I Tried "WORTH STRINGS" on My Favorite Ukulele ... I won't keep them.
HTML-код
- Опубликовано: 2 май 2022
- 🎸SONGS I PLAYED IN THIS VIDEO
Luna - • Simple Ukulele Fingerp...
Spanish Melody - • UKULELE LESSON: Simple...
🎸LEARN SIMPLE FINGERSTYLE CHORDS
bit.ly/3idGNKd
🎸MY UKULELE COURSES!
www.ourpassionformusic.com
🎸FIVE UKULELE SCALES YOU SHOULD BE PRACTICING RIGHT NOW
• Five Ukulele Scales Yo...
🎸FIVE FINGERPICKING PATTERNS YOU SHOULD BE PRACTICING
• Five Ukulele Fingerpic...
🎸FOLLOW ME ON INSTAGRAM!
marcocirill...
🎸IN THIS VIDEO
I finally tried "Worth Strings" on my tenor ukulele. I love them, but there is a problem!
©Copyright
All the music posted to this channel is created by and belongs exclusively to Marco Cirillo.
PLEASE, DON'T SAMPLE THE AUDIO FROM MY VIDEOS.
VIDEOS AND SONGS THAT USE SAMPLES OF MY MUSIC WILL BE PROMPTLY TAKEN DOWN FROM RUclips, SPOTIFY, APPLE MUSIC, ETC.
If you like my music and video lessons, feel free to share them, but please, don't create, distribute, and sell samples that include audio from my videos. 
Видеоклипы
I have just looked back on your other ukulele videos Marco and checked the strings supplied on the manufacturers websites and The Makai had Aquilla Nylegut originaly .The Journeyman also has Aquilla Nylegut ,and so dose the Anuenue Supa Lani .and you changed them for a low g Aquilla set .So you seem to be very used to Aquilla Strings . I know loads of people rave about Worth Brown Strings ,and I have changed some of my Ukuleles To Worths but I think I prefer the Aquillas .I dont know weather its because at the time I got my first ukuleles most of the ukuleles out there were supplied with Aquillas . I have got used to them and like the sound .For low G I just change the high g string for a Freemont Squeekless Low G its a single string so I dont have to change the whole set.I also like Living Water Flurocarbon Strings By Ken Middleton. As far as visually Aquillas are a lot more visable than the brown strings .Strings are such a subjective topic and there are lots of videos comparing them some of the best videos are done by Alex at Southern Ukulele Stores in The UK and comparison ukulele videos as well. I can't wait to see and hear you play your new ukulele,you should do a video showing us and playing all your ukuleles.I personally think you could play a ukulele strung with rubber bands and make it sound wonderful.
It depends on the specific uke (size and design/solid or laminate) and the wood used (e.g. mahogany, spruce, koa, etc.). Also, the material of the saddle (bone, plastic, ebony, etc.). You can, for example, boost the treble a bit using bone or boost the bass a bit with a plastic saddle. You can also boost the treble using fluorocarbon or boost the bass using nylon strings. It's all a combination of things. On top of this your playing style (using thumb, finger, fingers nails, playing hard or softly, etc.) will also have a significant effect. In short, there's no one string-type for all.
Hi would you know what kind of Ukulele Taimani has got when playing her Phantom ...I think it's a tenor...Kanilea..koa wood..???
I really like the worth strings. Beautiful blend of sound.
I am trying the clear strings soon!
I’ve tried a bunch of different strings but I always come back to the Worth clear fluorocarbon
YeAh, they sound awesome!
I switched from Aquila reds to Worth BT-LG on my Kanile'a and I will NEVER turn back. The sound is full on the high, developed into a great low end, but has amazing sustain. From koa to cedar tone woods, it sings. Also, I have grown to dislike the noisy wound low-Gs that most string makers produce. That said, I get your point Marco, it's nice for us to see the strings. Thanks for making the "sacrifice"!
I will just re-inforce your
comment. I´m new at ukulele... but I`ve tried a lot of strings... Worth have the secret... sweet, bright, deep, colorful, all in one. I don´t want to buy them... jus want that you try them
♥
I prefer Aquila clear over Worth.
