Talaria Sting R Seat Upgrade! Must DO! $7
HTML-код
- Опубликовано: 3 май 2023
- Today we do our seat modification upgrade to the new Talaria Sting R! We have been running this mod on our older Talaria Sting's for months and it is so much better! Check out the video and the parts needed are in the description below!
2x m6-1.00 Metric Coupling Nuts
4x m6 washers
2x m6 x 16 1.00 pitch Hex Cap Screws (Preferably class 10.9 for strength)
Check out These Websites for awesome upgrades!
Luna Cycle: lunacycle.com/
E-bike Zilla: ebikezilla.com...
Warp 9: www.warp9racin...
Dirty Bike Industries: americansurron...
Stag Motorcycles :stagmotorcycle...
Great First Upgrades
Pro Taper Grips: amzn.to/3pPoVMm
Light Switch: amzn.to/42MnAEH
Upgraded Pegs: amzn.to/3WioPsO
Seat Riser Video: • Talaria Sting R Seat U...
3 IN Riser Bar: amzn.to/3MhClbF
Brake Pads: amzn.to/43ahEF8
Tire Pressure Guage: amzn.to/427ebGs
Cool Upgrades
Decal Kit! Use Code TALARIABOYS to get 5% off! www.stickerfxgr...
Seat Cover: motoseat.com/c...
Our Riding Gear
Helmet: amzn.to/3pZ40GD
Gloves: amzn.to/435okF4
Check out our Bike Builds!
Reeds Talaria Sting MX4 Build:
Decal Kit www.etsy.com/u...
Seat Riser Video: • Talaria Sting R Seat U...
Warp 9 Axle blocks amzn.to/3BzrUv5
Warp 9 Stem: www.warp9racin...
Warp 9 Stem lock: www.warp9racin...
Black Chain: amzn.to/437f5nf
Warp 9 Handlebar: www.warp9racin...
Warp 9Sprocket: www.warp9racin...
Lances Talaria Sting R Build:
Decal Kit www.etsy.com/u...
Seat Riser Video: • Talaria Sting R Seat U...
Ko Nano Controller: gritshift.com/...
Manitou Dorado Expert 29: hayesbicycle.c....
Warp 9 Rear Rotor Guard amzn.to/3ImQCCv
Warp 9 Sprocket 58 tooth: www.warp9racin...
Warp 9 Axle blocks amzn.to/3BzrUv5
Warp 9 Stem: www.warp9racin...
Warp 9 Stem lock: www.warp9racin...
Chain: www.warp9racin...
Hayes Dominion brakes: ebikezilla.com...
Brake Rotors: stagmotorcycle...
Handelbar: www.enve.com/p...
Light : gritshift.com/...
Peg Bracket: amzn.to/43fkKaX
Peg Brace: amzn.to/45lP8SX
Alex's Talaria Sting MX3 Build
Decal Kit www.etsy.com/u...
Seat Riser Video: • Talaria Sting R Seat U...
Warp 9 Handlebar: www.warp9racin...
Shock protector: ebikezilla.com...
Stem: ebikezilla.com...
Foot pegs: ebikezilla.com...
Axle blocks: ebikezilla.com...
Stemlock: ebikezilla.com...
Fork : ebikezilla.com...
Filming Gear:
GoPro Hero 11: amzn.to/3OqExAl
GoPro Volta: amzn.to/3pM1UtH
DJI Mic: amzn.to/42MSgFU
GPS Computer: amzn.to/3ImYuUz
Epic Drone Works: www.epicdronew...
Thanks For Watching!
Please consider subscribing!
#talaria #surron #ebike #utah #trending #talariasting #dirtbike #emoto #foryou #supermoto
After MONTHS of not doing this I finally did it and wow this made such a difference, thanks guys!
Nice!
Thanks for the content! Have not ordered my Sting R yet but will in the next few weeks. I will already have the mods that you have suggested ready for when the bike comes in. Keep up the great work
Great! Thanks for sharing this! I just got my first mx4 and that steep seat angle was the one thing that has been driving me crazy about it. Great videos, glad I found your channel. Subbed!
Thank you for the idea I didn’t want it that high up so I just put three washers underneath and it raise it up just enough when I upgraded my seat keep posting love your channel 😊
Glad to hear that worked!
Just did this upgrade, makes the bike go from unstable standing, to significantly better! Keep up the good work boys
Great mod, very well explained 👍
After riding this weekend, my butt says this is a great idea!!
Great work guys. Now, do a video on moving the pegs forward, it's not as easy as people think, I did mine, took way longer than it should have.
What did you do to do this??
@@mxracingunlimitedltd7784
It can be done but it's sort of a challenge getting to the nut on the inside
Hey guys! Great videos. Was about to do this mod but was wondering how long the connector nuts are?
Hey! I was the guy who talked to you at McDonalds in Moab tonight. I live just a couple streets away. If you're in town for the weekend maybe we can go on a ride! Me and a buddy are doing a full moon ride tomorrow night.
Just did this; super-easy sub 10 min modification. Any idea what other connectors are in that bundle feeding the taillight?
I think with a 21" front wheel, that will help correct the geometry of the bike. And improve off road riding.
you mean with 21'' or with the mod and the 21'' ?
@@yessirski21 I think with just the 21" wheel. I have one on order. I will let you know once installed how it feels. My only concern with the seat mod is when you are riding single track and want to scoot forward in the seat for sharp turns, that could interfere with your ride position.
got my R last week and its been a blast. Thanks for this mod, much needed! Do you know of any good storage solution, maybe bag under the seat? Would be great to run to the store without a backpack. Thanks again.
