@@Jayztwocents Honestly, with your airbrushing, modeling and custom building in general I'm sure you guys could make something happen collab wise. Would be really neat to see one day if you do! :)
@@ianmillard1604 I know it's from Star Wars, just wanted to know what specifc language it was. I have seen the movies but I'm not too familiar with the lore outside of them. So is this like the official imperial language or something ?
as a Star Wars fan im blown away how this turned out! So simple steps nothing super fancy, just straight forward...sometimes less is more! Imagine you did a droid theme with R2-D2 or BB-8
"I don't label anything, I just hope it goes back together when I'm done" - JayzTwoCents Same Jay..... Same..... I always have so many left over screws
The fact that they were left over simply proves that they were never necessary in the first place. 😉👍 I used to have "left over screws" as well. Now, I have "factory spares". 😁
@@patricknolan1625 exactly sometimes they just add too many screws. It takes a fine set of skills to not put all the screws back and still have something work.
@@Jayztwocents *I FIX IT BUY IT RIGHT NOW WITH MY AFFILIATE LINKS IN THE BACKROUND!* *BROKEN CAR? FIX IT! BAD LIGHTBULB? FIX IT! BROKEN MARRIAGE?* wait no you can't fix that with I fix it
There has always been a huge mod community around Corsair cases, the 350D and the d series has a great dedicated community, Corsair even started selling them with front grill ventilation as modders we're opening up airflow by drilling and machining. Corsair is actually one of the few companies that seem to watch what people do with the cases and products and react in practical ways with future designs or added components to sell. I would say thermaltake listens as well, the P series is one of the best modular open air frames on the market.
Phil is getting REALLY good with the music for the B-roll footage. Sent chills down my spine. I'm loving the uptake in modding videos, and can't wait to see where y'all take it next!
Love the modding that puts model techniques to good use. Hope to see a lot more of these in the future. Inspiring me to do something with all the old cases I have around.
Jay's super satisfied smile at 18:26 while airbrushing made me really happy. Please keep doing case mods, Jay. You really seem to enjoy it and we really enjoy watching.
Your talent and experience with weathering shows so well. Looks freaking amazing dude! Would love to see more builds like this going forward (as time allows of course)
Your tip counts for everything and especially for lacquering. If you're gonna do any lacquer at all, make sure that your work area/room is 100% dust free. A single piece of dust on the wet lacquer means redoing your entire piece. Not just removing the lacquer. No, you need to get all the paint and base coat(s) off as well or risk a much worse end result. I currently have to sand down through multiple layers of paint on a table I'm doing, because the newest layer I applied, started to peel off. It's not noticeable right now, unless you look for it, but since I'm going for a high gloss end finish, it would end up looking like painted over coffee stains on one end. Not good for a smooth, high gloss white tabletop for my brothers height adjustable gaming table. You either remove your bust or watch your work turn to dust.
Have to agree, it definitely turned out really good. As to the "pro" shops that told you you can't use vinyl to cut stencils, they just don't want to do it or give away that "secret". Back in '86 in college when those cutter first came out, we quickly figured out that we could use it to cut stencils for air brushing lettering on posters and other projects, what we did was just use airbrush friskit vinyl which is thinner instead of the stickier and thicker normal vinyl.
@@BBW4MEPLZ The idea many people did before is not a copy. So if someone start a reaction channel is a copy as well? Just for example. They also dosn't custom mod the cases like he did with Star Wars what would add a different layer to this video idea.
I love these themed case mods with the painting and everything. Very creative and fun to watch. The build turned out amazing. I can't wait until the second Star Wars build is finished.
As a profession body man and painter I can say the best paint jobs are only as good as the prep work. Doesn't matter how flashy the paint is, if you cut corners prepping, it will never last. Also make sure you use the right prepping techniques for the right material you are painting and it will save you a lot of headaches later.
