How to Replace a Wheel Cylinder
HTML-код
- Опубликовано: 8 июл 2013
- Fixing Leaking Brake Wheel Cylinders. The wheel brake cylinder is vital to your drums braking capability. In this video I show you the process of replacing the drum brake wheel cylinder. It is easy to do and anyone can do it. It takes about an hour if you take your time.
Find inexpensive replacement wheel cylinders here: www.amazon.com/s/?_encoding=UT...
To learn how to change your drum shoes (remove the springs to get to the wheel cylinder): • How to Change Drum Bra...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ruclips.net/user/subscription_c...
-RUclips Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. 
Авто/Мото
Let it be known that this was the first video Chris started off with "hey guys" 7 years of great quality content, you are an inspiration
Thanks a lot!
That is historical. Great video.
So cute
How long did you spend figuring that out?
Chris fix, made this 7 years ago and it's still helping people like me everyday! Thanks for all your work Chris! Hope you're well!
Absolutely once it gets warmer I plan on replacing the drum brakes and wheel cylinders on my 2004 Ford Taurus 219,000 miles on them puppies !!!!!!
Yb@@patrickhall6831 m
Hahah thanks a lot. It was funny how many mess-ups I saw while I was editing so I had to add them for some fun lol! Glad you liked the video!
This is your first "hey guys" intro
Can you please show a video on how to replace a brake master cylinder please chris
Thanks man! And thanks for checking out the video! It is good to get feedback from people who know what they are doing (as well as people who dont). There will be more to come!
9 years later this is still coming in handy. My gfs car has drums and my new dd has them too. I ve done the drums shoes and springs before but never the cylinder. This takes out the guess work. Thanks again
Nice job on this video.
I replaced both brake wheel cylinders on my daughter's Saturn recently based on your instruction. Saved some real money. Thanks!
+hnkfsh81 Awesome! Glad the videos were helpful and you saved some money!
+ChrisFix love your method for bleeding brakes. hope that white shirt wasn't one of your favorites lol
reply
how much do they charge? Thanks
@@VinayakGovande if u don't mind me answering they were going to charge me $230.00 to change both rear cylinders on my vehicle.
10 years ago he made this video and it’s helping me today. I am grateful you’re channel exists and I’m happy I found this video.
I'm glad the video is still helping you today! Thanks a lot!
Thanks for the feedback! Makes making these videos worth it!
Great example how a DIY vid should be done! Well-edited, clearly explained each step, nothing rushed, well-shot. Thank you!
Jonathan Sherman Thanks a lot Jonathan. I try to make all of my videos like this!
Chris Fix = The official Chilton Repair Manual replacement.
*Thanks Chris 👍
Thanks for the comment and tips. As for the paper towels instead of the plastic bag; I prefer the plastic bag because the towel can become saturated and get onto your metal/paint.
the "Hey guys!" has gotten so happier and brighter over the years since the first one here. its absolutely awesome to see how far youve came
I'm working on my first car I got a month ago. Needed this video and some others. 8 years old and still very helpful thank you.
Thanks for the comment! I am glad I am able to teach so many people!!!! :)
Its been 40 years or so that I changed out a wheel cylinder. Thanks for the refresher Chris. Great Videos.
Thanks a lot! It's great to get feedback from such a successful company!
Hey love your videos. can u do a videos how to change brake master cylinder & do u have to bleed the brake when doing this. Thank you love your love videos keep up the good work.
Watching Chris's videos more than 5 years ago is like going into a completely different RUclips channel
Yeah the videos were pretty different back then!
Thanks man! Much appreciated! And if you ever need to fix something you know what to watch!
10 videos later and once again I should have just checked your videos first. Thank you so much for this. All the little tips and details as well, not just the overall replacement.
You should change and bleed each side once at a time. This will prevent excess air from getting into you lines and also if you need to reference where something goes, you can look at the other side.
