Top Five Accessories Your M&P Shield Plus Will Love You For !
HTML-код
- Опубликовано: 13 июл 2024
- In this installation, we look at five accessories that will take your Shield Plus to the next level. Let us know what you think of these additions, or if you have any of these accessories on YOUR Shield Plus. We read ALL the comments, and love interacting with you guys, so don't be afraid to say hello.
PRODUCTS WE USE
Palmetto State Armory: alnk.to/gKPnbtR
USCCA: bit.ly/49tIX1k
Streamlight TLR-6 (P365): amzn.to/3sUZ8Eh
Warriorland Holster w/TLR-6 (P365): amzn.to/479KDLG
Pole Craft Holster Without Light (P365): amzn.to/3SAfaOk
Pole Craft Holster w/TLR-6 (Shield Plus):amzn.to/46CFqLo
Streamlight TLR-6 (Shield Plus): amzn.to/40wg4NZ
Streamlight TLR-6 (Glock 43x): amzn.to/3PJO3xg
FDO Industries Holster (Glock 43x): amzn.to/3Q2LKaa
FDO Industries Holster (Glock 19): amzn.to/3PYR91R
Olight PL-Mini 2 Light: amzn.to/3QVnwxI
Olight I3T EOS Light: amzn.to/3RjF2x7
SOG Powerpint 18 Piece Multitool: amzn.to/3Gi75GL
Nexbelt EDC Carry Belt: amzn.to/47jR2Uq
Casio "G-Shock" Solar Watch: amzn.to/3N1lfjw
Claw Attachment For Holsters: amzn.to/3st8jLZ
Fire Starter Rod (AKA Ferro Rod): amzn.to/3N2zTGX
Pocket Mag Holder: amzn.to/49u3XF8
Pierce Grip Extension (Shield Plus): amzn.to/3ER44g4
Tac Wolf 3 Pack Grip Extension (Shield Plus): amzn.to/46w5b0b
Pierce Grip Grip Plug (Shield Plus): amzn.to/3LzhG32
Truglo Tritium Sights (Shield Plus): amzn.to/3LyRrd4
Shield Plus Optics Mounting Plate: amzn.to/3tcOad1
If you found this video helpful at all, we simply ask that you strike that like, swell that bell, subscribe and vibe with us, and please share with others who may also benefit from this content ! Until next time -- take care, and God bless !
Disclaimer: All pewstolas were unloaded for safe handling during the filming of this content. All pewstolas were handled by an experienced, licensed professional. Do NOT attempt this with a loaded pewstola, and ALWAYS follow basic safety guidelines and regulations.
NOTE: As an Amazon Affiliate, WWLD may earn from qualifying purchases made with any of these links, which could help support the channel. Any of these shared links are products that WE have actually purchased with our own moolah, that we use on a daily/regular basis, and think others may also have a similar interest in these products.
Smith and Wesson equalizer 15 round magazine works in the shield plus.
Good tip. I wasn't aware of that. Thanks for your feedback and thanks for watching !
I picked up a shield plus while S&W was doing a rebate for 3 free magazines. Ended up getting three 15 round mags for it. I wasn’t aware they worked either but was super pumped when I got them.
@@tongueofdisco4122 I tried to get in on that, but I bought mine one month early. Stupid ol' S&W should have given them to me anyway after all the hell they put me through with my Poorformance Sinner. 😏
@@tongueofdisco4122 how do I get in on this free magazine rebate?
@tongueofdisco4122 same here. I sent off for my 3 magazines for the rebate and was pleasantly surprised that I got 15 rounders. Sadly, one magazine accepts only 14 rounds no matter how much I try.