Hi Mario,
Some tips…
1-If you start by replacing string one then wind the string clockwise when tying the knot at the bridge.
2-If you start by replacing string four then wind the string anti-clockwise. The reason for the above is to have the loose ends turned in towards the remaining three strings - these loose ends can then be ‘locked down’ in the knot of the adjacent string.
3-When tightening the strings do it gradually and it is good practice to use your thumb and index finger in a squeezing and pinching motion moving along the string from the bridge to the nut.
4-On some ukuleles the slots in the nut can act as a ‘choke point’. To alleviate this rub a length of cotton with lead from a lead pencil and draw the cotton through each slot - this creates a dry lubricant for the strings to move freely.
Ian.
Wow Ian, thanks a lot for the valuable tips! I really appreciate your help. I didn’t know about. I didn’t know about tip 2. It’s something I never tried. Does it help to stabilise the tuning?
another one: never cut the strings when going to replace them. I feel sudden breakage as a destructive action. I think then they´ll go directly to the waste basket...you should think about recycling... they can be useful for other purposes, so keep them whole🤭
@@MarcoCirilloUkulele I would not turn it counterclockwise. Because the tuning than goes in the other direction which will confuse me. But when attaching the sting to the head I press the sting down to the head that the sting starts closer to the wood of the head and has a steeper angle. And sounds better in theory.
Good Day Marco
Excellent presentation on the Worth strings. I have a few comments.
I personally use the worth browns on almost every Uke I play regularly. That is about 5 from Soprano to Baritone. The mellow tone is the most pleasant part and it literally resonates best for me.
With that said I do also add a LaBella wound Low G to compliment the worth’s on several ukes.
I agree with you about the colors for tutorials. But…they have the same strings in clear - CT63 - which might work better for your tutorials.
Seeing the strings in your videos isn’t quite as important for me, but understandable from your perspective.
Thank you again for your lessons and demonstrations.
Cheers
UKEn
I’ve just bought a new uke with Worth browns fitted and I’m glad, as a beginner, that I learned the basics on a white stringed uke because the browns are nigh on invisible at first sight. Like the sound though so I’ll keep going. Thanks for the vids Marco, excellent educational content.
My favourite strings are Ukelogic strings Joel from the Hawaiian music supply has researched and produced these. They are available at the southern music store in uk although they don't seem to have the low tension ones which I prefer. Most of my ukes are strung with seaguar fishing line atm which is very similar to the ukelogic strings. Hope this helps.
I recently purchased a Kamaka long-neck tenor that came with Kamaka strings that sound lovely. I also tried Aquila (which likely were the white strings on your Makai) and Worth Browns. The Worth strings are difficult to see on a dark fretboard, but sound incredible. The Kamaka strings might be worth a try (black and thicker than Worths, so might be easier to see). BTW, if you ever get a chance to play a long-neck tenor, you might be pleased - much easier for fingerstyle (the neck is about 2 inches longer than a regular tenor). Thanks for your good work.
I like the Fremont Black Lines, they sound amazing on a Koa wood Uke. The Worth were a bit too dark for my taste. I find I need to hand stretch fluorocarbon strings before they settle down. It can still take a couple weeks for them to break in. Once they do they keep tune for weeks.
They are thinner since they are denser.
As a beginner, my first reaction was "oh no, I can't see the strings!" But I can pretty easily recognize the strings by looking at the finger positions. And the note sheets from patreon have always been a great help. So, I think I can adapt to looking at the dark stings. The mellow tone of the old strings is more soothing, though. If you really like the new ones, please keep them. I will stay in your uke family any way. 😊
Though I do love the Worth Clears and I use them on most of my Instruments, the string choice very dependant on the Uke. My favourites are Worth Clears, Uke logic, Anuenue Clear Water & D'addario Titanium. Also a tip for everyone who is into wound strings: try out a Thomastik Infeld D4 Guitar string to use as the wound low G and thank me later :)
How did you find the D4 string tips ? Is there some kind of logic behind ? (I'am just really curious)
@@marjob1694 a wound low G is of a similar gauge as that particular guitar string. I'm not 100% sure where I originally got that Information but I think it was in some Video Matt Dahlberg posted on his channel.
