How-to add iNav Telemetry Lua Script to Radiomaster TX16s
HTML-код
- Опубликовано: 5 ноя 2020
- In this video I'll show you how to add the iNav Telemetry Script to the Radiomaster TX16s. With this telemetry script, you get an excellent graphical representation of critical data points.
In the case of roll/pitch there is an AHI (artificial horizon indicator). Battery voltage, vertical speed, compass heading, current draw, transmitter power, gps coordinates, and a gps map are also viewable.
This is a very trick setup and easy to do. Don't hesitate to try it out if you're running an iNav flight controller.
Link the the Telemetry Download: github.com/iNavFlight/LuaTele...
Like the work I do here? Join me on Patreon: / rcvideoreviews
Want to hang out with the RCVR crew? Join us on Discord: / discord
RC Pilot T-Shirts! teespring.com/stores/rcvideor...
Amazon Affiliate: amzn.to/3lEz5ZL
Banggood Affiliate: www.banggood.com/custlink/3DD... 
Наука
This guy really knows how to explain and teach you how to set up your TX 16 S he’s probably the best instructor on RUclips setting up your radio he explains it like a boss well done...!!!!!
I appreciate the kind comment. Glad to help.
I feel so stupid when I watch these videos. I will get it but this old brain is having a hard time absorbing all this. Thank you for what you do
I'm glad to help. There are definitely a lot of options for experimentation in the hobby. Don't feel like you have to conquer them all, just find things you enjoy and do that.
7:15 - thank u - I've been wondering how to do this for a while!
You're welcome.
This is awesome and really easy to set up!
You can change the widget settings when you’re on your actual widget page by pushing left stick up and to the right, then using the right stick to move around and select.
Yeah, thanks. I found that shortly after publishing the video. Good tip.
love it you a genius, in previous version of INAV I got into that menu with command sticks, and in the new version did not work in my new radio and I was frustrating because the alarms when off early and I did not know how to change it, I was blaming the flight controller, thanks for the new info.
Glad I could help
Excellent video as usual !!!
Thanks :)
I'm going to order my radio master very soon and i want that on my gear. i will refer to this many times i am sure. Thank you.
Enjoy your radio. They're excellent. Glad the video helped.
Your last comment about the ability to fly instruments only sounds fun. I would love to see you demo that, in a controlled and safe way of course. Take off and land? Good luck and thanks for the great video and insight into how technology is steaming ahead in the rc world.
I wouldn't take off and land on instruments, I would use this for what I call airline miles and that is to bring the plane back in the air.
@@RCVideoReviews I understand, it is great technology to be able to bring it back into line of sight and save a disaster.
Nice job
Thanks 🙏
Specific and useful info for an amateur. Cool.
Glad it was helpful!
Thank you! Very helpful.
You're welcome!
Thanks for great and easy-to-use video!
Great thing,if you add a log record procedure
Cheers!
SD Logging is built in to OpenTx. You can find it in Special Functions.
Note: I had to move the right stick to the left to save the changes, this is my main tool for flying long range, one time I was able to find my crash plane just with the last coordinated that the radio had.
Glad you got your plane back :)
Great how to John I have this on all my I-nav saved my planes and quads more then once
Take care
I'd like to hear about your experience using this in real life.
Great video thank u .
You’re welcome.
I have mine working and looks exactly like yours thanks to your help, the only thing it would be nice to know were my plane is by looking at this screen I would like to be able to fly to certain spot on a map and back, which flying back with this Widget is no problem just can't fly too a certain spot unless I'm missing something here, Thanks for all your videos
I'm not sure that's what they had in mind. Coming from someone who has flown a plane BLOS in years past, I can say this info would still be very valuable during a RTH. Glad you got it working.
I love all the info on my screen, I just wish that I could use for navigation, I'm wondering if you fly out beyond line of sight how do you know were your wing is? Thanks again
Thanks thats great
Glad you like it
Well Thank you from newbie..
You're welcome
thanks
You're welcome!