Man I love these builds man probably some of my favorite content coming from you Jay. I wish I could sit down in your shop and get a crash course on painting like that I gotta do a build like this at some point. I'm on a mission.
Beautiful build! Only thing missing is some matching paint on the I/O shield and it would be awesome. No text or anything on the shield, just matching grey paint. :D
Do a rough spray paint stencil of a Rebel Alliance logo on it, and now its a captured/salvaged imperial data core, it adds to the story of the item as a prop and explains the "carbon scoring" and grittyness.
deminybs Brain . I took apart my pc the other day to clean it (only put it together once before) and put it back together with better cable managment than before in 30 mins
3:49 IFIXIT!!! 💥 4:26 "I don't label anything. I just hope that it all goes back toghether when I'm done." - JayzTwoCents, February 2020 19:12 light speed ahead! 19:21 Wow! It did come out great!
the reprep needed to be done here and gj to j2c for just getting to it, but for future ref, if anyone ever finds themselves in a similar situation: if you put a thin buffing of car wax before using stickers they wont pull up the paint but still sticks very well. its a good idea for bumperstickers over painted bumpers (or anywhere on a car) to protect the clearcoat if you ever want to take it off, even years later.
Oxidation effect. Klingon vessels (Star Trek) were green right - oxidized copper; Klingons liked copper. Star Wars is mostly alloys, but oxidation was taken into account hence the almost milky gray/white tones of the ships generally. Good vid btw.
I can't wait for everything to settle down so you can start modding cases again because you're really good at it and I highly enjoy watching you do so. Good man.
Im an ASE Certified Automotive painter . Jay you need to scuff the surface and use a Zinc chromate etching primer then you can use a regular gray primer .In the future use a tac rag not a micro fiber rag before painting or clearing. Your paint job came out nice Jay!!!
He did say tng. And I don't think picking out the new movies, DS9, Discovery and Picard is fair. Because in general, star trek is more focused on negotiations rather than war. Not saying your examples are bad, they just explore a different part of the Star trek universe.
DS9 had to get gritty because it was competing with Babylon 5 which had epic space battles. Babylon 5 computer would be awesome. But you are right, Jay obviously hasn't watched those you mentioned.
I love how you have shown us that you don't need a full custom water loop to customize your pc. A lot of people can't afford to do a custom loop and this and the Destiny build imo are just as impressive (if not more impressive) than a lot of custom loops out there.. And it's more affordable. Great job, I'm sure you will get a lot of comments at Dreamhack.
@@BigT1984 why would anyone hate starwars? I know the prequel trilogy isn't as well loved as the original... But I think it's good. Hm? There were more? No there wasn't. There haven't been any new starwars since episode 3 came out forever ago.
@@MrBearyMcBearface well all stories start off slow so the prequels are just a really long intro sequence, but I digress all six of the star wars movies are really quite good
@@MrBearyMcBearface are sure ? you should google starwars , you maybe surprised to find out that since episode 3 wich for the record was the worst movie , they have released 3 sinful starwars movies just real crap that has earned haters.
"In SoCal temp that might as well be Antarctica" Um, it hit 65 there recently. You were actually colder than a place that's supposed to be known for ice. Scientists are actually very concerned about that.
As you now have a cnc plotter, you can actually get paint mask vinyl. You can get it from ebay and amazon, but I would recommend using a big brand such as Hexis, Oracal or 3M, as I know that they won't affect the paintwork. Love the mod!
Even with the 'It's just paint, nothing spcecial', it still looks a million times better that the whole RGB barf that they call 'modding' nowadays. Sure, it's basic, but it's how modding's done best in my eyes: Unique, yet still fully functional. Nice job Jay, I love these modding episodes.
I told you about the Silhouette Cameo plotter in the early Skunkwork days. In the sign industry masking vinyl is call sign mask and not vinyl. It has way less glue in order to prevent damaging the surface below. If you buy it from a sign supply shop it will be much cheaper than the hobby grade material like Cricut and Silhouette.
