For an even less expensive weight slide, use the soft tygone tubing and paper clip. You had the soft red tubing. Most hardware stores have lengths of the clear soft tubes. About 1/2” of tube with paper clip works great for a slide. I haven’t purchased a bobber stop in years. Most stores carry packages of little rubber bands in the hair care section. Do a full hitch around the line and pull it tight. Instant bobber stop. You can even trim the excess loop and it will stay in place for multiple fish. A couple hundred bobber stops for about $1.29.
As always, you never disappoint; just great content and great humor; what more could any fisher want? Exxxxcept, maybe a dancing bunny singing "let's go Brandon" And that right there is awwwwwesome!
Lol . I always try and throw in the memes that are trending, it's just about making people laugh. One person is already fussing about it being political , they must of not have been subscribed too long lol
Me and my cousin are on the opposite sides when it comes to politics and we have expressed our feelings, from time to time, over the years (60++++++)This cause some friction, but he's my kin, so we continued to interact. Here of late we have been interacting more and more, because we both love to fish, just like I did with his Daddy (who had the same beliefs as his son, or vice versa.) Now we don't even mention politics, as I did with his Daddy. We know where we stand, we know who we are, without a word. What this taught me was, I could miss an opportunity , whatever it may be, like talking about fishing, with a family member, co-worker , neighbor, friend, or random stranger over something as simple as my , or their politics. How dumb is that, jus sayin. Our world is too weird anymore. I read an article, today, where a guy shot his neighbor because he thought his politics was different than his. (Happened in Ohio) Then I read an article where a guy injured a bunch of people at a rally, yep same thing. How buggered up is that? So what am I trying to say here? Danged if I know, maybe just food for thought. Don't normally respond to videos or the likes. Thanks for letting me get that off my chest. Thank a Veteran today, they are entitled 👍. Enjoyed the video. Stuff I'll use, fur shur. Fish On.........
Take a Coffee stir straw cut it up . Also that little spout on the WD-40 when the can gets empty cut the Spout up for Sinker Stops . Good Idea`s Enjoyed it
I think you gotta leave some more slack in your chain between the zip tie and the attachment point on the bottom of the anchor. Maybe that would help it break that zip tie a little easier if you get it stuck
Man you have gots to be the funniest fisherman there is cause you as a fisherman hacker are unbelievable to funny. I wish that I could have gone fishing with you cause I like to hang out with funny people like you. 👍 You're the best man .
I been using the release clips and cannon ball weights for years for walleye fishing no secret to walleye fisherman you can go on the internet and find graphs that will tell you what ounce weight and how much line to run to find the depth you want to target fish keep up the good work I always like seeing ideas of other fisherman to get ideas of my own thanks again on good ideas
Those silicone beads can be pulled over the swivel a bit and completely cover the knot. This will give you complete protection from any wear or abrasion
2:10 I have been using these bobber stops from Bass Pro for about 15 years or so. I’m a bass fisherman & I would have to go to the pan fish section to find them. Then I was doing Rep work for my tournament sponsor at BPS & told them ti stock them with the bass weights. They did & they started selling out of them shortly after.
Saltwater slow trolling I use rubberbands with bank sinkers to keep my rigs down. Just break the band off when you get it to the rod and then reel the fish on in.
Thank you Keith another great video. Another thing you can do with the X tube wrap is cover a tiller handle with it I have a 1992 Evinrude 25 tiller that the handle cushion was coming off and it was hard to get a comfortable grip I took some of the 45 or 50mm wrap slid it over the tiller handle shrank it down and BAM a new tiller grip and I used red to make it more visible an easier to find at night or in a hurry it stands out .
HAhahaha that rabbit made my day, Even had mr 5yr old laughing. Thanx 4 your time and everything doing these fishing hacks.Much love from south aussie. God bless!
Hey fella I would like to thank you for helping me find interest in fishing again. In May after the ice is gone I think I will go try again, Thankyou 🙂👍
I just found your videos. These are a blast, lifting my mood from darkness to enjoyment. Difficult to stop watching. Thanks for what you are doing here. I survive on 800 bucks a month disability income and definatly need ways to save money and/or stretch a dollar. Wish I had a pedal kayak but thats a dream only as I never seem to get ahead. This July had emergency triple bypass heart surgery. Good surgeon apparently. 🤪😊😎😎 Keep the videos posting. I'm not the only one who needs these for sure.