Thanks for the tip on setting the alarm thresholds. I searched for a long time. There is another item that I have not figured out. How do you get a map display onto the upper right section? I tried downloading map segments but they don't display.
John, interesting and very educational. By the way, are there any other options to crossfire telemetry for the TX16S that you are aware of? Regards
I haven't experimented with any other receivers so I can't say definitively; however, I would expect any Rx capable of telemetry should be able to send the iNav data back.
Hey I was just wondering if someone knows is there a way to put the home direction arrow on this widget? I'm going to be using it for a quad but just in case my goggles die while doing long range it would be nice to at least get a home arrow to guide me back till I could land line of sight. Thanks?
hi dear i have try inav scrit in my t18 with edgetx but i see only graphics value and not text lyke battery fuel level and these values are only shown when the battery of my quod are disconnected . what happens?
Great video. Is there a certain telemetry that tells us if INAV has a 3D GPS lock which allows arming of the motor? The satellite number next to HDOP doesn't always corresponds a successful arm.
3D GPS Lock as in > 6 or > 7 satellites? I don't think there's a 3D lock sensor; however, you can use logic to give you an alert. I believe Sats is the count of sensors. Use that value in a logical switch. L01 a>x Sats 6 Then a special function when L01 is active, play track "xxx".
You can easily access that menu when running as a widget just by using a stick command. Push the left stick to the upper right corner, there you go...
Good tip thanks. If you're reading: Up and right on the left stick enters the config menu .The right stick moves the cursor up and down, right stick moved right highlights the field allowing for changes with up or down. Right stick moved right again finishes the edit allowing you to select the next option. Right stick left exits the configuration menu.
Thanks for the tip...good one.
The intro music made me think I was watching a food wishes video.
I get that one a lot. Good riff.
Hi John, what flight controller are you using here and how did you wire up you crossfire rx? Thanks 🙏
It was probably an F722-WPX, but it's more about iNav sensors and the ability to send those sensors via telemetry to the radio. Crossfire is wired like any other Crossfire to BF/iNav board: Hot and Ground + Rx and Tx to a UART.
Hi does anyone know why I keep losing the battery voltage reading on my tx16s transmitter. I get a constant voice saying battery critical. Working fine one day then gone.. thanks. Using a r1 jumper receiver
Why the GPS coordinate doesn't show in the widget ?
Mine also does the same.
Is that because the GPS module doesn't support OSD ?
It's because I don't get a GPS lock where I film and if I did, I'd still blur it out ;) I do believe it shows up at the field though.
This ooks like a great feature! Quick question, I have crossfire, but do I need GPS for this to be get the most use out of iNav?
If you're using an iNav based FC, I'd think you would want GPS to get the most out of it. All of the nav modes and rth depend on GPS. I wouldn't get it for the script as much as the other functionality you get from the FC when GPS is added. You can get a BN220 for about $16.
@@RCVideoReviews agree Inav ment for GPS. Go hand and hand.
Thank you friend! Thanks to you, everything works. Some questions.
1. You have "150nz" written in the upper right corner. I don't have this label. What's it?
2. everything works very quickly and smoothly for you, the radio draws a lot of frames per second. I have not so smoothly, slower, somewhere 1-2 frames per second. What is the reason?,
My setup: inav260, lua172,
matek f405, softserial s-port, rx: jumper r1 16ch, tx: radiolink tx16s
1. 150hz is a Crossfire update rate and it's automated.
2. I'm not exactly sure because both radios use the same CPU. You might try upgrading your SD card. Also make sure to turn off sensor discovery if you haven't already.
great but is lipo batteries...and li ion? thx
Hi. I have followed your video and the iNav script is running nicely with the iNav "standard model" installed on my TX16s. The annoying bit is that if I change a switch such as SW A or SW D (back to the centre position) the Mode (Angle - Horizon - Acro) is spoken three times. Is that normal, or if not what may be wrong ? Oddly if the receiver (and thus model) is switched Off the Mode is only spoken once so the problem appears to be with the Telemetry script.
