Perfect! Just purchased 4 sheets for our facilities kitchen. I was told you can cut with a sharp razor knife. I just came to watch the video and I am confident in cutting. Thank you for the quick video.
Been doing it this way for almost 20 years, no power tools need. If you need a finished edge you can score and snap it long and then clamp a straight edge on your line and run a router alone that edge..... PS, make sure you score the underside not the show side it does score well and you could damage the sheet.
Fantastic video. I only have 3 sheets to cut. I've used a circular saw before, but I like how straight and clean this comes out. I will try this tomorrow. Thanks!
This would sure have been my first approach... and as long as it gives a smooth enough edge to slide into the plastic trim pieces ( if you are using them) I think it makes great sense ! No dangerous Fiberglass Dust, no electricity required. And you get a dead Straight Edge. No I am going to try using some shears.. because I dont need that much accuracy, and it is easy to do along on the floor. but if that doesnt work out.. this is how I will cut mine.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Perfect! Just purchased 4 sheets for our facilities kitchen. I was told you can cut with a sharp razor knife. I just came to watch the video and I am confident in cutting. Thank you for the quick video.
Been doing it this way for almost 20 years, no power tools need. If you need a finished edge you can score and snap it long and then clamp a straight edge
on your line and run a router alone that edge..... PS, make sure you score the underside not the show side it does score well and you could damage the sheet.
Fantastic video. I only have 3 sheets to cut. I've used a circular saw before, but I like how straight and clean this comes out. I will try this tomorrow. Thanks!
Thank you my friend. Very simple way to cut it.
Lonnie my Man !
Well Done !
Thank You for producing this educational video !
Many thanks!
You solved the question I had in my mind …….. thank you bro ……….
Perfect video. We are tackling this today and wondering the best way to cut this panelling
This would sure have been my first approach... and as long as it gives a smooth enough edge to slide into the plastic trim pieces ( if you are using them) I think it makes great sense ! No dangerous Fiberglass Dust, no electricity required. And you get a dead Straight Edge. No I am going to try using some shears.. because I dont need that much accuracy, and it is easy to do along on the floor. but if that doesnt work out.. this is how I will cut mine.
Thanks! This video is very useful! we can offer this embossed panel too!
Cutting whiteboard in the Bahamas. Does it get any better than that??
Thank you!! Its been so long since i have had to cut FRP i went from the front. NOt good
Thanks for the video, I was thinking that using a blade would be a good option, and u Confirm that thank you very much
OK and what happens when you have two angles to cut like around a window ?
Possible to toss it up and router out windows?
Thank u!
Thank you
I use a pizza cutter
Okay the echo of you being in a very large empty room is painful even with the volume turned down. It is literally ear piercing.
@@darrinsiberia No one asked your opinion. Ever hear anyone tell you to "mind your own business"? I don't recall saying "JNash what do you think"?
@@darrinsiberia what a douche lol