(HOW TO) Talaria Sting R Gear-box Oil Change // Must Watch! Updated Standards from Talaria!
HTML-код
- Опубликовано: 28 сен 2024
- We show you exactly how to change your gearbox oil and we go over the updated Talaria standards on how often to do the gearbox oil change!
Check out our website for any upgrades your looking for! ⬇️⬇️
tbelectricmoto...
Use Our discount Code (talariaboys)
Purchase the right kind of oil Here: tbelectricmoto...
All new standards are compatible with talaria mx3 model and talaria mx4 model
Talaria now recommends changing the oil at these increments:
Break in at 186 Miles or 300 Kilometers
Then every 3100 Miles or 5000 Kilometers
They do recommend using the dipstick to check the level every 1500 miles and if your oil is low just top it back off but no need to replace oil.
Talaria now states that 75-90ml is the recommended amount of oil.
Torch: 2 Pack Butane Torch Lighter: amzn.to/3MeTUsS
Lighter fluid Zippo Butane Fuel: amzn.to/45dFFNk
Filming Gear:
GoPro Hero 11: amzn.to/3OqExAl
GoPro Volta: amzn.to/3pM1UtH
DJI Mic: amzn.to/42MSgFU
GPS Computer: amzn.to/3ImYuUz
Epic Drone Works: www.epicdronew...
Thanks For Watching!
Please consider subscribing!
#talaria #surron #ebike #utah #trending #talariasting #dirtbike #emoto #foryou #supermoto
Thank you guys. Super helpful video. Some additional info for those doing the same -
1.) It will take the full 90ml oil it came with. Like they said, if you lift the front of the bike it drains back into the gearbox and allows more in. Since I was solo and without a stand, I would fill to the top, then lift the front end of the bike allowing it to drain back to let me to add more. I had to repeat this quite a few times.
2.) Be careful with the two screws that hold the metal bottom bracket (the bracket that gives you a place to screw into the bottom of the plastic cover). Lot's of people (including me) have over torqued these and they'll snap right off, leaving them stuck inside. Use an allen wrench by hand and don't he-man it.
Hey i just really wanted to thank you guys, I was able to do my first oil change. I don't think you understand how big of a deal this is for me as someone grew up without a father, who has zero knowledge of anything tool related someone who struggles to put up IKEA furniture.... when I saw I had to do this myself I was worried, so I went to the tool store today, I bought the tools I needed, and I was able to do it, it's all thanks to you guys and this great tutorial video. Much love, thanks a bunch.
That’s awesome! We really appreciate you watching, hope you have a blast on your sting!
Nice! We need more poeple willing to atleast try and do stuff like on their own. Its all just a learning process after youve looked into it enough to understand what you need to do..
Now its time to find more parts to replace and swap out with upgrades and let the fun begin! Lol
Its always good to work on your own bike i know how u feel i was raised by my grandparents when i was old enough my grandpa was to old to teach me but thank god for. RUclips and google fixing something new is scary but you got this you gotta say to yourself
Great video! Pro tip, make sure to clean around dipstick (top) before opening. for that matter, clean the whole bike well, before opening that up, dirt can fall down from the seat area, right into the hole Don't want dirt or contamination in the gearbox.
if you leave the rear bolts on the bash guard and just swing it downwards you can have your oil pan hang off the bike
what this allows you to do is roll it forwards and backwards a few times, which will rotate the gears and you'll see a bit more oil slush out, just guarantees you flush the entire system
i also roll it forward and backwards a few times when im filling it or it doesn't accept the full 75-90ml
Thanks for the tips!! Oil change went smoothly. I will warm up the gearbox next time so the oil flows better. I also found that if you turn the wheel a little, it helps distribute the oil better. Still have at least 10mL left. Thanks again!
This made the oil change so much easier. Thanks guys!
🤘🏼
Great to hear!
