7 NEW PVC Fishing Hacks
HTML-код
- Опубликовано: 2 май 2021
- Ta Days DIY is on 7 New PVC fishing hacks , if it's your first time watching dont forget to turn on notifications, by ringing the bell so you don't miss anything .
For Fishin N Stuff Gear visit the Link below
www.etsy.com/shop/PebsPrettyf...
To save 20% off of any ,,,,,,,,,,,,Hybridlights,,,,,,,,,
Go to
hybridlight.com/discount/Fish...
enter code below
FishinNstuff
Thanks for watching dont forget to subscribe and click the bell for notifications
For 10% off of Katfish Clothing click on the link below
www.katfishclothing.com/?ref=Fishinput
Enter Code. FISHNSTUFF at checkout for 10% off all purchases Спорт
Don't judge a book by its cover. Found you by accident, at first I thought damn this dudes hillbilly as fk lol. But I watched, and learned some shit. You have some freakn ingenious ideas man! Keep up the good work!!
Haha thank you Sir, I just like to have fun . And try and make learning fun I guess . I really appreciate that
@@FishinNStuff have you ever tried or contemplated building a center console t-top out of pvc??
@@Johnny-sv5fc I have thought about it . But I used pvc years ago for tomatoe stacks and in the middle of the summer when it got up in the 90s the weight of the tomato plant combined with the heat of the sun made em lay right down on the ground flat . And I don't want people watching to spend that kinda money if it won't work you know . I have also thought about using metal wire conduit. It would be strong , light , cheap and it won't rust . But everyone can't weld . I'm still thinking on the subject though
Same
same here
Man I randomly came across this video and now I’m hooked, you are hilarious! I’m going to buy me some pvc tomorrow! Cmon!
The rod bucket is a space saver in my garage!!!
Love you're channel you've opened my eyes to just how much can be done with pvc that I wouldn't have ever imagined.
Thanks for saving me so much money. And I love that budgie .
I am a retired plumbing contractor I have lots of leftover pvc to mess with.
I'm gonna enjoy this channel
New drinking game.... every time FnS says "PVC", take a drink.... LOL, you'll be bombed by hack #4 - LOOOOOVE this channel man!
Here is one I did. 6in 7 1/2ft. (Depending on rod length) a end cap, a locking type cap on other end . I left mine white because of sun heat. Mounted to the roof rack of my teardrop camper and now I can leave my fishing poles in one piece and the reels on. No damage ,no tangle with other gear. Good show, I like easy hacks. Thanks for sharing.
I’m working at the shop getting ready to pour concrete raining cats and dogs outside watching diy Can’t get any better
Brilliant my friend! Gotta love some fishing hacks! Thanks for sharing!
The tool rack is really cool
I agree with that awesome tool rack being cool
Sir - I found your channel recently while looking for some fishing stuff videos. I recently moved to a lake and took up fishing ;-) . I've done my fair share of 5 gallon bucket and PVC hacks for tools in the garage and what not but your use for fishing is awesome! Gonna steal the toaster over to flatten some PVC this weekend, don't tell my wife. BTW and if it helps...if you ever need to bend a longer piece of PVC, if you heat up sand in the oven, put a cap on one end of the PVC and pour the hot sand into the pipe, let it heat up a bit and you can bend the PVC pipe to the the curve you want. Love your channel, love your style, keep up the good work. I tip my hat to you.
Loving the Hacks! Gives me an idea for a cutting board. Thanks!
I love the lead bends!!!!!!!
PVC is cheap and so easy to work with: I love it!
Another fine collection of useful tips and tools for makin' the life of a fisherman/woman easier. PVC is a pretty cool medium to be working in, and you are a master!! Look forward to seein' ya on the next build!!
Thank you Sir
I have a quick connect mount on my trolling motor and remove it from my boat when done fishing, you inspired me to make a pvc trolling motor stand. It works great and keeps my motor from getting knocked over in my garage
Friken amazing. I'm on the last two right now. Well tomorrow anyway. Thanks for sharing and keep em coming. 2 big 👍👍.
Love it. Lots of love from Ontario Canada!
