You used to have the Anvil clamp on your tripod, now it's a different one. Mind sharing which one it is? I'm in the middle of looking for one and I like how low this one looks. Thx.
Hopefully the .357 kit will be available for sale. Ernest, if you already have the power slug kit installed all you need to do is just change the pellet probe and barrel, is that correct?
I realize this video is two years old, however I just purchased a .35cal barrel kit and the hammer sleeve has no derlin insert like the one in your video but the new C1 has no derlin bumper either is this just a new version or is something missing? I’m installing this on my Impact M3 with power block. Thanks in advance
I was told by a local shop that I might as well buy mk3 since the larger caliber they make today will not work with the mkII unless I upgrade the internals since they were not strong enough to support this size. Does that sound right?
Thanks for this video, and all that you share with the community. I'm new to PCP, just bought my first rifle a month ago and I love it, a .30 Impact X w PP/600mm/580cc and a Helix on top. Understanding that you probably can't definitively give me an answer without seeing it, Can you tell me what the twist rate is on stock .30 600mm barrel that come on new (Feb2021) Impact X MKII and are they called "Superior STX (slow)" barrels or something else? Thank you for your time.
When I was reassemblying my mk3 I was left with one very small rubber ball the size of a bb. I did not see this in either disasseblying/reassemblying videos. Do you know where this belongs. Thanks for the outstanding vids
Good afternoon, buddy. I am Ricardo Ávila from Portugal and I follow your channel that is excellent! I want to ask you a question: What is the most powerful FX in joules in Cal.22, Impact or Marverick? Thank you very much, my friend.
Hi, I’d be lost without your channel. Thank you from Australia.may I ask what the best air compressor you would suggest to buy . I just ordered an FX Impact MK2 . I keep hearing I have to make sure there is no water residue in the bottle.
Ernest can you use the 357 barrel kit on impact With the power plenum and external Planum????? And where should I start with the Reg And what's the Best the Speed for the 81 grain pellets
Once I fix .35 with all producers and again I want to change barrel .22 ...is it I need change and everything like hammer spring all or its with Same things ?
Well again here's the .357 barrel kit but is it for sale yet on our planet... doesn't look like it to me but according to Ernest Rowe it sure looks like it is for sale now... I mean right now...lol. January 4th now @ 22:02... yea I wonder??? let me check the people that sell them...brb.
Hi! Ernest ! When you put power wheel on minimum and you measure 6.5 its for all caliber ? My slug power kit come soon (22 Cal) 6.5 is good too or no ? Thanks
when changing the .35 cal barrels from 800 to 600mm do you need to changeout to the upgrade hammer, springs plus weight and spacers that comes with 600 barrel or are they already factory installed since it is still a .35 caliber M3?
@@hourhungry I want to go from 35 to my 25 barrel I put it in it's shooting 1030' fps Try to adjust the bumpstop down And it's not doing anything staying consistent at that speed Can you give me any advice
You expect the average person to do this...... LMFAO...... Rather than EFF up your existing impact.... just buy a 35..... you have to be kidding me that the average user could do this and not mess up their gun....
You can use the opposite end of the vernier caliper to check your depth , much easier . ruclips.net/video/QlG6Qx5gmGM/видео.html Thank you for your tutorials sir , I enjoy watching your how to videos , I also like your electric screwdrivers , you make it look so easy ! 😁
Great video...... can you do a video on swapping out the factory liner and installing a superior liner on the .357 MKII Impact
They come with Superior liners. Are you asking for a heavy swap?
@@treeassassin thanks for the reply, I'm looking to shoot slugs from it
@@David2465 I've near given up shooting anything from mine. Waiting for hybrids before I sell it.
I did look at removing this liner also. Tight fit.. I decided not to break out the torch and rip it down before I decide if I'm unloading it.
@@David2465 I recently ordered one.. do they make slug liners for them ?
Thanks for Sharing your knowledge Sensei..... On a separate note, where can I get this Rifle Stand...?
Omg I want the .357 What a powerful PCP
great video as always buddy
Can we get a disassembly and reassembly of the Maverick please?
You used to have the Anvil clamp on your tripod, now it's a different one. Mind sharing which one it is? I'm in the middle of looking for one and I like how low this one looks. Thx.
Here it is... ruclips.net/video/7aksdF1M2pw/видео.html
Dose the 35cal barrel kit come with everything the fx X comes with
Is that Loctite strong enough to keep C1 from unscrewing?
Will their be a 35 cal kit for the maverick
You make it so easy, I wouldn’t dare try this mod.... I would have a box a fx parts for sale... Tom LI NY
It's not too hard, but no worries, your favorite FX Dealer should be able to take care of this for you! (or contact FX USA and we can help)
Thank you, great advice in which I’ll have to look into..... love your channel
What is the brand of the mini tripod used please thank you in advance.
Hopefully the .357 kit will be available for sale. Ernest, if you already have the power slug kit installed all you need to do is just change the pellet probe and barrel, is that correct?
NO. You still need the Heavier hammer and C1.
Yes, thank you...I saw the difference versus the slug kit...
Yep. Just the C1 & C5
Hey, ernest, how many inch pounds do you torque your scope rail and back bone screws to? I
Do you still need to change the hammer weight if u go from .357 to a .22 or any other?
Cool video. What is the gun tri pod clamp? And what caliber are you covering from to what caliber?
Doesn’t matter what caliber you’re coming from as the process is the same.
Specifically the Tripod and ball are discussed in the beginning of his video here and can also be found on EBAY and other places. @
Great video I was wondering what needs to be changed from a 25 caliber to a 30 caliber ?
