Talaria Sting Seat Upgrade! Only $7
HTML-код
- Опубликовано: 11 сен 2024
- Seat upgrade for your talaria sting! This is easy to do and very inexpensive! Just changing the angle of your seat will make a massive improvement in the overall comfort, especially on long rides!
Parts needed:
2x Metric Coupling Nuts M6x1.00
6x M6 flat washers
2x Stainless Hex Cap Screw M6x15 1.00 pitch
2x Standard Screws to replace the screws that hold on the plastic guard under the seat, these need to be double the length of the screws you remove, just watch the video and it will make sense.
Thanks For Watching!
Please consider subscribing!
Contact us @ Talariaboys@gmail.com
Check out These Websites for awesome upgrades!
Luna Cycle: lunacycle.com/
E-bike Zilla: ebikezilla.com...
Warp 9: www.warp9racin...
Dirty Bike Industries: americansurron...
Stag Motorcycles :stagmotorcycle...
Great First Upgrades
Pro Taper Grips: amzn.to/3pPoVMm
Light Switch: amzn.to/42MnAEH
Upgraded Pegs: amzn.to/3WioPsO
Seat Riser Video: • Talaria Sting R Seat U...
3 IN Riser Bar: amzn.to/3MhClbF
Brake Pads: amzn.to/43ahEF8
Tire Pressure Guage: amzn.to/427ebGs
Cool Upgrades
Decal Kit! Use Code TALARIABOYS to get 5% off! www.stickerfxgr...
Seat Cover: motoseat.com/c...
Our Riding Gear
Helmet: amzn.to/3pZ40GD
Gloves: amzn.to/435okF4
Check out our Bike Builds!
Reeds Talaria Sting MX4 Build:
Decal Kit www.etsy.com/u...
Seat Riser Video: • Talaria Sting R Seat U...
Warp 9 Axle blocks amzn.to/3BzrUv5
Warp 9 Stem: www.warp9racin...
Warp 9 Stem lock: www.warp9racin...
Black Chain: amzn.to/437f5nf
Warp 9 Handlebar: www.warp9racin...
Warp 9Sprocket: www.warp9racin...
Lances Talaria sting MX3 Build:
Decal Kit www.etsy.com/u...
Seat Riser Video: • Talaria Sting R Seat U...
Ko Nano Controller: gritshift.com/...
Manitou Dorado Expert 29: hayesbicycle.c....
Warp 9 Rear Rotor Guard amzn.to/3ImQCCv
Warp 9 Sprocket: www.warp9racin...
Warp 9 Axle blocks amzn.to/3BzrUv5
Warp 9 Stem: www.warp9racin...
Warp 9 Stem lock: www.warp9racin...
Chain: www.warp9racin...
Hayes Dominion brakes: ebikezilla.com...
Brake Rotors: stagmotorcycle...
Handelbar: www.enve.com/p...
Light : gritshift.com/...
Peg Bracket: amzn.to/43fkKaX
Peg Brace: amzn.to/45lP8SX
Alex's Talaria Sting MX3 Build
Decal Kit www.etsy.com/u...
Seat Riser Video: • Talaria Sting R Seat U...
Warp 9 Handlebar: www.warp9racin...
Shock protector: ebikezilla.com...
Stem: ebikezilla.com...
Foot pegs: ebikezilla.com...
Axle blocks: ebikezilla.com...
Stemlock: ebikezilla.com...
Fork : ebikezilla.com...
Filming Gear:
GoPro Hero 11: amzn.to/3OqExAl
GoPro Volta: amzn.to/3pM1UtH
DJI Mic: amzn.to/42MSgFU
GPS Computer: amzn.to/3ImYuUz
Epic Drone Works: www.epicdronew...
Thanks For Watching!
Please consider subscribing!
#talaria #surron #ebike #utah #trending #talariasting #dirtbike #emoto #foryou
Need more talaria how-to’s just like this! Cheers!
I give I learned so much from you guys on ebike it’s helped me so much please don’t stop doing your controller information because we want to know what you know okay
Honestly makes a big difference in seating position. Especially if you wear larger mx boots you want the extra room
Red locktite? That seat is going to be on forever!
You guys are why younger and stronger I am disabled it’s okay I have fun but I can’t handle a 500 hundred pound bike anymore I can service it but that’s it too much weight
Thanks guys!!! Super easy
Keep up the good work boys. Helping out a heap with my bike. Have you tried to go any higher?