Not sure. You'd probably need to bring this one up with the developer.
in inav, with radiomaster tx16s, dji Google Caddx vista and ELRS 868 , I get an error in the Lua… why?
Please, I’m having a problem with the colors, the theme on EdgeTX interfere with the colors and the text is no visible due the same color, any tips?
Thanks
Very good video! Does this work if you have ardupilot installed in the FC?
Sorry, I don't use ardupilot so I don't know what--if any--data the iNav lua script will pick up from ardupilot.
@@RCVideoReviews Thanks! Maybe I have to try out iNav as well. Could be a fun project during the winter😀
Apparently the current inav.lua script on EdgeTX cannot be run directly by executing form Scirpts folder on sd card. It is meant to be run via the widget feature of EdgeTX. I got a nill value error when trying to execute as a script. I was told this by opening an issue on the github repository.
Hi I'm using tbs nano receiver and mateksys f405wing for fc. It should be capable of sending telemetry back to radio transmitter.
But I can't configure the wiring and INAV setting to do that telemetry thing to show roll, pitch and virtual horizon . Can you help ?
FYI all my servo and motor already working just fine.
Do you get any telemetry?
@@RCVideoReviews updated my quetions.
Yes I get the telemetry.
In telemetry page I can see my pitch, roll and yaw move when I wiggle the plane. But strangely it doesn't reflect in the navigation widget. It only shows signal strength. No moving horizon as I wiggle the plane. no battery voltage, coordinate etc
@@RCVideoReviews solved.
Delete all sensor then rediscover new sensors solve the problem.
Still error horizon ... rebooting both the model and radio transmitter fix all the problem.
Thanks
Pretty cool! What's the range though on an R9mm telemetry? I thought the R9mm rx was only 10mw as a telem tx?
I really have no idea. I don't own any R9 gear.
@@RCVideoReviews I switched to ELRS 2.4 getting better range than R9m
I love your videos! I've learned a lot! one issue Im having is when I execute the inav lua, it gives me a syntax error.
Sorry to hear that. On EdgeTX with the latest 2.6 and the latest iNav LUA it does work.
@@RCVideoReviews thank you for responding!
I do have edgetx 2.6
Hi John, is there an updated version of this scrip for edgeTx? The latest version appears to be updated in 2019. Or, is there another alternative?
Did you look on the Github? github.com/EdgeTX/lua-scripts
very nice video , I installed the inav LUA in my TX16s, I use Frsky receiver on a pixhawk, but I cannot get orientation data, the inav page basically not showing any data, any suggestions ? I am not sure does inav support mavlink which is used by PX4, thanks
Probably should let the iNav developer know. It's probably a sensor definition issue.
Thanks for this awesome video. I have one question; my current drone doesn't have GPS. Can I change the speed to MPH another way?
Not that I'm aware of. An airspeed sensor might show some information, but I don't have one with which to test.
@@RCVideoReviews OK, that's what I thought. Thanks for the reply and thanks again for such amazing videos. I'll be joining your Patreon.
@@HankSweeney Glad you find the videos helpful. Makes the effort worth it when I hear that.
One question. How do you connect up the Crossfire receiver to the flight controller to get telemetry?
Thanks
It's a simple 4 wire connection outlined in the FC manual. To use UART #2: Ground, 5v, Ch1 = Rx2, Ch2 = Tx2. Then in iNav you just set the protocol on the receiver page to Crossfire. Telemetry is sent automatically from there, just add the sensors on your radio. This page has a diagram showing the connectivity: www.mateksys.com/?portfolio=f722-wing#tab-id-4
Thanks 👍
Great video! But has anyone else had the problem where it won't show you or announce the modes other than Manual, Angle, and Acro? Any other mode like RTH or Position Hold just show up as ACRO. I'm using the TX16S with Crossfire Micro TX and Nano RX and MATEK F11WSE. All firmware is fully up to date as of 9/20/2022 and the iNAV Configurator shows that all the modes are being selected correctly.