Awesome! You're ingenious sir. Thanks for sharing!
love this vlog. Wish I could go fishing. But I still love viewing this helpful way to do things
Great hacks. I am going to pass them along to a friend who is looking to make something to hold his fishing rods. I designed pontoons for his kayak from 4 inch pvc that connected to 1 1/4 pvc that fit inside a lenth of 1 1/2 pvc that is mounted on his kayak. He is disabled with a broken back and cannot swim but loves to fish. The pontoons give him stability on the water.
Good old American ingenuity. Love it!
You are the man. Anytime I need hacks... I know where to look. Fish on!
The forming and tool rack are nifty. I might have to do something with that hack.. the bumpers are a cool idea as well. I don't have bumpers for my rowboat yet but that looks like a great way to attach them when I do get that far.
Truly enjoy watching this guy he comes up with some really good stuff
That PVC tool rack hack is genius... GENIUS! Thanks for that! Great channel, keep it up n stuff!
I want this guy to be all of my neighbors. Then all of my neighbors will be "AWESOME".
"Ow-some"
That right there would be Awesome 👍
Lol me too, I hate my neighbors
Dude. I feel the same way. As a dude myself, I think this is the first time I ever wondered if someone had a brother!
Absolutely.
Couldn't fish today, but at least I can learn a thing or two!
Thanks!!
The bumper hanger is AWESOME!!!!
Can’t wait to check out the new DIYs
Love it so far. The PVC rack is a brilliant idea…! 🤠
Brilliant DIY video! Congratulations Keith this video is great and the toaster oven part is an amazing idea!
Thank you Chris
Cool DIY project. I like the rod carrier & the bumper project.
That was awesome.....
Awesome video jam packed with really good ideas as always thanks for sharing till next time 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Found this as I am cleaning out the garage. Awesome stuff, thank you sir! Excited to watch more of your stuff.
Thank you very much
Okay.. So all of them are awesome - Thanks 🐠🤠
You have some great idea's. Everything you make turns out pritty dang awesome. Even if I wasn't in to what you're doing, I'd be happy to just listen to you talking. keep up the great work.
Thank you Sir
Enjoy watching your videos, and the DYI’s are awesome!
I love watching your videos and have a good laugh also. Thank you for sharing
Dude. You’re amazing. I just wanted to let you know you’re videos are simple & very engaging. Not over the top and you’re a great personality I just watched like 8 back to back and learned so much. Thank you!
Thank you I really appreciate that , that means alot
Brilliant ideas! I'm a new boat owner (1970 Sea Nymph) and came across all the ideas on your channel. I just might be able to save thousands of dollars keeping an eye on your channel. Thank you! Keep it up...
Congratulations on your new boat . And thank you for watching
I'd like to personally thank you for all the great ideas you have shared with us I really appreciate it
Thank you I really appreciate that
Now I see why you have this channel!
That's just awesome! I mean Awesome! Love them all.
Thank you Sir
I've got to say that hack for the rod carrier is EXACTLY what I've been looking for for so long.. my cheap ass just refused to pay those extravagant prices. I appreciate you and your channel that I just subscribed to! Can't wait to see more
Thank you , you can go back and watch my old videos
Thanks for the hacks! Best part of my day today!!
Right on you have the best ideas. And you show great details. So I made butt end rod holders out of 2.5 inch pvc, threaded rod and some tie wire. Could stab them in the ground and keep the pole off the ground and at a good angle that you can pretty much adjust
You are the Man!!!!! Great ideas. Thanks for the share
This is one of the best thing I have ever ordered on line.
The PVC master!
"ringing bells is fun", the thing with the bird ringing the bell was great, thanks for the laugh and some good ideas!!
Thank you for watching
Love the marker ....
In one word .... BRILLIANT .
Great ideas! I was laughing by the end of the video. Thanks!
Always good watching.thank you
Thank you Sir
Great stuff, thanks for sharing
Love that magnetized rod holder
Another wood stew hack is to coat the threads of the wood screw with bar soap. Smooth screwing after that. Less wear and tear on the drill and supposedly eliminates wood split.
Thanks for the ideas...
Awesome info sir thank you
Love it. Thanks.
