You know what I love about your teaching method Angie? I love that you show us the good, bad, and the ugly. You don't say it's that simple. Yes, it is that simple...eventually. Showing the pitfalls, and your mistakes is such an encouragement for the novices.Thank you for being such a wonderful instructor!
Hey Angie First of all thanks for all of the amazing tutorials you do! I love how you keep it real and real simple!! I am wondering with the kitchen towels you show what the cotton to poly ratio is. Or if you pretreated the towels before sublimating. Again thanks for the helpful videos
Just love the microfibre dish cloths. Thankfully found them in South Africa, I have made so many of them already, make beautiful gifts. The make we have is Goldenmarc, work perfectly for sublimation
Beautiful towels!! I love this design!! Thank you very much for the wonderful Mother's Day gift idea!! I'm going to make a few of these as gifts!! 🏵🌺🌼🌹🌻🌸🌷💐
Just got some of these towels to sublimate. What size was the larger mason jar design? And, how do you know where to place the design so that it's centered when folded? Thanks.
I would make the size to fit the towel you ordered. So measure then folded in half then take 1/4 to 1/3 off of that. You want it in the center horizontally then in the center when the towel is folded in half vertically.
Thanks for the side by side comparison. I was considering buying some sublimation ready 100% cotton waffle weave towels... have you tested those? Thanks!
@@AngieHolden I appreciate the response, however it is very hard to find this file!!! If you could please send the direct link that will take me right to the file it would be a huge help.
Hi Angie! I’m having issues with subbing on waffle towels and the ink not getting into the ‘holes’ making it look dotted. Any suggestions? Yours turn out beautifully!!
Hello Angie, do you think using the auto press would remove the waffle design? I purchased the towels but then watched your video, now a little concerned.
I have a question when I do sublimation an I take a design in design space like a cat design an I choose the color in design space like a pink when I press my design the color doesn't look like the color I choose an I don't know why it is like the color in design space an the color that is sublimate doesn't match do you have an idea what I do wrong thanks
If you are using an F170 sublimation printer, I would make sure you are choosing rigid or textile depending on your surface. And maybe try a program that is not design space to see if it still happens.
Hey angie! I v got a real problem in my cricut maker 3, is tht when i put the knife blade or the score blade the cricut doesn’t detect it nd asks me to put it again ! 🥲🥲 i really need your help
First thing is to make sure Cricut Design Space is asking for the right blade. The blade it asks for has to be the one you add to the machine. Then look for common mistakes. The scoring wheel and the rotary blade look alike. People often confuse the knife blade with the fine point blade. Make sure the blade you are trying to use is the actual blade it is calling for.
![Coheed and Cambria - Searching for Tomorrow [Official Video]](http://i.ytimg.com/vi/hDsYGLbmadg/mqdefault.jpg)
Free mason jar file is here: angie-holden.ck.page/c6177c28dd
You know what I love about your teaching method Angie? I love that you show us the good, bad, and the ugly. You don't say it's that simple. Yes, it is that simple...eventually. Showing the pitfalls, and your mistakes is such an encouragement for the novices.Thank you for being such a wonderful instructor!
Thank you! I love showing what doesn't work and how I mess things up! HA!
Truly excellent walk through. Outclasses anything else I have looked at - a class act, Angie. Thank you.
Thanks for watching!
Angie Thankyou for helping me in this Cricut journey..
Your information has been so very helpful and I love this design it turned out so pretty..
Glad it was helpful!
Hi Angie. Thank you for this helpful video. Do you prewash the towels before sublimating? Thank you
No you do not have to.
Hey Angie First of all thanks for all of the amazing tutorials you do! I love how you keep it real and real simple!! I am wondering with the kitchen towels you show what the cotton to poly ratio is. Or if you pretreated the towels before sublimating. Again thanks for the helpful videos
They were all polyester and I didn't add anything.
Prefer the waffle weave myself as well. What a terrific project! Angie, love your channel!
They really are so good!
Just love the microfibre dish cloths. Thankfully found them in South Africa, I have made so many of them already, make beautiful gifts. The make we have is Goldenmarc, work perfectly for sublimation
You get them in large and medium waffle weave
Awesome! So glad you found them!
Beautiful towels!! I love this design!! Thank you very much for the wonderful Mother's Day gift idea!! I'm going to make a few of these as gifts!!
🏵🌺🌼🌹🌻🌸🌷💐
They really do make a great gift idea!
Just got some of these towels to sublimate. What size was the larger mason jar design? And, how do you know where to place the design so that it's centered when folded? Thanks.
I would make the size to fit the towel you ordered. So measure then folded in half then take 1/4 to 1/3 off of that. You want it in the center horizontally then in the center when the towel is folded in half vertically.
