Thank you. I am 13 and just started moddeling. i was dumb and didnt get the difference between the surface tools and the object tools. well now i know. take care everyone and thank you.
I'm 22 your comment just made me look actually dumb. I was like "Why it's not working??" and then, I saw your comment and almost slapped myself so thank you
Attempting to make an efficient egg holder that can hold different sized eggs, use less material and require less support. After I made the egg in the sketch I realised I couldn't add an even sized thickness around it and this is exactly what I needed ty!
Hi. I’ve a problem. I’m making a scale model of a large steam loco I made years ago. Printed version for the mantelpiece. It’s going well and just printed a wheel. This wheel has a secondary axis for a coupling rod which I’m including in the wheel print . The engine has a driving wheel with an extended axle . Simple just extend the extrusion. No; it doesn’t work because I put a small chamfer on it so I can’t extend it with the chamfer. How can you remove a chamfer from a model?
I am very new to Fusion……when I try to select the entire object (car hood in .obj format), I get the blue shading, but then try to use the thicken tool, and the object goes “gold”. I can’t seem to get the thicken function to work. Any help would be appreciated as I’m not totally familiar with all the basic functions of the program. Edit: I should add that the object alone has a very high polygon amount. Could that be part of the issue?
Hi Jstin when I draw a shape and draw another shape on it i can't grab the points on the second shape. would you let me know why? I drew a rectangle and then a circle on it. when I tried to grab the circle to make a tangent line I couldn't!!
for the last form that you did, once you thicken the final form, is there a way to break that shape down to be cut on a laser or plasma (dxf or dwg files) and shaped out of sheet metal? im trying to figure out how to do that for complex shapes? im a metal fabricator by trade, and hobbyist and have recently started learning the program. very helpful video, though!
Hi everyone! Let me know how you've been using the thicken tool in the comments below! :)
Thank you. I am 13 and just started moddeling. i was dumb and didnt get the difference between the surface tools and the object tools. well now i know. take care everyone and thank you.
I'm 22 your comment just made me look actually dumb. I was like "Why it's not working??" and then, I saw your comment and almost slapped myself so thank you
@@carolinalionelli7431 you're welcome. But I'm sure you aren't dumb. I think it's a mistake most people make. Keep up the great work😁.
Just one short video has opened up a whole new area of Fusion 360 for me. Thank you!
Great to hear!
Finding these very helpful thanks. Clear and easy to follow.
Attempting to make an efficient egg holder that can hold different sized eggs, use less material and require less support. After I made the egg in the sketch I realised I couldn't add an even sized thickness around it and this is exactly what I needed ty!
Superb Video - So well presented. Easy to follow. Found my new online Fusion Tutor!!!!!
Thanks! Super useful, well explained and to the point.
so helpful... thank you! concise and to the point.
Thanks you bro! This video help me a lot with a project for my college
Succinct, really easy-to-understand information. Thank you sharing your knowledge, I am looking forward to seeing your channel grow!
Man, I wish I knew this before I spent like 17 hours trying to figure crap out over the past year.
perfectly explained !
Great tutorials from Lawnmower Man.
Thank you
Thank you once again for an excellent tutorial
@The Fusion Essentials, how about the other way around? What if I wanted to remove 1 pixel from all edges?
You know, I love videos that don't start "Wassup guys?"
Same, this one was especially uncomfortable
Thanks for the videos very useful!!!
Great content again. Thank you
Thanks for watching! :)
OMG thank you I was wondering why my object wasn't being recognized properly by my 3d printer
This is what i need, big thanks, subbed
very good video as always
Useful and well explained. Thanks.
Thanks Dan!
Hi. I’ve a problem. I’m making a scale model of a large steam loco I made years ago. Printed version for the mantelpiece. It’s going well and just printed a wheel. This wheel has a secondary axis for a coupling rod which I’m including in the wheel print . The engine has a driving wheel with an extended axle . Simple just extend the extrusion. No; it doesn’t work because I put a small chamfer on it so I can’t extend it with the chamfer. How can you remove a chamfer from a model?
Very helpful!
Perfect video! Thanks
thank you very much
I am very new to Fusion……when I try to select the entire object (car hood in .obj format), I get the blue shading, but then try to use the thicken tool, and the object goes “gold”. I can’t seem to get the thicken function to work. Any help would be appreciated as I’m not totally familiar with all the basic functions of the program.
Edit: I should add that the object alone has a very high polygon amount. Could that be part of the issue?
Super merci
Great video many thanks
Hi Jstin
when I draw a shape and draw another shape on it i can't grab the points on the second shape. would you let me know why?
I drew a rectangle and then a circle on it. when I tried to grab the circle to make a tangent line I couldn't!!
for the last form that you did, once you thicken the final form, is there a way to break that shape down to be cut on a laser or plasma (dxf or dwg files) and shaped out of sheet metal? im trying to figure out how to do that for complex shapes? im a metal fabricator by trade, and hobbyist and have recently started learning the program. very helpful video, though!
thANK YOU SIR
Do you have an email or way I can get in touch please.