Loved the rod holder. The one with the bungee's on it. Must make one. THANKS FOR THE INFORMATION BUDDY. 😁👍
Thank you for watching
Awesome!! Great PVC hacks!!!
Cool stuff. I am getting ready to put together the solar powered power station for camping trips and other stuff. 🤟
Brilliant!
As always you have great ideas keep them coming and thanks
All good hacks. 2&5 especially. Also gonna make me a rod holder for the basement. Thanks
Amazing ideas , thanks buddy and tight lines
Pvc is the.most forgiving material you can work with ,what Else Can Ya Say,,, that's just Purty Dang Awesomeness Right There Y'all 🦈🎣👀,,,, keep it Reelin Brother
Awesome! Thank you very much. Your Chauffeur J Bruce, Hollywood North.
My Good Man ,
Just by chance , I had already been looking for a rack of some kind to hold my knife and pliers and a couple of other things, after I saw some of them price’s , I come a looking for your ytube site and by crackly , I found the answer , you had already done a video on what I needed ! I done had some scrap pvc and got me one for my Jon boat , well make that 2, of them ! Thank you so much for having the right answer for a lot of things I need and didn’t have to spend a penny !
Great video I'll be putting my scrap pile to work..lol
Awesome diy brother never gave much thought of them ideas but will try it
Absolutely love your videos, just found you and subscribed, keep it up man! I'm doing a V-hull to bass boat conversion right now and have been lookin for ideas!
Awesome ideas.... and i already bought the PVC :)
For the bumper hack. If you replace the 90's in the hull hook part (on the outer/waterside) with T's and then use narrower PVC connector pieces from the bumper frame that have a series of holes in it you could make it height adjustable with cotter pins.
I said the very same thing in the premier chat.
Only rather than drilling holes i was thinking heavy o-rings for quick adjustment. Although holes with hitch pins would ensure no accidental slippage. I'd use hitch pins or hair pins over cotter pins. The cotter pins require bending which can be a pain in the butt and over time can break.
Also instead of having to buy different size pipe or fittings, use a die grinder or drill with a flapper drum and ream out the inside of the T's. I did that on a pvc project and it worked out well.
I’m building the boat bumper housing right now!!!! Cause they are Awesome!
This is excellent. Thanks!
Great hacks, enjoy your videos. Waiting for the next great video!
First time I’ve seen your channel. It’s outstanding.
#6!! Perfect for my jeep grand cherokee!!!
You are freakin' AWESOME!! How handy for me that I work in the plumbing department at Home Depot, and I'm working tomorrow, lol! I am sending this to my fishing friends, so thanks for the joy 💚💙💜 Abigail, fishing in a kayak in beautiful NH
Definitely using 2 of these ones.
Upgrading my rod rack and the car magnet is a fantastic idea
Tried the magnet idea but my better half told me, in no uncertain words, to get my rods off the refrigerator door.
@@cedarbrake1309 hahaha, did you tell it was a COOL idea 😀😀😀
You make awesome, useful videos. Thanks.
First time watching, 👍AWESOME! THANK'S
Love all the amazing ideas that you share on this channel. You may have already done this, but have you considered designing something to protect rod tips on a kayak (maybe out of pvc)? I hate getting near trees when the rods are in the rod holders, so I lay them down on the floor of the kayak, but they slide all over the place. Would be great if the tips slid into a protective sleeve of some sort. Anyway, thought if anybody could design something, it would be you. Keep up the awesome work.
That would be awesome
I hope pvc companies are sponsoring you , I can't wait to try some of these hacks ..
It’s got to be your best video yet!
This was AWESOME! TY
Great ideas
Great stuff as always! Love your channel!!!
More great hacks.... Love em..............
Soooo entertaining and bloody useful too! Love this channel. 🎣👍
Thank you Sir
Subscribed... absolute genius brother
This guy & his ideas
are awesome.I will be watching for more of his video's.There great !
Thank you Sir, you can watch any of them here
ruclips.net/user/FishinNStuff
Love this stuff
Glad I found you!
PVC is awesome. I built a rack for my motorcycle helmets. Awesome video
Very nice thank you for showing it on you tube have a good night 🙂