YOOO that microcenter employee in the ad with the long blonde hair is the same one who helped me collect all the parts I needed to build my system this holiday season. I believe his name is Ryan in Columbus OH. Was really helpful and friendly
Some orange LED's in the blast holes that flash on and fade would look good. Some minimal lighting in the vents blue or maybe simulated sparks could set it off.
Wow! I enjoy seeing these creative and imaginative case mods. Glad you made one for yourself, after the Destiny 2 build turned out so well. I've painted and customized my own Thermaltake Versa N24 case a bit, w/ a "Fallout" theme, inspired by these videos.
That was excellent. I actually did a Star Trek themed build a couple years ago. Used NZXT S340 elite chassis painted grey/silver with NCC-1710-D USS Enterprise letters on it. Front rgb fans in red, two HUE+ light strips in blue to resemble the warp nacelles and the NZXT Kracken x52 AIO pulsing in blue to resemble the warp core.
Just as an FYI when you are using that Cricut to make your stencils and stuff the best vinyl to work with is Oracal 651 imo. It will make weeding the stencil and stuff like that 10000x's easier. And vinyl is WAY cheaper on Amazon. You can get a 12"x10' roll for like $8.
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
You need to collaborate with Adam savage from myth busters
That would be the best collab ever.
@@Jayztwocents Honestly, with your airbrushing, modeling and custom building in general I'm sure you guys could make something happen collab wise. Would be really neat to see one day if you do! :)
He needs to see this.
this needs to happen!
@@Jayztwocents Definetly MAKE IT HAPPEN
If anyone is wondering, the lettering on the case says "PCMR * DATA PROCESSOR" on the rear and "I-DIGRESS" on the front.
Stormtrooper here, can confirm
Holy shit, it's not just gibberish ? Cool, what language is it ?
@@XBullitt16X it's the aurabesh, the language from Star Wars
@@ianmillard1604 I know it's from Star Wars, just wanted to know what specifc language it was. I have seen the movies but I'm not too familiar with the lore outside of them. So is this like the official imperial language or something ?
@@XBullitt16X Aurabesh isn't actually a language, but the written script for galactic basic, which is just what star wars calls English.
I absolutely love how the case says "I digress" in Aurebesh on the front.
The other side says pcmr data processor. I have no idea what pcmr means though.
And Jayztwocents on the keyboard
@@FormlessDuck Personal Computer Master Rave (PC Master Race)
I don't label anything, I just hope it all goes back together when I'm done.
Same here Jay, the trouble is I'm a surgeon.
David Stillman
“Doc, why is my heart near my groin now?”
“Well you gotta give something to your wife when your finished, right?”
😂💀
You should call this the “Corsair Rogue One”
Underrated comment, right here!
but...with the Empire logo?
CRO for short.
He should have gone rebel and then yes called it that
@@prunn their ship still had Imperial markings on it when they landed on Scarif.
The secret to “one day builds” is they always take more than one day - “Adam Savage”
as a Star Wars fan im blown away how this turned out! So simple steps nothing super fancy, just straight forward...sometimes less is more!
Imagine you did a droid theme with R2-D2 or BB-8
C3 P0, shiny gold with a red side panel
gonk
gonk
Gonk
@thegeorgezila And some people are just cunts. Go on, make this better and REALLY impress us. /sarcasm
WELLP this turned out phenomenal. I look forward to 2020 just being the year of Jay doing sick case mods.
So? How did it turn out?
@@2012Apokalypse lol
this comment didn't age well... as much as I wish it did.
emphasis on sick 😷
Did not age well
I like how even the Cosair lighting on the case looks really good with the mod.