Ive tried a majority of popular ukulele strings out there, may favorite has consistently been anything from d’addario. They sound really good, pretty affordable and by comparison to other brands have been much smoother on the fingers. My main ukulele i use the titaniums and i use a low g with the clear nylon
I need the lesson that you played in this new strings
Hi Marco, I set up my sons first uke yesterday, and I really had to heave on the strings to get them to give. Not too much pressure, but for several seconds on each one. I deliberately left the E string to see if it made any difference, and that’s the one continuing to go flat. So yeah, it’s worth doing.
Nylon strings take ages ... don't give up lol
My favorite strings are Fremont Blackline Fluorocarbon Low G strings.
Dear Marco,
I own six ukuleles. They're all from different manufacturers and made from different tone woods. The conclusion I've come to, after trying almost all the different brands of strings on my various ukuleles is this. the ukuleles that have the soft dark tone woods like mahogany etc, on my ukuleles the Aquila nylon strings sound best. But on the ukuleles that have hardwoods and are naturally brighter sounding. I find that the fluorocarbon strings bring out the best in them. I think each kind of wood desires a certain kind of string. I don't personally adhere to the I always use brand XXX on all my ukuleles. Fine if that's ones preference. I think each tone wood has a string material that brings out its best qualities. And so far this formula has worked well for me.
I agree! Aquilas for ‘dark’ woods, fluoros for spruce and similar woods
I have a rose wood yamaha ukulele and I want to change my strings. Although the default strings are awesome but these black strings caught my attention. Should I change?
@@bongoosebondman7065
When it comes to strings, I am a restless/curious type. Given that one can buy a set of strings for $5-$10 a package, there is little that can go wrong that you can repent later by spending another $10 to go back to what you used before.
I own a Kala concert size ukulele made of Ziricote wood which came with Aquila Nylgut strings. I had seen so many RUclips pro players brag about fluorocarbon strings, I thought I would try a set. So I put a set of Martin M600 Fluorocarbon strings on. What a difference. It was as if the Ukulele had learn to sing on its own. It was such a beautiful sweet sound. I will never put nylon strings on ever again. The soyis too pleasing and beautiful.
On the other hand, I have an Islander mahogany uke that sounds beautiful and magical with the original Aquila Super Nylgut strings. On this uke, I don't want to destroy a happy marriage. It's perfect as is.
As your uke uses one of the brighter sounding woods, it may be a good fit for you. After trying several brands, my preference is Martin M600 ($5) or Worth Browns ($15-$20). I tried several of the D'Addario sets, but they didn't give me an orgasm after playing.
My thinking is that every uke has a specific type of string it want to on it. You just have to find the right one. I keep changing until I find a set/brand that seems like magic in my ears and hands. Good luck with your string and musical journey.
Hi.What do u mean by Aquila nylon. I realy want them, but I could only find bionylon or nylgut. I have a mahogany ukulele...
Nylon is my generic term for most Aqila strings. I use Aqila Super-Nylgut on my mahogany ukulele. I have not tried the Bio-Nylgut yet. I did try Aqila Red, but they didn't excite me, tho many people do favor them. I am curious about the Aqila Sugar strings and will try them next. It's my understanding that the lava strings are the same as the Super-Nylgut but just dyed black, which I might try on my bamboo uke just for the contrast (black on White look). I don't recommend you use the "New Nylgut" in yellow package. They are an older technology, cheap, thicker string that most people don't use any more much. They were essentially replaced by Super-Nylgut.
If I had any advice for you it would be to just experiment. I use Martin M600 fluorocarbon on one of my Kala ukes, cost=$4-$5. Most Aquila strings are $6-$10. Worth strings are more as they are imported from Japan. All that is cost of a cup of coffee somewhere. I simply try different strings until I find a combination that speaks to me, sings to me, and excites me. Trust your ears and your heart.
