How to Install Paul Yaffe Monkey Bars on a Harley Davidson Street Glide Ultra Classic
HTML-код
- Опубликовано: 28 июл 2024
- Learn how to install 10" Paul Yaffe Monkey Bars on a 2014-2017 Harley Davidson Street Glide & Ultra Classic models. We bring you STEP by STEP through the process to give you the confidence to perform this job in your garage.
Click HERE to visit our website:
▶ hillcountrycustomcycles.com
Located in Austin, Tx, Hill Country Custom Cycles is a Harley Davidson handlebar expert that has been in business since 2002. Through years of sales of Plug and Play™ kits and custom Harley handlebar fabrication, we've come know the potential frustrations of installing new handlebars for your ride. With this video we hope to bring you some DIY confidence and save you time and money.
HCC aims to provide you with simple, yet high quality how-to videos and product reviews. Stay tuned for more and click HERE to subscribe!
▶ bit.ly/Subscribe_HCC_Channel
If you have any questions about, please comment below or email us at:
▶ CustomerCare@HillCountryCustomCycles.com
Or give us a call:
▶ (877) 755 - 4455
Check us out on Facebook:
▶ bit.ly/HCCustomCycles_Facebook
Check us out on Instagram
▶ / hillcountrycustomcycles
Thanks for watching!
- Your friends at Hill Country Custom Cycles
Disclaimer:
This video is intended for educational purposes only and is not a substitute for hiring a professional mechanic if you are not skilled or do not have the tools to perform the maintenance procedures shown. Due to factors and variables beyond the control of HCCC, HCCC cannot guarantee that the information provided is applicable to your situation or that it is complete as to all steps that should be performed. HCCC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. HCCC recommends safe practices when working with tools, equipment, or chemicals seen or implied in this video. HCCC recommends following procedures of the maintenance manual specific to the motorcycle and that only those qualified by prior experience perform the work shown. NO INFORMATION CONTAINED IN THIS VIDEO SHALL CREATE ANY EXPRESS OR IMPLIED WARRANTY OR GUARANTEE OF ANY PARTICULAR RESULT. Any injury, damage or loss that may result from use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not HCCC.
Just a few basic specialty tools and a bunch of know how and BAM.....easy breezy! That is the exact set up I would like. Nice work man.
I love reading all the, "why do you have to...?" comments. As well as the, "I'll pay $1200 at the dealer." Get a book, watch a video. Great video, by the way. You make it look easy.
Great video! Helped me to get my bars installed! Thanks
Finally found a use for those Crown Royale bags. Thanks for the brilliant idea!
+Jean Castillo anytime 👍👍
Bravo Bro...I'm embarking on this myself... 10in Yaffe on a 2017 Ultra Limited
You've done those before great lob sir great job
Ok. Thank you again
"tools required: 2 bottles Crown Royal (with bags)" This is a process I can get behind.
That’s why it’s called a bagger!
Great video thanks for sharing!
+Joe Adams you bet!!
I have a 2012 Ultra Limited that I bought 3 weeks ago. The previous owner was short and installed 2" drops which is too low for me. I want a set of 10" bars like in this video, but Harley wanted 1200 including the install.
Nice job, excellent!
Can you use the stock fairing mirrors with these bars? Or will they be on the way? Obstruct your vision because the bars are right at the top of them?
Congrats! good video .... nice explanation, regards, pandemonium, Cali, Col.
Thanks soo much for this video ! Im about to install 12" ape on my 2013 electra glide , do you think i need extended brake & clutch lines ?? Thanks 🙏🏻
great video so I definitely need new cables ? Thought anything 12 and under was ok?
On the front brakes, should you do the left or right one first?? Thanks! great video!
Thank you
Freaking clean
are you guys planning to do installs at Daytona Bike week (fall 2021 / spring 2022)?
Thanks already ordered bleeder and got phone call from customer service to confirm order..
I'm new never seen bars changed out. No never seize or loctite? Is it not required not even exhaust
Well done video.How long to do the complete install?
What size is that vent tube connector?
