Surface the Onefinity Spoilboard

I cut my oversized Spoilboard. I surfaced my Onefinity CNC Spoilboard using a 1 1/8” surfacing bit. I was able to flatten the Spoilboard bigger than the normal cut limits of the Onefinity Woodworker CNC. I use Vectric VCarve Pro to design a Spoil board surfacing file.
Check out the video where I design the surfacing file: • Oversize Your Spoilboa...
Spetools spetools.com/?ref=q38iqmqd9s Use Code DOUBLERENO for 16% discount
Here is a link to products I used from Amazon: (Affiliate)
Dust Deputy2.5 Deluxe: amzn.to/3S4MH0K
Easy SMX Joystick Controller: amzn.to/3CHVsX6
Insignia 24” TV amzn.to/3s139U0
Wireless keyboard Mouse Combo: amzn.to/3wq1BWX
Monitor Mount: amzn.to/36fQggV
Makita RT0701C Router: amzn.to/35Y8qE9
Vacmaster Beast Vacuum: amzn.to/3656pWC
Fulton Dust Collection Hose: amzn.to/3JeRuHL
Fulton 2 ½” Hose Clamps: amzn.to/3tWUPVv
Amana Surfacing Bit: amzn.to/3MSTB6f
3M Worktunes ear protection: amzn.to/3tfwA5G
Double sided woodworker tape: amzn.to/3KGEuLo
CA Glue and accelerant: amzn.to/3iavfqQ
Social Media:
Facebook at / doublereno
Instagram at / doublerenowoodworking
rumble.com/c/Doublereno
Twitter at / fractalburn
Pinterest at / doublereno
#Vectric #Onefinity

[@justknots2050]

like the camera shot from the router

[@doublereno]

Thanks!

[@bclp52]

I appreciate you sir , I have been searching for videos of this machine in action and not just talking next too it. Your content thus far is the best.

[@mitsuracer87]

Can the cnc just be mounted straight to a piece of MDF, and use another piece of MDF on top of that as spoilboard? I would likely just double side tape all my pieces to the spoilboard rather than use the t-track. I don't have a way of cutting the thin spoilboard pieces accurately like you have.

[@doublereno]

Yes you most certainly can, problem with stacking them is you will lose some of your up and down or ‘z” travel, only a problem if you are trying to do thicker projects