UPDATED LINK LIST
Pole Craft Holster: amzn.to/3PotKFw
Pierce Grip Extension: amzn.to/3ER44g4
Tac Wolf 3 Pack Grip Extension: amzn.to/46w5b0b
Pierce Grip Grip Plug: amzn.to/3LzhG32
Streamlight TLR-6: amzn.to/45XVPKS
Truglo Tritium Sights: amzn.to/3LyRrd4
Shield Plus Optics Mounting Plate: amzn.to/3tcOad1
Hey man me again 😃 well I gotta say that the Pearce 10rd grip add replacement adds to a faster draw. I’m finding that lil pinky extensions. Really work super well pulling out of the holster. I’ve been practicing/ training g with it and folks … it’s a big improvement in many ways. I’ve put back the 13rd clip and now carrying the 10rd with this Pearce replacement. It’s awesome ! Well worth the $20 bucks for sure.
I'm so glad it's been useful to you, mate ! 😁
Great video!! Thanks so much for the information 😊
So glad you enjoyed it, mate ! If you'd like to support our channel, be sure to like, subscribe and watch some of our other videos. Thanks so much for watching ! 😁
i just got my first shield plus, i bought a holosun 407k at the shop and had the guys Dremel it to fit, so far its better than my 43x for edc
The Shield is definitely superior to the 43x. You made a great purchase, friend. Thanks for your feedback, and thanks for watching ! 😁
Really liked how you closed that hole at the grip. Very esthetic 😊
Yes, but then it looks like you can't fully insert the 13rd magazine.
@@nmdesignco Yes , It cross my mind. It is a minus
@@nmdesignco @RanTausi Not so. All magazines seat in there just the same, with or without the grip plug.
What is the point of the butt plug?@@whatwouldlewdo
@@BrandensOutdoorChannel No point really. Just filling the empty hole. It bothered me. LOL
Excellent video!! ❤
Thanks, pal ! Got a LOT more coming. I appreciate you taking the time to leave feedback ! Thank you so much for watching ! 😊
Thanks for the info I have everything but the plug so I just ordered one again thanks.
Much obliged for watching, mate ! ❣️
OMG! So funny when you dropped it. I subbed right after that LOL 04:57
Haha. Thanks for subbing, and thanks so much for watching. 😁
Just picked up my Shield Plus today on Black Friday. S&W have a $50 rebate going on as well. Thanks for the video and the links to the accessories. I should have those in a couple days 👍
Score ! I too have a wee bit of a haul to show you guys. Let me know how you like those accessories. I hope you enjoy them. Let me know if you have questions. 😁
@@whatwouldlewdo I got the grip extender and the plug. Both work well and I used your heat gun trick (thanks!). I also got two M&P Shield Plus, Equalizer 9mm 15-Round Magazines and they fit well. Finally made it out to the range a couple days ago to shoot with my 2 boys. We were all impressed with the gun and accessories after going through 200 rounds. It will be my carry gun going forward once I decide on a holster. Thanks again for the great videos!
@@jjparks667 Awesome, pal. Glad you liked everything and that the Shield Plus has been a good shooter ! Thanks for your feedback, and thanks so much for watching ! 😊
XS big dot is super fast sight acquisition and works extremely well. Red dots are fine but need a lot of practice as you do not want to be fumbling around in a dangerous situation.
You're correct about the need to practice red dots. However, I'm not sure I would go changing the internals to my pewstolas, as that introduces more for room for error.
Thanks for your feedback, and thanks for watching.! 😊
Great review & Awsome the Scripture at the end. Praise God!!!
Glory to the most high ! Thanks for the kind words, and thanks so much for watching ! ☺️
Thanks so much for doing this video, great content and as such Very helpful ❤
Happy to help, pal ! Thanks for watching ! 😁
@@whatwouldlewdoReceived my Shield plus today. I am happy 😊
@@RanTausi Awesome, mate ! Which version did you go with ? Did you get the OR version or the base model ?
@@whatwouldlewdo OR
@@RanTausi Ooh, nice. How do you like it so far ?
Vortex Defender is the Red Dot I use on my M&P Shield Plus and it fit right on no problem. Works outatanding
I see those on sale sometimes. Not sure which one I would pick -- Holosun or Vortex. Both have great remarks about them.
