Build The Ultimate Editing Desk for $200! | Tomorrow's Filmmakers
HTML-код
- Опубликовано: 5 окт 2024
- Join Our Full Tomorrow's Filmmakers Academy with over 1,000+ video lessons and over 100+ hours of content!
www.tomorrowsf...
Join "90 DAY FILMMAKER" and Learn How to Make a Full Time Living in only 90 Days
www.90dayfilmm...
(FREE 1 HOUR TRAINING) 10 Filmmaking SECRETS Nobody Is Telling You
www.tomorrowsf...
(FREE 1 HOUR TRAINING) How to go from ZERO to a FULLTIME FILMMAKER in just 90 DAYS
www.90dayfilmm...
PDF Download of Instructions:
drive.google.c...
Connect with us:
FACEBOOK:
Justus - / tomorrowsfilmakers
INSTAGRAM
Tomorrow's Filmmakers - / tomorrowsfilmmakers
Justus - / justusmccranie
WEBSITES:
www.tomorrowsf...
www.90dayfilmm...
EMAIL:
Justus - justus@tomorrowsfilmmakers.com
Thank you so much for this instructional video. I have made 3 of these desks for our office and we could not be happier. On a different note, I would like to make known to anyone building one of these that if you decide to build a 6 1/2 length table. You will need to adjust the size you are cutting. In the video it says to buy 4x6x8 but if you cut 1'11 inches on one side and 1 inch of the other, it comes out to 6 foot desk, not 6 1/2. Realize this when making first desk. Second thing is that realistically the cost is closer to $300 (still better than $1k-$4k). 8 planks of 2x6x8 = $118, the 4 steel pipes and flanges= $168, stains, glues, sander, sanding paper, screws and jig is roughly $110. This is just for thought so no one gets a surprise later if you are budgeting this build. Still an awesome video!!
you should put an underframe support for the whole square of the main table. in a longer period, the middle part will slowly bend no matter how stiff or hard the wood plates are, since most of your hands/body pressures are around it.
Is there anyway you could explain this a little bit in-depth for us beginners?
@@paulgreblick basically, throw a bar or something in the middle of the desk underneath where a majority of the weight will be.
@@2ndgenentertainment Thank you - long ways? Or across the boards front to back?
(Sorry...)
@@paulgreblick long ways. Follow the same way the supports for the edges of the desk do.
@@2ndgenentertainment Thank you.
👍🏻
Dude! Your desk looks sweet! And your instructions makes it sound like something I could actually do myself. 😅
I just started making this today.
I put in all the kreg screws.
I went to flip it over to start sanding and it felt a bit loose.
Maybe the glue wasn’t completely dry, but I’m going to put something on the bottom to add support, maybe a sheet of plywood.
But I like what I see so far.
Great video!
I definitly need a set up guide now on how to organize the desktop and how to connect the systems etc.
Great... so now I'm building a editing desk... hahaha! Awesome video! Thanks for the inspiration!
Money always been an issue, some show-off by buying costly one. Great work by saving money 👍
That's so awesome! I will eventually build this and then send a photo to you guys!! The desk looks so good!
The information given on building a desk for your editing station is very good I this is something that has to be considered in the beginning of building your studio because you're going to need this and you going to need the sooner later I'm glad you brought this up and this is something that I really needed to take and consideration before building my studio and I had to pick an account for the space so thank you so much this tape has been video has been very helpful and I will subscribe and thank you
Great tutorial. I've done kitchen tables something like this and I really love the idea of using the pipes as legs. I previously just used 4x4s and they are a bit clunky. Thinking of making one of these tables ASAP! Cheers!
I just watched this video the other night and downloaded the instructions. Looks really cool! Thanks!
Awesome video! I wish I saw this before I set my desk up last night... You have inspired me to build a custom desk in the future and for now, to customize what I currently have in place. Thank you.
Great video, excellent instructions. Not sure why you didn’t rip the 2x6’s on each side with a table saw so that there was no beveled edge when you glued all the boards together. This would’ve made the tabletop much nicer and less sanding because all the boards would have been closer together. Also I would recommend putting a clearcoat on all sides. This will help with some of the twisting and warping that you experience with wood.
