For my setup Elite Omnia - Performance Mods: 60# dw 77% let-off 26.5" dl 300gr arrow 310 fps More Importantly... Finest bow I EVER SHOT ! ... #2 isn't close. Paper Tuned in 2 Shots with S.E.T and an Allen Wrench. Hold & Balance are Spectacular. Best Grip in the Business. Best Finish in the Business 1/4" Draw Length Increments. 70-90% Adjustment w/ an Allen Wrench. (You can Perfectly Synch the timing of the cams) Both Cable and Limb Stops. This Bow is a **Ghost** post shot, Absolutely NO VIBRATION, NO NOTHING; it's OTHERWORLDLY ! You'll seriously question whether YOU FIRED IT OR NOT !!! Don't group single spots with this Bow (even at distance)...unless you like to pay and build new arrows. Shot my Best 3D Round EVER yesterday with a Crap Scope - I couldn't miss !! If you don't want a New Bow - **DO NOT SHOOT THIS BOW !!!** Hope it helps, John
With the shortish brace height and claimed IBO speed, most will dismiss it as just a speed bow, but it is actually very versatile and highly adjustable. Too bad you don't get the smooth mods for free. Bowtechs and my 2023 Diamond Alter include swappable performance/comfort modules for two bows in one. In lieu of that Elite shorty riser dampener, I am experimenting with Limbsaver stabilizer end dampeners screwed together on either side of my lower riser quiver hole. Strange that nobody makes a dampener specific for this application.
I test shot an Omnia today at my local shop. I really liked it, except that it made an audible "tick" noise when getting to full draw. It seemed to be the cable stop that was making the noise. It was just loud enough to be annoying. Did you notice this on the Omnia's you have shot?
I did notice this on the bows that I shot. Did your shop have the set screw tight on the letoff adjustment? The Omnia's that I have shot have been very quiet.
@@coyotecreekarchery I'm not sure about the tightness of the set screw. I will try to get back to the shop and look things over. Thanks for getting back to me so quickly.
Something I’ve done for 20+ years is add a small piece of soft side Velcro to any cams cable stop if there is a noise when the cable contacts it. Takes its right away.
For my setup Elite Omnia - Performance Mods:
60# dw
77% let-off
26.5" dl
300gr arrow
310 fps
More Importantly...
Finest bow I EVER SHOT ! ... #2 isn't close.
Paper Tuned in 2 Shots with S.E.T and an Allen Wrench.
Hold & Balance are Spectacular.
Best Grip in the Business.
Best Finish in the Business
1/4" Draw Length Increments.
70-90% Adjustment w/ an Allen Wrench. (You can Perfectly Synch the timing of the cams)
Both Cable and Limb Stops.
This Bow is a **Ghost** post shot, Absolutely NO VIBRATION, NO NOTHING; it's OTHERWORLDLY ! You'll seriously question whether YOU FIRED IT OR NOT !!!
Don't group single spots with this Bow (even at distance)...unless you like to pay and build new arrows.
Shot my Best 3D Round EVER yesterday with a Crap Scope - I couldn't miss !!
If you don't want a New Bow - **DO NOT SHOOT THIS BOW !!!**
Hope it helps,
John
That's a winner right there. Omnia should sell after seeing the other 2023 bows .
Nice review! I may have to go check out this bow. I have an Enkore that I really like but this sounds like a step up.
Thanks for the review i appreciate it. i got the same draw length and shoot 60lbs so very helpful for my specs 👊🏻🦌
With the shortish brace height and claimed IBO speed, most will dismiss it as just a speed bow, but it is actually very versatile and highly adjustable. Too bad you don't get the smooth mods for free. Bowtechs and my 2023 Diamond Alter include swappable performance/comfort modules for two bows in one. In lieu of that Elite shorty riser dampener, I am experimenting with Limbsaver stabilizer end dampeners screwed together on either side of my lower riser quiver hole. Strange that nobody makes a dampener specific for this application.
Excellent information great video.
I hope you get a chance to check out the new Hoyt turbo. With my 27" draw I need speed!
Hopefully elite address’s the “click” at the end
Nice bow
I test shot an Omnia today at my local shop. I really liked it, except that it made an audible "tick" noise when getting to full draw. It seemed to be the cable stop that was making the noise. It was just loud enough to be annoying. Did you notice this on the Omnia's you have shot?
I did notice this on the bows that I shot. Did your shop have the set screw tight on the letoff adjustment? The Omnia's that I have shot have been very quiet.
@@coyotecreekarchery I'm not sure about the tightness of the set screw. I will try to get back to the shop and look things over. Thanks for getting back to me so quickly.
Something I’ve done for 20+ years is add a small piece of soft side Velcro to any cams cable stop if there is a noise when the cable contacts it. Takes its right away.
@@nathanbrooks4324 great idea!
I never that tick on mine but I use the limbstops on my Omnia and also my new Era I just purchased.
Nice review! What was the name of the color of the first Omnia in your review?
First bow was Sienna Brown
Thank you!
Any thoughts on when they’ll come out with a carbon bow?
I don't know for sure, but it should be soon!
12-6-22 they have announced their new carbon bow will debut!
@@johnkertzman3223 😁
@@johnkertzman3223 I will post a review on it as soon as I can!
How much are the smooth mods , need a set for an Enkore
$75 MSRP for the versa mods