And happy days for you on your uke/music journey.
I'm guessing that the original strings were Aquila. I used to prefer those, but I switched to Worths several years ago, and I prefer them still. I thought the BTs in your demo had a richer sound - definitely liked them better than the Aquilas.
One of the main reasons I switched was that I liked the fell of the fluorocarbon strings better. Worth does not use any wound strings so you don't get that scraping sound when you slide a finger along it.
As far as practicality - yeah I get your point about visibility. Worth also makes a clear string (CT), which sounds a tiny bit brighter, and I use them on one of my ukes. They are more visible than the BTs, but less visible than the Aquilas.
Thanks!
Thanks a lot Antonio! I really appreciate your support!
How about using bridge beads? They essentially convert Tie End Strings into Ball End Strings. Ernie Ball makes Ball End Ukulele Strings which help with restringing
THank you so much. Yes they are hard to see. It’s amazing the difference that strings make. I was going to sell one of my ukes because I found it uncomfortable to play. At first I thought it was the uke, but on a whim I changed the strings to Aquila Reds and the difference was remarkable. So needless to say the uke is still here.
Second this. I was going to sell my Kala tenor as I was getting wrist pain (which I put down to an old injury) but a change to the Reds and it is the most comfortable of all. They are rather brighter than I anticipated but really like them at least they are making the uke usable.
Try the Pepe Romero's. I play worth, Romero's and Uke Logic. I think they are all great, but it depends on the instrument you put them on. They can get too bright. Also, I'd prefer to see the strings in your videos. Cheers!
I realize since the Worth Browns are new that this may not be fair to them, but I really, REALLY preferred the old strings. There was something quite special about the combination of them with that particular ukulele. I hope that you’ll be able to find another set of them.
I also preferred the white color of the old strings for ease of sight as you teach.
I really fond of Aquila Sugar, easy on the fingers
I love your lesson sir love from india
Hi, you have used the brown worth strings, I had the same problem, couldn’t see them clearly. So I changed to the Worth clear strings, so much easier to see against the fretboard.
Hope this helps, best wishes from Adam
High G, i use Uke logic fluorocarbon for G/E/A and Thomastik-Infeld CF-27 for the C
Low G : i add the Thomastik-Infeld CF-30 for the G
Very interesting. I always have trouble with the C string whatever uke I try. Dull and thuddy on the 5th fret.
First thing is:
The wonderful tone from your playing the makai. It's about perfect!
But you found out a flurocarbon is very desirable. Round. smooth.
The nylgut is bright snappy traditional.
But the change of strings is great rich even tone.
Marco could make a rubber band sound good. It's the major factor! Listen to him for some length of time you'll hear the great recordings . Fabulous touch. Perfect control.
The string is a warm / bright. Tone factor and a feel for the gauges .
It's all about the fingers. The soundboard. Then the strings.
You have to grow into new strings and new instruments. You love it until you hear something better!
Haha. Yes Marco could make a rubber band sound great 😂
As a beginner I have no idea really but just put a set of low G D’Aggio fluorocarbon on my Enya tenor. Sounds
Ok but then maybe I should practice more on a rubber band.
An amusing thing, I was listening to I think it was George, from the ukelele Orchestra talking about past band member Kitty who played on the same strings for 22yrs!
I love Oasis strings. I use a solid mango tenor ukulele
I have both worth brown and clear on my ukulele's. Having tried them both, I prefer the clear strings.
Same, I have the same uke as Marco and much preferred the clear, despite the brown being so highly recommended.
They sound great but the color could be an issue for your tutorials. My favorite strings are UkeLogic from The Ukulele Site. I’ve heard great things about strings from Alex from Southern Ukulele Store, too. Thank you very much for your advice and lessons.
I put a set of Ukes With Alex strings on my Millar TA-260G about 2 months ago and I absolutely love them. I moved to them from Worth Brown's Low G's and it was the best move I could have made. The playability is fantastic and I love the sound.
@@MD-ws1dg Awesome… Glad you found some that you love
I like the Worth strings but agree that they feel thin. Also, you are right, I couldn't see them on the video. I personally like Oasis strings which also are double length. They come I warm or bright.