While I think of it, top and bottom should be finished the same way. Humidity can make those planks bend, the finish prevents that.
I like more your table than the expensive one! I love the wood, metal and industrial rustik look. Nice!
I "made" my desk from a 6'x3' extremely solid walnut-looking freecycle melamine desk from the 1970s, a 6' walnut melamine modular shelf I've had in the garage forever and 2 support brackets from Ikea. Total cost: $8 for the brackets and some screws. Functional, extremely inexpensive, but it sure doesn't look like yours!
With lumber cost skyrocketing the midatlatic desk may be cheaper!😆
Didn't expect to learn this much! Thanks heaps this was great to watch!
inspiration in the key to creation I m going to customize my desk like
This is what I've been looking for!
Me too!
Love this!!! Thinking about making this a project!
the old Glue & Screw! Very Nice Build.
Less than 200 holy monkey. I'm going to build this and put it in my barn studio. Thanks for making this guide!
Hello tomorrow's film makers. I am subscribed to tomorrow's film school, and I am so grateful for the much you have taught me. I am passionate about film and are coming up with a studio space, is it advisable to make it a film and photography studio for quick money? or should I put all my time and energy into film and only film? will photography derail me from achieving my videography vision or will it boost me? All in all, I am very passionate about videography and more so, creating Christian content. Will really appreciate your advice.
nice, desk i should put the speakers on stand. a desk stand example a isoaucstics stand. or a floorstand. you get extreme mutch better sound
Superb..thanks for sharing it...was looking for such an information for a long time.
Just built mine, thank you for this. Only downside is that materials have gone up so much, it cost me almost 400 dollars. Still better than a few grand to make a desk. --Loyal Nine
one day, one day.. really a dream this desk 😇🙏
Nice video Justus!
Excellent info you're making me want to pay for the lifetime membership I'm tempted.
Wow.... super excited to try this out!!
This is a really well done video
You dont feel like the monitor is too far away from your eyes? 42 inches seems to far to me.
…inspirational! Better looking and creative desk, OBRIGADO
Awesome video Guys! thanks for sharing
where is the PDF?
He is back
Awesome Video!
This is a one awesome looking desk :-) I am planning something simmilar for my own setup but need to move first to have space :-) but I am inspired by your idea :)
Love this video very helpful
Hey. Would you like to share us where you got the light bar in the thumbnail? I have seen this in other youtubers‘ videos, but none of them shared a link to that article, and I can’t find it anywhere. I know it’s partially DIY stuff. It would be a great, if you could give us a direkt link to the lighting fixture. Wish you a great day!!
Awesome !!
Awesome video!!!
Cool stuff ♥
What diameter pipe did you use? Excellent video! Thank you!
His friend cursing him from the corner 😆
you're my favorite
How did you remove the printed writing on the legs??
Great video! Not directly related but was curious to know what monitor support you were using for the upper montor seen at 14:38?
what u prefer dual monitor or single wide monitor - for editing...?
@@screenpresentation dual usually. I like the stacked approach which this video shows.
Too cool!!
Where did you get your standing desk?
Hi! What monitor do you use to edit videos?
Cant fnd the PDF mentioned in the video. Anyone can help?
Does it ever bother you that it’s not a completely flat surface?
If it did, a 3mm sheet of melamine od MDF, properly finished, would fix it.
What's that mini monitor called and why do you have it? Nice video btw
That's a reference monitor, basically cost around $5-10,000 (even though it looks like it's from the 2000s), main purpose is for super accurate colors
@@andrefrueh Thank you!
I work at a sawmill I could basically make this desk for free haha
Great
Will the table eventually warp if you only stain one side?
Likely.
@Message on telegram @tomorrowssfilmmaker Oh yeah how much is shipping?
you are alive??
......I think so?
I want to quit everything and become a carpenter
How about you make me one just like that and I'll pay you double the price and shipping
Anyone want one of these desks I’ll make it for $1,000
eey
The desk I like is from a Lumix Shooter. Figures!
😂