What is the purpose of the plastic piece that is screwed in at 5:50?
ruclips.net/video/5sLSVVEaNNk/видео.html
Is it really necessary?
No, you don't need It and they eventually notice it themselves later on in later videos
Trying to do this mod but what are the size of the standard screws I need to get? Description only says standard Screws
I’m a 5(5 150 lb I’m not strong enough anymore and I need help
I would love to know if the talaria's seat will work on the stealth bomber? They are shaped exactly the same just have to see if they can mount the same
Did you see the advertisement for the eride pro s oh my god it’s a animal
You guys rock
I've noticed that putting that plastic cover back, isn't really needed. I've seen no difference with It on or off
Thanks, but I believe it's not enough surface to support seat. It will breaks in the end
Agree it looks like a weak link. I'm going to do this today with some flat bar aluminum between the studs to spread the load.
I agree with you, i make it and later make it back in original position
Anyone from the USA did this? I couldn’t find the hex cap screws M6x15 1.00 pinch or the other non specified screw under that one in the description. I checked like 5 stores in my area and couldn’t find one like that on Amazon idk what parts I need to do this (safely)
Please don’t tear me apart if I don’t know something I’m just starting this modding/ building stuff idk what im doing.
10 Pcs M6 x 1 x 18mm Long Rod Coupling Hex Nut Connector Zinc Plated Joint Nut Industrial Construction Fasteners a.co/d/7rTD3uy
iexcell 25 Pcs M6 x 16 Thread Pitch 1.0 mm Alloy Steel 12.9 Grade Hex Socket Head Cap Screws Bolts Kit, Black Oxide Finish a.co/d/cyRw6ZG
This video is more updated so check it out and let us know if you have more questions, thanks for watching :) ruclips.net/video/GLGzGI7LJNc/видео.htmlsi=GrfslyH31UINOH4v
thank you
Does this mod give you any extra seat height? Looks like it does from the video
@@Talariaboys awesome, looking for something to raise it up after going 16” rear. Haven’t seen a riser linkage yet for talaria.
How do you tell what generation sting you have
Look at the frame by the front shocks
You don’t need to here this a inter cooler on a turbo with 168,horsepower = no limits
Does this work for the Talaria sting R as well
Yes
I will trade you a zx12 for a telaria xxx
Hey do you know a guy named Grant Packer? He said hi!!
It FRIGGIN KILLS ME and my OCD when people do upgrades like this where they will take apart areas of the bike, make their changes and NOT CLEAN ANYTHING and put the bike back together with crap and mud all over the exact spot they work on. WHY NOT JUST CLEAN EVERYTHING you took apart???? Its craaazy to me. I will be doing this upgrade tho...nooice!!!! THX BOYS.
haha sorry about that! Hope you enjoy the seat riser mod though!
Whoops I sold the race bike to a girl in Waterford it’s like 1700 bucks I’m like I give because I have so many race bikes
Are your bikes stock?
@@Talariaboys do you guys plan on upgrading battery or controller?
Head injury it’s going to take some time
I was bailing off the bike smart the bike was dragged hit and run I live in such a small town ruel area no investigation and Mike lamer lives here
I think that this upgrade will brake the seat
we have not broken any seats on 15+ bikes
@@Talariaboys tell me, do you ride and jump off the trampoline? I mean, do the trails in your area have steep ups and downs? Because where I live in the woods, there are a lot of sudden descents and ascents, in some places you can even jump off the trampoline, which is why I think that in my case the seat might break.
Amazing that a $4500 ebike needs a $7 seat upgrade
@Adan M, These bikes are interesting but here in Oklahoma, I'm going way faster than whats legal on a $849 folder. 1100W peak, 80nm torque, 34mph on a full battery... For faster, I have a VT1300CT for that
Please give me a minute any one of you guys can ride my bikes I have so much of what I love
Give me a minute
I hope you dont ever sale those to someone who dosnt want that upgrade since you used permanent locktight.
@@Talariaboys Thats great and I am glad that you were able to remove them. Just know that recommending people to use red loctight ( which is used for a permanent bond) is not advisable. Someone may take that information wrong and use it elsewhere and then blame you for the bad advice. Just a word of advice as you want to be a vlogger then vlog good information to your viewers, otherwise you will start to look bad later.
@@joethompson9492 You can always remove bolts with red loctite. Just use a heat gun if you can't remove it with force. That's kind of the purpose of using loctite instead of welding parts together