Yeah brother 100% the lower link is actually just metal without bearings or bushes so the holes for the bolts elongate over time giving some play! Thanks for watching 👍🏻👍🏻
Fast ace rear shock is actually a good shock. If you want to spend a bit of money the ext arma MX is the best shock! Here’s my old review of the EXT ARMA MX shock : ruclips.net/video/0hjSysQE2u8/видео.html But the fast ace rear shock is real good! I even briefly discuss the fast ace shock absorber at the end here! ruclips.net/video/Z1EGWRd0Xkg/видео.html
@worthyo no brother! Im only short so the bike is the perfect size for me! However, I since this video I also replaced my triangle with a CNC one from e-volve Uk and it made the bike a fair bit quieter again as it fits nicer with better tolerances removed a small clicky / clunk from the suspension which had been bugging me! I do occasionally feel a slight clunk and weird sound when landing on jumps coming from underneath my seat though so I will have to investigate this!
Thanks man! And You don’t have to remove the sprocket, you just stretch the oring over the top as they are rubber then it push it behind the the clip if its a bit baggy, friction holds it in! If you contact me on instagram i can send you a short video explaining it!
Man really want to do the o-ring. Just recommending a how to vedio. Thanks for explaining why my front brake sounds exactly like yours. I thought I was breaking something. Thanks again.
any video for the oring install ? I'm trying to do it by just using snap ring pliers in between the mainframe and sprocket and having a tough time. Also, where do you get 2.4mm orings ?I got 0.10" inch ones which are very slightly too big and they honestly don't fit behind the c-clip. Is it possible to just push the sprocket back and wedge the oring in behind the c clip? or do you have to remove the clip ? because it almost looks like I can create enough space to wedge the oring in...
Ok bro. The sprocket expands 15% when it reaches 30°c from ambient from being 7 inches away from the motor and 2 inches away from a luke warm gearbox! Makes a lot of sense that 👍🏻 Only thing comparative to a chocolate teapot here was that comment. On dirtbikes the engine reaches way over 150 degrees celcius externally so they require floating sprockets but even those are less than 5% tolerance in space. Even at 30kw my bike doesnt exceed bath water temp externally and they all these talaria/surron motors cut off around 120° internally.
Thank you! Im glad you enjoy them! I have a 100/90-19 rear on my stock rear rim! You have to shave the knobblies down on the chain side a little bit but hardly anything. My tyre is Kenda Trakmaster K760. 😎
Hi mate , great advice 😁, where did you get O ring and back suspension tightener from pls mate to help with noise ? Also how did u tighten headset ! Many thanks Tom 🤙⚡👍
Hi Tom! So you can get a pack of various orings on amazon! I got my 18mm oring in one of those! Its cheap and comes with hundreds which come in handy when you need to shim or fix anything else. KATUR Universal O-Ring Assortment, 279Pcs Metric Set, 18 Sizes 3-18mm Internal Diameter, Black Rubber O-Rings for Plumbing, Automotive, General Repair amzn.eu/d/8fO0keA For the headset thats a very long explaination to type but this video should help! ruclips.net/video/G4Cm-H9j0uI/видео.html Once all tight install a head lock and it shouldnt move again! Hope this helps 🤞🏼🤙🏻
ruclips.net/video/rVbcm6XsnMg/видео.html Hello mate the answer to your question and maybe more you might have can all be found in one of my videos above^
Hello and thanks for the video :)I recently "upgraded" my rear linkage with the Warp9 model only to find it then add much more sloppy clankin 😩.I put back in the original for now, FYI Warp 9 not worth the $100.00 bucks. Your linkage sounds Great !!!
