VAUXHALL MERIVA B OIL CHANGE 1.4 PETROL OPEL MERIVA B OIL AND FILTER
HTML-код
- Опубликовано: 11 авг 2019
- VAUXHALL MERIVA B OIL CHANGE 1.4 PETROL
HELP THE CHANNEL
Patreon
/ baconbuttties
Paypal
www.paypal.com/paypalme/bacon...
always Warm the engine before an oil change
Opel Meriva B 1,398 cc 1.4 VVT
OIL AND FILTER CHANGE
1.4 VVT a14xer ENGINE Хобби
Thanks for the straightforward and clear video. A great help for us, knowing the principles is good but seeing the details is better :)
👍👍
Thanks for the video I didn't know where the oil filter was, I was about to let the garage do it you saved me a ot of money thanks 😀
👍👍
Thanks for the video - Just to say our meriva required a T40 torx so check first before buying a T45.
That's unusual as I thought the vauxhall drain plugs were all the same size.
Ive just used a T40 torx and it worked fine .
Another excellent video from BACONBUTTIES a great help to the amateur DIY`ers.
Thanks
Hi 7889
Hi 989i{OK 998 kllk89o99o9988 kko
999999999999ooOk9989999i9889ui
9
Excellent video. Thanks for the help. 👍
👍👍
Grazie per il video!
👍
Really very helpful video. Thank you so much
Thanks👍🏼
Thank you your video was very helpful 😊👍👍👍
Glad it was of some help 👍
My girlfriend told me she wanted a ring this valentines. So I got her an oil filter for her Meriva, which comes with an O ring.
👍😀
Just done the wife's meriva B the sump plug was far to tight so left it in place and used an oil pump to remove all the old oil got over 4 litres out of the car new filter installed and topped back up with just over 4 litres of new oil next time I will probably put the T45 bit on my breaker bar and try that.
👍
Thanks
👍
Brilliant video, thank you so much!
Any advice on the best point to place the jack stands? Doesn't seem to have a lot of solid points?
Thank you
I used the jacking point to jack up the car and put the axle stand under the chassis rail.
I don't know how many miles this car has done but I would recommend more frquent oil changes looking at the state of your old filter. i have a 25000 mile meriva and just after a 2000mile oil change the oil pump failed due to metal fatigue a known problem with this kind of timing chain engine. A swine of a job and £800 at the main dealer and thats if you can reuse the timing chain cover plate. Mine was ok a bit scratched due to the failure but salvagable. I have had other manufactures defects with this car including faulty relays made in Portugal coil pack corrosion. and plastic clutch master cylinder failure all down to bad quality parts. I hope yours is ok but be warned. Thanks for the video glad to see you changed the o ring. Regards😎😎😎
It hadn't done a massive amount of miles between oil changes, about 5000 at the most.
Thanks for the useful video! Do you know how tight the drain nut should be? I've got some oil around mine some months after last oil change.. maybe I did not apply enough force while i tightened. Thanks
I'm not sur of the torque values but it might be the rubber o ring that's causing it to weep oil.
Hi , thanks for video. Would it be possible to find out the make and brand of the oil filter please?
I used aftermarket oil filter, there is quite a few out there. I will have a look if I can find the invoice later
Noice! Any info on the oil pan screw torque settings?
I don't know the exact Torque setting? I know it would be low as I just nip them up. I don't have a manual so I had to go by feel as the information online is a bit vague.
your voice sounds just like someone from the National Geografic, you should talk over documentaries, nice voice :)
Well that is a very nice thing to say , lets hope they hear it and give me a job.
You forgot to mention to warm up the Oli for at least 5 min before drain.
I will put it in the description 👍
Приветствую мой друг. Коробка передач (gear box если не ошибся) f17 очень проблемная. Как у вас это решают?
Чтобы заменить масло в коробке передач, необходимо снять поддон коробки передач.
Я не про замену масла. Ресурс самой коробки 150-200тыс км. Выходит из строя вторичный вал и его подшипник. Есть мысль поменять саму коробку на менее проблемную.
did you forget the rubber ring on the oil plug ?
The o ring was on it
Hi have you got any videos on changing rocker cover
No, sorry I haven't.
No worries thanks
@@tariqmumtaz3475 👍🏼
can you tell me where you got the oil from as was going to vauxhall but see your one . cheers Ricky
Was a long time ago when I bought that but any 5 30 fully synthetic oil will do the job
@@baconbuttties what do you use now if you dont mind me asking
@@rickydowdind885 Mannol 5L Premium 5w30 Fully Synthetic Long Life Engine Oil Low Saps C3 dexos2
Tengo una duda no se si este coche tiene tapa de motor debajo de carter ?gracias
No hay cubierta debajo del cárter
@@baconbuttties gracias
@@carlos50 👍
Do these cars have oil pressure sensors. I noticed oil like substance dripping down the block just above the sump plug and was thinking it could be a sensor leak. Does anyone know 1.4T meriva b se?
All cars have oil pressure sensors as far as I know. Google Meriva 1.4 oil pressure sensor to see what they look like and compare to where you oil leak is 👍
@@baconbuttties ah thank you. I had a look around the engine and can't see one. My astra had similar engine and I couldn't locate that one either. An original Corsa I used to own had it sticking out of the front left of the engine block. I searched for the part by my reg and it looks the same just unsure where they are located on the newer ecotech engines.
@@TWGrops on the 1.4 turbo engines I think the oil pressure switch is relocated on the oil filter housing.
@@baconbuttties ah that would make sense as to why I couldn't find it on the astra too both are turbos
@@TWGrops 👍
I have a question where is the Benzin filter? Thanks
Benzin?
@@baconbuttties hhhhh fuel or benzin i live in Austria
I want to change it
But i cant find it
@@coolmann8803 it most likely a filter in the tank if its a petrol meriva
What year is this car? Any issues yet? Reliability
Year is 2010.. AIrbag module failed and rear door lock
@@baconbuttties We also had the rear door lock fault
@@russiandrivers9986 yes the door lock is a very common problem.
Oil must be dexo1 gen 2 or 3.. these r high temperature engines..
High temp engines?
@@baconbuttties in order to get better efficiency some engines work at higher temperatures such as this engine works at 110 or 120 degrees when normal car works at 90
@@us3804 nah it doesn't... It works at 90. Well mine did and so does my brother's
@@baconbuttties unfortunately despitte the thermometer needle shows 90 in fact the engine is 110 . That is actually one of the reasons why these cars have many gasket leaks. Plastic pieces and gaskets get old very quickly due to temperature..
@@us3804 have you a link to this information and what temperature the thermostat opens
Was it 4ltrs of oil you used
Yes 4 litres is the right amount.
@@baconbuttties
Spot on mate thank you. Wicked videos. Glad I found your videos as information on the meriva is pretty vague