Do you have a slight gap on yours between the optic and slide? Have the same set up and it’s got a little one.
Do you have a gap in between the optic and slide? I have the littlest gap with the same setup.
Great video my brother I couldn’t make my mind up about the shield plus since it felt too small for my hand and I’m in California so all I get is flush fit 10 round mags but this is a game changer thanks
Oh, that grip extension definitely makes it feel so much better ! Glad I could be of assistance ! Thanks for your feedback, and thank you for watching ! 😊
California finally added the M2.0, M2.0 Compact and Shield Plus to the roster on 11/16. Can’t wait till stores start getting the Shield+ in store
Ahoy there ! You will probably only be allowed to use 10rd magazines, correct ? I'll be glad when they finally axe that law because it is SO unconstitutional. I think that's one that's being challenged now, right (or is upcoming) ?
Thanks for your feedback, and thanks so much for watching ! 😬
@@whatwouldlewdo Yes you are correct we will be receiving 2 10rd magazines with the purchase. It really is a shame I believe the most recent attempt to lift the ban wasn’t successful(back in October) and I don’t know if there’s anything coming up soon. It totally is unconstitutional not to mention we’re paying the same if not more for the same gun with a smaller magazine.
Bummer. Well, at least you can get the grip extension for the 10rd mags. I really like the way it looks with that on there. Functional AND aesthetically pleasing. 😁
@d_2jz Actually, it WAS successful, but CA requested and was granted an emergency stay on appeal, so getting kicked up to a higher court.
@@chrislee8509 I thought so.
Phenomenal Advice & Tutorial In depth and informative, Keep up the Great Work cheers 🙌🏽
Thanks so much for the encouraging words, and thanks so much for watching ! 😁
Nice set up. I always order from PSA and I never return anything lol. I always keep it because eventually I’ll use it. 🤙🏽
Much obliged. Thanks for adding to the conversation, and thanks so much for watching ! 😁
Good video, thanks. They also make a 15-round magazine for the Shield plus. I love mine.
Thanks so much for the compliment ! I have tried the 15 rounder yet. I'm sure it would be good for training, but probably a lot hard to conceal than the the 12 Rd mag.
@@whatwouldlewdo I carry the 15 round as an extra mag
@@jllrue I only have the 13 rounder at the moment. I picked up a couple of pocket mag carriers that I'm trying out for review. Not sure if I prefer them over just shoving a mag in the pocket. We shall see.
Thanks for your feedback and thanks for watching ! 😁
An open bottom holster is ACTUALLY GOING TO KEEP LESS DUST AND HAIR out of your firearm.
If the bottom is closed, it will carry all the dust, lint, hair, and dirt that falls off and around you all the time and have it meshing with your firearm.
Open bottom allows all the stuff to fall out.
You may have a point there, friend. Thanks for your feedback, and thanks for watching. ☺️
Thanks again ! I just got the 10 rd grip add-on and was lil worried about it not clicking in place but finally got it, seems to be solidly in place. And I must say I really like the 10 round clip now as my pinky has a home now lol ! Thx !
Swell ! Glad we could be of assistance ! Thanks for watching ! 😁
It’s a mag or magazines brother.
@@nickolashogan4992 - it’s the Pearce clip for the 10 rnd
@@nickolashogan4992 don't be that guy
I would ditch the TLR-6 and get the TLR-7a. It protrudes but it’s a much better light. Although holsters are slightly more difficult to find
Thank you ,one would not need the grip plug with the other mag? If the grip plug was installed that mag would not go in properly?
The grip plug doesn't interfere with any of the mags. It's plugging that large, going hoke in the bottom. LOL
Thanks for watching ! 😊
Saw someone on YT with a pic adapter rail that clips into the trigger guard, it exists! 👍
For THIS Shield !? Funny enough, a few nights ago while I was messing with my P365 that has a rail on it, I actually wondered if they had one for the Shield Plus.
I have had that same holster for my mp too
What were your thoughts ?