Thank you for heads up, i have no warp 9 on my bike personally not a fan but doesn’t mean its not good just personal preference. I prefer evolve uk. My new linkages are from here www.e-volveuk.com/talaria-parts/p/f9faa8837gc6r5kt7vwhrhuriy53nw 👍🏻👍🏻👍🏻
Hey bud, as i said. Place it between the sirclip and the sprocket. If you dont know what I mean by siclip its the c shaped clip holding the sprocket onto the spline. If you pause the video on the part where I show little box with the sprocket rattling you will see what I mean. Stretch the oring over the sirclip and itll sit between them like a rubber buffer as there’s too much gap 👍🏻
Most of the noise is inside the gearbox itself, the oring noise is more of a clatter sound you get when rolling over bumpy ground. The grinding sound isnt heard on the mx3 only mx4
@@stingyrogerr yeah i bought some, my circlip broke off so i'm replacing it. I am going to put that O-ring on too! hopefully doesn't happen again. I may need to also run my chain tension slightly looser lol
@coryheffernan1358 ah yeah should run maybe 5mm up and 5mm down movement from centre so 10mm total movement. If its too tight generally itll stretch a touch until it gets comfy then stay there for a while 👍🏻👍🏻
Hey man thanks for watching! It was just 18mm x 2.4. I got mine from this kit! Super inexpensive and comes with plenty of sizes to shim other things in future. www.amazon.co.uk/200PCS-Gasket-Assortment-Electrical-Plumbing/dp/B07ZRC4FXJ/ref=asc_df_B07ZRC4FXJ/?tag=googshopuk-21&linkCode=df0&hvadid=399557848743&hvpos=&hvnetw=g&hvrand=9962780841454842343&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9044923&hvtargid=pla-844215247384&psc=1&tag=&ref=&adgrpid=85427416219&hvpone=&hvptwo=&hvadid=399557848743&hvpos=&hvnetw=g&hvrand=9962780841454842343&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9044923&hvtargid=pla-844215247384
Between one of the clips and the sprocket - so the front side facing the bike frame would be easiest but if you have the motor out for any reason you could also put it behind the sprocket :)
I have a knocking noise that seems like it’s between my feet, it’s not the gear box, not the battery, would it be the linkage?? I only hear it when i’m riding down rough terrain but damn is it annoying
Re tightening the headset, mine still has the original part yet. I can't see up in the hole, looking up from the bottom, what size bolt or allen head is it? Ive tried a 10mm socket, different sizes allen, and nothing can catches. Is it a star type, and if so, what size? Tia!
The original headset uses a starnut, the bolt in the cap in the top of your stem bolts into the starnut sitting below it, to tighten you want to loosen your lower crown a bit then tighten up the starnut before re tightening lower crown. I swap all my bikes over to stem locks, a solid bolt all the way through to the lower crown clamping between the stem and lower crown, like a nut and bolt. A starnut will eventually slip👍🏻
Did you have to remove the swingarm to get access to the front sprocket? It’s so tight in there. If you did remove the swingarm, did the bolts come off easily?
Hey bro, you can actually just stretch the O-Ring over the sirclip and push it down between that sirclip and the sprocket. I didn’t have to remove anything at all! Also, If you have sirclip pliers ( can get on amazon for a few £/$) then you can use that to stretch the oring over too but if not then a small flathead screw driver works nicely. Thanks for watching! Hope this helps! 💪🏼😎
@@stingyrogerr so the O ring just sits on the outside of the sprocket,so I don't even need to take the chain off, for a second there I thought it went on the inside I didn't think it would stay on if placed on the outside but I think I can just about see yours when I paused the video. I got a pre production test talaria about a month before they went on sale last year and it's still going strong with the crazy low end torque have the talaria R coming next week, im on the fence on whether to sell the MX3 as it's just so much fun to mess about on, just found your vids randomly on here and you deserve a sub mate.
Hey! Thank you for watching! I really appreciate the kind words! You’re right, you don’t have to remove the chain you just stretch the o-ring over the sirclip using some sirclip pliers or a flat head screwdriver! Once you get your o-ring on, if its not fully seated give it a prod with a flat head and it will sink down into the gap between the sprocket and sirclip! Mine has been in for around 600 miles! Plenty more content to come every week!💪🏼
My swing arm atm is silent, sometimes your suspension triangle under the linkage has some slack if you still run the stock cast triangle, if you take a look at my most recent bike mods update video from a couple weeks ago - I replaced mine with a cnc one after some knocking was coming from the swing arm area and now the noise is all gone!