Just need the .30 Cal barrel kit!
Dear sir did the impact mkii .357 came with the slug kit installed?
I realize this video is two years old, however I just purchased a .35cal barrel kit and the hammer sleeve has no derlin insert like the one in your video but the new C1 has no derlin bumper either is this just a new version or is something missing? I’m installing this on my Impact M3 with power block. Thanks in advance
What will be the 1st and 2nd reg pressure for .357 ?
Can you change impact m3 25cal to a 35cal
Will this work on mk2 with power plenum?
Yes
I was told by a local shop that I might as well buy mk3 since the larger caliber they make today will not work with the mkII unless I upgrade the internals since they were not strong enough to support this size. Does that sound right?
Can this barrel go on the Fx maverick???
Will the .357 internals be available separately from the barrel as a kit?
Thanks for this video, and all that you share with the community. I'm new to PCP, just bought my first rifle a month ago and I love it, a .30 Impact X w PP/600mm/580cc and a Helix on top. Understanding that you probably can't definitively give me an answer without seeing it, Can you tell me what the twist rate is on stock .30 600mm barrel that come on new (Feb2021) Impact X MKII and are they called "Superior STX (slow)" barrels or something else? Thank you for your time.
With other countries getting this for sale already . When can we expect this for sale in usa ?
The .35 caliber Impact are for sale with local dealers in the US
When I was reassemblying my mk3 I was left with one very small rubber ball the size of a bb. I did not see this in either disasseblying/reassemblying videos. Do you know where this belongs. Thanks for the outstanding vids
9:54
Hello
Whats the length of the hammerspring here?
Good afternoon, buddy. I am Ricardo Ávila from Portugal and I follow your channel that is excellent! I want to ask you a question: What is the most powerful FX in joules in Cal.22, Impact or Marverick? Thank you very much, my friend.
Hi, I’d be lost without your channel. Thank you from Australia.may I ask what the best air compressor you would suggest to buy . I just ordered an FX Impact MK2 . I keep hearing I have to make sure there is no water residue in the bottle.
Local dealers would be the best source for air compressors in Australia.
hi sir. my friend upgrade new plenum to 96 cc and valve power up 25%
Are you interested?
I bought the FX Impact MKII 0.35 for over a year but never make a single shot. Can I convert them to the 0.25 cal. ?
Ernest can you use the 357 barrel kit on impact With the power plenum and external Planum????? And where should I start with the Reg And what's the Best the Speed for the 81 grain pellets
Once I fix .35 with all producers and again I want to change barrel .22 ...is it I need change and everything like hammer spring all or its with Same things ?
It is possible to only change with a barrel kit, but our technicians suggest changing the hammer spring.
Nice! Like Lego.
Well again here's the .357 barrel kit but is it for sale yet on our planet... doesn't look like it to me but according to Ernest Rowe it sure looks like it is for sale now... I mean right now...lol. January 4th now @ 22:02... yea I wonder??? let me check the people that sell them...brb.
Hi! Ernest ! When you put power wheel on minimum and you measure 6.5 its for all caliber ? My slug power kit come soon (22 Cal) 6.5 is good too or no ? Thanks
All calibers it is supposed to measure 6.5mm
@@40motomike thank you very much !
Hi Ernest, what grade of Loctite black 4xx do you recommend?
Loctite 480
Will the .357 barrel fit the Maverick?
No, different pellet probe
@@FXAirguns will fx be making a kit for the Maverick? I will wait to buy slug kit if so.
when changing the .35 cal barrels from 800 to 600mm do you need to changeout to the upgrade hammer, springs plus weight and spacers that comes with 600 barrel or are they already factory installed since it is still a .35 caliber M3?
Hallo sir , i have the FX BOBCAT II , CAN A MAKE THE SAME?? Or can i make from 30 cal to 35 cal??
hello sir i have a question whether this fx impact barrel kit caliber 35 can replace the fx impact mk2 caliber 177 barrel kit ????
Yes you can use a barrel kit to change from any caliber.
@@FXAirguns no needs to change the hammer spring too?
@@hourhungry I want to go from 35 to my 25 barrel I put it in it's shooting 1030' fps Try to adjust the bumpstop down And it's not doing anything staying consistent at that speed Can you give me any advice
Hi
same process for m3?
Yes, except you do not swap the valve spring on the M3.
That stand is awesome, where can I purchase it from thank you Master Row?
He discusses it in the beginning here. Can search EBAY and other places @
Great uncle,how to contact if you want to boy a gun,how about you?🙏
aah! this is toooo technical for me
best left it to the pros and engineers.
Deveria você coloca uma loja aqui no brasil
May i know how it will shoot without the Modded Hammer & C1 hammer Seat if i just swap the barrel & probe becoz i have the kit with me?
👍
LIKE 👍👍👍👍
Can you just buy a gun and use it without having to do a bunch of mods?
Está é show é presente kkk like garantido
🇻🇳🤗🤗
You expect the average person to do this...... LMFAO...... Rather than EFF up your existing impact.... just buy a 35..... you have to be kidding me that the average user could do this and not mess up their gun....
Who wants to go through all that just to change a barrell? Smh
You can use the opposite end of the vernier caliper to check your depth , much easier . ruclips.net/video/QlG6Qx5gmGM/видео.html
Thank you for your tutorials sir , I enjoy watching your how to videos , I also like your electric screwdrivers , you make it look so easy ! 😁
Hi , where do i find the special tool to unscrew valve? Can i unscrew with other tool? Thanks in advance