FIAT 500 CLUTCH INSTALL
HTML-код
- Опубликовано: 8 сен 2024
- In this video we had to throw in a new clutch since his stock one started slipping with the new tune from Tork Motorsports! Damon decided to go with a Clutch Masters fx250 witch will be able to hold up to 250-300 hp no problems!
Follow us on Instagram
@valleycrewracing
Website
www.valleycrewracing.com
Yo its the pizza man from Riverside with the Abarth. My clutch grenaded at 116k miles. halfway through install now. Thanks for posting this video
The throw out bearing in my Abarth Pizza car went KABOOM! today... Glad to see you guys got it done. I got me a project now.
Congrats on doing your first clutch! As you mention, yes DMF aren't resurface-able. The shudder you feel is normal, it's from the high coefficient of friction on the clutch disk (6 puck clutches are even worse). Not sure how you were bleeding your clutch but I would never remove a line from a slave cylinder. Crack the bleed screen 1/4-1/2 a turn when you have positive pressure on it, such as pressing the clutch pedal or using a pressure bleeder.
Where is the bleed screen?
@@stevenclose7594 I don't know, I sure would like to myself or if you need it at all after a new clutch
Next time I’m in California to see my parents we gotta make a video! Your guys channel is awesome and you’re the closest to me in terms of youtuber/fiat owner
Yo! Just found your channel. Damn that is a beautiful car. I just bought three Fiat 500 Abarths. So I’m learning all I can. Love your car
You need to do a track day (AutoX, Drag, Track, whatev) with Amber Carter. With similar tires, I would love to see how the two little Italian lightweights compare.
I have 2 abarths .... I've done this job about 8 or 9 times for various reasons ... I dont ever comment on RUclips videos but from experience the clutch masters is the best quality and designed clutch out there I've had the absolute worst experience with spec clutch and dont recommenmd it .... the transmission job isn't that hard theres ways to do it super easy ... fiat actually gives there mechanics 4.5 hours to do this job .. it usually takes me about 5-6b hours due to the car being on bricks its alittle difficult putting it in and out..
Firsttt. Love your guys videos, dope abarth 500 ✌️
Just bought my 2014 abarth. Love it to death. I’ve been watching all your fiat videos to see what path I’m going to take when I start upgrading. Love your videos and your content, please keep us posted on the fiat! Love watching these on the toilet ;) subbed!!
Thanks for offering on doing the Q n A on the clutch bit.. I have some free play in my AAD and im hoping its just the bushings in the shift cables and not the clutch..
Im on the stock clutch right now and that chatter you feel in reverse I have but its not as noisy? It sounds more like the reverse gear doesnt engage some times and I just shift from 5th to Reverse to eliminate that..
Try going into 5th then R yourself and see if it changes anything for ya? As far as first gear goes? Only issue I have is the way the clutch engages for first gear.. Like it lags on wanting to drive and then my car is like.. Oh were going? Ok..
Lol
M Thompson if your cables are worn or stretched, the clutch pedal would creak when you push in or let out a bit. Chatter on a stock clutch is most likely from it nearing its end. And as far as the shifter not engaging fully, your synchro rings might be shot for reverse. Hard shifting will do that, but you can just let the car roll a couple feet with the clutch in and engaged in reverse and the shifter will pop in all the way. That’s what mine does now. Only reverse though. Hope that helps
Love your setup bro! I have a 2013 abarth that I'm building. Would love to see your parts list.
I wish you went sorta in depth how you got the trans out, cause my clutch is due on my 500 lol
Its really just finding a way out i cant really explain its just a pain.. haha. Jack up the engine and get the tilt and from there its just working it
So no need to remove the front bumper like fiat calls for
@@ban825 is that from a service manual?
Yes I got a whole print out telling me I have to remove pretty much the whole front off
I had my clutch, throwout bearing and pressure plate replaced. It has a loud squealing sound while driving. What could it be
Nice... Can you post up a link for the event. I may come out from colorado for it
Yeah love that LAKEY INSPIRED
That chatter noise is because of the way you were handling the clutch while doing the job.
Yessss I've been waiting for this video
So in your opinion is it worth doin your self or would you prefer taking it to a shop? Because sounds like a pain
Hey when bleeding the throwout bearing where is the clip you push and line you pull
I recommend getting a service shop manual from Mopar or 3rd party.
When do you recommend upgrading the clutch ? After phase 2?
Did you replace the throw out bearing while you had the trans off?
Does anyone here know what is the correct torque that is given to the oem flywheel of an abarth 2012
Do you use the old one flywheel or use a new one with new clutch to do the job?
Can you guys help me with my Abarth clutch??? Im gonna need it lack of good competent buds to help me with this. Im right down the 15 in Oceanside.
Hi I have a 2012 abarth, any clutch brand recommendations?
How much you spend on the parts? ( all)
Did you pull the motor to do it?
Rad. You'll be able to put it down now!
Where is the VP station?
By the dmv in temecula
Forever ago you burned that clutch!
😠😠😠😠😠