Are the coupling nuts 18mm? Idk why y’all wouldn’t put the size or a link plz help
did you find out
I would fill that open space with construction foam and painted black... extra support and nice look...
I would be cool if someone could make (Print) a custom filler for that new space created by this mod.
I couldn’t find any metric couplings in my town so I ended up just threading on a “stopper” 6 mm nut and flipping the lock nut around and used that for a coupling. Works pretty good just incase someone else runs into the same issue.
Nice!
The best seat is the Bella gel stunt seat
I stripped the screws where you put the extension in how do you think I could fix it?
How long are the coupling nuts?
you never gave length of screw or coupling nuts
What is that metal bracket under the rear fender called? I need to find a replacement part for it.
Hey great video I'm doing this mod today! Was just wondering what the rough length is for you M6 Coupler Nuts?
Looks to be about 2inches or 50mm maybe? Do you know?
Thanks!
The coupler nut is 3/4 inch long
@@Talariaboys Thanks!
Might have to try this on my mx3
Do you have the links for all the supplies?
Do you guys have a link for the socket 10mm it seems I bought one a long time ago but it doesn’t include the 10mm one.
Ottimo complimenti😊
Una domanda ho visto che al minuto 8.26 rimonti un pezzo di metallo nella parte finale della sella ,lo hai costruito tu? Perché sulla mia non c'è 🤔
So the new sting R has that new piece, the older Talaria models don’t have it so you wouldn’t need to worry about it.
just ordered a sting r from luna, its gonna be a tough wait lol
Have you guys tried putting the sting r battery on the old version and seen if it has any benefits?
HI! I would like to know which fork is mounted on the talaria seen on the right in the intro at 0.07 sec of the video!!
its a DNM Volcano fork, its a very low end fork.
How many mm high the coupling nuts? Is 18mm good?
I used 30mm tall nuts
When do we get the videos from your Moab trip!?!?!?!?!?!?!??!?!
Will MX-3 seats for the sting Mx-4? Already need a replacement and ebike zilla is sold out…
Yes seats are identical
Good job. On a side note, how do I find the mileage total on my Sting?
Thanks!
Reed looks high as hell in this one lol.
Lol
Wondering is the seat on the r the same as the mx3?
Yes the seat is the same
is the the sting R seat the same as the mx3? i want to get the thrillseekers seat cover
@@Talariaboys thanks boss
Mx3 or surron?
how long are the coupling nuts
I believe 1 cm
Can’t be 1cm , They look more like 2cm
Where can I get the seat?
Did you watch the video? It’s just some parts that change the angle of the seat, if you actually need a replacement seat checkout E bike zilla, they sell the oem seat.
@talariaboys what head light is that on the mx4?
Is it the same for mx3 talariA?
Yes
@@Talariaboys if I put a 54t sprocket Do I need to change my original chain?
Yes you’ll need a new longer chain, 112 link for that size sprocket. All new chains come about 120 links and you’ll cut it down or often times you can buy them the exact length
@@Talariaboys thanks man. Any recommendations for ideal back tire size? I need replace my back tire and was thinking maybe a 16 or 17 inch. Some are 70/100 or 90/100. ? What you recommend
Do you need to just replace your tire or your whole wheel? If it’s just your tire I’d do a Kenda milllville 2 70/100/19 or a Shinko 241 2.75x19 but if you need to replace your whole wheel I’d get a 16 inch wheel and add a larger type of tire, it could even be those same kinds just wider
that is a terrible mod because you can make it tall as you like for comfort but if you ride the bike hard you need seat low so you can distribute body weight how you need in air or in corner the higher you sit on a bike the worse it corners and the less your bike can articulate in ride like trials bikes. the higher the seat the greater risk of OTB accidents. posers raise seats if you want to raise the bike you want to make this change in suspension idealistically and if not you should raise the bars and consider a 21 inch front tire
Guess your the expert then. This mod barely changes any of that and just fixes what was designed wrong from the factory.
@@Talariaboys its a mountain bike alternative it was an attempts to make mountain biking feel like motocross. so it is bike size its not a design flaw its a purchase flaw if you want something that fits a bigger person just get the real thing!!!!
the bigger you are the more you weigh the more you weigh the more suitable item that targets your needs..... like my nephew can ride a surron as good as you can ride a 450! because his ratios would have similar dynamics. the bike was designed fine, your just asking the bike to fit a bad purchase decision.
besides its hard to have low center of gravity when you need high suspension travel so this is why big bikes are tall your making a small bike big and changing center of gravity. any pro would love a lower seat but its just not possible because they send it to the stars and need the suspension travel to land it. its not opinion its physics
Great Mod, on my way to the hardware store now. Been riding 40 plus years. Don't listen to the expert who's jumping through the air while sitting goon style wishing his seat wasn't getting in the way LoL LoL LoL
Edit: Mod complete, WOW what a difference in feel and going from sitting to standing. Great for Mini Moto and Enduro.. Thank Guys, keep it up!!!!
They are not lifting the whole seat. They are simply raising the front up a little bit because the angle on the seat feels like shit from the factory. Making the seat more level with the ground is a good thing. Nobody wants to be sitting on an angled board.
I geat the idea, but now the plastic bottom of the seat is no longer suported so as soon as it gets brittle it will break?
It’s possible but we’ve had good luck with it so far.
Seats are cheap enough to replace every few years if it becomes a problem.