Get a crimson trace red dot can pick one up for 80 to a $120. Works really well with the iron sights as well. Definitely worth the money for the average person!
I did actually. Just haven't gotten around to reviewing it yet. I actually found a cheap one on PSA for about $70 on sale to test the realm of the red dot world. It definitely has some drawbacks, but it served its purpose.
Thanks for your suggestion, and thanks so much for watching. 😊
I own an M&P 2.0 10mm with a 4.625 inch barrel no safety lever and put a Carver Custom Tungsten HEAVY Guide Rod replacing the lighter stainless steel guide rod. Had it quad ported by Mag-Na-Port. X/S steel optic height night sights with aluminum mounting plate mounted Holosun 508T titanium red dot. Apex aluminum flat safety lever trigger upgrade. Floyd’s aluminum base plate one round added with no spring change upgrade to hold 16 rounds over 15 rounds.
Me personally, I don't tinker with the internals. My mods are primarily on the outside. I just think it's safer that way, but to each his own, as they say. 😊
Thanks for adding to the conversation, and thanks for watching !
My gunsmith does the internals and Ken Kelly of Mag-Na-Port did the quad porting.
@@jeffreylocke8808 My main concern is the reliability and longevity of the aftermarket parts as opposed to the competency of the installer. A lot of these aftermarket companies making these components aren't held to the same level of scrutiny as the gun manufacturers.
As for the quad porting, wouldn't it have been cheaper to get the PC model with the factory ports ? I know that milling can be quite steep ! 😳
I've used Mag guts on my P365 and P365XL for over a year now quite successfully & they finally became available for the Shield Plus 10 round mags only. The extension looks the same as the ones in your video but adds 3 rounds. And it doesn't add any length to the back side of the mag. I have talked with other IDPA competitors and we all agree that the only good thing about night sights is that you can see where the gun is on your night stand. They serve no other purpose as you cannot see their luminosity when any surrounding light comes on. So for me who shoots in day, dusk, & at night, fiber optic sights and good 3 dot white sights work the best (as what all comes with the Shield Plus), with night sights being the next best, & the worst sights are thin & poorly painted white 3 dot sights (like on the suppressor height sights on the CZ P10C). I also took the light off of the Shield Plus as it conceals better & is easier to handle as there is more room in the trigger guard without it. It being physically smaller is also a plus when carrying.
I've heard of Magguts, but I'm not sure the added mass to the grip is worth the two extra rounds. The one you mentioned for the P365XL, for instance: It looks about as long as the 17rd mag, which is not ideal for carry. I think the 12rd OEM mag is the sweet spot. Plus I haven't seen an offering from Magguts where I thought it looked better than any other company, but as they say, "beauty is in the eye of the beholder."
Now it does cost more than a standard pinky extension, but mag guts sells a conversion kit for the 10 rounder that gives you the pinky extension but also adds 3 rounds without adding any lenth.
Yes, I'm aware of the Magguts extension. I prefer the looks of the Pearce Grip extension. However, I can't argue against getting the extra rounds being less beneficial. LOL Thanks for watching, mate !
this should be a series 🙏🙏
Top 5's, you mean ?
@@whatwouldlewdoyea top 5 attachments for ________
I will definitely keep that in mind, friend. Thanks for your feedback, and thanks for watching ! PS: Be sure to check out our 500 Subscriber Giveaway video if you haven't already. 😊
i also have the shield plus 9 how do you mount an optic mine does not have the adapter up top at all do you have to change the slide out?
Hi, Andrew. There are two options for the standard Shield Plus: one with an optic cut, and one without. It sounds like you purchased the one without. Unfortunately your only options would be to either buy the optics ready slide, or to get your current slide milled (cut) for an optic. Most places are pretty expensive, and cost almost as much as a new slide. However there is one company that does really good work that's also affordable. Check them out. I know they could get you squared away. Let us know how it goes if you decide to use them. ☺️ bit.ly/49aA10h
Agree at least about the Pearce grip extension. Makes a material difference and it's reasonably priced (on sale).