"I don't label anything, I just hope it goes back together when I'm done" - JayzTwoCents
Same Jay..... Same..... I always have so many left over screws
The fact that they were left over simply proves that they were never necessary in the first place. 😉👍
I used to have "left over screws" as well. Now, I have "factory spares". 😁
@@patricknolan1625 exactly sometimes they just add too many screws. It takes a fine set of skills to not put all the screws back and still have something work.
It would be sick to do a flickering candle effect in iCUE to make the blaster holes look like it's still glowing hot
he forgot to put the destiny 2 build in description
ironic
I knew it would happen
@@Jayztwocents *I FIX IT BUY IT RIGHT NOW WITH MY AFFILIATE LINKS IN THE BACKROUND!*
*BROKEN CAR? FIX IT! BAD LIGHTBULB? FIX IT! BROKEN MARRIAGE?* wait no you can't fix that with I fix it
U say ironic, I say iconic
@@Jayztwocents I dont find the video how does it called?
@@PizzaPowerXYZ You seem stable...
Very cool!
I wonder if Corsair sees this and they're like "Wow"
maby theire more like.. pfft an other case ruined..
I think that they would certainly like the exposure that the Corsair One got. And probably would think `that's damn nice`.
There has always been a huge mod community around Corsair cases, the 350D and the d series has a great dedicated community, Corsair even started selling them with front grill ventilation as modders we're opening up airflow by drilling and machining.
Corsair is actually one of the few companies that seem to watch what people do with the cases and products and react in practical ways with future designs or added components to sell.
I would say thermaltake listens as well, the P series is one of the best modular open air frames on the market.
@@groenevinger3893 I was thinking more about "Warranty Void".
We saw it. We love it.
Phil is getting REALLY good with the music for the B-roll footage. Sent chills down my spine.
I'm loving the uptake in modding videos, and can't wait to see where y'all take it next!
You should do a DOOM theme build/case mod for DOOM Eternal. That could be cool
Hell yeah I send that. I play doom Eternal on my corsair one all the time. Plays 4k 120 hz hdr on my asus great. Just have black corsair lol
I'd pay money to see that, and I'd pay again just to have it
That should definitely be a thing
Nah pick something else. Everybody's always doing some DOOM theme build.
Love the modding that puts model techniques to good use.
Hope to see a lot more of these in the future.
Inspiring me to do something with all the old cases I have around.
4:51 "easy gash"
5:06 "I don't want the gash to be too big"
we can all only hope
Don't call the gash gash in front of other gash!!!
@@gagapeepap7698 snowflake much butch?
@@robert4352 apparently over your head...
19:18 Darth Vader's lunch box
Jay's super satisfied smile at 18:26 while airbrushing made me really happy. Please keep doing case mods, Jay. You really seem to enjoy it and we really enjoy watching.
Phil's editing is always good. "forshadowing" 😂
I'm still looking forward for the second part of the Red Dead PC mod!
Yeah lol I nearly forgot about it
Hot damn, I would buy that Star Wars Corsair One!
This wasnt even about the case mod, Jay just wanted to show off his boats.
Can we collectively get rid of RGB lights and make case mods the new thing to do. Love this build.
Duuuude that editing on the b roll for the final product was siiiiiick I want this kinda content 24/7!
Love the hidden "I digress" on the front and "PCMR Data Processor" on the back! It just wouldn't be JayzTwoCents without I digress...
"foreshadowing".... LMAO that cracked me up....
Me: *waiting patiently for winter to end*
Micro Center ad: "this holiday season"
Jay, you should do more case mods like this. Really shows off what you can do.
17:52 "these holes right here turned phenomenal, and i'm not done with them yet !" - JayzTwoCents
0:34 Today I learned that Micro Center employs witchers.
Im a certified Insert Technician
and Ghostemane
I thought PC dark elf
Amazing job but the lights need to be red.
Im there! I was thinking black with red lighting weathered or not. Still, looks great tho. Love these builds. Fun👍
Your talent and experience with weathering shows so well. Looks freaking amazing dude!