I did this years ago , and probably the next 2 days, your direction refreshes my approach, thank You
Glad the video was helpful!
Good video. Especially high marks for nice, stable, clear, close-up views. That is so helpful for us guys that don't do this every day.
I appreciate learning this from you about it. I am a 55 yrs old deaf man who has the desire know how it work and how to do it properly. Thanks !
Old chrisfix: Hey guys.
New chrisfix: HEY GUYS CHRISFIX HERE!
Haha I wasn't as excited to film back then as I was now!
Great job on this . Thank you for the outtakes. Shows just how much added time and frustration goes into making one of these videos. Subscribed.
+cerial0411 Thanks and awesome! Welcome aboard!
Great mechanic and appreciate the bloops so we know ur not a robot. Anybody can do it.
I’ve watched all your recent videos and now I had to go back for this. Glad you made it
Love the bloopers at the end of the video. That shows that making these videos is a little harder than people think and how hard Chris works for a great final product. You deserve all your fame and fortune my friend.
Flare nut wrench, bro! They are crazy expensive but rounding one of those nuts on the brake line is "Game Over". I watch your videos even before I do maintenance work I've done 10 times before- your tips and tricks make me do it better every time. Cheers again, Chris!
John Daly
I wouldn't call $6 "crazy expensive".
That's how much singles cost at my local auto parts stores.
When you have to buy a whole set of them- yes, they are expensive. Crazy expensive, even.
+John Daly Your right flare nut or line wrenches are the way to go . home depot used to have them I think they were $30 ??? I would rather pay 30 bucks than have 300 dollars of aggravation
+John Daly It's like $9 for the set at harbor freight.
+John Daly I paid $9 for the set at harbor freight. At 7/16, he can probably get by without it, but it's still risky. The first time you round off one of those, you'll be hating life. Don't ask me how I know.
No prob! Glad it was helpful!
I’ve been watching Chris Fix vids for several years and this is the first time I have seen bloopers at the end. LMAO it was great. Compliments on the clear step-by-step explanation with tips and tricks along the way. Like how the progression of vids where you get more and more lively, enthusiastic, and entertaining over the years! You have saved me a fortune on car repairs already! Grazie
You are an excellent teacher! I don't know jack, but you really speak slowly, and thoroughly give details (wrench sizes, front & back views, etc.) Thanks!
Great video, I appreciate you telling us what to do if the brake line is rusted to the nut.
Just wanted to say how much I appreciate your work. 2 months ago I started getting interested in car mechanics and I couldn't have a better instructor. Are you planning to do some ''theory for beginners'' videos too in the future? For example a video explaining how the coolant system works or the brake system. You cover it sometimes in your videos but doing one video of ''basics'' for each section would be awesome.
I'm saying this because - for instance - as a beginner I had to watch a lot of your videos (and other videos) to fully understand what you're doing in this video and not just apply it.
Thanks again and after spending several hours watching cars' ''how to'' videos on youtube I can tell that you're the best.
Keep it up!!
I've been waiting weeks for someone to change the brake cylinder for my Pt Cruiser, after 2 months I come across this video and feel like you've explained it well enough for me to try it myself. Thanks for making such an excellent step by step video!!
Diana Lopez-Rodriguez Awesome! I am glad the video was helpful Diana! If you have any questions, feel free to ask! Get some penetrating fluid on that bolt that connects the brake line to the wheel cylinder so it comes off easily.
Thanks for all your videos. We can count on good lighting, detailed instructions, and a variety of subject matter! Good to see your human by showing us a few outtakes!
If I'm worried about cross threading, I turn the nut backwards with my fingers, until I can feel it seat. Then tighten with fingers, and don't put a wrench on it until your certain the nut is on.
Great tip!
That's what I do too.
Dont breed the brakes! What are you gonna do with all of them when they grow up, Chris?! LOL, loved the bloopers.
+Luciano Narno lol
ChrisFix did it have a washer?