Thanks for your feedback, and thanks for watching ! 😊
A bit of friendly advice, you should get a holster that completely covers the trigger. I couldn’t really tell if that one does because you never put the gun in it it but it doesn’t look like it does. Especially for appendix carry.
Yes, it covers the trigger completely. None of my holsters leave the trigger exposed. I know better than that. LOL
Thanks for your feedback, and thanks for watching. 😊
No problem, good video. 👍
I got the DPP plate with the Holosun 507k and it cowitness’ perfectly with the sights on yours. I have the exact same model. I chose to not run the TLR6. I instead EDC the Arkfeld flat light for my PID, but I’m prior military and have a ton of practice running low light drills. I recommend all go through a class to learn that philosophy. I do recommend a red dot even on a pocket rocket. It just speeds things up crazy fast. In my view it’s more likely you may be rescuing someone else verses yourself and that red dot will come in handy.
I was SO close to getting a dot, but got the wrong size, and the appropriate model is the wrong price. 😆
I now have two different OR pewstolas, so one of them will definitely end up with a dot on it sooner or later. I'm just not sure when. Those babies are steep ! Haha
Thank you for your feedback, and thanks for watching ! 😁
@@whatwouldlewdo they are definitely expensive. The one I have on mine costs just as much as the firearm lol. At the end of the I decided for what I gain was worth the cost. I want every advantage I can get in a firefight. They definitely do that especially if you are already proficient with irons. I will admit it took some getting used to wearing it on my ankle. The shield is my backup. My IWB is my Walther PDP Compact Pro SD. I carry it 100% of the time. Shield about 10% of the time. Depends on where I am. Most of the time it rides in my truck.
@@DanielJohnson-ot8wj You carry the Shield on your ankle !? How wide are your pants !? LOL
@@whatwouldlewdo I’m a big dude 😆. 6’6” 350lbs. Not everybody can do what I do.
@@DanielJohnson-ot8wj The Jolly Gunning Giant, eh ? 😂
I would have liked if you put it back in the holster with the light.i guess it fits? Great video May the Lord continue to bless you as well!!!
I'll try to remember that next time. Not sure why I wouldn't have stuck it in the holster. LOL My apologies.
Thanks for your feedback, and thanks so much for watching. 😁
@@whatwouldlewdo thanks for the replies.Lew the firearm does fit in that holster with the streamlight?
@@Fishboy68 Yes, that's the light bearing holster option. It wouldn't work without that light.
@@whatwouldlewdo thank you
Like large bears. Figured I should've probably clarified. 🤣
Did I miss the beginning of this comment or something ? LOL
Holosun 507K X2. Dremel the rear 2 posts down flush, file the front two posts down a millimeter or so, seal it all back up with Birchwood Casey Perma Blue, and replace the optic screws with JagerWerks (the Holosun screws are less than optimal). It fits perfectly.
I run an optic because of my eyes. I wear progressive lenses, and if they shift, or fall off, I can't see the stock sights to acquire a sight picture. The circle dot reticle also plays well with my stigmatism.
Extended thumb safety. A lot of us hate the thumb safety and don't use it (noticed Lew's was off during the video). There's a guy on the pistol-forum that has started making an extended thumb safety. I've just reached out to get one to try.
The grip texture is abusive against my skin (I carry IWB at 3:30). Light sandpaper on the grip and a finishing file on the mag release took care of it.
Not sure I want to take a Dremel to my pewstola, but I am aware that it is an option.
I'm not sure why you would want an extended thumb safety if you don't like to use it. Did I miss something there ? LOL
The grip doesn't bother me because I wear a compression shirt (AKA workout shirt) underneath and it doesn't bother me at all. Conversely I have worn it without the shirt underneath on days when it wasn't hot (to avoid sweating on the gun) and I didn't notice it at all. Perhaps it's a tender skin issue for some folks. I'm not sure. 🤷🏻♂️
Thanks so much for adding to the conversation, and thanks for watching ! 😁
Check out the Swampfox Sentinel 2 dot sight. RMSC foot print, needs no adapter plate.