Would love to see more builds like this going forward (as time allows of course)
I can definitely see your model building skillz coming through with this build. Damn. The work/time/effort is impressive. Most impressive
Your tip counts for everything and especially for lacquering. If you're gonna do any lacquer at all, make sure that your work area/room is 100% dust free. A single piece of dust on the wet lacquer means redoing your entire piece. Not just removing the lacquer. No, you need to get all the paint and base coat(s) off as well or risk a much worse end result. I currently have to sand down through multiple layers of paint on a table I'm doing, because the newest layer I applied, started to peel off. It's not noticeable right now, unless you look for it, but since I'm going for a high gloss end finish, it would end up looking like painted over coffee stains on one end. Not good for a smooth, high gloss white tabletop for my brothers height adjustable gaming table. You either remove your bust or watch your work turn to dust.
20:00 imperial keyboard as well. Daaaamn!
“Pride of a nation, a beast made of Steel!”
"He was made to rule the waves across the seven seas!"
A simple "thumbs up" was not adequate. Sabaton FTMFW!! \m/
the first painting looked really great it looked like it really got a beating
Have to agree, it definitely turned out really good. As to the "pro" shops that told you you can't use vinyl to cut stencils, they just don't want to do it or give away that "secret". Back in '86 in college when those cutter first came out, we quickly figured out that we could use it to cut stencils for air brushing lettering on posters and other projects, what we did was just use airbrush friskit vinyl which is thinner instead of the stickier and thicker normal vinyl.
jay you should continue doing these custom mods its alot of fun watching the creative part in this unlike a normal standard build keep it up my man :3
5:55 Quote of the day:
“Gig don dignity in gon gow racin” 😂
18:25 Jay looks so in love
Make a new episode: PIMP MY PC EPISODE, and jay will just pimp alot of pc from other pc builder, that will be awesome.
Arnauld Anin Bitwit Kyle does this & calls it “PIMP MY PC”, that probably why he doesn’t do that. No one likes to copy other creators.
@@BBW4MEPLZ The idea many people did before is not a copy. So if someone start a reaction channel is a copy as well? Just for example. They also dosn't custom mod the cases like he did with Star Wars what would add a different layer to this video idea.
@@BBW4MEPLZ all he does is upgrade the components, would be cool if Jay did some custom aesthetic things.
Jeffrey Starr now works at MicroCentre? Quite the fall from grace
This kinda videos are exactly why I subscribed to this channel, and why you'll end up number 1 of modding PC's. HUGE. BALLS.
Keep it up Jay!
That damn, this is how I file my taxes gets me Everytime 😂
"Let's go talk about it!"
Conveniently forgetting about anything to do with the Borg or the Dominion War.
Deep Space Nine especially. "What's this 'talking' and 'negotiating' you mention? Fire torpedoes!"
@@angrodNumenesse People only argue about Kirk VS Picard because SOMEONE needs to take second place to Sisko!
Ka plagh!
You get this idea from everyone misreading rdr2 on Twitter for r2d2 😂
I love these themed case mods with the painting and everything. Very creative and fun to watch. The build turned out amazing. I can't wait until the second Star Wars build is finished.
As a profession body man and painter I can say the best paint jobs are only as good as the prep work. Doesn't matter how flashy the paint is, if you cut corners prepping, it will never last. Also make sure you use the right prepping techniques for the right material you are painting and it will save you a lot of headaches later.
21:47 The cost of the stencil vinyl and a couple beers. Friends or acquaintances will accept other forms of payment.
Man I love these builds man probably some of my favorite content coming from you Jay. I wish I could sit down in your shop and get a crash course on painting like that I gotta do a build like this at some point. I'm on a mission.
Man.
"Impressive. Most impressive!"
Beautiful build! Only thing missing is some matching paint on the I/O shield and it would be awesome. No text or anything on the shield, just matching grey paint. :D
Do a rough spray paint stencil of a Rebel Alliance logo on it, and now its a captured/salvaged imperial data core, it adds to the story of the item as a prop and explains the "carbon scoring" and grittyness.