MOST IMPORTANT: USE A HIGH END SOCKET OF EXACT SIZE. DO NOT USE A WRENCH. PREHEAT the area to help release the lock tight. You do not want to strip the bolt.
True. I'd also say a 6 point socket as well, not a 12.
what’s the exact size?
@@Apezillaupdate what’s the exact size
17 metric
thank you guys for making such an amazing video! love the family vibe
Love the content! Keep it up guys.
This is awesome, thanks for all you do.
Thank you so much for this video! This is my first e-bike and I know NOTHING about them. I was able to do the first oil change in about 30 minutes thanks to you guys. Much love from Kansas City!!
Glad it helped!
Really informative, great bunch of dudes aa well. Been binging all there videos.
Glad you like them!
Talaria getting the specs wrong in the beginning caused a lot of confusion. I carefully measure fluids I'm changing so I knew 87 ml came out and no way 150 was going back in. Hard to convince people to go against the factory specs. A single drive up car ramp shoved against the wall and a couple tie downs makes it very easy to raise the front of the bike by yourself.
Yes, most machines hide oil within, best to measure what comes out!
I put 140ml back in buddy if u lift the front of the bike it lets more oil in
Ya, not good advise
Is the drain plug magnetic? If it’s not I could see that being beneficial to add.
Great job guys!
Good luck with your business guys
Thanks💪
So where is link for this torch??
i’m not using the same oil as you mine is in a 1 quart container, so how to i make sure i don’t over fill it.
Get a syringe and only use 80-90 ml
What’s up Boys! Getting my mx4 next week. I really like those graphics. Where did you get them?
Hey that’s good to hear! They are from stickerfx graphics!
You guys are the real I brought myself one of these bikes last spring I was thinking of a gas powered then I can cross your channel then I had my first electric bike well without peddles. lol
Nice!!!
Do they use that same oil from the factory? Also is it more beneficial to get a better brand of oil or that wouldn’t matter?
The factory oil is break in oil and the oil you put in is a bit higher quality. No need to put really high end oil in.
Does this work for the talaria xxx to
the xxx does not require an oil change
Hey guys. I ordered 1L of 80W90 Hi - performance Hypoid Gear Oil it sas for Talaria Sting. Will this be ok to use also?
Should work fine 👍
I can't remove my friggen drain bolt. How long did you guys heat yours for? And where exactly were you aiming the heat at? Ffs I'm done with this been trying for 3 days to remove it.
Dude i hope you ended up doing it man, i can feel the pain dude! Did you?
Yes I love you also okay
Have you ever had problems with the mx3 controller? I didn’t even get one charge and my bike threw all kinds of codes 😞
No it’s been fine.
we need a xxx oil change and some info asap!
Xxx doesn’t have a gearbox! It’s a belt drive so no need for oil changes.
I assume it comes with the break in oil already in it?
Yes
They come with some kind fluid they call oil but worth getting that shite out of there sooner rather than later.
Is it the same thing on the xxx?
No the xxx has a belt drive instead of a gear box
Cant do without a prybar its nearly impossible
Lol I broke one of the bolts on the bracket. I feel like the bolts on the bike are prettt weak be careful!
I just did too...what did you do to get the stud part out or reattach?
PLS TELL ME WHERE TO BUY THE OIL!!!!!!!!!!!!!!!!!!!!
Amazon... Type in the specs and off you go
Молодцы ребята. А то я купил такой же байк. А куда и зачем это масло не знал. Теперь знаю. Спасибо. ))))👍❤️😁простите ..а через сколько километров менять масло. После какого пробега. ???
Clutch
So like a regular motorcycle oil change lol
I got my talaria assembled by Luna cycle WHY TF they tightened the Alens so fucking much
You realize they don’t assemble most of the bike at Luna it’s only the front wheel, bar/stem and pegs. The factory makes everything tight.
