Do I need to always select an "Option"...example (1) if I select the mode as "Auto" then do I need to select any "option"..??? Or could I simply press Start after selecting the "Auto" mode??
What are you adding to the Speed 60 to become 1:24? You say "I changed the settings" 50s into the video, but you don't demo how to do and undo these "settings" How do you delete added time to the 60 minute cycle? My cycle times have increased randomly over time. The Speed 60 is now no less that 1:38 (98 minutes) long. Like your demo shows the Speed 60 being 1:24 long. That's no "60" - that's a 74 minute long cycle. My Eco cycle grew from 1:45 to just now for no reason to 2:05. Is there a Hard Factory Reset on this pig?
It means you set the setting to add "extra dry" which increases the water temperature and rinse aid used to help the dishes get rid of water faster To change the settings, press on/off button to turn it on, hold on to A button( Normal button for my bosch 800 model), and press start button at the same time until the display shows d:01 or d:00 ... to change the settings back and forth using B button ( speed 60 button for my model) .... d:00 meaning you don't need extra dry, and it will bring your speed 60 back to 1 hour, but choosing d:01 will add additional 20 to 30 minutes by raising water temperature and using more rinse aid....... oh and last but not least , press the start button to save your setting
@owen33333 in the control setting, you can adjust water temperature, and how dry the dishes are, when you change this, it may vary the amount of time that it takes for a specific cycle to run
Mine too, Speed60 constantly reads 1:24. I’ve tried resetting, running hot water in sink prior to turning on, cleaning with a lime scale pod. Still reads 1:24. The lady at Bosch customer service was useless. Any ideas how to fix this issue?
@timbacchus I'm not sure, but can you please subscribe to my channel? After years of making videos I am so close to making it to my FIRST 100K SUBSCRIBERS!!
I consider half load to be 50% the amount of dishes I would put in to fill the dishwasher. That could be all dishes on top or bottom or some combination of both.
I put all utensils and remove the utensil holder to allow more room for dishes, pots, pans, etc. I know I'm late to the party but only recently came on RUclips looking to find out why my Bosch SilencePlus 44 dba dishwasher sticks so bad.
The dishes are dried and clean but the dishwasher is very wet. Is something wrong with mine? Thanks
You’re very welcome! Can you please subscribe to my channel? I will really appreciate it!
Delay is good to use also so you do not run the dishwasher at peak electrical rates.
@ThreeGreenthumbs I agree with you!
Great! Thank you! Can you touch on the red light? Our dishwasher’s red light is not turning on. But the dishwasher is working. Should I be concerned?
you're welcome! Can you subscribe to my channel? I will appreciate it.
I don’t know some Bosch machines don’t have that what is your model?
The handle that says Bosch 2nd shelf holds a finish tablet as well
Do you know what you're right? Can you please subscribe to my channel? I will really appreciate it!
How do you adjust the rinse aid amount used per wash
I accidently hit delay and can't turn it off. How do I do that. I don't want to delay
Good explanation, I enjoyed the video.
Thanks Bro-- nice job!
you're welcome!
Thank you so much!
You're welcome! Can you please subscribe to my channel?
Do I need to always select an "Option"...example (1) if I select the mode as "Auto" then do I need to select any "option"..??? Or could I simply press Start after selecting the "Auto" mode??
Options are indeed optional.
thanks for the tip
What wash mode will dry the dishes after they’ve been washed? The machine and dishes are wet after every load. Very annoying.
What are you adding to the Speed 60 to become 1:24? You say "I changed the settings" 50s into the video, but you don't demo how to do and undo these "settings" How do you delete added time to the 60 minute cycle?
My cycle times have increased randomly over time. The Speed 60 is now no less that 1:38 (98 minutes) long. Like your demo shows the Speed 60 being 1:24 long. That's no "60" - that's a 74 minute long cycle. My Eco cycle grew from 1:45 to just now for no reason to 2:05.
Is there a Hard Factory Reset on this pig?
It means you set the setting to add "extra dry" which increases the water temperature and rinse aid used to help the dishes get rid of water faster
To change the settings, press on/off button to turn it on, hold on to A button( Normal button for my bosch 800 model), and press start button at the same time until the display shows d:01 or d:00 ... to change the settings back and forth using B button ( speed 60 button for my model) .... d:00 meaning you don't need extra dry, and it will bring your speed 60 back to 1 hour, but choosing d:01 will add additional 20 to 30 minutes by raising water temperature and using more rinse aid....... oh and last but not least , press the start button to save your setting
@zebulonb2004 yes. did you ever figure it out?
Thank you for your clear explanation 👌👌👍
you're welcome! Can you subscribe to my channel? I will appreciate it.
@@DIYPinto yes subscribed
thank you!
@@DIYPinto I also recommend Cascade power dry. I have a Kenmore equivalent of the Bosch dishwasher.
thanks for subbing!
I use Auto most of the time and get supurb results!
thats good to hear
Excellent instructions!!!
Glad it was helpful!
How can I get the speed 60 to read :60 ? Mine reads 1:24 thanks
@owen33333 in the control setting, you can adjust water temperature, and how dry the dishes are, when you change this, it may vary the amount of time that it takes for a specific cycle to run
@@DIYPinto I followed the steps from aaronchen4841 below and got it back to 60, thanks
Mine too, Speed60 constantly reads 1:24. I’ve tried resetting, running hot water in sink prior to turning on, cleaning with a lime scale pod. Still reads 1:24. The lady at Bosch customer service was useless. Any ideas how to fix this issue?
Bosch dishwasher drying
yes
Mine doesn’t with extra dry. Nothing is remotely dry.
Is half load just the top or bottom?
@timbacchus I'm not sure, but can you please subscribe to my channel? After years of making videos I am so close to making it to my FIRST 100K SUBSCRIBERS!!
I consider half load to be 50% the amount of dishes I would put in to fill the dishwasher. That could be all dishes on top or bottom or some combination of both.
On my new GE dishwasher the half load is only for the top portion. The bottom wands are off.@@geriegan8076
Have you use the intensive drying setting ? What does it do ?
@alvarezz09 intensively dries
I use the top drawer for utensils. The rack is supposed to hold the items between the vertical holders…
Does anyone else do this?
I do that sometimes. Can you please subscribe to my channel? I will really appreciate it!
I put all utensils and remove the utensil holder to allow more room for dishes, pots, pans, etc. I know I'm late to the party but only recently came on RUclips looking to find out why my Bosch SilencePlus 44 dba dishwasher sticks so bad.