finding your channel bro boats are my second passion lol & damn you really got some clean runs in hands down! I built a dumas airboat like 30yrs ago & I barely ever run it but I really want to start a hydroplane or tunnel hull I know there’s kits out there for the hydroplane’s & tons of vids so should start there idk 🤷♂️ any suggestions how did you make the smaller boats early on in the vid I’ll checkout your page & see from there👍great vid!!
Welcome to the boat gang! Glad to have you aboard
Like the sounds slow mo
Thanks
Nice job B! What Im seeing is 2 out of the 3 boats there hit 70. "Twisted Tug hits 70!" has a nice ring to it lmao
That would be epic. It's Like seeing a scx10 do 50mph. Lol.
Congrats man seeing the BJ42 flying at 71!! And the SWV2 at 72…and YES all on 6S. The cap pack mod is going to be epic!!! Cant wait to see how / what you do! from what ive done on the drone builds…trying to get the cap pack connection as close to where the wires join the ESC will be best.
Big thanks to you, man the trim tabs are definitely a game changer. Thanks brother
You are so welcome mate!! So glad to be a part of the BG journey!😉
You could chop up some of that carbon fiber Kevlar weave or even just the carbon and a tiny little bits added to your chop strand for extra stability and support
Oh yea that's a perfect idea. Thanks again Josh. You tha man
Keep the caps , and add your flow pack 😎 I’m no pro but I think that’s a good idea 👍
Yea man I'm gonna definitely keep the stock external pack on the v2 150 raider
I like the slow mo if you got complaints tell them to make their own damn videos
Get ya some BigB
Love your videos! Question: can you run 8S batteries in a stock Sonicwake? I heard it would burn up your esc or motor.
You need to upgrade the esc to the 160 spectrum firma in order to run 8s.. 8s in the v2 sonic wake its basically for speed runs with the stock 2000kv motor, short pass check speed then do it again type deal. If you run 8s doing ovals the prop size needs to be small so it doesn't over heat the motor.. check Temps regularly
Big B I love your channel and boy I can't wait for the new castle hydra xlx2 but what do you think about making the bj42 a twin setup or I got tp cm4070 2900kv out of my arrma limitless but with that super high kv what prop should I try. I also have a castle 1717 1650kv or castle 2028 1100kv for either the bj42 or sonicwake v2 I just have those motors sitting around and I'm definitely ordering that ose 150esc for the sonicwake and I just got a 50mm 1.6 three blade and love it
I've given the twin a thought since I bought the boat. I think I'm gonna keep her single motor. There's plenty of room for twins that's foe sho
Took a good look at the V2 today. The left trim tab was around 1/4" lower then the right side. Used a ruler to level it out. Boats going straight as an arrow . Left turn is great now. made a few speed runs wondering if you could take a look at my ESC
That's great to hear brother. Glad you got it worked out. Email me ironcladedout@gmail.com maybe I can help?
Got the new castle marine ESC on preorder at amain for my sonic wake v2
Me too can't wait
Dude you're doing great I watch all your videos it's a shame I have five nice boats out in my garage I live in California a bummer going to be moving what state are you in maybe moving to Austin Texas should be plenty of lakes out that way.... But a real bummer to do absolutely anything in California....
I'm in Jacksonville nc. Good luck with your relocation thanks for watching
Hi big B,what kind of cooling line did you use for the Blackjack42 is it silicone and what size and where did you get it?
Xl 4mm id x 8mm od. zippkits.com or Offshoreelectrics.com
Big B did you adjust the trim tabs when boat was stock?mines not turning left very well
It's the turn fin length if the rudder were longer like the v1 rudder you could make a better left turn. The rudder comes out the water in a left turn reducing steering. Mine does it too
Want to know esc motor option you think is best for highest speed on 6s?
Having electrical issue now. I thought I'd replace esc first. Hopefully, it's not motor 😢
Maybe a 1500kv 4070 tppower
Nice runs man, did you bother blue printing the the Sonicwake hull or leave it stock.