What kind of seat is that..my 08 is stock..no back support at all..that looks nice and high for my back.. Would love to know if they make one like that for my 08street glide
Hello, could you please tell me where did you buy your windshield ? And how many inches it size ? Thank you
Love videos
Hi can you help me out with something.. if I decide to go with the 10” bars would I still need to adjust the clutch cable and do what you did to the brakes ?
Can the 10 inch bars fit on a 2006 yamaha road star?
What is the diameter of that gas tank vent hose connector and where can we get one?
So if I purchased same exact bars without the pre-wiring (I’d use existing on ‘21 Street Glide Special), would that work using existing lines? I’m just trying to forgo the brake bleeding etc. it seems like that would be easier to me. No?
What seat is that
I need a set of those bars for my 16 ultra ill use my controls to save some cash but will need clutch and brake cable
We appreciate you watching! Feel free to call the shop so we can set you up with exactly what you need when you're ready. 877-755-4455 Thanks!
I have to do a bar adjustment on a 15 street glide. Is there enough room to get to the back 2 clamp bolts by just splitting the batwing? Never done one that new. Btw my personal bike is all HC. Ordered from you all yrs back when whole area was flooded.
How much are set of 14" in black to go on my ultra glide?
Hi i'd like to put an ape 10" on my street glide 2008
Must i buy extension cables ?
Thank you for answer
Same for a 2022 TriGlide Ultra?
Question on the extended plug and play electrical connections are they one piece or spliced in the handlebars ?
+Streetglide40S&W if we wire them up, it will be a 1 piece harness, so there is no connection inside the handlebars that could come out later down the road
So what your saying is that a new brake line connected at the ABS module will not introduce air into the line?
Just bleed from the front calipers to the master cylinder?
+J L correct
Why take the tank off? I have never did that.
after you have the new bars on how hard is it to move the mirrors to the top
+Gage Click there are already holes in your hand controls to put n mirrors like a Softail has. You just need to cover up the holes in your fairing when you take those mirrors ofg
"Easy" install. After watching this, i'll be spending $1,200 at the dealer.
🤣🤣🤣
bro i swear i was like wtf man this shit would take me days and i know if fuck something up, man acted like this shit was simple
😂😂😂
They charged me 3000 dollars for this Damm
Nicely done. Great idea on the vent hose. What size is the vent hose fitting?
+Rick Stannard a 1/8 or 3/16 should work
Thanks, I had the exact same question.
How long a install .Thank you for the video
+Mark should take 2-3 hours tops
How many hours did it take
Thank you bro, this video very helpfull...
Anyway, may i know, if using 14" handlebar, how many cm i must use clutch hydraulic cable?
How many cm i must use brake cable?
Please your advice 🙏
I have 08 streetglide..do they have plug and ride for that..? I went through this with a friend..I got the 13" rounded bars..he talked me out of doing the meat cleavers because harder to pull wires.
Im at very least novice..but Ive had fairing off twice..I think the hardest thing for me would be brakes.
+Bob Barker yes, we do offer it for that specific bike. Give us a call and ask for Freddy
My bar hits the console when turning right, Hits the tank turning left, Any reason ???? HELP
What was the purpose of removing the gas tank ? Looks like it could have been done without removing it .....?
🤔 I believe up to 12” bars, you can reroute and use existing brake and clutch cables. You’ll need wire extension kit though.
Another video I saw did that! I was wondering why he took bags, seat and tank off.
@@darinn8265 your right on a 2014 and up you can reroute
Can I use my stock clutch and break line for a 2014 street glide with no ABS...
I saw you loosening up the lines and you lost me there. thank you
yes I did, you will require the wire extentions to be safe
Po
on paul yaffes website it clearly states u can use all stock cables and wiring is this true or not true ????
+Mg Shizzle not true. It depends on the model of your bike and what size bars you are using
Do you loose visibility with your mirrors on 10’’ or 12’’ handlebars?
No it’s better
How many hours did this take you?!!
I don't have an ABS module under my right side cover on my '14 FLXH so I'm guessing this is a step I can skip?