Hi i heard a “tac” sound when release completely the throttle at low speed, is very annoying. I feel it also through the “vibration” of footpeg. Can you help me to understand where is the source of this sound please?
The first sound is your front sprocket having slack which is sorted by the oring I mention in the video. It stops the front sprocket having any wiggle room 👍🏻
Hey man! Thanks for watching, it could be a number of things. When I had that noise it was a combination of a chain which was overly loose and the sprocket wobbling on the spline. If not then it could be that you need some more gearbox oil! Thanks for watching. If you need further help feel free to send me a video on instagram DM @stingyrogerr 🤙🏻🤙🏻
They have some of the same problems such as headsets coming loose but then they have their own problems like a squeaky belt or belt snapping and flexxy swingarm!
Thanks for watching! You are welcome! I have no clue what it could be but the noises are damn annoying. With a gas bike the engine masks all the rattles! 😎
Hi there, thanks for watching! I don’t understand your comment! What nose? If you mean noise then I think I explained in the video that when the headset works its way loose it begins clicking and making noise. the head lock as explained clamps everything together and doesn’t let the headset come loose again after you install it - in return the headset never makes that noise again as it never comes loose again. Hope this helps! 😎😎😎
Haha!! Thanks for commenting You cant ride a crosser half the places you can take these ebikes though! Ive got a KTM and Honda as well as surron, turbo levo and other two wheeled crap in the shed as well - im a bike addict! 🤙🏻🤣 theyre next up against the talaria in the series! Got lots of toys to text it against in the near future just getting round to filming it all! Thanks for watching mate!!
I could but I would have to take my bike apart again! 🤣 thanks for watching though ! I didn’t have any tutorials to watch when I did these hacks they’re fairly easy to work out bro! Give it a try ❤️🤙🏻
@renagadegamer1384 no bro! Sorry man, unfortunately not many people in the UK have the x3 as its £3,500 here and a brand new surron or mx3 can be had for £3,800 so it may be a while until I can get my hands on one!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thanks for the tips. Getting the suspension link in a few days. That should handle the slight slop with my rear suspension.
Yeah brother 100% the lower link is actually just metal without bearings or bushes so the holes for the bolts elongate over time giving some play!
Thanks for watching 👍🏻👍🏻
Great video , will be doing the O ring tech this weekend
Thanks mate, glad you liked it. Its a bit fiddly to do but once its on its a game-changer! 😎🤙🏻
Wow great video mate. Subbed
Thanks bro! Appreciate it👍🏻
Thank you.
At one time they did disgnosis by sound for ICE it tells a lot. Noise is rarely a good thing, often it indicates a risk of breakage.
True when you have an engine ticking away you cant hear these noises! So having a little motor whirring highlights the chain and sprocket sound
Thank you that was super helpful
Some nice tips mate. Learnt some stuff there
Cheers
Glad to help Johnny! Hopefully see you out on your Talaria on your channel soon! 👍🏻
Thank you 👍
Thanks man, there are very few videos to help with these! Subbed forsure
Thanks bro appreciate it!
Glad you found it useful! More videos to come 🤙🏻🤙🏻🤙🏻
I enjoy your videos thank you, that's how we roll my boy
Really good cheers
I’ve got standard fastace rear shock and damper need upgrade any suggestions please
Fast ace rear shock is actually a good shock. If you want to spend a bit of money the ext arma MX is the best shock!
Here’s my old review of the EXT ARMA MX shock : ruclips.net/video/0hjSysQE2u8/видео.html
But the fast ace rear shock is real good!
I even briefly discuss the fast ace shock absorber at the end here! ruclips.net/video/Z1EGWRd0Xkg/видео.html
subbed! great vid bro, appreciate ya mate!