It's breed the blakes
Just goes to show how much work and dedication and detail Chris puts into each of his videos.
Hey again chris . Just a quick note to pass along to everyone based on what happened to me today when I was changing out the brake cylinders on my son's 93 accord. The compression fitting was rusted to the brake line like you mentioned could happen so I took the cylinder off with a small section of brake line attached. The fitting and the brake line were completely rusted together and I couldn't break them apart.I took a "bernzomatic" torch I got a few years ago at home depot and heated the fitting and after about 10 seconds I was able to break the compression fitting free from the break line. Had to do the same on both sides and it worked like magic both times. Thanks again chris . hope this helps someone.
***** Thanks for sharing Jeff! I am sure this will help a lot of people!
Loved the bloopers at the end. Thanks for doing all of the hard work of recording and editing so that you can help us know what to do. THANK YOU!
Awesome videos. So simple to follow and love the tips that are not included in books. I've changed my rear and front brakes with no issues. My car is pretty rusted so all those tips helped out. Thank you so much Chris, you've saved me a lot of money! I don't know if you realize how great of a public service your videos are but they definitely are! Keep up the great work!
Ivan Lopez Awesome Ivan!! That is what I like to hear! Good work and I am glad my videos have helped!
You're the best on RUclips. I laughed my ass off at your bloopers at the end 😂😂
Haha thanks a lot!
+ChrisFix I've got a Mazda protege would it be pretty much the same? if you even see this comment thanks
Thank you so much. You made this very eazy to do. I loved that you used terminology that anyone could understand. Once again thank you. Great job!!!
Thank you so much for your help. I rebuilt my brakes on my 91 gmc suburban R2500 and it was so helpful my problem was there was so much rust built up on it it took me a week to break it loose and no power tools snapped a lug bolt in the process but achievement unlocked lol really loved your video and loved how straightforward it was 😄😁
Thanks for the video! I got real insight on what it takes to breed the blakes.
Hi Chrix, Thank you for this excellent video. I really appreciate the great details you show in the videos.
No problem! Glad the videos are helpful!
I've watched a lot of how-to videos one various subjects. This has got to be one, if not THE best I've ever seen. Thank you very much.
Chris makes the best videos! To the point, accurate and perfectly paced.
The bloopers were a crack up! Reminds us that no matter who is working on a vehicle, it's almost never a smooth operation.
Tommy Rad Haha, glad you liked it! Yea, I forget English when I film lol. Probably too many things to think about.
+Tommy Rad Brake bloopers lol. I give Chris credit, I would be a lot worse. I can explain things well if there is no camera around me but as soon as I know I am being filmed, my lips turn into rubber fish and can't say anything right.
SnS PC
LOL, I know exactly what you mean. I studied Jazz comp/improv for years, in the privacy of my bedroom, playing with my dad on sax. I was asked to do a gig and was excited about it. I got on stage and completely forgot everything! EVERYTHING. To the point where, if someone asked me what was hanging on my neck [guitar] I would have looked at them as if they were speaking Martian slang. I laugh now but it was pretty traumatic at the time. Total choke! LOL
Great! Good camera work too, very clear. Thanks man!
Ryan Lynch Thanks Ryan. Glad the video was helpful! Definitely consider subscribing! New automotive 'how to' videos every Thursday and most Mondays so stay tuned!
I've watched several youtube videos on auto maintenance and repairs, and yours are the best by far, you are an excellent instructor. Thanks for making them.
Thank you for the feedback! I am glad you are enjoying my videos and I strive to make them the best!
I absolutely love the whole outro bloopers so you can breed the Blake's and a brake renovation. 😆 😂 Great video Chris.👍💯
love the bloopers . its like you forgot how to do it and had to pause to go to youtube to look it up. lol
+chris smith hahaha
Haha thanks a lot! Glad it was helpful! I guess I wont have to use my toaster to film in the future videos lol. If you havent, give the video a thumbs up, it helps me out! Thanks!
