Could someone possibly link the image from a source that isn't facebook? I don't have or want an account there, but this image looks very nice. Excellent mod and video as well!
How strong is your wireless charger? 1A 5V? And how long does it take to charge full with wireless? and how long with micro usb charging? can both chargers used at same time to charge faster?
Hi, The qi charger is 1 A and beeing 1A it takes a while to fully charge wirelessly ( 3-4 hours ) With micro USB, the charger has 2.5A, so it charges trough USB 2 times faster ( 2 hours) Is no point as it will be a maximum of 2.5 A, they will not add up so is advised to charge trough micro USB if you want a fast charge
The MagPi magazine reviewed your channel, that’s how I found you! Thanks for the great videos, however would you be ok to slow down a little? Especially with the more complex hacks. Thanks Paul
Hi Paul, I wasn't aware that they reviewed my channel, glad that you found me, and I will definitely slow it down a bit. Can you please share the link so I can see it 😍
Adam Builds I use the Readly App to read magazines, so I’ve screen grabbed it for you... www.dropbox.com/sh/zcwm8xnhzrta03v/AABzMe9npD7IqMhyIOxVW5-Za?dl=0
Is that correct i add the red plus cable on VIN and the Black Minus Cable on GND. I ask because in the last video you soldered it there for charging with micro usb. So are there 2 cables on VIN and 2 Cables on GND ? I hope you can help me. I also asked myself if Charging via Solar Cell is also possible on the back or top? When you are playing in the Garden so it can charge our the battery would last longer. I think you can make a Video if we can dremel the Case so we can Access the Mini HDMI port and use it for TV. Good Video. I subscribed when i saw the two Videos.
Hi, yes now with the qi charger are 2 gnd and 2 vin, like this you get to have both inputs of power For solar power, just get a charging cell and plug it in 😄 About the HDMI, I know that it will not work without a script to disable and enable video out I might have a look into that! Thanks for your sub 😁
Hello Adam finally changed the coil everything is charging. but board does not start when i hit on switch. only if i am charging short and switch it on. like a kickstarter on car battery. Maybe you can help me
Some cha ges has been made to the board and also depends of the booster, you can also add that small little button and wire it outside, after you press that the booster should jump-start
@@diettelo How I said, changes in the pcb has made, all you need to do is to add the button that the booster came with, route it to the exterior and when you press it, it should just start
Since the image is locked behind Facebook I guess whomever made it doesn't want anyone to use it. I'm never going to create a Facebook account since it demands my real name, which is just not going to happen.
Direct download link! mega.nz/?fbclid=IwAR329T3aW0aOqIdzI-f34NGxTTpGxPP20TaJs0tKRG0zoQlZ4DspltGviEM#F!Uq4kgQqJ!ihdo3AMQFRyfpsEMrxGW3w
Adam Builds Hi Adam, really appreciate your tutorial. The link to the image above just expired. Could you possibly refresh it?
Hi, I will drop you a link when I get to my pc
Thanks for the heads up on the image. Looks very nice!
These guys did a really great job there, is my go-to image now
Dude you're a genius. What a simple setup. Appreciate you sharing how you did it!
Glad that you liked it :D
Glad i found this channel. Very nice GPi mods and ideas! Thank you.
Glad you find it and you enjoy the videos, thank you!
Could someone possibly link the image from a source that isn't facebook? I don't have or want an account there, but this image looks very nice. Excellent mod and video as well!
mega.nz/?fbclid=IwAR329T3aW0aOqIdzI-f34NGxTTpGxPP20TaJs0tKRG0zoQlZ4DspltGviEM#F!Uq4kgQqJ!ihdo3AMQFRyfpsEMrxGW3w
How strong is your wireless charger?
1A 5V?
And how long does it take to charge full with wireless?
and how long with micro usb charging?
can both chargers used at same time to charge faster?