Thanks Keith for the awesome videos!!!! I have challenge for you and I think you are the perfect guy for it. Could u build a portable DIY u.v charge box lined with some sort of reflective material for lures, spoons ,flasher ,flies and other u.v fishing gear? I have seen a few home made ones but I bet you could build something way nice help tons of us out. Thanks
Makes a lot of sense for that paperclip. I bottom fish for Rockfish and Halibut and because we use like 80 pound braid we needed a weak point in case we hung up. So I went with a 40 pound line for my weight since 9 times out of 10 it was the weight getting stuck between rocks. Save a lot of expensive rigs by just losing the weight
I am so glad I watched this video because I was trying to figure out how I was going to prevent my pet egg flow from pulling all the line in my bait ending up on the surface.
Love your hacks ! Been cutting inch or so pieces of cheap gas line hose for swivel/ sliding weight bumpers for 30 years for cat fishing , works great . …. You do a good job brother !…… Fish on !
You are the man I enjoy watching your ax and you come up with some great ideas yeah I thought about the paper clips also with the price of everything now you have to use office supplies outside the office and fisherman or in their office when they're on the water. God bless you and the family and keep those hacks a coming
A hack I like is spray flex seal. You can buy a cheap net and spray it with flex seal and rubber coat it cheap. Also spray large singers so they don’t knock paint of ya boat. Spray anchor chain you can spray yourself if you get carried away
What is even cheaper for weights is if you use a cotter pin, open it a bit put it over your line then put it through the hole in a large nut ( as in a nut and bolt) then open the cotter pin all the way so it can't slide off. if the nut get snagged the cotter pin will bend closed, the nut comes off. Another benefit to this is you aren't polluting the water with lead
Fishin N Stuff man I had a good time at the KC CatCon! Wish you could of made it. The family and I will be in Kentucky in February. Hope to see you at CatCon there
I love the paper clip idea! The rod handle cover are awesome too!!!! Thanks for the great ideas and keep up the awesome content! Best youtuber ever!!!!!!!!
I use safety pins (I grabbed a few one time from the wife's sewing stash) because I didn't want to stop on the way to the lake. They have done right by me ever since.
Love your videos. Hope to see ya 2022 kansas city catfish conference. I hope you can make it. It would be awesome and stuff if you did a seminar and stuff. Keep up the great content.
up here where we live we use a very small split shot to hold the sliding egg sinker or any sliding sinker away from the knot about 8 inches up works great and nothing comes close to the knot on the swivel
Tiny binder clips work for slides and then you have 2 hangers for the weights. Also air hose from your live well stone will be small enough for a knot protector. Youve really changed the way I look at my fishin' gear. Hack on man! 8646!
Love your video's! ❤ You keep me laughing, FJB!!🤣🤣🤣🤣🤣 AND I really love your hacks. I told all three of my nephews about your video's, RUclips channel. AWESOME!!! Have you heard of CTJ? 🤣🤣🤣🤣🤣⛵⚓🇺🇲🇺🇲🇺🇲
And another thing while I’m thinking about it Billy. if you buy WD 40 and they don’t have Maydān fold down straw on the Can you know you’re always losing your straw will take a wire
Keith...another awesomely awesome fishin hack video my friend. Am really excited to try out the silicone beads and the sniper skin on a couple of my "tired" but still fishable rod handles. Keep up the great work and congrats on the ever growing # of subscribers. If you build it, they will come.
All these diy videos keeps the dollar tree close to my house in business
OMG Keith that LGB and Bunny was over the top brother! 🤣
Lol
Funny that the eastwr bunny had to save that old fool. Hahaha
😂🤣😂🤣😂🤣😂🤣 bro you had me in tears with the bunny .. great video as always .appreciate the hacks! 🎣💯💪🏽
For an even less expensive weight slide, use the soft tygone tubing and paper clip. You had the soft red tubing. Most hardware stores have lengths of the clear soft tubes. About 1/2” of tube with paper clip works great for a slide. I haven’t purchased a bobber stop in years. Most stores carry packages of little rubber bands in the hair care section. Do a full hitch around the line and pull it tight. Instant bobber stop. You can even trim the excess loop and it will stay in place for multiple fish. A couple hundred bobber stops for about $1.29.
That's a great idea
As always, you never disappoint; just great content and great humor; what more could any fisher want? Exxxxcept, maybe a dancing bunny singing "let's go Brandon" And that right there is awwwwwesome!
Lol . I always try and throw in the memes that are trending, it's just about making people laugh. One person is already fussing about it being political , they must of not have been subscribed too long lol
😂 Without a doubt, my favorite part.