Yeh they cut into my fingers a bit. and do feel very thin
Hi, if you want your strings to settle faster you can pull on them, closer to the nut and then closer to the bridge. Do that with strength (but not to the point of breaking them) a few times and your strings won’t budge or very little.
I think maybe a tune recorded dry (along with the ones where you added reverb) would help us judging the sound better.
Thanks for the video and your great playing.
With the worths strings it seems we hear much more the dynamics/ nuances of your playing.
For teaching online, yes white strings are better.
Hi, I have only been playing the ukelele for approximately two years. I try to practice for half an hour daily. During the two years that I have been playing I have tended to change strings every three months and so I was surprised to hear that your old strings were two years old. My question is how often should you change strings? To date, I have used Aquilla Nylgut and Aquilla Sugar strings with a wound low 'g'. The low 'g' tends to become dull as it ages. Thanks for your help and for your videos.
You should try “Silk and Steel” on your Baritone.
Dan Erlewine put them on a Gibson 1930’s nylon string guitar.
D'addario ej99 TLG are my favorite strings.
I just ordered my Makai LT-80 today 🙂 I was wondering if you ever went back to Worth strings on your LT-80 with the clear? Thanks Marco!
Cannot see the strings but as you said can see the fret and finger position so not a huge problem when I'm watching you tutorials. As for tone I'm watching and listening on my mobile so cannot really detect a lot of difference any way if you used old rope you would still make it sound amazing
Hello from British Columbia Canada
🇨🇦👋👍♥️😎🤡🐾 I have brown worth low G on my gretch concert and love them. Easy on my old hands
Marco, I also like the sound of the worth strings however as far as you teaching us I definitely don't see the strings. Thank you for all you do for us. God bless. 🎶
I know! I am replacing the strings soon ☀️🎸
It's really awesome to hear an honest review. Worth Stings sends out free strings to many large RUclips channels in the U.K. for free, so it's hard seeing a REAL non-biased video. The reason why I'll never use Worth's strings is because the company treated me poorly when I simply had questions for them and reached out to them.... Rather shocking at the time to be treated so badly by them. It seems that customer facing is not very important to them regarding any customer questions (regardless if they work professionally in music or not) that do not live in the U.K. Like the old saying goes "people will forget what you did, and what you said... But they will never forget how you made them feel...".
Please get over the bad experience with the people at Worth. I have used 10 different brands and I absolutely hear the Worths sound the best at all. Have a solid mahogany top tenor (it counts?)
Well that was rude of them...I won't buy them again then...shame on them...
I have worth fluorocarbon strings on my Kala solid flame maple tenor. I really like them. They are very bright, but to answer your question I can’t see the brown worth strings on your ukulele. I only see your fretboard.
I prefer the sound of the original strings. I bought an Islander MSC concert ukulele and tried 3 different fluorocarbon sets and the result was harsh sounding. Put on a set of Aquila Super Nylgut 103U strings and the sound was balanced, warm, with nice treble response. I think fluorocarbon strings get the ukulele too close to phosper bronze acoustic sound.
I'm debating between worth brown's or aquila reds for my 5 string concert. My 5 string tenor I'm getting comes with browns... Would like to hear your thoughts on the reds... They also have unwound low g string in the reds... I know you don't like the wound low g on your anuenue... Give the reds a shot and let us know! Reds would show up on the video ;)
Hi can I ask what 5string tenor you bought and do you know what uke Taimani plays in her Phantom ...rumble...
Try the light color worth
Does someone know what is the name of his old strings? Thanks
Can't see the strings. 😥 I do love that you are cognizant of how we beginners might be affected. Thanks for the great content. Always look forward to your videos.
I have never tried worth strings but I believe that they make the same strings that are in the video in a white color.
Hyy guys and Marco would you recommend aquila super nylgut string ?? I'm beginner soo please I'm bit confuse which is better 🙏🏻🙏🏻
I have play worth browns for 9 year but , I can see your point for teaching you need white as a can’t see the browns and they are thinner which would hert a beginner fingers 😢
You might consider adopting another string instalation method for a shorter settling in period. Carbon strings feel weird under the fingers and lacks the tonal warmth and complexity of nylon based strings. Personally I prefer Nyltech strings.