23:46 - [Desire to Listen to Sabaton Intensifies]
To lead the war machine
RDR2 going down the PostMalone route? :P
4:27
absolute best way to do things
deminybs Brain . I took apart my pc the other day to clean it (only put it together once before) and put it back together with better cable managment than before in 30 mins
3:49
IFIXIT!!! 💥
4:26
"I don't label anything. I just hope that it all goes back toghether when I'm done."
- JayzTwoCents, February 2020
19:12
light speed ahead!
19:21
Wow! It did come out great!
the reprep needed to be done here and gj to j2c for just getting to it, but for future ref, if anyone ever finds themselves in a similar situation: if you put a thin buffing of car wax before using stickers they wont pull up the paint but still sticks very well. its a good idea for bumperstickers over painted bumpers (or anywhere on a car) to protect the clearcoat if you ever want to take it off, even years later.
Absolutely stunning Jay, I love this so much.
I love how Jay can't keep his hands of it at the end. Get a room. 😂
The end result is inspiring 🔥🖥
Oxidation effect.
Klingon vessels (Star Trek) were green right - oxidized copper; Klingons liked copper.
Star Wars is mostly alloys, but oxidation was taken into account hence the almost milky gray/white tones of the ships generally.
Good vid btw.
Mad props to Phil for the transitions!
I mean it's Star Wars, it will always look amazing.
Except for the 3 last disney movies... They looked shit
0:38 so that's what happened to lucius malfoy, he started working at micro center
Thought the witcher
Lol thats my buddy! He and his wife cosplay geralt and yennefer
Do Star Trek!! Take a Corsair Air540 and turn it into a borg cube!
That would be brilliant, infact I want to do it now!
With hull breaches for cooling.
i'd literally pay for that case tbh :P .
fuck that would be sweet
I can't wait for everything to settle down so you can start modding cases again because you're really good at it and I highly enjoy watching you do so. Good man.
The blemish at the top of the case makes it come together flawlessly
I'm still waiting for the Red dead redemption wooden case mod video...
what happened to part 2? did the case burn down?
What happened was it was easier to rinse and repeat another destiny 2 build, call it Star Wars and get some sweet views.
When he didn't use self-etching primer in the beginning the alarm went off in my head.
Yeah or adhesion promoter
@@sinformant IKR? I usually use both.
I wish Corsair offered a DIY version of the One case.
So you are not only a pc nerd and a car guy, you are also a scale modeler, I can really relate to you!
Im an ASE Certified Automotive painter . Jay you need to scuff the surface and use a Zinc chromate etching primer then you can use a regular gray primer .In the future use a tac rag not a micro fiber rag before painting or clearing. Your paint job came out nice Jay!!!
"Star Trek... It's just Galactic negotiation sim."
Jay must not have watched DS9. Or Enterprise. Or Discovery. Or Picard...
He did say tng. And I don't think picking out the new movies, DS9, Discovery and Picard is fair. Because in general, star trek is more focused on negotiations rather than war. Not saying your examples are bad, they just explore a different part of the Star trek universe.
DS9 had to get gritty because it was competing with Babylon 5 which had epic space battles. Babylon 5 computer would be awesome. But you are right, Jay obviously hasn't watched those you mentioned.
Wow, from trash can to imperial trash can!
"This was a Christmas present for my wife"
At your office lol
Phil's editing skills are legendary
I love how you have shown us that you don't need a full custom water loop to customize your pc. A lot of people can't afford to do a custom loop and this and the Destiny build imo are just as impressive (if not more impressive) than a lot of custom loops out there.. And it's more affordable. Great job, I'm sure you will get a lot of comments at Dreamhack.