How much do they usually go for ?
Hey, what mag is that? I got a ten, 13, and fifteeen, but I haven’t seen curved grip mag like that
Well, I mentioned that in the video. LOL The link to the "mag" is also in the description box. It's by a company called "Pearce Grips." Hope that helps.
Just had them send me new springs and followers for both mags. Hoping it fixes the issue because i want to love mine.
If you still have problems afterward, let me know and I'll do a video on what I did to make mine load easier. 😊
@@whatwouldlewdo sounds good. I couldnt get the 13th round in and it wouldnt lock back on last round or with an empty round in. We will see what some new parts do.
@@BOBERT124 I had the same issue with not being able to load that last round in there, but no problem with it locking back. Just let me know if you still have the problem loading that last round.
If you guys like our content and wish to support the channel, please like the video, subscribe and click the bell, and maybe even share it with likeminded friends. Thank you for watching ! Take care and God bless.
I have the Holo Sun model HS 507 K X2 on my Shield plus. I like the 407 K green dot better that I have on my 365. Anyway I have old eyes , so the dot works better for me. I didn't use an adapter plate. I wanted to co witness my sights that come with the gun. I wanted the sight to sit low, so I ground off the little tips sticking up that were in the way of the Holosun. I have the ten round extended finger rest and the plug. I chose to carry a light at night so I can holster my gun in my regular no light holsters for the shield. I choose no light for concealed carry, because I think if I had to use at night ,it would be in a store or lighted parking lot possibly ? Anyway at home I have a light on my larger home defense gun, because more than likely things happen at night , when your asleep ?
I also have the 507K. It's a nice red dot, but the window is a bit tiny when compared to cheaper models.
I have lights on all my handguns, but I also carry a small flash light too. I find the lights not only serve as light (obviously), but it gives me more to grip onto and hold the front down when shooting.
Thanks for your feedback, and thanks so much for watching ! I hope you decide to stick around with us. Got plenty more content coming up. 😁
what is part number to the streamlight in your video?
Here is a link to the cheapest place I know to get this specific light: amzn.to/40wg4NZ
Thanks so much for watching ! If you haven't already, please consider subbing. We'd love to have you as part of our community. ☺️
What sights do you have? I want a green/red combo
My OR Shield Plus has the tritium night sights, but my PC model has the red and green (Christmas lights, as I call them). That might be the model you want to go with.
Love that scripture at the end.
All glory to the Lord ! 😊 Thanks for watching !
@Stopgordo I totally agree...👍 The scripture is the icing on the video clip!!☝🙏
I havent seen them on this gun but the hole in the bottom by the mag ive seen weights in some guns
People put weights in them ? I'm not sure I understood.
@@whatwouldlewdo yea i dont know i know on some guns ive seen like same cut weights put in them i have no idea what it would do to performance
@@nubekillerjake9400 Perhaps the idea is that the weight will control recoil, but it really only matters if the weight is at the front. Therefore I'm not sure what purpose it would serve.
Thanks for chiming in, and thanks so much for watching. 😊
@@whatwouldlewdo yea thats what im thinking i would want it all to the front so i really dont know why anyone would
I put a red dot on my boy , and its like cheating haha . I have the holosun 407c red dot . I highly recommend it . Once you use a red dot , you wont go back to irons haha .
I now have a Holosun 507K that I'm kicking around, but I still practice with my irons, even through the dot. I want to know how to use those fast and effectively as well if the dot shouldn't work when I need it to.
Until more recent years, getting a red dot was more strictly optional. After being 40-something plus and needing the services of the optometrist and ophthalmologist, I have become more interested in an optic. You may get there soon.
Oh, I got there alright. LOL I now have quite a few red dots on my pewstolas. Definitely still not proficient enough to immediately "find the dot" after drawing, but I'm getting there.