I just bought these to try them out also. It is not impossible to follow; but, it does add complexity to follow. The strings are invisible to me. Maybe the worth clear would show up?
Your son looks just like you. Very cute.❤
I'm not a fan of the Worth browns, and I'm always trying any new string I come across. The set up I prefer is Oasis Bright with Freemont Soloist Low G. They work well for my mainly picking style on a Pono mahogany tenor and Kala spruce top Super Tenor. I get around 2 months out of ant set of strings and change them then even if I haven't broke one. This morning I put on a set of Black Smith Cleargut strings which I had never heard of. I kept the old freemont soloist low G on as I didn't have a spare. The Black Smith are a little thicker than the Oasis and they stabilized very quickly, better than the Oasis and way better than the Worth. I did around 6 hours of practise today and I was impressed by them. They are not as bright as the Oasis, but they do have very good tone and there stability is a real plus. I have not tried the Living Waters strings yet, although I keen to try them, if someone could give me a web address for them that would be great.
I like the strings I just don’t think they are practical. I like how you mix strings though. I used to do that with my classical guitar but I never thought about mixing different brands 🤔 I might keep the high G brown though! I like the sound and replace the top three!
..does anybody know what uke and strings Taimani plays on her Phantom Carmen...bash..
Marco, I love your videos, love listening to you play. I’ve only been hacking at this hobby for a couple of years and hope to someday be half as good as you are. But I’ve got to ask, how long have you been playing and how many uke/guitars do you own??? I think at one time I counted around 12 or 15. Good for you! I’m into traditional archery and at one time had around 26 longbows so I know how a passion can overtake you. Keep the videos coming. Have you thought of making any music video albums? If you do please let me know. I want to be among the first to buy one!!!
Hi Joe! I started playing guitar when I was 10 years old so, a while back hehe. I think I have 25 instruments so far! Way too many 😂. Enjoy the lessons!
I don't see the strings and I totally understand the tone from the strings. I love the color, but its better when they settle in and I love the softer tones.
Ciao, io ho sostituito le originali AQUILA super nylgut con una muta di GHS fluorcarbon, all'inizio ero deluso perché molto più dure, taglienti e faticose da suonare ma dopo un paio di settimane ero felicissimo perché risultano molto più squillanti e vivide, un tono decisamente migliore e un volume finalmente accettabile. Devo anche dire che ho dovuto (e voluto) abbassare di un mm e mezzo il ponticello, l'osso vicino alla buca, ora sì che lo posso suonare con piacere delle orecchie e delle dita!
I have used Worth Browns and I think they sound bright, but as a learner, I found when I looked down to see where I was placing my fingers, I couldn't see them. And so I wouldn't advise them for tutorials as it's the same problem.
I have the same problem
I think the Worth strings comes in a clear variety that may be better for teaching.
Yeesss. I’ll try them this week!
@@MarcoCirilloUkulele I find the clear Worth to be even more bright than brown and very stable once broken in. I use brown on 3 ukes and clear on 1 and don't even consider other brands or nylon any longer.
I’m guessing your uke used to have Aquila Nylgut strings. And they did sound pretty on your Makai. They are thicker (nylon) and they are lighter, so easier to see. That said, I don’t need to see your string because I can see your fingers on the frets. As to sound, these have a brighter ring, while your old ones sounded a bit meatier. It’s a matter of preference. But if you don’t want your extra Worths, I’d happily take them off your hands.😉 Thanks for your lessons.
Hi Marco, I don’t need to see “string number”, Ukulele has four strings only, I can clearly see your finger presses 3rd string or 2nd or 1st even if you don’t have strings at all. But for you, as a teacher, maybe easier to ask kids (or maybe even adults) “press blue string” or “press pink string”, and there are such “Aquila” coloured strings for kids.
