How To Get INAV Telemetry On Radiomaster Zorro
HTML-код
- Опубликовано: 3 фев 2022
- DO THIS FIRST:
1. Have INAV installed on a compatible flight controller
2. Enable "Telemetry output" from the configuration tab within the INAV Configurator
3. Enable telemetry for the receiver on your model (Crossfire/FrSky/ELRS etc.)
INAV Telemetry - github.com/iNavFlight/OpenTX-...
My Gear:
Caddx Peanut - tinyurl.com/CaddxPeanut
TBS Crossfire - tinyurl.com/crossfrr
Caddx Vista w/Polar Camera - tinyurl.com/caddxvistapolar
DJI FPV Air Unit (DJI Camera) - tinyurl.com/DJIFPVAU
iFlight Crystal HD Patch Antenna - tinyurl.com/CrysHD
DJI FPV Goggles V2 - tinyurl.com/DJIGoggzv2 
Наука
Super cool know what I'll be doing after school. I was using the regular release version but it wouldn't shut up with all the alarms happy you made this.
No problem, thank you
Thank you for the video. I appreciate that you don't use TX16 because today everyone use it for tutorials, but everyone cannot buy it or they opted for Zorro or Boxer.
thanks bro for the video... i got this on my radiomaster Boxer and working smooth cheers✌
This is awesome thank you. Just what I needed
Cool it also works on radiomaster TX12👌👍👍
Thank you! It works on my TBS Mambo!
Excellent!
@@grim-upnorth it's working great. The only issue am having is changing it to the imperial system instead of the metric. Since I live in the USA. So my OSD is imperial and the LUA in metric... all settings in my tx are saying imperial, but...
I figured out how to change from metric to imperial. It's in the sensors. Must update GPS speed and altitude sensors.
@@karlosfpv7619 Glad you figured it out 👍
thanks
Hey how are the roller wheels on your zorro? Mine are terrible I thought it was because I'm flying elrs, tried wide switch mode and swapped to crossfire still not very good. They zero at 1500 but roll to the right has terrible resolution left seems ok same on both sides Idk I probably have them setup wrong
I don't use the roller wheels I'm afraid, so I can't comment. ☹️
I got my Zorro already from HobbyRC, just waiting for the CRSF Nano casing. Feels great in the hand and have flown my indoor heli and quad with it...
I got the 4 in 1 version.....How you doing with yours?
I haven't used it as much as I'd like. Only hovered my 6" quad in the garden for a bit, testing the telemetry link. Weather has been too bad to fly annything bigger
@@grim-upnorth Yeah, the weather's abysmal, no sign of a let up either..sick of it TBH...😳🙄
I got the telementry already but some how i have lost the voice command.. for example arming or chnaging mode ???
Yes, I had this also. For some reason, when you have the LUA script running, it overrides the audio prompts with its own. I'm sorry, I don't know how to change that. I hope you can figure it out.
@@grim-upnorth okay thank might have to redelete and do it again or do the long why arming channel voice
HI will this works in Radiomaster Pocket?
hello, I have a problem with inav lua script, it constantly says that the battery is low on the quadcopter, how to set it up so that only the battery charge shows, and not the battery and 4.5v? Th12 and crossfire v2.
I don't know sorry. Perhaps you could ask the creators of the lua script on their git hub 👍🏻
friend, I figured out what my problem is. in the settings of the crsf nano rx receiver, you must disable the Rx Batt sensor.
After I clicked on discover new sensors, there aren't any changes. I've made sure the files are copied so what did I do wrong and what can I do?
There may have been some changes to the procedure since I made this video, updates to the files or inav config that I'm not aware of. If you followed this video exactly, and it still didn't work then I'm afraid I wouldn't be able to help.
Hope you figure it out buddy.
@@grim-upnorth before long pressing the MDL button, did you eject and plug the Zorro/its SD card?
@@spectrexfpv Once I was finished doing the actions on the computer regarding the files and folders, yes I unplugged the Zorro from the computer.
Can you also check that you've done the following before attempting any of this...
1. Have INAV installed on a compatible flight controller
2. Enable "Telemetry output" from the configuration tab within the INAV Configurator
3. Enable telemetry for the receiver on your model (Crossfire/FrSky/ELRS etc.)
This relies upon a two way communication between the radio you're using inside the Zorro (crossfire or ELRS etc) and the receiver installed in the model.
For crossfire - like I have - There is an extra wire I need to connect between the flight controller and the receiver. It all depends on which flight controller you're using, but there will be a pin for telemetry out, often one of the UARTs. This needs to be connected to the telemetry pin/pad on the receiver.
Hope this helps.
Nice vid! But on my commando 8 i dont have Telemetry button to switch on the screen 😭
Thank you, unfortunately I can't comment on the Commando 8 handset.
Is it for inav quad only? Or i can use it for my BF Quad?
As far as I'm aware, this only works for INAV telemetry, I wouldn't know if it works with Betaflight. Thank you.
what if i already have a script folder with scripts on sd card? Will new script folder delete or just add another script folder?
It will merge the contents of both script folders into a single folder. Or if you're concerned, copy the contents of the script folder into the one on the SD card
@@grim-upnorth got it works good thanks
Did you buy the Zorro / CRSF nano module deal?...🤔🤔😳🇬🇧
No I ordered the CC2500 version, as I already have a crossfire module to put in the back of it. All my planes and quads already had crossfire receivers on them, plus I have a few spare rx, so I didn't need the extra receivers that would have come with the bundle. I converted my crossfire JR module to a Nano module using the TBS conversion kit for $7 👍
@@grim-upnorth TBS sell a proper converter?....JR to Nano?
All I've seen is those terrible 3D printed ones😳😳😳😳🤔🇬🇧
I'm confused, can this be used along with the ELRS widget. Or can you only run one widget at a time..? Thx anyone 🙏🏻
I'm afraid I don't know, sorry.
@@grim-upnorth I've worked out you can run both! 👍
@@redogg2749 brilliant, great news.
I haven't been out flying for a long time, I only just got my Zorro out of storage the other day to get to know it again haha.
Why do i get Fuel Alarm all the time? And also how do i stop the 120m Alarm?
Sorry, I don't know the answer to that.
just reset the flight it will go away..
You can get coordinates with this script ? thanks
Yes absolutely, at 3:33 you can see when I activate the telemetry screen I've actually blurred my coordinates out for obvious reasons, but that's where the coordinates would be.
@@grim-upnorth awsome! Thanks!
Can we this with pixhawk
The LUA script is designed for INAV. I'm not aware if there is a compatible version for pixhawk.
@@grim-upnorth ok thanks
Damn RUclipsr, my remote data was lost, if you make the right content, if you're still learning, don't make it into content......😡😡😡😡