Lol
Me and my cousin are on the opposite sides when it comes to politics and we have expressed our feelings, from time to time, over the years (60++++++)This cause some friction, but he's my kin, so we continued to interact. Here of late we have been interacting more and more, because we both love to fish, just like I did with his Daddy (who had the same beliefs as his son, or vice versa.) Now we don't even mention politics, as I did with his Daddy. We know where we stand, we know who we are, without a word. What this taught me was, I could miss an opportunity , whatever it may be, like talking about fishing, with a family member, co-worker , neighbor, friend, or random stranger over something as simple as my , or their politics. How dumb is that, jus sayin.
Our world is too weird anymore. I read an article, today, where a guy shot his neighbor because he thought his politics was different than his. (Happened in Ohio) Then I read an article where a guy injured a bunch of people at a rally, yep same thing. How buggered up is that?
So what am I trying to say here? Danged if I know, maybe just food for thought.
Don't normally respond to videos or the likes. Thanks for letting me get that off my chest.
Thank a Veteran today, they are entitled 👍.
Enjoyed the video. Stuff I'll use, fur shur. Fish On.........
People are way to touchy Feely for sure . I just try and help people and make people laugh. It's like a medicine the Bible says
Take a Coffee stir straw cut it up . Also that little spout on the WD-40 when the can gets empty cut the Spout up for Sinker Stops . Good Idea`s Enjoyed it
I think you gotta leave some more slack in your chain between the zip tie and the attachment point on the bottom of the anchor. Maybe that would help it break that zip tie a little easier if you get it stuck
I can watch your videos all day long. I appreciate it. LGB
Man you have gots to be the funniest fisherman there is cause you as a fisherman hacker are unbelievable to funny. I wish that I could have gone fishing with you cause I like to hang out with funny people like you. 👍 You're the best man .
I been using the release clips and cannon ball weights for years for walleye fishing no secret to walleye fisherman you can go on the internet and find graphs that will tell you what ounce weight and how much line to run to find the depth you want to target fish keep up the good work I always like seeing ideas of other fisherman to get ideas of my own thanks again on good ideas
Got me with the bunny. Good hacks, good laughs.
You’re a brother from another mother. Love ya man! LGB!
Great Video. I use wine corks to hold my bait up off the bottom. Works well for me and free.
You are funny as well as smart on making things and showing us your ideas thanks for the great videos
Thank you Sir
Those silicone beads can be pulled over the swivel a bit and completely cover the knot. This will give you complete protection from any wear or abrasion
Fishin man! You trip me out! Love ya!! Let’s go Brandon!! Love it! Great videos and ideas!!
Thank you Brandon! And bunnies.
2:10 I have been using these bobber stops from Bass Pro for about 15 years or so. I’m a bass fisherman & I would have to go to the pan fish section to find them. Then I was doing Rep work for my tournament sponsor at BPS & told them ti stock them with the bass weights. They did & they started selling out of them shortly after.
Saltwater slow trolling I use rubberbands with bank sinkers to keep my rigs down. Just break the band off when you get it to the rod and then reel the fish on in.
The innertube over the chain, you could use wire ease (a jell electricians use to fish wires through conduit, slick as snail snot).
Thank you Keith another great video. Another thing you can do with the X tube wrap is cover a tiller handle with it I have a 1992 Evinrude 25 tiller that the handle cushion was coming off and it was hard to get a comfortable grip I took some of the 45 or 50mm wrap slid it over the tiller handle shrank it down and BAM a new tiller grip and I used red to make it more visible an easier to find at night or in a hurry it stands out .
That's really a good idea man
@@FishinNStuff if you want put it in a hack video I would be proud if it helped save a fellow fisherman or boater some money
Great video. The shrink tube for rod handles were just food for thought! Keep um coming, many great hacks.
This man is "AWESOME"! I really like his channel and hacks. .......( Any body that don't like his stuff is a SOB.) Lets go Brandon!!!!
I second this comment
👍👍👍😜🏴🦕🙂🤞✌
Amazing!! I can’t stop laughing.. didn’t expect that.. but love it…
Still upset Joe kicked Trump's ass in 2020!
TA DAY! You made me want to go waaaaaay back and start at your first video and watchem all again! Stay safe and healthy!
You to buddy
Oh my gosh you had me rolling. 🤣😅😂🤣😅
Run Bunny! RUN!!
And the hacks were great as always!
😁
HAhahaha that rabbit made my day, Even had mr 5yr old laughing. Thanx 4 your time and everything doing these fishing hacks.Much love from south aussie. God bless!
God bless Mate
I’ve been using grey screen tubing to make cheap buffers between the weight and hook/ swivel. You can make them any length you like.
Very cool!! Those heat shrink covers might be good tool handle grips too. Thanks!
I agree
You are hilarious! Laughing and learning is a great combination.