UPDATE - I thought it was Crossfire causing the problem but found it's actually iNAV that's doing it and it's specifically this version: inav_5.1.0_MATEKF411SE_FD_SFTSRL1. I needed the softserial port for the DJI FPV Air Unit. But now I've connected my analog camera and VTX to the F411WSE board and I can see that iNAV is using ACRO for all modes except Manual and Angle. I need to see if I can find the right place on Github and enter a ticket.
I am using EdgeTX2.7.1, TX16S and Crossfire TX and I had the similar issue. When I set the baud rate for external crossfire TX equal to or smaller than 400K, the telemetry data only show pitch and roll data, no others. But if I increased the baud rate more than 400K, then the issue disappeared ... Not sure what is the cause...
Great video. So what is up with the upper right area where there is supposed to be a map. How do you set that to work?
I never did figure that out.
I did install on a separate page the mapping widget which is a full screen map and you can add the key telemetry elements desired. @@RCVideoReviews
Oh cool. Sounds useful.
can the radio voice all telemetry from inav screen? buy setting up values in special functions
Telemetry comes from the telemetry sensor. Voice prompts can be set to react to data values from the telemetry sensor. The script is merely visually presenting telemetry sensors. So, yes, whether or not you run the script, you can create voice prompts in response to telemetry sensor data.
Hi John
Just followed your instructions on installing inav telemetry widget. However the respince time on the screen when I mive the plane is like 12 or more seconds. Any thoughts or advise?
Only to ensure you're on the latest copy of iNav. If you are and this is a repeatable issue, you should open an issue with the iNav developer.
@@RCVideoReviews using inav ver 5.1.
just installed the INAV lua and everything is working 100%...thanks!
is it possible for this to make changes to other screens? My radio timer activated by the throttle used to be black numbers on a white background, now it's dim white numbers on a white background, very hard to see. How do I get it back? or change colors. crossfire/tx16s
Yes! There's some sort of bug either in OpenTx or the LUA script (I'm guessing OpenTx) that leaves the font colors changed. It happens on mine too. I haven't tried it yet, but you might want to try to "reset" the flight. Long press jog dial, reset, flight. Not sure if that'll work or not, but I've experienced similar discoloration issues with fonts. Rebooting the radio definitely restores the correct color.
Left stick up and right should get you to that little menu in widget mode...
Thanks John. I stumbled onto that little tip not long after I installed the script.
I have inav lua working on 2 different planes, only thing not working is the output power of the exspresselrs transmitter, funny thing is that in osd it's working just fine but on radiomaster tx16s screen it shows 0mw on tx output, also wondering whats the sensor name that provides tx out put power? Thanks for all your videos
TPWR is the name of the sensor for ELRS transmitter power. If it's not displaying correctly in iNav LUA, you may need to check with the developer.
Ok thanks will do
mine has weird black color and no words on screen, how do i fix that?
I just followed your video on upgrading to EdgeTX 2.7, Black Pearl, which was done in 2022. This Video was done in 2020. Is this compatible with Black Pearl?
The latest iNav Widget github.com/iNavFlight/OpenTX-Telemetry-Widget/releases/download/v2.1.0/LuaTelemetry_v2.1.0.zip loads and runs on Black Pearl. Whether or not it "works" using your sensors/telemetry/fc etc...I can't answer. It loads and runs fine as a widget.
Ok i add to my radiomaster and i see power tx signal rssi but my baterry have 0v. I search new sensor and the same. Whats the happens?
You probably aren’t getting pack voltage telemetry. Don’t mistake that for A1 and A2.
I don't know for what reason but the colors on my LCD change to very unreadable after running this script. What is the default theme to use for this script to work correctly?
To eliminate themes from the question, your best bet would be to use the default EdgeTX theme. I guarantee if the theme is involved, it would have surfaced with the default theme. Alternatively, check with the developer. Sounds like an odd issue to me.
My thing is very laggy. So it is not smooth. Do you know why? I am using Expresslrs
Hello sir .quick question will this work on radiomaster boxer? i cant find any inav lua script for radio master BOXER cant find any video on youtube .please advise thank you...!