Thanks man! More to come stay tuned! 🤙🏻🤙🏻🤙🏻
I've done everything but the o-ring and still have a little noise. I will try that soon. Thanks for the short and straight to the point video.
Thanks for watching! Glad you found it useful!
I have a few more hacks up my sleeve for a future video so stay tuned! 🤙🏻🎥
@@stingyrogerrhave you done the seat riser mod? I haven't yet but wondered if it makes any difference
@worthyo no brother! Im only short so the bike is the perfect size for me! However, I since this video I also replaced my triangle with a CNC one from e-volve Uk and it made the bike a fair bit quieter again as it fits nicer with better tolerances removed a small clicky / clunk from the suspension which had been bugging me! I do occasionally feel a slight clunk and weird sound when landing on jumps coming from underneath my seat though so I will have to investigate this!
@@stingyrogerr cheers brother! Happy riding!
Well done
Thanks
still one of your best videos, can you please make a video on how to install the o ring and how to remove the front sprocket and such
Thanks man!
And You don’t have to remove the sprocket, you just stretch the oring over the top as they are rubber then it push it behind the the clip if its a bit baggy, friction holds it in! If you contact me on instagram i can send you a short video explaining it!
Hi, can’t seem to message you on insta… I have the chain rattle issue, have an o ring but there isn’t a gap at all to get it in over the clip ?
You might have push it down there with a flat head, mine has enough space to push it in by hand it has so much slop
Good stuff.
Thanks for watching! Appreciate the support🎥
Thank you
Man really want to do the o-ring. Just recommending a how to vedio. Thanks for explaining why my front brake sounds exactly like yours. I thought I was breaking something. Thanks again.
You are very welcome! Thanks for watching man! 💪🏼🔥
any video for the oring install ? I'm trying to do it by just using snap ring pliers in between the mainframe and sprocket and having a tough time. Also, where do you get 2.4mm orings ?I got 0.10" inch ones which are very slightly too big and they honestly don't fit behind the c-clip. Is it possible to just push the sprocket back and wedge the oring in behind the c clip? or do you have to remove the clip ? because it almost looks like I can create enough space to wedge the oring in...
O ring for the chain is as much use as a chocolate tea pot, the machines tollerances are done digitally, it's like that for a reason , metal expands
Ok bro. The sprocket expands 15% when it reaches 30°c from ambient from being 7 inches away from the motor and 2 inches away from a luke warm gearbox! Makes a lot of sense that 👍🏻
Only thing comparative to a chocolate teapot here was that comment. On dirtbikes the engine reaches way over 150 degrees celcius externally so they require floating sprockets but even those are less than 5% tolerance in space. Even at 30kw my bike doesnt exceed bath water temp externally and they all these talaria/surron motors cut off around 120° internally.
lol Aaron he told you straight mate
Hey mate nice videos.
I'm getting my Sting R in a few days. Do you think 100/80-19 will fit with stock rims on the rear? cheers
Thank you! Im glad you enjoy them!
I have a 100/90-19 rear on my stock rear rim! You have to shave the knobblies down on the chain side a little bit but hardly anything. My tyre is Kenda Trakmaster K760. 😎
Hi mate , great advice 😁, where did you get O ring and back suspension tightener from pls mate to help with noise ? Also how did u tighten headset ! Many thanks Tom 🤙⚡👍
Hi Tom! So you can get a pack of various orings on amazon! I got my 18mm oring in one of those! Its cheap and comes with hundreds which come in handy when you need to shim or fix anything else.
KATUR Universal O-Ring Assortment, 279Pcs Metric Set, 18 Sizes 3-18mm Internal Diameter, Black Rubber O-Rings for Plumbing, Automotive, General Repair amzn.eu/d/8fO0keA
For the headset thats a very long explaination to type but this video should help! ruclips.net/video/G4Cm-H9j0uI/видео.html
Once all tight install a head lock and it shouldnt move again!