Thank you . I appreciate you watching
Learned something,...best of all I’m smiling. Continue your enthusiasm
Very nice thank you for showing it on you tube have a good night 🙂
9:15 I appreciate you. Thank you for sharing your skills knowledge and experience
Awesome. Did the bike tube 3 years ago. And still holding up
Hey fella I would like to thank you for helping me find interest in fishing again. In May after the ice is gone I think I will go try again, Thankyou 🙂👍
Taste great . The stress of life gets bad especially now days . It's good to have hobbies that take our mind off of things
Best part of video LGB
I just found your videos. These are a blast, lifting my mood from darkness to enjoyment. Difficult to stop watching. Thanks for what you are doing here. I survive on 800 bucks a month disability income and definatly need ways to save money and/or stretch a dollar. Wish I had a pedal kayak but thats a dream only as I never seem to get ahead. This July had emergency triple bypass heart surgery. Good surgeon apparently. 🤪😊😎😎
Keep the videos posting. I'm not the only one who needs these for sure.
I'm glad I make you laugh . My wife laughs at me all the time and I'm not even being funny 🤔
Thanks Keith for the awesome videos!!!! I have challenge for you and I think you are the perfect guy for it. Could u build a portable DIY u.v charge box lined with some sort of reflective material for lures, spoons ,flasher ,flies and other u.v fishing gear? I have seen a few home made ones but I bet you could build something way nice help tons of us out. Thanks
LGB!!! Awesome ideas. Keep up the AWESOME!
Enjoying your vids man keep it up. Applaud your effort
I am laughing out loud! Good grief! That is so stinking funny! Subscribed and forwarding to everyone I know who fishes or boats!
Thank you I appreciate that
Awesome, thank you fir sharing. Great video as always.
Your the best !!!!! Thank You James Fisher
Makes a lot of sense for that paperclip. I bottom fish for Rockfish and Halibut and because we use like 80 pound braid we needed a weak point in case we hung up. So I went with a 40 pound line for my weight since 9 times out of 10 it was the weight getting stuck between rocks. Save a lot of expensive rigs by just losing the weight
Everything needs a weak point , even reels have drag because of that . We're I fish 40lbs ain't weak though dang 😮
9:15 - And that's where I clicked the like button!
Greetings from New Zealand.
Thank you Sir
I am so glad I watched this video because I was trying to figure out how I was going to prevent my pet egg flow from pulling all the line in my bait ending up on the surface.
Enjoy the videos! Think you owe Pebbles some new paperclips though. Have to say the little heart shapes on the paperclips adds a nice touch.😃
Hahaha
Love it FJB. Just subscribed
OMG! The bunny was hilarious! And the let’s go Brandon, ANYWAY was a great touch as well. Made this my favorite of all!
Lol Thank you for watching
Awesomeness once again Brother ,I love the comedy ,Lets Go Brandon....
Thanks s lot the vaccum line is the best on yet. I have been thinking about silicon line for an RC car, but the closest hobby store is a ways away.
Good stuff. Thanks from France 🇫🇷
I needed that. LOL... You keep doing these. Love the hacks love your style.
I absolutely love watching your videos they are AWESOME !!! Keith
Thank you Sir
Love your hacks ! Been cutting inch or so pieces of cheap gas line hose for swivel/ sliding weight bumpers for 30 years for cat fishing , works great . …. You do a good job brother !…… Fish on !
Thank you Sir that means alot
Thank you bud , for all the good learning you shared.
Thank you Sir for watching
You are the man I enjoy watching your ax and you come up with some great ideas yeah I thought about the paper clips also with the price of everything now you have to use office supplies outside the office and fisherman or in their office when they're on the water. God bless you and the family and keep those hacks a coming
Thank you Sir. I appreciate you watching and yep we got to do things cheaper as the price of things get higher
A hack I like is spray flex seal. You can buy a cheap net and spray it with flex seal and rubber coat it cheap. Also spray large singers so they don’t knock paint of ya boat. Spray anchor chain you can spray yourself if you get carried away
Lol . Yeah I've sprayed myself before lol . Ive done all those other things too on past videos
What is even cheaper for weights is if you use a cotter pin, open it a bit put it over your line then put it through the hole in a large nut ( as in a nut and bolt) then open the cotter pin all the way so it can't slide off. if the nut get snagged the cotter pin will bend closed, the nut comes off. Another benefit to this is you aren't polluting the water with lead
Fishin N Stuff man I had a good time at the KC CatCon! Wish you could of made it. The family and I will be in Kentucky in February. Hope to see you at CatCon there
That would would have been great . I had to work this time
These are so cool. I appreciate your idea lots! Love and blessings from Ontario Canada
I live your videos but really loved the lets go brandon. Keep up the gfeat work and videos please.