Hi, The qi charger is 1 A and beeing 1A it takes a while to fully charge wirelessly ( 3-4 hours )
With micro USB, the charger has 2.5A, so it charges trough USB 2 times faster ( 2 hours)
Is no point as it will be a maximum of 2.5 A, they will not add up so is advised to charge trough micro USB if you want a fast charge
Adam Builds thx good support
i can't find the retropie image you were talking about, do you have a link?
I added it to the description
@@Adamstech thank you!
Where is the link to that image?
In the description 😁
The MagPi magazine reviewed your channel, that’s how I found you! Thanks for the great videos, however would you be ok to slow down a little? Especially with the more complex hacks.
Thanks Paul
Hi Paul, I wasn't aware that they reviewed my channel, glad that you found me, and I will definitely slow it down a bit. Can you please share the link so I can see it 😍
I really want to know what they had to say!
Adam Builds I use the Readly App to read magazines, so I’ve screen grabbed it for you... www.dropbox.com/sh/zcwm8xnhzrta03v/AABzMe9npD7IqMhyIOxVW5-Za?dl=0
That just made my day so much nicer, thanks for letting me know in that day I was over the moon!
Hi Adam,
Question: i dont have the sticker anymore. Can i use Capton Tape?
oo yeah :D
Is that correct i add the red plus cable on VIN and the Black Minus Cable on GND. I ask because in the last video you soldered it there for charging with micro usb. So are there 2 cables on VIN and 2 Cables on GND ?
I hope you can help me.
I also asked myself if Charging via Solar Cell is also possible on the back or top?
When you are playing in the Garden so it can charge our the battery would last longer.
I think you can make a Video if we can dremel the Case so we can Access the Mini HDMI port and use it for TV.
Good Video.
I subscribed when i saw the two Videos.
Hi, yes now with the qi charger are 2 gnd and 2 vin, like this you get to have both inputs of power
For solar power, just get a charging cell and plug it in 😄
About the HDMI, I know that it will not work without a script to disable and enable video out
I might have a look into that!
Thanks for your sub 😁
Adam Builds Thx for your fast answer.
I cant read 5v on pcb +- charger is activated. funny thing cables i also read nothing. but charger activates.
hmm maybe coil has a problem?
Hmm, it might have a problem on the coil, it should charge it :D
This is awesome!
Is this possible with a real Gameboy?
It might be as well possible, I don't have an original one one hands 😄
Where did you get the replacement sticker?
Is the same one that I took down
@@Adamstech pardon me? I was talking about the sticker at 5:35
Sorry, I thought you mean the sticker on top of the Qi receiver, the cart one is printed by me, is a normal GMB zero one just cut down a bit :D
@@Adamstech ooh okok thanks! Do you mind Sharing the PNG of your sticker so i could print it too?
Hello Adam
finally changed the coil everything is charging. but board does not start when i hit on switch. only if i am charging short and switch it on. like a kickstarter on car battery.
Maybe you can help me
Some cha ges has been made to the board and also depends of the booster, you can also add that small little button and wire it outside, after you press that the booster should jump-start
Adam Builds i have the same charger like same board
Lantiarnc
Adam Builds My Problem with is:
That i have the same Charger Board like you. How do you start it? Or modded it.
Please help me it would be so good
@@diettelo How I said, changes in the pcb has made, all you need to do is to add the button that the booster came with, route it to the exterior and when you press it, it should just start
Adam Builds ok i try it thx
So cool. I am an electrician. I can wire up houses, commercial, and industrial, but I can't solder. I am useless lol.
Give it a go, is easier than it looks 😋
Can you make this work with a Gameboy color?
Never tried it, but I don't see why not
they should make something that connects to a tv that u can slot the gpi cartridge into
show us the 3A+ mod mate!
I will finish editing it by next week
Since the image is locked behind Facebook I guess whomever made it doesn't want anyone to use it.
I'm never going to create a Facebook account since it demands my real name, which is just not going to happen.
I will look for the direct link
mega.nz/?fbclid=IwAR329T3aW0aOqIdzI-f34NGxTTpGxPP20TaJs0tKRG0zoQlZ4DspltGviEM#F!Uq4kgQqJ!ihdo3AMQFRyfpsEMrxGW3w