That is correct
@@HillCountryCustomCycles
How much would pre-wired bars like that with the gorilla clamp run?
Waist time and a lot of money swapping out the cables. Can use stock cables up to 14” bars.
That's what I thought, too. No wonder he had to take off the tank. He was doing some stuff that was confusing and didn't provide the reasoning behind it
I'm getting ready to put 14 on my road glide. Not sure about the cables
+Brent Spencer What year?
2019 cvo. I have a complete set up on order with you guys. Funny
Outstanding Video, thanks for sharing....I want those Monkey Bars for my 17 SG. Would the processes you used for your SG be the same for my 17 SG? Thank you.
+Joseph L. Moskaly Yes, it would be identical. We have the monkeys bars in stock for that bike as well. If you have any questions, don’t hesitate to reach. Thanks for watching.
How much taller are the 10 inch Yaffe bars compared to the stock bars
stock bars are 8"
After watching this , I'm glad I have a Road King. My goodness working on the exhaust just to put handle bars on , ggg. Harley would want 3000.00 to do this job, gg
Drink a bottle of Crown Royal first then you'll have the bag for the master cylinder.
+Ringo Gingo AMEN!!!!
Can you buy just the bars wired with just stock black controls? Use my own break line and clutch cable.
+MARC Boov Sure can, give us a call, 512-264-7333, ask for Freddy
I wish I would've gotten a road king instead of a street glide... that fairing is a pain in my ass. I've had it off twice. The first time really was a shit show, but 2nd time wasn't so bad. I have cable clutch and no abs, so not as much of a pain
What's the point of removing ignition
How much are those bars w the controls already installed
+Chris Pearce the complete kit with chrome controls is $1495
Jesus Christ
Those look great, but they don’t look like 10” bars. They look more like 14”. They come up to the top of the Fairing!!
Easy my butt, LOL Harley here I come
Sorry can you explain why you need to all that extra work by changing all brake, clutch lines , etc... ? While simply we can just get the handle bar and use the existing lines and harness up to 14” bars. Please explain why all that extra work to make a simple handle bar change so complicated!
Hello, would like to know if you could install a set a 10 inch Paul Y Handlebars? And if I could make it on a day where I could ride down and you do it While I wait? Can I make appointment and what kind of price thank you you can PM me if you’d like
How many people are surprised on the labor cost on replacing bars thinking it was just 4 bolts?
👊🏾
How much is this exact set up. Thank you
+Mark you should probably check our website, but they usually run $1200-$1300. Keep in mind, all the wiring is a 1 piece harness and guaranteed against defects. It also comes with a new throttle sensor installed.
lol i think i will let the dealer ship do it lol i ordered the bars
why didnt you show me "fishing the wires through the bars" ? #Hardest part
This is true and why I was looking online. I did learn something about taking the tank off though. Much better than taking the dash off.
this is a great video, but i am sure this guy has done so many, that he can do this in his sleep, and makes it look a LOT easier than it is. THIS is the difference between a "pro" and an "amatuer"
in my opinion, for such a critical "life or death" component, if you don't REALLY know what you are doing (or have a tutor with you), i would NOT fuck with this as an experiment. the $$ or so you will pay a professional, will be WELL worth the peace of mind!
Lol, quick and easy? Seems a little more in-depth when I have my brand new bike in pieces.
Great video btw, I may try it.
+Ray Black Nah, just don’t get in a rush and watch the video as much as you need to. You can do it.
Hill Country Custom Cycles I just watched your 21” wheel and tire install. I’m going to start with that one! Lol!
you do not need to take your brake line off! this is not necessary and makes the job WAY more complicated than it needs to be!
Easy my ass yeah, after editing video looks easy
To change the handlebar, first remove the saddlebags ...
Nope.
Gonna buy a Road Glide instead.
Your mirrors are now useless because of the placement of the hand controls.
The title says Ultra Classic. What's up with that!!!!
It say's Street Glide & Ultra Classic models.
WHAT A ROYAL PAIN IN THE ASS.
No thanks, I'll leave it to the dealer.
How much taller are the 10 inch Yaffe bars compared to the stock bars
2”