Hope this helps 🤞🏼🤙🏻
Nice one mate thanks 👍 what about for back suspension linkage ? Cherrs mate
You’re welcome - Thats listed in the description!
Where did you get those frame guard things? The carbon fiber pieces
Those are from stag motorcycles. In my original build video I linked them in the description if you need a link! 👍🏻
Hello mate what tyres are these please and can i put them on the standard rims?
ruclips.net/video/rVbcm6XsnMg/видео.html
Hello mate the answer to your question and maybe more you might have can all be found in one of my videos above^
Hello and thanks for the video :)I recently "upgraded" my rear linkage with the Warp9 model only to find it then add much more sloppy clankin 😩.I put back in the original for now, FYI Warp 9 not worth the $100.00 bucks. Your linkage sounds Great !!!
Thank you for heads up, i have no warp 9 on my bike personally not a fan but doesn’t mean its not good just personal preference. I prefer evolve uk. My new linkages are from here
www.e-volveuk.com/talaria-parts/p/f9faa8837gc6r5kt7vwhrhuriy53nw
👍🏻👍🏻👍🏻
@@stingyrogerr Thanks for the info, buddy appreciate it.🤙
I have the carbon guard how do I install with the glue?
Its silicone you stick the back with silicone to the frame then ziptie on while it sets
Can you point out which part do you place the rubber ring on
Hey bud, as i said. Place it between the sirclip and the sprocket. If you dont know what I mean by siclip its the c shaped clip holding the sprocket onto the spline. If you pause the video on the part where I show little box with the sprocket rattling you will see what I mean. Stretch the oring over the sirclip and itll sit between them like a rubber buffer as there’s too much gap 👍🏻
Thanks man, Keep making those talaria content. You’ll be a hit soon. Keep it up
Is the O ring problem responsible for that kind of grind sound it makes sometimes when coming to a stop or rolling really slow?
Most of the noise is inside the gearbox itself, the oring noise is more of a clatter sound you get when rolling over bumpy ground. The grinding sound isnt heard on the mx3 only mx4
@@stingyrogerr nothing we can do to reduce the grinding sound? Or is it natural for the MX4 gearbox
@coryheffernan1358 thats normal for the mx4 gearbox unfortunately
how do you get the circlip back on? Man I can't seem to get it even with multiple pliers
You need circlip pliers! But you don’t actually have to remove the circlip to install the oring it stretches over the first clip !
@@stingyrogerr yeah i bought some, my circlip broke off so i'm replacing it. I am going to put that O-ring on too! hopefully doesn't happen again. I may need to also run my chain tension slightly looser lol
@coryheffernan1358 ah yeah should run maybe 5mm up and 5mm down movement from centre so 10mm total movement. If its too tight generally itll stretch a touch until it gets comfy then stay there for a while 👍🏻👍🏻
Awesome, trying to order a 18mm oring but it says the internal diameter is 13.2mm on one website, and on another one the ID is 18mm lol
Hey man thanks for watching! It was just 18mm x 2.4.
I got mine from this kit! Super inexpensive and comes with plenty of sizes to shim other things in future.
www.amazon.co.uk/200PCS-Gasket-Assortment-Electrical-Plumbing/dp/B07ZRC4FXJ/ref=asc_df_B07ZRC4FXJ/?tag=googshopuk-21&linkCode=df0&hvadid=399557848743&hvpos=&hvnetw=g&hvrand=9962780841454842343&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9044923&hvtargid=pla-844215247384&psc=1&tag=&ref=&adgrpid=85427416219&hvpone=&hvptwo=&hvadid=399557848743&hvpos=&hvnetw=g&hvrand=9962780841454842343&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9044923&hvtargid=pla-844215247384
@@stingyrogerr thank you so much my man !
what is your rear tire width and height?
Hi mate, its a 100/90-19 Kenda K760 Trakmaster. Thanks for watching 💪🏼
Hi! Which side of the sprocket should i put the o ring?