No. This is for color radios only.
Will the iNav lua script coexist with the Betaflight lua script on the same radio?
I don't know. I don't see why it wouldn't. You could always back up your SD card and give it a try. If there is an issue, restore the card. I don't have any Betaflight configured devices at the moment, so I can't test.
I tried this and i got error, attempt to index a nil value. How can I fix this please sir. thanks in advance
Hi, my horizon (left up) rotates (roll) in the exact opposite direction to the plane in reality. Can it be changed?
I'd be interested to know if the pitch roll indicator in iNav/BF are showing the correct roll direction.
I’m having a theme problem, tho colors are all over the place and I can’t see the letters and details!
Anyone?
That "Fuel" gauge is confusing...
What is it reading? Battery percent? (but all battery packs are different)
How does it know?
Cheers from New Zealand and Kia Kaha!
In betaflight you can set the mah of the battery and your low voltage cutoff. The flight computer can calculate mah consumed with a current sensor, therefore the fuel % can be derived. Honestly, I don't pay any attention to any of that stuff. I simply watch my voltage. Depending on the type of aircraft, I get it on the ground around 3.6-3.75v/s
Excellent tutorial. I got mine working, but the update speed is very slow -- like a bit over 1 second frequency. So if I move my model, the AHI lags severely behind as to make that useless. Any ideas how to fix this? The top right corner of my screen shows 250Hz which is obviously wrong. It's more like 1Hz update speed.
Might have to check with the developer on that one. :(
@@RCVideoReviews I found out if I use Crossfire module then the iNav AHI smooth. But if I switch to ELRS then it becomes slow as I described above. A friend of mine has the same problem. We haven't found the solution yet but it's a start to tracking down the fix...
@@beyondfossil try turning up your telemetry rate in ELRS lua.
The Fuel value .. is that like in mAh or is it really fuel as in gasoline?
It has to do with the capacity of the battery and the amount of power used. Not fuel as in gas/nitro.
I have been getting grey hair with this one.
Got all working, on radio tx16s with working telemetry with jumper R8 to pixhawk 6 c.
But no value on distance from home or roll, yaw. Noticed on the telemetry list I do not have 0420 sensor for distance to home, or the 0430 onwards for the horizon graphic.
Do you have any ideas. I currently get it from separate osd, but want it on 2.4ghz
Regards
Dave Pope
Probably need to get on the iNav github and see if you can contact the developer. Hard to be involved with that level of detail on so many different possible setups/firmwares/controllers etc...If overall functionality works, the details will be down to the developer to help you sort out.
@@RCVideoReviews awesome thanks, love your video's.
I'm using this widget with EdgeTX 2.5 and the colors are all wrong. The background is blue and the text is not visible (also blue). Has anybody experienced this and perhaps know a fix?
have you found a fix? red words, black ground.. wtf? haha
I tried with crossfire nano rx and didn't work , i connect on a mxk f405 wing , with the tx16s , but didn't work ! Thank's for your good video , really help !
Glad it helped. So you got it working ok?
@@RCVideoReviews Inav on TX16s not working , , i check everithing and relisten your video to see what i do wrong !!
@@RCVideoReviews I finally go it , all work now !! My mistake was that i put the smartport to softserial1 , i changed it to uart6 and now it work good ! thank's for your help with yours videos !!
@@Joziebee hi greeting from me.
I have similar problem using nano receiver on mateksys f405wing and can't get INAV telemetry sent back to radio transmitter.
Glad you solve the problem.
Can you help me on the wiring diagram ? The wiring diagram from the FC to nano receiver to get this telemetry works ?
Thanks in advance
Does this process have to be done for each model in the radio?
Yes, for any model that has iNav and that you want the iNav telemetry LUA to operate, you'll have to add it. There are options though, you can setup one model and use it as a template for others. That's what I do.
Suppose I am interested in iNav. But not interested in FPV. Suppose I am interested in flying using Line of Sight. Could I use these LUA scripts to recover after losing visual orientation?