Personally, I can learn from you even if you don’t use glowing-in-dark strings lol ;)
Old strings sound very nice to me…
Another point of consideration: I had few cheap ukes with bridge detached after I put high tension Worth strings on it.
And third one: with HT strings, smaller in diameter, you can lower action even more. So it all depends… I also like Worth strings’ sound, but some other brands are softer by touch, come students may progress faster with other strings, I am not sure.
I don't know what kind of miracle strings you had on the uke for 2 years but on my uke after 2 months (maximum) the strings lose elasticity and that affects the intonation in the upper regions of the neck to a degree of unplayability
What is the name of the piece that you played at :28 a sweet and mellow tone piece….? I love all your videos…I just bought a ukulele last month.
On RUclips type "Simple Ukulele Fingerpicking Pattern with Amazing Sounding Chords"
Hi Marco, these are good strings but I can hardly see them. I'd definitely prefer to be able to see the strings, especially during the tutorials.
These strings look amazing, I think it is a good choice for personal use, like i would want to use them. But, you are right, for a tutorial video, not a very good choice. Thanks for teaching how to clean and add new wires, I learned something new today!
Thanks for making this video 👍 I am thinking on putting these strings on to my KoAloha KTM-10RP which is solid koa, the thing that is putting me of is the colour as I like to see my strings do they do them in clear or does anyone have any idea of good strings for me to use 👍🎵🎶🎼🤙
I changed my Aquila strings to Low-G Worth Brown strings on my tenor ukulele and it sounds SO MUCH BETTER. Worth Brown ukulele strings are fantastic.
I totally agree.. have had the exact same experience.
10:16 that was the first thing that 'hit' me as a beginner. Was brown Worth it?
I like them but they are not practical at all!
👍 the old white Aquila’s are much better for ‘instructional videos’
I preferred the old ones. They sounded beautiful and were vibrational. It was such a fine subtle tone.
the new ones sound dull to me in comparison they don't swing like the old ones. and it is no good to not seeing the brown chords. That's my opinion.
I will try the clear strings next week. I am sure they sound less bright!
I hung them on an old bamboo tenor so they are really visible....
Is the surface of these strings smooth/polished, or matt, slightly abrasive?
I tried Aquila Red strings, and loved the sound, but the whistling sound from the fingertips rubbing on the matt surface of the strings was driving me nuts.
I agree that the reds are noisier than most wound strings. They were also the only Low G string I ever had break…twice. Not a fan!
Worths are super smooth, the clear and brown
I think your old strings are Aquilas
I saw these but I didn't get them.
Marco... i play low G on my tenors exclusively. i looked forever for great low G strings couldn't find anything without a wound g string... always felt odd with nylon and wound together. don't last long either. But i found what i was looking for! Living Water Strings! made by a guy named Ken Middleton in the UK... all strings are flourocarbon including the low G's! they are incredible last forever, sound great and are all uniform.. right on the package it says "made in heaven" ha ha and they are... you should try them out!
oh yeah they are visible as well 😁
👍❤️🙏
Practical. No unfortunately. For tone yes there is a difference but it's not as sweet sounding and as your prior strings. Like you said maybe in a couple of months they will settle and give you a nice tone. But for me your Prior Strings for the 💯WIN in ✅Practicality and ✅Tone
Great video for learning How to Change Strings and Maintenance 👏
I Play Worth Brown and Fremont Black depending on the Uke. Both excellent strings. I am pretty sure Worth have a Clear version of the strings.
Regards
"Because they bring food to the table" ... I laughed so hard, haha!!
Jokes apar: I don't think I will be able to the strings in your tutorial. It's better to use the white strings at least for the tutorials. So yes, this new string is, unfortunately, not practical!
I think, to see finger position is enough.
I guess reading that cutting all the strings at once and having no tension on the neck is a myth.
True. I thought the same.
Rovex Mono Leader is cheap , soft and best .
🎶✨🧸✨🎶 👶👏🌴
I don´t see the strings. I play Flight strings actually. They are not so bad.
Nah can barely see the new strings...
So, you think they're not worth? Ok, I'm out... 😅