Between one of the clips and the sprocket - so the front side facing the bike frame would be easiest but if you have the motor out for any reason you could also put it behind the sprocket :)
any suggestions for sounds coming from front suspension?
If on stock suspension its time to upgrade or rebuild. Usually the sounds/clunks come from failed dampers or broken components 👍🏻
Is the process of doing he o ring mod on sprocket a hard job?
As easy as just stretching it over 👍🏻
Hi there, just curious is the o ring 18mm inside dimension or outside? Thanks!!
Hey man! Thats the internal diameter & the size you order online! Its cheaper to order a pack of 10! Then you have some spare…. 🤙🏻
@@stingyrogerrthanks so much! By far best video to date that solve this unbelievably annoying frustration. THANKS!!!!
Thank you, that means a lot!
Im glad you found it helpful, plenty more tips and hacks to come! 😎
I have a knocking noise that seems like it’s between my feet, it’s not the gear box, not the battery, would it be the linkage?? I only hear it when i’m riding down rough terrain but damn is it annoying
Yeah sometimes linkage bearings wear out! Check with the bike off the floor for play
What frame guards are you using? Link would ve greatly appreciated.
Hey thanks for watching! They are from stag motorcycles
stagmotorcycles.co.uk/products/stag-carbon-fibre-frame-guard-for-talaria-sting
Re tightening the headset, mine still has the original part yet. I can't see up in the hole, looking up from the bottom, what size bolt or allen head is it? Ive tried a 10mm socket, different sizes allen, and nothing can catches. Is it a star type, and if so, what size? Tia!
The original headset uses a starnut, the bolt in the cap in the top of your stem bolts into the starnut sitting below it, to tighten you want to loosen your lower crown a bit then tighten up the starnut before re tightening lower crown. I swap all my bikes over to stem locks, a solid bolt all the way through to the lower crown clamping between the stem and lower crown, like a nut and bolt. A starnut will eventually slip👍🏻
Did you have to remove the swingarm to get access to the front sprocket? It’s so tight in there. If you did remove the swingarm, did the bolts come off easily?
Hey bro, you can actually just stretch the O-Ring over the sirclip and push it down between that sirclip and the sprocket. I didn’t have to remove anything at all!
Also, If you have sirclip pliers ( can get on amazon for a few £/$) then you can use that to stretch the oring over too but if not then a small flathead screw driver works nicely.
Thanks for watching! Hope this helps! 💪🏼😎
@@stingyrogerr Oh cool. I have the pliers but if it is still too tight then a screwdriver it is. Thanks so much.
Anytime! Plenty more hacks and tips to come. Appreciate you watchin!
@@stingyrogerr so the O ring just sits on the outside of the sprocket,so I don't even need to take the chain off, for a second there I thought it went on the inside I didn't think it would stay on if placed on the outside but I think I can just about see yours when I paused the video. I got a pre production test talaria about a month before they went on sale last year and it's still going strong with the crazy low end torque have the talaria R coming next week, im on the fence on whether to sell the MX3 as it's just so much fun to mess about on, just found your vids randomly on here and you deserve a sub mate.
Hey! Thank you for watching! I really appreciate the kind words!
You’re right, you don’t have to remove the chain you just stretch the o-ring over the sirclip using some sirclip pliers or a flat head screwdriver!
Once you get your o-ring on, if its not fully seated give it a prod with a flat head and it will sink down into the gap between the sprocket and sirclip!
Mine has been in for around 600 miles! Plenty more content to come every week!💪🏼
Not sure if anyone's going to reply but how do you add the O Ring?
@@Chili_Bass you stretch it over the first c clip on the spline and push it down between the sprocket and c clip
Where do you get the o ring
Bundle box on amazon
Hi I have done everything to my talaria and it sounds like the swingarm makes the noise 🙃
My swing arm atm is silent, sometimes your suspension triangle under the linkage has some slack if you still run the stock cast triangle, if you take a look at my most recent bike mods update video from a couple weeks ago - I replaced mine with a cnc one after some knocking was coming from the swing arm area and now the noise is all gone!