Suppose I take steps when mounting iNav Controller to isolate from vibration. Would this work when flying gasser airplanes in the 30cc - 100cc range?
Thanks, Randy
I don't know I would want to try and use a script to try and recover a plane after losing orientation. If I had iNav in a plane, I would rather just flick a switch and have the plane return to home or loiter while I regained my bearings.
If you're suggesting you can eliminate vibrations as a problem I don't see any reason the computer couldn't control the plane. You may want to check on the current demands to drive the servos and you may need to power them externally. As far as the airframe goes, the computer won't care what it's in so long as the airframe is supported by the firmware.
@@RCVideoReviews No I am not making that suggestion. That is actually my question. Are the typical methods used to reduce vibration in a gas engine environment, adequate to allow a iNav Flight Controller to work? Thankyou so much for the answers.
Looks like you could even fly relatively safe through the ahi in case of video loss during fpv?
That’s definitely the idea. I wrote a Kia script like this a long time ago but without the graphics. My idea was to fly by the numbers. This script definitely yields critical information in the absence of video.
@@RCVideoReviews Sounds good! Of course I would rather rely on RTH, I like having an additional safety layer. ;)
I have the screen working on my TX 16 but when I put on my FPV goggles I get a warning on the screen to disable navigation first, unable to connect. My Goggles are Fat Shark Scout. Do you have any idea what I'm doing wrong and why I don't have throttle control?
I'm not familiar with any error message that says, "disable navigation first, unable to connect". If you're using analog goggles, there is no interaction between the transmission/reception of data and the flight computer other than the overlay of OSD. In other words, there is no mode on the FC that can prevent video data from reaching the goggles. Navigation modes generally involve the GPS, so you may want to ensure you have a manual mode available and that it is active before attempting to arm.
@@RCVideoReviews it is showing on the screen it is manual mode. I believe I have something set wrong in my tx as when tested on another trans that was used previously with this model everything works. I had to load the iNav files to my tx so I need to check the files to see what is different, thank you
Question?
I guess the Fuel Percentage value on your screen, is really the Battery shown as a Percentage?
Thanks!
I believe it's derived from BF information where you enter the cell capacity and your desired cutoff voltage; however, I haven't really experimented with it so can't say for sure.
@@RCVideoReviews Thanks! I have not seen any information that has specifically explained how Fuel data is calculated.
Also, thanks for taking time to produce these great videos.
You’re welcome. Let me know what you find out. It probably wouldn’t be too hard to confirm with a little testing.
In the green part of the screen shouldn't be displaying a map?
If yes how do you display it
GPS has to acquire satellites. I don’t get a lock inside so no map.
@@RCVideoReviews thank!
I am asking because i think yapu you have to load the tiles yourself.
So iNav you don't? It will show the map when you lock satellite?
Hi, friend, I followed your instruction, and I successfully installed and run this script, on Sbus Frsky and Matek F765, everything seems working right , EXCEPT for that sensor called "FUEL", in my case, when I power up the plane, this sensor just start very slowly increase the "%" and its just keep increasing until 1200,,1205% etc etc and dont stop, even when the model is on the bench and nothing is running !! what could be wrong ? some parameters that need just adjust in editing ?, thank you and waiting for suggestions..greetings !
Not sure. Did you set an MAH level in betaflight/iNav?
@@RCVideoReviews I fixed now, it was two things , first, you have to set FUEL = PERCENT in the CLI, and second in the configuration tab, the field "Capacity" you have to complete it with you specific battery total mAh to use. And now it match perfectly between the values displayed in the OSD and the value populated in the lua script..thank you again !! for your videos
iNav is not an option on my widgets list. any thoughts? when I look in the widget folder it does say iNav.lau
Nvm, POWER CYCLE lol. got it. BUT I do have another question. on the right my crsf signal strength shows 1 bar ALWAYS.. even when a half mile out. thoughts?
I haven't seen my signal strength indicator on the iNav script while flying, so I don't know the answer to this one.