Dont waste ur time if u dont got a crazy torch or a pry bar periodddd
Your giving people the wrong information. IT IS NOT JUST THE PERFECT AMOUNT!!!! The bottle contains too much oil. Not the perfect amount
I am subscribed and watch all your videos. But be careful what you tell people cause it could be wrong and mess up there stuff.
What makes you think you are right and we aren’t?
@@Talariaboys Yeah idk man I also didnt use the entire bottle. Though I did have to drain the oil using a syringe from the fill cap because I couldn't open the drain bolt without stripping it further. I got as much fluid out as I could and It wasn't anywhere near 90 ml. Very good chance that we're doing something wrong though.
@@Talariaboys because I called Luna and they told me your wrong. It’s actually enough to do a few oil changes. So are you trying to tell me that you used the whole bottle? Nope
@@mike197606so why does Luna cycles themself say on their own website that it’s just enough for 1 oil change 🤔
On the drain bolt, heat is good, you can also take a rubber mallet and tap the end of your ratchet to create a "mini" impact effect on the bolt with the hand ratchet. Keeping your socket firmly and evenly on the bolt when tapping.
good vieo, thanks guys. My sting r just shipped, i should have it in next week!
Where you order from? I ordered from luna but haven’t got any updates
Me too! Comes in this Thursday! Can't wait
@@gregpena5751 when did you place order?
@@Surge_Stream Luna. Placed order on the 21st. ETA is next Tuesday. Just got the update yesterday. Patience, my friend. They are here!
@@Surge_Stream luna, i ordered mine on 04/18 and it will arrive 05/08. i think if you ordered after 04/21 it won't ship until the end of may / early june
Great video keep it up.
good idea with the lighter !
What is the link to buy the little torch pen, I need that to open up mine lol.
I’m still on the last model and just did my oil. Good to know I won’t have to open it back up
Love the content, I just got my first e bike and I went with talaria sting r mx4. I want to get Street tires what do you guys recommend?
I bought new tires for Enduro tires shinko sr241 is what I got or the (sr244 Enduro tire more geared twords street riding)
Great content and information. Keep it up.
Thank you so much. This was so helpful. I utilized every bit of your tips to get the oil changed. I even had to go buy a blow torch to get off the oil bolt. I Should have watched which way you loosened the bolt. I was actually trying to tighten it at first. That was a mistake.. Thanks again!
For the oil drain bolt i used a breaker bar and tightened it a bit THEN loosened it, it then came off ez first time, no heat needed.
Thanks for posting. I want to note that for me, the amount of oil in the tube was far more than needed for the gearbox. I could probably do two changes with what I was given.
Isnt the updated oil capacity 120-150ml?
same here
Any sources on the new update from Talaria I have been looking online and can't seem to find it
It has been so long I can’t find it. It was an official statement
Does it come with oil from the factory
Yes
I’m right here okay
Thanks Robert 🙌🙌
Why does it take the strength of Thor to get that bolt off when it’s only 25nm to tighten?! I ended up rounding my bolt!! Not only that 17mm isn’t even a tight fit on the wrench alsmot like they made up their own size
Got plug off to see it’s M16 but 16mm didn’t fit and 17 was loose! I’m replacing it with permanent drain plug like all my bikes and cars to just hook a hose to and never worry about it again lol
Ya it can be a pain!
Good video, keep it up
lets gooooo!!!!!!!!!!!!!!
Dam my bike didn’t even come with the oil
Weird!
Hey so when I went to add the gear oil, at least half way through it was already at the threads and the 2nd half went very slow.
Is that normal?
Yes
@@Talariaboys awesome good to know. Do you guys have a video on how to stop brake squeaking? I put new shimanos but it sounds pretty bad
At what miles should I do the first oil change?
180 ish
Welp I sheared my skip plate bolt, the one used to fit the #17 on, then couldn’t get the oil bolt out and stripped that. Any options🥲
Maybe take it to a moto shop. They have tools to get stripped bolts out