@@stingyrogerr Yh I just put on the full e charged rear shock linkage but still makes sound from swing arm☹️
@harveystimpson2891 oh damn bro no idea, how many miles has your bike done could your rear wheel bearings be shot?
I’ve only done 500 miles but I’ve already checked rear wheel bearings there sweet and the bikes made the noise since I brought it
Hi i heard a “tac” sound when release completely the throttle at low speed, is very annoying. I feel it also through the “vibration” of footpeg. Can you help me to understand where is the source of this sound please?
The first sound is your front sprocket having slack which is sorted by the oring I mention in the video. It stops the front sprocket having any wiggle room 👍🏻
My bike creeks horribly when i hit the trottle from slow speed. Any idea why ? Sounds like gearbow area
Hey man! Thanks for watching, it could be a number of things. When I had that noise it was a combination of a chain which was overly loose and the sprocket wobbling on the spline.
If not then it could be that you need some more gearbox oil!
Thanks for watching. If you need further help feel free to send me a video on instagram DM @stingyrogerr 🤙🏻🤙🏻
Hey I posted a short with a rattle problem I’m having, can this rattle be fixed by the o-ring mod you were talking about?
Possibly! Give it a go man!
Do you know if sur rons have these problems?
They have some of the same problems such as headsets coming loose but then they have their own problems like a squeaky belt or belt snapping and flexxy swingarm!
Thanks for this video. Very useful indeed. Sadly though, the very loud rattle my Sting has is none of these. :-(
Thanks for watching! You are welcome! I have no clue what it could be but the noises are damn annoying. With a gas bike the engine masks all the rattles! 😎
Does ur noise happen when ur dereving?
@@johncrew-nj3yo Mostly, yes. But it's not the chain.
If it’s an mx4 their motor differs from the mx3 and recently after riding a few can confirm they have noisier rattly motors from factory!
@@BarcombeBoy same mate does it come from the left on side can’t seem to figure it out
Can you link me those carbon parts
To think I was expecting a before & after, or at least a sound clip
Theres 50 videos on my channel and lots are riding videos if you want to hear the sound of my bike :)
👍🏽👍🏽
So you told us about the headlock & headset but not how you stopped the nose 🤷🏻♂️
Hi there, thanks for watching! I don’t understand your comment! What nose?
If you mean noise then I think I explained in the video that when the headset works its way loose it begins clicking and making noise.
the head lock as explained clamps everything together and doesn’t let the headset come loose again after you install it - in return the headset never makes that noise again as it never comes loose again.
Hope this helps!
😎😎😎
I've got 1... get a crosser 😉even the welds on that frame look like crap..cheep Chinese expensive tat
Haha!! Thanks for commenting
You cant ride a crosser half the places you can take these ebikes though! Ive got a KTM and Honda as well as surron, turbo levo and other two wheeled crap in the shed as well - im a bike addict! 🤙🏻🤣 theyre next up against the talaria in the series!
Got lots of toys to text it against in the near future just getting round to filming it all!
Thanks for watching mate!!
@@stingyrogerr our one lucky guy then 👊
I agree 100% I am very fortunate.
I really appreciate you taking the time to watch though and your comment did make me laugh!! 🙌🏻😂
Can anyone make tutorial video on how to actually do all these hacks 😂
I could but I would have to take my bike apart again! 🤣 thanks for watching though ! I didn’t have any tutorials to watch when I did these hacks they’re fairly easy to work out bro! Give it a try ❤️🤙🏻
Thanks bro I bought a talaria X3 and my suspension under the seat keeps squeeking do you know how to fix that?
@renagadegamer1384 no bro! Sorry man, unfortunately not many people in the UK have the x3 as its £3,500 here and a brand new surron or mx3 can be had for £3,800 so it may be a while until I can get my hands on one!
😕 Promo'SM
Excuse me, I don’t understand?…
is this mx4
Mx3 - mx4 has same issues but chain noise cant be fixed