Fantastic video did you ever get the map working it’s not working on mine even with a gps lock
I haven't gone outside with it since I installed the script to get a GPS lock. I can't get a lock inside. I'll find out in the next couple of days hopefully.
@@RCVideoReviews that’s great thank you
Dose it works without crossfire, just with an telemetry supported receiver too
It should.
Hi mate, I got a very huge delay in the telemetry, using ExpressLrs EP2.... Do you have a clue about that?! THKS M8
What are your Tx settings? You probably have to increase your telemetry rate.
@@RCVideoReviews How do I do that?
Thank you for your video. I have radiomaster TX16s and Crossfire Micro TX II with nano receiver. I connected the receiver to f405 wing by sbus connection. I Discovered 10 telemetry data but in inav lua script only RSSI valu working. There is no battery, no pitch and yaw, no compas. What can I do? where is my fault?
Then I tried 4 wire crsf mode.
I connected
5v to 4.5V (SBUS)
GND to GND (SBUS)
CH1 to R2
CH2 to T2
but nothing change. I only discovered
1RSS, 2RSS, RQly, RSNR, ANT, RFMD, TPWR, TRSS, TQly, TSNR
Can you set your protocol to CRSF instead of sbus on the radio and computer?
@@RCVideoReviews Yes I set the protocol to crsf. But not worked. Then I used TX5 and Rx5 .Now it is working. I think f405 wing's sbus 4.5v, gnd, tx2 and rx2 not suitable for crsf or I couldnt set it up.
@@mehmetkeskin2469 Good deal. Glad you got it working.
@@mehmetkeskin2469 yep. Had the same thing happen to me on the 405.
Hi thanks for the video,
I got it working this far. The distance however stays on 0 meters no matter how far the plane is away. Because of that the arrow on the little map in the top right hand corner of the screen always stays in the middle.
I would appreciate if anybody could help me.
Thanks
Do you have working GPS?
@@RCVideoReviews yeah. Tim the developer of the lua helped me. I was running a version of opentx which wasn‘t able to work with my crossfire’s flight mode telemetry sensor. Thanks anyways
Hi, I added Inav Lua but the pitch axis is inverted, have you ever see such thing? When the FC pitch-up the telemetry is positive and when it pitch-down the telemtry is negative. Is there a setting for this?
Wonder if there's an issue with board orientation. Seems like your iNav setup is wrong to me.
I will try to wipe it out and reinstall it afterwards. Is your pitch telemetry positive or negative when your flight controller pitch up?
I don't have an iNav plane active at the moment. You'd be much better off joining my discord and asking there. discord.gg/jSFTASU
Will do thanks 👍
Hi, I have two airplanes in the RadioMaster TX16S transmitter using the Inav telemetry page. For one airplane the page is working OK in accordance with your tutorial. But in the other airplane the page is not working. The artificial horizon is not moving when I move the airplane and also the information like battery voltage, fuel and number of satelites aren't appearing. Could you help me? Thanks
I did the reset flight and reset telemetry and nothing happened.
Do you see telemetry data on the telemetry page of the radio? i.e. Discover new sensors...does that populate sensors and their data?
@@RCVideoReviews Yes. When I do discover new sensors it didn't discover the GPS
So you see sensors for attitude, voltage, fuel, but not number of satellites?
You may need to speak with the inav lua script developer on github. What I know is that when I have the sensors active on my model and then I activate the lua, the lua script works. If you have sensors and the lua script is not working, you'll probably need help from the guy who wrote it. There is no option to turn these things on or off that I know of within the script.
@@RCVideoReviews The Crossfire receiver was bad. The telemetry was erractic. Then, I installed a new one and the problem was solved. Thanks for your support. Cheers from Brazil
Does this work for ardupilot
Can this be setup on the DJI F550 hexacopter?
The LUA scripts depend on iNav telemetry. So the script will load, but no data will appear unless you're getting telemetry using the same sensor names the script expects from iNav.
Hello , is this lua script support Jumper T20 ?
