Vapor Blasting My 1965 Ford Mustang (Amazing Results)
HTML-код
- Опубликовано: 26 авг 2024
- ► Vapor Blasting Solutions :
Website - www.vbs-mobile...
Phone Number - 423-240-9580
Email - info@vbs-mobile.com
Instagram - / vbs1mobilechattanooga
►Hey Guys , In today's video we vapor blast the whole 1965 mustang ! The results came out amazing . Enjoy the video !
►Follow Mark - / mqqrk
-------------------------------------------------------------------
Subscribe! ► / vtuned.com
Instagram ► / vtuned
New Vtuned Merch! ► bit.ly/3asJjbS...
---------------------------------------------------------------------- Авто/Мото
That rear roof seem is down low like that so the same body shell could accommodate being a coupe or a convertible without having to produce a third dedicated shell (1st being coupe 2nd being the fastback). Having restored one of these cars myself - based on what I'm seeing after blasting you got a dream foundation to start with.
Ford Falcon is the same chassis as well , at least the floor , wheel base , and drivetrain .
ha, I just posted the same thing. That's what I figured as well.
Amen Brother..Could not say it better...
#Electriccar
Crazyvehicle#hitydesign
When I first screwed up my back, shoulder and knees at 21, I didn't care...
At 68, I care.
51 here. I care.
That man seemed to really know about the problem area on cars and he knew his business. That young man spraying the car seemed to be a natural at it. Nice to see a car come out so well!!! Well done!!!
#hity design
Hihiyekoko#hitydesign
I used to be in the business and anyone who can point a water hose can sandblast. I used to hire high school kids, suit them up in respirators and Tyvek suits, train them for an hour, and let them go.
@@Samalyzer45 Right?? same thing as the ice blasting, those dudes must make a fortune detailing cars
Replacing the firewall should come before you mount the subframe. Also primer on the frame.
Great job blasting that car man!
I love the fact that you’re also utilizing local businesses around you. 👍🏾👍🏾
3:28 For future reference, rotors and drums slide quite well on 2 x 6 lumber. I've seen many tow trucks drag a vehicle off the wheels up onto a flat bed just by sliding the 2 x 6 under the rotor or drum.
You could also have attached it to the hitch of your beater Ranger and used that to pull it out.
Or put tires on it
Huh mi
cut some plywood discs outa plywood and bolt t axles
@@alanmachen9884 in order to put tires on it you'd need wheels too and he said he sold them so......
@@rsprockets7846 haha, with the amount of weight that it has in this condition, that would probably work! Have to double up on each though....
You need to get some 'weld-through' primer on that shell as soon as possible-you'll be amazed how quickly it will rust otherwise.
Epoxy primer. Weld thru is a horrible first coat. You'll have a mess of adhesion issues.
@@braketurnaccelerate Yes, definitely Epoxy primer over bare metal 👍👍
@@SalvageMasterEssex etching primer
Hahiyekoki#hitydesign
Yeah I have seen a very thin layer rust appear after just hours on bare metal. You can just rub it of with bare hands after such a short time. But still highly unwanted
The body looks really decent! I am glad that you are feeling better... Note to self "next build keep wheels and tires until we are sure that we are done with them"
Looking good! Vapor blasting guy needs a bigger truck though. That thing was completely squatted!
Squatted isn't even the word... That's like 3rd world
Air suspension would work also
Yeah HD truck is recommended to pull these rigs.
I wonder if the front tank was full still and wasnt drained before they pulled out? I hope!! LOL
Wrong tow rig for the job. He did nice work though. The salesman told him it was half ton towable. 🤣
"I don't know how we're going to move it, I kinda sold the tires and wheels" lol
DUDE, that's the funniest thing I've heard all week! (don't get too excited, it's only tuesday! hahaha)
Glad you're feeling better. Build is looking good. Can't wait for the "Finished" product.
Hunter did such a awesome job I’m so proud !!! I love you!!!!
you got so lucky with that car dude shes looking good this will be a good one awesome job
To bad he didn't do the inside cuz it helps get the burnt smell out but it can be done by hand very glad you had this done it made your job 50x easier
I used to work in a shipyard and they vapor blast the hull now from the traditional sandblasting. This was due to environmental concerns and it is cleaner as you have seen. I can not wait you finish this hot rod and keep up the great videos.
Hahiyekoko#hitydesign
That's one of the best ways to also blast!
Down low seam on the roof is so they could have coupe and convertible on the same shell.
You really did get a great foundation to work with you have very minimal rust and the parts that are rusted are easily replaceable. You did good. Just make sure you get some primer on that car in the next few days so it doesn't start rusting again.
That was satisfying to watch. They need a RUclips channel!
Car looks great it’s awesome seeing the progress you have made can’t wait to see it finished
I have never seen an antique Mustang preserved so pristine not much rust its amazing.