19:19 lol no jay fart noise when you pop out of hyperspace?.. missed opportunity...
poop out of hyperspace
Wondering how many "First" comments Jay deleted today haha
More than normal I'm will to bet due to the hate starwars has earned .
@@BigT1984 why would anyone hate starwars? I know the prequel trilogy isn't as well loved as the original... But I think it's good.
Hm? There were more? No there wasn't. There haven't been any new starwars since episode 3 came out forever ago.
@@MrBearyMcBearface well all stories start off slow so the prequels are just a really long intro sequence, but I digress all six of the star wars movies are really quite good
@@MrBearyMcBearface are sure ? you should google starwars , you maybe surprised to find out that since episode 3 wich for the record was the worst movie , they have released 3 sinful starwars movies just real crap that has earned haters.
@@BigT1984 I tried but I get a blank screen. Maybe my brain is blocking a traumatic experience
"In SoCal temp that might as well be Antarctica"
Um, it hit 65 there recently. You were actually colder than a place that's supposed to be known for ice. Scientists are actually very concerned about that.
Global warming can suck a dick
Source?
@@willblack7353 it's been covered by many news companies around the world
@@mutley69 nature is going to take its course wether you like it or not
22:30 Jays words to live by: "If you're going to do it right, you gotta strip it..." looks like a great way to do a nice paint job too. 😋
XD
As you now have a cnc plotter, you can actually get paint mask vinyl. You can get it from ebay and amazon, but I would recommend using a big brand such as Hexis, Oracal or 3M, as I know that they won't affect the paintwork.
Love the mod!
boom
this is the first comment congrates
@@youngchild9294 thanks kind sir!
Young Child gg
Vgg
Levgg
Jay!!!! If u see this can I get a like from u!! Let ur fans know u see their love for ur work!!
The weathering is perfect! Remember, Star Wars is a lived in universe!
Computer case made with automotive parts. Differential covers, radiators, all kinds of electronic parts. Jayz, dream the hybrid build.
Even with the 'It's just paint, nothing spcecial', it still looks a million times better that the whole RGB barf that they call 'modding' nowadays.
Sure, it's basic, but it's how modding's done best in my eyes: Unique, yet still fully functional.
Nice job Jay, I love these modding episodes.
I told you about the Silhouette Cameo plotter in the early Skunkwork days. In the sign industry masking vinyl is call sign mask and not vinyl. It has way less glue in order to prevent damaging the surface below. If you buy it from a sign supply shop it will be much cheaper than the hobby grade material like Cricut and Silhouette.
YOOO that microcenter employee in the ad with the long blonde hair is the same one who helped me collect all the parts I needed to build my system this holiday season. I believe his name is Ryan in Columbus OH. Was really helpful and friendly
Some orange LED's in the blast holes that flash on and fade would look good. Some minimal lighting in the vents blue or maybe simulated sparks could set it off.
For Star Trek themed you could do a Borg Cube.
Awesome mod. And phil is one of the best editors between all the tech channels
Please make more builds like these day, def one of my favorite videos
Wow! I enjoy seeing these creative and imaginative case mods. Glad you made one for yourself, after the Destiny 2 build turned out so well. I've painted and customized my own Thermaltake Versa N24 case a bit, w/ a "Fallout" theme, inspired by these videos.
That was excellent. I actually did a Star Trek themed build a couple years ago. Used NZXT S340 elite chassis painted grey/silver with NCC-1710-D USS Enterprise letters on it. Front rgb fans in red, two HUE+ light strips in blue to resemble the warp nacelles and the NZXT Kracken x52 AIO pulsing in blue to resemble the warp core.
Just as an FYI when you are using that Cricut to make your stencils and stuff the best vinyl to work with is Oracal 651 imo. It will make weeding the stencil and stuff like that 10000x's easier. And vinyl is WAY cheaper on Amazon. You can get a 12"x10' roll for like $8.
You got the Cobi Bismarck? SICK! That is such a good Lego model!