Lmmfao this is one of the best videos ever. You have a great sense of humor.
Thank you Sir
I love the paper clip idea! The rod handle cover are awesome too!!!! Thanks for the great ideas and keep up the awesome content! Best youtuber ever!!!!!!!!
Thank you
I use safety pins (I grabbed a few one time from the wife's sewing stash) because I didn't want to stop on the way to the lake. They have done right by me ever since.
Brother you the bomb.
Not only is your channel funny as all get out,your very informative thanks for the Buck family of Caldwell texas
Hey thank you for watching. Tell the family I said hi . Texas is awesome
Outstanding Brother!!!! You have Some Absolutely Awesome Hacks Big Dawg!!!!!
Thank you Sir
Love your videos. Hope to see ya 2022 kansas city catfish conference. I hope you can make it. It would be awesome and stuff if you did a seminar and stuff. Keep up the great content.
A whole lot of Awesome there Keith!!!
I would like to wish you and Pebbles, as well as the rest of the family a very merry Christmas. Looking forward to what the new year will bring.
Thank you Sir , I hope you and your family have a wonderful Christmas and you receive the desire of your heart till there's no room for more
I want to go fishing with you guys! That would be AWESOME!
Lmao! Let's see it with the bunny. Had me rolling!
up here where we live we use a very small split shot to hold the sliding egg sinker or any sliding sinker away from the knot about 8 inches up works great and nothing comes close to the knot on the swivel
Keep em coming Keith, they just keep getting better!!!
Thank you Lyle
Man I've been watching you for about a week or so now I relate to your country slang I love your channel
Thank you Sir , I appreciate it . I just try and have fun with it
What can you dye foam bobbers with,and how to seal them? Love your videos.
Your Videos are always Great to watch & very informative..
Thank you Sir I appreciate that
We always used rubber bands, just cut in half then tie on and then cut end off. Works well and it's soft.
Tiny binder clips work for slides and then you have 2 hangers for the weights.
Also air hose from your live well stone will be small enough for a knot protector.
Youve really changed the way I look at my fishin' gear. Hack on man!
8646!
Thank you Sir I always appreciate the tips people leave me . I love like minded people that think outside the box
That anchor sequence was brilliant
Thank you . I thought it was funny lol
Everything you show is amazing an it always works thank you for all you share
Love your videos, great content and sense of humor
Thank you I appreciate it
You can rig up silicone beads in stack on wire like the bobber stops and it will make it easier to put silicone beads on line😊
Would love to see some kind of keel guard for a boat hack! Love this channel.
I've been thinking about that believe it or not
Now they are so excellent fishing Hacks 👍🎣👍🎣, ⭐⭐⭐⭐⭐.
G'day mate luv the anchor idea was waiting for the table to go arse up 😆
😆😆
Love jour hacks men nice diy
Thank for the LGB
Great stuff. Love this stuff. You have some great ideas.
Brother you are amazing I cant wait for your next videos. Keeper comin.
Love your hacks and channel! Hope you and yours have a great Thanksgivin’!
Happy Thanksgiving
Love your video's! ❤ You keep me laughing, FJB!!🤣🤣🤣🤣🤣 AND I really love your hacks. I told all three of my nephews about your video's, RUclips channel. AWESOME!!! Have you heard of CTJ? 🤣🤣🤣🤣🤣⛵⚓🇺🇲🇺🇲🇺🇲
I don't think so ?
And another thing while I’m thinking about it Billy. if you buy WD 40 and they don’t have Maydān fold down straw on the Can you know you’re always losing your straw will take a wire
made my day with LGB!!!! truly truly awsome! im buying some silicon beads too.
Lol thank you Sir
Keith...another awesomely awesome fishin hack video my friend. Am really excited to try out the silicone beads and the sniper skin on a couple of my "tired" but still fishable rod handles. Keep up the great work and congrats on the ever growing # of subscribers. If you build it, they will come.
I loved that movie 😁
@@FishinNStuff Ya...me too...its one of those movies that instantly makes you watch when you are channel surfing.
Happy New year buddy...hope 2022 brings you nothing but tight lines and sure hook sets!
My handles on my older stuff are cork that sniper stuff would protect it
Cool hacks thanks again for your experimentation on things
My favorite video yet thank you much
That anchor and chain combo is genius! I wish I had a boat big enough for an anchor like that 😢
Let’s see that bunny. That bunny is AWESOME!
Great idea for that bead!!
ty for sharing buddy always good to seeya working on this stuff
Those release clips would work great for jingle bells too. Clip a jingle bell to the end of your stationary rod, so you know when you get a bite.
They would