Thank you for this video. My car did the exact same thing that your truck did. When I pressed the brake pedal it started squirting and I tightened it. My brakes feel much better now. Cheers!
Thank you for the effort you put in to this video Chris. I liked the bloopers too lol.
one of the best feelings when a bolt go's in all the way when u finger tight
lmao the bloopers was halarious
Thanks Chris. Your instructions are very informative and hopefully I can save some serious money! I have to replace both rear wheel cylinders, brake hose line, and brake master cylinder. So I will let you know on the outcome.
I am a seasonal Mechanic. I wwas looking for something else but took the time to watch your talentes. I loved the entire how to video, because there are people who watch and don't realize you said CUT do it again .
+Steven Griffin thanks!
Thanks Chris! Do-it-yourself'ers unite!
Wasn't to bad ! I didn't even curse once :D
Travis Devereux haha, I like how that is how you tell how bad the job is!
BLOOPERS WERE AWESOME TOO!!!!!
Mindy Hull haha, glad you liked them too!
Wow the difference in videos till now is crazy. Thank you for helping me throughout the years
Thanks man. This is one of my favourite subscriptions.
lol like the bloopers!! lol
+allen Henry lol thanks!
"Brake renovation"??? That was too funny.
eres tu primo
I just got to say even though most of your vehicles you're working is a ford. All my ate chevys but you go through so much detail I learn more from you then people with the same vehicle as mine.. thank you so much for taking the time to fully explain and show everything
Thanks to you tube and guys like you Chris, I saved money and a lot of aggravation with waiting on a mechanic! And thank you so much for showing us how to bleed our new wheel cylinder! I hit a problem with my master cylinder going dry. I have 2 compartments to mine. One is for the front and the other is for the rear. Well I assumed the bigger rear cylinder was for the rear wheels so that is what I monitored. ! Wrong! lol The front one which holds very little fluid actually controls my rear wheels! So your tips on bleeding was a God sent! Because at first, I had no brakes and the light was on my panel. But now, it's all good thanks to your video! :) Here is a tip. If your master cylinder has two areas, better watch both of them to start going down on fluid level!
NEVER USE A REGULAR WRENCH OR OPEN END METRIC/SAE WRENCH ON THE BRAKE LINE BOLT CAUSE THE BRAKE LINE BOLT WILL ROUND ON U VERY EASILY. THEN YOU'RE IN A WORLD OF HURT. USE A LINE WRENCH....THATS WHAT THEYRE CALLED.....THEYRE MEANT TO FIT AROUND A LINE BOLTS LIKE THE BRAKE LINE BOLT SO THAT U DONT ROUND IT OUT BY STRIPPING IT
Kiddro22 Thanks for the tip!
Flare nut not a bolt
If you prop brake pedal down just an inch or two you will not get much brake fluid gravity feeding down to your open line.
bottmar1 That is a good tip! Thanks!
Your video helped me out quite a bit man. I just got done gutting and rebuilding rear drums.
Absolutely amazing! Bloopers are always a sure sign that everything went well in the end. Great video! I already know how to do this job. But! There were alot of nice tips and ticks involved that I'll take into consideration next time I'm doig this work! Thanks alot. I really do appreciate it!
I think you should use gloves...
Nitrle gloves to keep brake fluid off your hands. Brake fluid will remove paint so not so good for your skin. Use a funnel to fill master cyl also. Don't start a circus act trying to pour brake fluid into master cyl w/o funnel. Eventually, it will make you sorry when it's too late.
The extra bonus at the end was pure gold.
ChrisFix, Your videos are excellent. Thank you for the detailed descriptions, the what, why, how and when.
Hi there Chris,
Yesterday I changed the wheel cylinders on my wife's Hyundai Atos after watching other guys videos. I'm sorry that I didn't see this one of yours.
The procedure was pretty much the same as yours, but your video is much better with much clearer steps. Thank you so much for all the help that you have shared with us.