Thanks Angie! Love the towels
Thanks for watching!
Thank you! That was very helpful. I love that design!
Thanks! I seriously love the jar and flowers!
Thanks for the side by side comparison. I was considering buying some sublimation ready 100% cotton waffle weave towels... have you tested those? Thanks!
I have not. If they are cotton, then they have to have some sort of coating on them. That can change the feel of the towel and it can fade over time.
Do you use the 380 degrees for 45 seconds also for the microfiber towels? Thanks 😊
Yep!
LOVE the mason jar print. Having a hard time finding it though. Been through pretty much your whole site. Where might I be able to find it? TIA 🙂
Free mason jar file is here: angie-holden.ck.page/c6177c28dd
@@AngieHolden I appreciate the response, however it is very hard to find this file!!! If you could please send the direct link that will take me right to the file it would be a huge help.
or at least guide me in the right direction.
Hi Angie! I am just starting my sublimation journey. Is the vapor foam reusable as long as it is covered with protective paper?
Yes it is!
Why did you use the sponge piece if you are using the easy press Matt? Thanks for all your help
Trying to avoid press marks. See this: ruclips.net/video/SzyFsf85uvk/видео.html
Hi Angie! I’m having issues with subbing on waffle towels and the ink not getting into the ‘holes’ making it look dotted. Any suggestions? Yours turn out beautifully!!
Hmmm....maybe pressure?
Where do you get the waffle weave towels that you can subliminate on? Thank you!!
I have everything I used linked in the description below this video.
@@AngieHoldenthank you!!!
Hello Angie, do you think using the auto press would remove the waffle design? I purchased the towels but then watched your video, now a little concerned.
I think it will be fine with the right towels! I found not all of them looked the same after pressing.
They turn out beautiful Angie! Thaank you for Sharing and tnhe great tips and info! Hugs Liz.
Thanks for watching!
Can you tell me why you added the foam at the bottom? I have not seen this before. Thank you
To minimize press marks.
Thank you - loved it❤
Hi Angie I have clicked on your link which takes me to your page but can’t find the jar design thanks sue
Try this: angie-holden.ck.page/c6177c28dd
So frustrating. I have scoured her sight with no luck. Wish she could be a little more helpful.
Do you know if you can sublimate both sides of the towels?
Sure!
Is there a less expensive foam that can be ordered through Amazon that is resizable?
Not that I know of. The foam is around $30 for a huge roll that has lasted me for years. It is reusable.
Thank you great video!!
Thanks for watching!
Thanks for the g& comparison.
Thanks for watching!
Thank you
How do these hold up to washing?
Does the image crack or fade?
No it does not. This process becomes part of the fabric so there is no wear like other things that sit on top of the fabric.
Very nice.
Tack, älskar dina video!
Any new leads on dish towels?
We are working on updating all of these but I would try JPPlus or Heat Press Nation.
I see you’re wearing a Tennessee shirt! Love my state!
Yes! I live in Tennessee!
@@AngieHolden such a beautiful place to live. I’m in East Tennessee
We are around Nashville!
We are around Nashville!
@@AngieHolden I’m by Knoxville
For some reason the links for the foam and the Condi towels will not come up.
They have been discontinuing things. I know the foam kit was on heat press nation as well.
I have a question when I do sublimation an I take a design in design space like a cat design an I choose the color in design space like a pink when I press my design the color doesn't look like the color I choose an I don't know why it is like the color in design space an the color that is sublimate doesn't match do you have an idea what I do wrong thanks
That is common with converted printers especially. You can do manual color correction or try an ICC profile.
@@AngieHolden this is not a convert printer i have buy an epson sublimation printer so i don’t understand why the color are not the same
If you are using an F170 sublimation printer, I would make sure you are choosing rigid or textile depending on your surface. And maybe try a program that is not design space to see if it still happens.
Ok thank you for your help i am going to try that 😊
I don’t see the mason jar file?
Get it here: angie-holden.ck.page/c6177c28dd
Interesting. I thought we could only sublimate on 65%-100% polyester.
Yes these are polyester.
@@AngieHolden Thank you.
Hey angie! I v got a real problem in my cricut maker 3, is tht when i put the knife blade or the score blade the cricut doesn’t detect it nd asks me to put it again ! 🥲🥲 i really need your help
First thing is to make sure Cricut Design Space is asking for the right blade. The blade it asks for has to be the one you add to the machine. Then look for common mistakes. The scoring wheel and the rotary blade look alike. People often confuse the knife blade with the fine point blade. Make sure the blade you are trying to use is the actual blade it is calling for.