I have the Dustless Blasting system that looks very similar to this process. I use recycled crushed glass with the inhibitor . It has its pros and cons. I think dipping a car is the best way to go if its available to you.
Depending on the cost. I watched a video of the dipping and apparently they're charging around $2500+ for that process which can take from 4 days up to 2 weeks depending on the condition of the vehicle.
How much would you charge for a job like this one?
That is so satisfying to watch.
It's looking great Ben, im glad your feeling better, great job as always! That mustang is gonna be awesome 👌 👏 👍
Hahiyekoko#hitydesign
Well done human forklifters, the condition off the Mustang is great and much better than I expect !! This will be a great car when it is finisht. Love this video as always !!
Great stuff. God speed in this built
Loving the constant uploads , Keep it up guys 🤙
The guys did a fantastic job vapor blasting this car. It would have very nice if you had a rotisserie to vapor blast the underneath. Looking forward to the next video. Great job 👌
I made a rotisserie out of two engine stands. I used one with a crank on it so I could rotate the car over. It worked great.
Okay Ben you need to research on putting front "torque boxes" on the car. You are cutting out the right side where it goes already. Look into it, with the Coyote motor highly suggested. Jus saying.
The Goonzuad should have Vapor blasted the 67 Camaro the drivers rear quarter panel is iffy at best. This is a good looking pony no surprises under the paint.
Thanks for the fantastic video you really are one of the best u-tube video maker and I glad the brothers are doing good as well great to see your hard work paying off all the best
That’s a transformation 👍🏻
Amazing process and well worth doing as you can see all the panels in their true form.
This mustang is a godsend amazing foundation to work with. Good luck with project!
so freaking cool. Absolutely loving this build slightly biased.
Can't wait to see the next episode
That came up like a new penny and original. BIG BONUS.
You got yourself one solid mustang! Looks all original, car is gonna be sweet.
Wow that is some crazy ass PSI on the vapor blaster. Like one baby notch below a water jet cutter sheeeesh just stripped that to bare metal like no joke
Vapour blasting is really intresting! Thanks for taking us along!
Been waiting on this
U have so have I man!🤯🤔🤔🤔
Another great video and project!
That Mustang has a nice body for a car pushing 60. Now the fun starts. Thanks Tennessee.
human forklift to the rescue..man, watch you backs guys..great job on the blasting and the body on that stang is in really good shape for it's age..
Jak patrzę na ludziach
I widzę ich chęć i zapał do danego modelu auta i jak tłumaczą innym powiem szczerze parę lat w sferze życia i zacząć w latach 90 i nic nie zmienia się ...
Wow, what a project, I'm really satisfied to watch this. Can't get patience this car to coming to assemble. Nice job :)
Bro I have not been this hyped about a build in a long time. The whip is looking absolute fire!
that ram the using to tow the machine is flexin!
Car blasted out great for its age it looks great suspension looks great also awesome job on the video thanks for taking us along on the journey 👍
Great job as always and I love your Resourcefulness.
Definitely smart to replace the firewall. Besides the rust that took the most heat damage other than maybe the roof. Maybe look into checking out if there’s a way to test the frame rail integrity? Especially putting in a 5.0 coyote you do NOT want those twisting any more than stock would
That's a pretty cool process 😎 clean 👌 the human forklift on the other hand 😬😳
Man you're golden, the Mustang looks fabulous !
*Project going ahead full steam* 🔥👏
Definitely a great canvas to start with after the blasting. This should be a piece of cake for you. I can't wait for the mockup of the new parts. Definitely going to be a beast.
yo bro, i just wanted to mention i cant wait untill the end of the mustang`s projects (both of em!) my dream cars since i was a little kid.
on the other hand i wanted to tell you DO NOT LIFT heavy stuff like that bro im a mechanic myself working for 12years in the shops and sitting at home now for 2 years straight due to a hernia wich i got from being foolish and thinking that i can do everything myself(lifting gearboxes ect) u know how it goes DONT DO that or u will find urself very soon health wise that would be very unfortunate because i would still wanna see the video`s that ull be putting out! thanks for your hard work much love from holland!
Amazeballs! Back in the day my friend Roger had a new 66 2+2 dark green fastback. I had my 63 Impala parked behind him in his parent's driveway. He backed up without looking and hit my car. This dented my front license plate but did major damage to the Mustang. The rear bumper was caved in and both rear fenders pooched out in an outward "V" shape. Flimsy construction. Fortunately the insurance paid for the repairs and it was looked great. We had lots of fun in that "Muskrat".
It’s all coming together now. Can’t wait for the next episode.
Love to c this Mustang getting sorted,and glad to hear u getting back on track bro!🤔👁👀👁💪💪💪👊👊👊👍
Awesome it's a lot better than what it could of been, being a old car , awesome for the next stage 😀👍🏻👍🏽
you wanna get primer on there because just the oils from your hands will cause it to rust and its hard to remove from the metal
Great video,looking good,was the best results for the car.make it easier in long run for repairing.kudos.keep it up👍👍👍😎😎😎
No matter what, you will get it done. Always a pleasure watching.