I've watched quite a few of your videos and also changed out my front rotors and brake pads on my Nissan Tiida last year.
Keep up the videos, they are a great help.
Kind regards to you.
I watched your video on how to changed drum brakes and was able to change mine! I made a mistake by not replacing the cylinders though, and now they are leaking. So I'm gonna use this video tomorrow to change those. Thank you! Your tutorials make everything so easy.
Your videos help a lot, thanks for your uploads. Much appreciated.
Clearly you know what you are doing mechanically. Your videos are better than any training videos I have watched to learn my trade in working on fast jet aircraft. These are good enough to market. Thank you
+John Garroch thanks a lot John!
A calm and gloveless Chris Fix before his ultimate evolution
I know you would have used a line wrench these days... lol But you been here since the beginning giving up the good info. Changing the world 1 video at a time. Thats what the internet was made for.
So well done!!
I appreciate the closeup shots!!
Great job on the video.
Your videos are getting a very professional tone. I've changed many brakes over the years, so I didn't see anything new. But because I found your video entertaining, I watched the whole thing. You're on a roll. Keep it going!!! I look forward to your next.
Chris makes fantastic videos, very well explained, with video work that actually shows step by step what to do. Thank you.
Hi Chris, Once again thanks for a great video. I followed your video and was able to do a complete brake rebuild.. Wow!
This video will come in very handy this Saturday. Have to change my cyclinder out on my 2005 Scion XB. THANK YOU very much
Ive got to say ive watched ALOTof videos on car repair and he has the BEST ive seen so far, the videos are clear and precise... really cater to the do it your selfer like myself.... he has the camera close enough to what he is doing so u really understand the process... PROPS TO HIM..... all the other videos ive watched are so far away that u cant really understand what they are doing.... THANK U SO MUCH, anything else i have to do regusrding my cars i will be watching him for tips.....i subscribed to his videos, ive never bothered to subscribe to anyone before, let alone comment on anything....so that is saying something for this guy.....Im looking forward to watching future videos, i just bought a 1995 chevy lumina as a 2nd car and im in the process of trying to get it road worthy, this video helped me immensely...thank u
Mindy Hull Thanks a lot Mindy! I am glad my videos are helpful and you like them! Glad you subbed as well!
Excellent detailed video. Chris does a great job with his videos!
Great job. After watching your video, I plan to replace my own leaking wheel cylinder. Thank you so much.
Thanks a lot! Let me know how it goes!
This is a very informative video the bloopers are hillarious
I like these older videos just as much. I was about to jump for the volume before you started yelling HEY GUYYYyYsSS!
love the newer enthusiasm, though I gotta watch my speakers before I click
As always, simple, clear and awesome. Chris your amazing.
Yesterday both my back wheel cylinders on my ranger i only had front breaks it was raining and caused a little accident, but now after limping home i go strait to your channel and as always, you have what i need :)
***** Sorry to hear that but I am glad my video will be able to help you!
Great instructions! Gave me the confidence to give it a try and be successful, thanks a lot man.
Haha the bloopers were really funny. You always make and explain everything seem so easy. Good to see you're actually human. Thanks for teaching me to renovate my brakes 😂
Nice video explanation, easy to listen too and to follow. One thing you might want to consider telling folks (or folks can read here)... it's best to use a line wrench on those brake line nuts, as the are super soft and can easily round over. For folks who don't know, a line wrench is 'almost' a box wrench, with a small opening where it can fit over the line, and it grips the nut on 4 sides, instead of just two. Definitely a DAMHIK issue!
I really like all your video manuals, thanks from Russia, Yakutsk!
Great video, very informative with simple instructions even I can follow.
Excellent video. I'm on my way out now to replace the drum brakes and wheel cylinder on my 98 Chrysler Cirrus!
Excellent process and very clear instruction step by step.
Thanks to Chris. The Best of The Best.
Nicholas Pham Thanks man! Glad the video was helpful!