Dunno, you'd have to check with the developer.
Does it works if Flight controller is Betaflight not iNav?
I don’t have anything with betaflight to test on. It only takes a few minutes. You should try it and let us know. I expect some elements might work and some might not. It’s hard to say.
@@RCVideoReviews It works with BF fc, at least for mine. Just tried it couple hours ago. Jumper T16 with Tbs crossfire micro tx v2
Can you explain how to do this on a frsky x20
Sorry, I don't use FrSky stuff.
Dumb question but can you use this iNav script on Betaflight configured quads?
You can try, but I would be surprised if it worked 100%.
Wrks on Betaflight
@@pornzi Good to know, thanks for sharing.
How to configure the hardware i mean i have Frsky X8R hiw do i wire up to Matek F765
Use s.bus. Matek has wiring diagrams showing how to do s.bus receivers.
@@RCVideoReviews I used sbus wiring diagram and inav telemetry 1.7.2 but Roll pitch yaw doesnt show up yet all other 20 sensor keep on showing and my Telemetry widget is actually not displaying any of the data
@@aesatishchaudhary5933 I haven't tried an s.bus setup in iNav, only Crossfire and all telemetry values populate while using CRSF as the Rx protocol. You might have to do a little reading to figure out how to send iNav telemetry via s.bus.
Oy. What FC are you using? thanks
That one is a Matek F722 WPX.
For those who are asking why? I ask why not?
Amen!
Yup why not.
Funny thing. added inav telementry and all my colors washed out and buttons disappeared. i just deleted and went back to normal. weird.
Yea, that is weird.
hello can you told me what i have to pay with radio and work for lua bcz i want order TX16s and Frsky L9R 9/12ch and FrSky Yaapu and Pixhawk PX4 PIX 2.4.8.. and HobbyEagle A3 Super3 .. thank you
The radio works with lua out of the box. This lua script is designed for iNav devices and the telemetry delivered by iNav to the radio. It will not work with just an L9R. You've also asked about 6 different questions between the Rx, YaaPu, iNav LUA, Pixhawk, and A3. I can't answer all of them here....
For the script in this video, you need an iNav device, a TX16s, and an Rx that supports telemetry.
The A3 is a stabilizer and offers no telemetry info.
The L9R does not support telemetry.
Yaapu is a LUA script for telemetry.
The Pixhawk PX4 is a flight computer.
You're kind of bouncing around on me a little. Please trim your questions back to something more manageable.
@@RCVideoReviews so what i have to pay the receiver 10 ch or 9
I think we’re losing something in translation.
@@RCVideoReviews Sorry i written wrong ( Buy) i mean.
It work for Radiomaster r168 reciver via s.port. OR not?
I haven't tried s.bus and this script, so unfortunately I cannot answer.
@@RCVideoReviews thank for reply, I'm not confident to buy.
R168 Specifications
Telemetry: S.port(smartport?), RSSI output, VBAT (up to 18V voltage detection)
R161 Specifications:
Telemetry: Supports flight control TELEMETRY & RSSI output
would the lua script work for EdgeTx?
Yes it does.
Grait video! One question. How to save changes, i have done?
How did you make changes?
@@RCVideoReviewsAs you described. In menu settings. I found the solution. After changes, it is nesessery to move right stick to the left and then repower the transmitter
Are you from ETA Prime?
I don't know what ETA Prime is, so probably not. ;)
I have emergency mode on my new radiomaster 😭 any help much appreciated pal
That normally means you pulled the battery out while powered on. Just turn it off and back on.
Mine did that on the initial boot up. But only once.
Look up flashing the real Opentx to the tx16s. When mine came from factory it kept going into emergency mode when running yappu script. After I flashed open tx never happened again. I think painless 360 made the video
This works with Edgetx?
I just checked yesterday and it does work with EdgeTX 2.6 BUT I didn’t launch a craft to verify sensors. It does load and run though.
is this script compatible with EdgeTX?
:) ruclips.net/video/ETtWE6A4Wo0/видео.html