Stock
Do you mount your GPS units with just Velcro in your boats?
Yes sir, it works pretty good.
Im about to buy a Sonicwake v2, do you have any basic setup tips for the V2 out of the box for a bashing/fun boat? It will be out on a lake with some smaller waves at times. Trim tab, turn fins, prop shaft, rudder geometry changes to the out of the box setup? I'm not going for top speed but rather more runtime, (hopefully 8 minutes or so?). Hoping for something reliable that will give me more runtime than stock. I was thinking a less aggressive pitch prop, maybe a 4516 or so. What's the largest 6s battery you'd recommend without destroying the handling?
Out the box I'd go up on both trim tabs about 2 full turns. I had to pull the trim tab off the boat and slightly bend the tab up so the set screw contacts the tab I'm it's up position, other than that start with your cog forward, if it doesn't blow over move cog back a little bit.
@@IRONCLADRC how about largest battery recommendations and increasing runtime?
9500 mah but I'd stick in the 6500-7600mah range lighter weight and more agile
Which prop.on the 42?? That thing flies
1816 abc
What do you think about them cnhl batteries?
I like them, there great for speed runs, not to great for ovals or bashing but perfect for speed runs
Can you mount two motors/props?
It would be very involved but I suppose so.
What esc are you using in the Sonicwake? Mine burned up.
Ose raider 150a
@@IRONCLADRC Thank you.
Love RC boats but unless you have a large V hull and are jumping wakes from real boats under power, they are pretty much boring just going back and forth waiting for it to flip.
24" Pro Boat Wire melted I have the same set up as you do separate water lines to ESC & Motor
changed the water line pickup with a deeper line with the Rutter almost even
Any more suggestions ????
Trying to keep this Motor cool
Raise your strut.... Run the boat once check GPS let cool. Few minutes then hit it again. I told everyone it's a hot set up.
@@IRONCLADRC thank you
hello sir..what model remote you use
I very been using a dx5 rugged & I love it
What body of water are you running in
New river, but I'm up stream in the north east creek
Will a Spektrum 4685 4 pole Brushless Marine Motor 1350Kv fit in sonic wake 36 v2
With major modifications it might fit?
What motor would you recommend to to to run 8s or more on my sonic wake 36 v2
I personally would add bullets to the main leads...those little wires are most likely soldered to the board with the main leads...that 16g wire would act as a bottleneck for what you want caps for
Thanks for confirming my thoughts I most definitely appreciate the input.
@@IRONCLADRC yessir!!!! I may be newer to boats but been around rc and hi power electric setups for quite a while
hey man! I love your channel! I'm a disabled Vet and recently I have gotten into Rc everything and I've 3D printed a speed boat. I got a 4074 2000kv motor with a 150A water-cooled esc. I need help finishing this up. I want to fiberglass the entire boat bc by itself will not handle what I'm going to do to it. I need help from you so I can be successful.
I'd use epoxy, it's much easier to work with
@IRONCLADRC yes I got epoxy and fiber glass I need a good motor mount. Which one should I get for a 4075
@Mya-2022 you'll need to do the measurements, here's a good selection from OSE
www.offshoreelectrics.com/products.php?cat=Motor+Mounts&PARTNER=ironclad
@@IRONCLADRC sorry I just saw your messages. I have come to find just using epoxy is much easier but it is gonna look cool!! I'm persistent and I wont give up until its done right. Thank you for spending so much time teaching us what to do and saving us tons of countless hours!! I appreciate you
Not sure but I'm thinking two packs is better then one.
I agree 👍
Maybe to much resistance ??? Idk 😣
You thunk I can get my M41 to hit 70?
DON'T TOUCH IT...!!!👍👍😵😵😎😎⚓⚓
👊
See videos of Atomic barb wier
I'd go for 100mph
That I did, hit 106mph with the 42, video in the playlist
@@IRONCLADRCwow that is super fast for a rc boat I probably could even steer it
a...not at
72mph.....Hi5
👊
Ha Big B what is the e-mail so I can send you something okay
ironcladedout@gmail.com