The body looks great, Will be a lot easier to work with clean metal then old paint!! Keep up the good work from one RUclipsr to another!!👍👍🔥🔥
Looking good. Stripped down as it is it still weighs a lot. Hope the blast crew helped give you a lift.
Wow that things cleaning up really well
14:52, wow that whole side is immaculate....too bad about the roof though....but the whole door and 1/4 and trunk? damn that's in great shape.......
it is getting together, love your videos
Cool!! Nice set up with the cross member/ suspension,that's gonna work out good!!👍gotta get the motor there an "giddy up" on mocking that horse up!!!🇺🇸💪👍✌🥪
Shes looking fresh, we cant wait to see the finished product!
That blasting really made a difference to that Mustang. Can't wait to see the front suspension on it . Keep up the great work and God Bless you and your family.
Ndakwemeyekabsa#hitydesign
That’s an amazing machine, what a great job to do, it’s such a satisfying job to do. It’s changed the Mustang completely!
it's a dirty, shitty job. anyone who likes doing it is a masochist
Hey, the cars in good shape now do your magic.
Perfekt video vtuned Rock with the new video setup. Perfekt 100% Nice to Watch 💪🏼
vehcor is building a 65 mustang on top of a 2016.he has a catalog that he bought all the new parts he needed.you should check out his channel.he does good work.as do you.keep it going!
Dang son! That worked so good and stuff!
Great job!
Really lookin forward to watching you give the Mustang the "V-Tuned" touch !
Hahiyekoko#hitydesign
Looking good after sandblasting! You guys do nice work too! Just found VTuned looking forward to many many more videos! Had I not watched some older Samcrac videos, I might not have found you!
Clean machine!
killer shape thats gonna be a nice ride when your finished
I'm so happy that y'all are making a lot progress on this build! keep it up!
Ndahakunda#hitydesign
That car is in great condition nice 1 Ben
good job. loving this build. hello from London u.k
Looking good boys!! Good to see Ur feeling better to bro!! Looking forward to watching the rest of the build and seeing what she looks like when she's finished... My dad loved those Mustangs unfortunately he was never in a position where he could afford to buy 1 but anytime he saw 1 going the road he'd check it out n day "oh yea that's nice that's the 1 ya want they go great.. 1day 1day" that day never came n now he's gone but I got him a red 66 convertible and a red 65 fastback (from memory) for his birthday and father's Day 1 year they may have only been models but he loved them. Anyways good luck with it all and a cool moon/sun roof would be cool to n save U ripping that roof off just sayin but.. ✌️🇦🇺
Hahiyekoko#hitydesign
Great comment. I built my dad a model of his 67 GTO he bought new. Took me 3 months and looked great. He was speechless. I built my mom a Eastern airlines constellation plane she was a stewardess on. Best presents I ever gave them
Looking good man
I have two 68 Mustangs now and have had a few 65s and 66s as well as a few 67s. Not sure how many I have had in total probably a dozen or more. Looking at your build with great interest.
The roof doesn't need replacing .
A panel beater would be able to smooth out any damage to such an accessible panel without using filler.
you are probably right but the metal probably got stressed with all that fire damage. its probably to weak to save. although i have seen metal workers use torches and water to bring back rigidity to panels like that.
@@tobiasripper4124 . The paint would be worse if it got hot enough to seriously weaken the metal . The process with torches and wet rags is called shrinking . Some guy sells a large stainless steel disk that you put on an angle grinder to heat the metal for shrinking instead of using torches as it is less concentrated and a bit safer.
@@anomamos9095 thats amazing. stainless disk on a grinder? works with friction? thats so weird and interesting. will check it out
Definitely get some primer on that bare metal ASAP before you screw around with that new front suspension, I know you're excited for it but bolting that up to a soon to be rusty vehicle is a bad idea.
"The MACH-V" has a great base to build upon.Good luck Ben.Glad you're feeling better.
There mint m8 car looks bisness let’s see this build take off nice base to start project
Wow that’s a great car so clean it will be a good foundation for your build!
I’m as excited to see this build as I was with your mclaren😎
Great content!
Chanukahyabo#hitydesign
2:30 Wow, no drive train yet and you're drifting it already.
thats such a cool process
When I worked at the stamping plant I remember making a lot of those firewalls around 600 an hour.
Love this , worth spending the money to have it taken back to the metal gives you a better idea what your working with 😃
Midnight purple would look sick on this mustang
You got one hell of a deal on this car
Mark next time try to interview the guys who are coming to work/help , let him explain what he is doing. Let him tell us about his company and the services they offer. Makes it more interesting and educational that way . Thanks!