Improving the Handling of our VW Amarok!
HTML-код
- Опубликовано: 4 апр 2021
- One of the major downfalls of the VW Amarok is the lack of feedback though the steering, especially once lifted.
To improve this, we fitted SuperPro's full range of polyurethane bushes throughout the truck, along with new "camber adjusting" top arms that didn't work as we intended!
SuperPro Amarok Bushes
www.darksidedevelopments.co.u...
Full Amarok Specs - • We bought our own V6 A...
-----------------------------------------------------------------------------------------
Camera Gear at the bottom. Scroll Down.
Check out our full video archive: drksi.de/videos
Please don't forget to subscribe to our RUclips Channel: drksi.de/YTSubscribe
Visit our website for more of what we do at www.darksidedevelopments.co.uk
We offer Bespoke Tuning Products, Custom ECU Mapping, Diagnostics, Servicing, Repairs as well as a wide range of New & Used Genuine and OEM quality parts.
One of our main aims is to provide products that give the best performance gains, whilst still maintaining the reliability and economy associated with a diesel engine. As we only own and work with TDIs, you can be assured that you are dealing with experts who have an in depth knowledge and understanding of all things VW and BMW Diesel.
Follow us here:
LIKE us on Facebook: drksi.de/fb
FOLLOW us on Twitter: drksi.de/twitter
FOLLOW us on Instagram: drksi.de/insta
FOLLOW us on Flickr: drksi.de/flickr
+1 us on Google+: plus.google.com/+DarksideDeve...
See our online blog for guides, event coverage, advice and more: drksi.de/blog
-----------------------------------------------------------------------------------------
Camera Gear:
Sony A7iii
Samyang 24mm f2.8 (Vlog Lens)
Samyang 35mm f1.4
Tamron 28-75mm f2.8
Rode Wireless Go Microphones
Rode Lavalier Microphone
DJI Mavic Mini Drone
DJI Ronin-SC Gimbal
GoPro 6 / 7 / 8 / 9
Pixal G1S RGB Light
Sony ICD-PX470 Audio Recorder 
Авто/Мото
Guaranteed in every video. "Reyt then" and "It is what it is" 😂😉
Thats the sad part it is what it is 🤣
And it’s totally goosed
I was thinking that you guys are unfairly mocking him for the "reyt then" when "it is what it is" makes a much more frequent appearance! xD
All part of being a "barnsli" lad!
I should know I'm from darn Road "t" them
@@clarksonisgod Straight outta barnsley
Oh man, removing rubber bushes out of arms is my favourite thing to do in the entire world. Can't get enough of it. 😩
I found out the quickest / easiest way to get the bushes out is to cut the rudder out with a drill bit and set a hacksaw up inside and cut the Bush race obviously be careful not to cut the arms... Always good informational video as always 🤙
Drill is better!
Super vos tutoriels 👍
Would love to see more dyno/ tuning videos 👌🏻
Nice one Ryan! Loving the longer videos recently - keep it up please, rather listen to you talk for 30-60-90 mins that que up a load of random 10 min content. I've rewatched the bora video many times just because of how interesting it was/your explanations along with the track car breakdowns of the build.
Hopefully lockdown is lifted soon for your sake! Haha
@@DarksideDevelopments it's fine just don't tell my jdm friends about this lol
Yes. Pretty big roll of the dice replacing OEM UCA's with non adjustable, aftermarket units.
Doesn't seem to much available in the way of LCA's either. Unless it's essential to try achieve clearances, I'd personally prefer to leave the OEM units on. At least then you are dealing with more known variables. And if you do replace only one set of CA's, definitely hunt around for units with as much adjustment as possible.
"n that says summit else... " :D
Hello great video. 👍
Next video putting misha new motor in his Golf? 🤩🤩🤩
So, the expensive HardRace uppers made it worse...
Well, at least now you know. 😁
I never realised the Amarok was so utilitarian at the rear.
It has the refinement of a Model T.
But, hey; it will haul stuff.
Guess that's the whole point of it...
Great video love watching them. Just a point....is the spec for camber not -0°20 +/- 0°30 With a max difference side to side of 0°20
(Not 0°20 to 0°30)
I would say you are within spec! (just)
It would be better more even side to side but as someone else said you will be able to adjust camber on bottom arm too.
Spec is something like that but I'd rather the difference be closer. The adjustments were made at the bottom
Don’t suppose you have a more detailed video of the steering rack bush replacements do you? On the website they are listed as fitment for a Q7 even though they don’t list as a separate part on the Audi EPC so just wondering if they can be replaced as mine failed it’s MOT for these having excessive movement.
We had a customer with the same issue recently. We found the OE bush removed from the Q7 rack had part number 2H0422405
The Super pro bushes are identical to this so I can't see any reason why they cannot be used on the Q7.
Just a quick question, will the new headlight fit a 2012 dual cab? They're so much nicer than the old ones
I think so!
cant you elonggate the holes for adjustment
You could
Just looking at the rear, with the exhaust so close to the spare tyre, could the heat affect the rubber of the tyre closest to the pipe,
I know its prob been tested tons of times by vag but i imagine the rubber by the pipe to perish much quicker because of the heat cycles it gets?
Those bloody inner liners double any job time lol
It can't help!
@@DarksideDevelopments lmao, good answer 👍
Not a VAG exhaust mate.
Right then , 😂 that was a good video
Do you have a video of you replacing the steering rack bushes tried to do mine today the steering rack won’t move far enough forward to replace the bushes, rack hits the front axle diff
It's very tight on the drivers side. One of our mechanics did them recently, he took a bolt out of the rear of the front diff and jacked it up as far as he could. Then had to get a bar in between to give it a little more space to be able to squeeze the bush in. Passenger side he said should be easy enough to get in
Did you find out why the new uca didn't work. Makes no sense especially if the Rok is lifted, it should have been better?
It was just stock Geometry. They could not answer any questions so we returned to stock.
Why didn't you put the Superpro offset bushes in the Hard Racing UCA,s?
They wouldn't fit and that would have been pointless as the camber would still be wrong
Camber difference could be that front subframe has shifted
I was thinking the same thing.
Its not to one side like we expected!
👍
Not fancy jigging and making your own adjustable control arm's.
They need to be strong!
Would really like to understand how caster works, even when googling I just can’t get my head around the benefits of positive/negative caster. Would love if it could be mentioned at some point
Positive caster is self-centering the steering going straight.
Positive caster gives you camber on the outer wheel while turning.
@@Paul_VanGo ahh that makes so much sense! Thankyou pal
@@declanduckworth7978 Hahahaha, really? Two sentences and it's all explained?
Well, you're welcome.
@@Paul_VanGo I mean I wouldn’t say all explained, but online it didn’t really mention much about how the camber changes when you steer, but just when thinking about how drift cars are set up it makes more sense in my head now
@@declanduckworth7978 If you have a bicycle, try looking at that. It has loads of caster.
Camber, in that case, is your lean in the corner.
Drift cars are a bit special.
They are mainly set-up for counter steer.
They usually have very poor grip at the front, when driven normally.
But the castor-angles on those cars are ridiculous, hence they steer themselves into opposite lock, when the rear is hanging out.
I can't fully watch most of your vids, because I find it boring. Still I do like your Channel. Just watching bits and pieces is good for me. Keep it up!
It's very boring
@@DarksideDevelopments ❤️
Liking the video,,, but for the love of god kill the music, could,slit my wrists 👎