Thanks for your feedback, and thanks so much for watching ! 😊
Can I install a laser device on it? In performance center
That really depends on the model of the light/laser you're attempting to put on it, but they do have a few options available for this particular model. I believe one of them is from Crimson Trace, and I'm fairly confident that Streamlight has a light/laser combo.
What magazines are u running
For EDC I use the 10rd factory mags with the Pearce Grip pinky extension and a back up 13rd'er in my pocket.
Thanks so much for watching !
Couple things... I've nothing but great performance with Vedder Holsters. I prefer the metal belt Clio they use vs the manufacturers that use plastic. Plus the metal clip doesn't protrude as much, so it doesn't print as much as the plastic style.
The grip plug is purely asthetic. The hole does not extend in to the mechanics of the gun.
I like the pinky extension for the 10 rd mag. May have to get one. The light is cool too! I didn't know those existed as an option since there's no rail on the Shield. Do you notice the light hindering you trigger finger?
Yes, the grip plug is purely aesthetic, but I'm pretty big on that, so a huge, gaping hole staring at me just wasn't going to work. LOL
"At Vedder holsters, we pride ourselves on stalking people on the internet...and we hold true to that." I FINALLY stopped seeing their ads ! 😂
There's another grip extension that one of our viewers suggested by "Magguts" that add two more rounds, I think. I didn't care much for the looks of it, but it's an option you may want to look into.
No problems with my fingers and this light, and I suppose you could say that I have average size hands. Streamlight usually makes quality lights at a decent price. All the links should be in the video description.
Thanks so much for watching. ☺️
Does streamlight make a 500 lumen or brighter that will work on the mp plus? If so does it pretrude a lot? thank you
@@whatwouldlewdo^^
@@clutchshot247 No, sir. They only made the one version, which is the TLR-6 you see in this video. The Shield not having a rail really limited its options.
Thanks for watching. ☺️
I just put a Hogue grip on my shiels , makes a big difference.
How come ? The Shield Plus grip is one of my personal favorites. You no likey ?
I put a gray one on...I love those colors together.
Took about 10 minutes to stretch it on there.
I got it because the grip is just a little to slim for my long fingers...that little bit of thickness makes a world of difference to me.
Plus it smooths out the sandpaper grip against your skin when concealing.
Be safe all.
@@JustScottPaid I just wear a moisture wicking compression shirt underneath, and I don't feel a thing from any of my grip textures.
Excellent video !
Excellent comment ! Thanks so much for watching ! 😊
Both brand grip extensions leave a gap in between?
The usual gap you get with the mag bases in general, yes, but it's no more than factory base plates. The one toward the back where the frame drops down also seems to be the same as the one you'd see with the S&W base pad.
Let me know if you have any more questions. Thanks for your feedback, and thanks for watching. ☺️
@@whatwouldlewdo I appreciate your response. I just picked a sheild this passed weekend and looking into all these things you mentioned. Video was exactly what I needed. Thanks, again!
No problem at all ! Got a ton of links in the description if you need help finding anything.
No problem at all ! Got a ton of links in the description if you need help finding anything.
Did you try the Crimson Trace optic for $107
I found one at PSA for $70, but it's meh. I guess at that price though, it should be expected. LOL
I love listening to Mitch Hedberg teach about guns
"Man, you have a lot of cranium accessories." 😉
Lets hope you get more mags.
I have a ton of mags for these, 13 AND 10 rounders.
Do the gun still fits the holster with the light added
Yes, the specific holster that I have linked in the description/comments is the light bearing holster. This specific model wouldn't fit without the light. Which holster were you looking for -- light, no light ?
Well I’m going to order that holster and light but I have one more question do the smith and Wesson equalizer magazines fit the m &p 2.0
@@waliwhite1 Yes, sir, they're interchangeable ! Thanks for your questions, and thanks for watching ! Let us know if you have any other questions. Also be sure to subscribe to our channel to enter our 500 Subscribers Giveaway ! Then leave your comment on this video, and you're entered ! 😁 ruclips.net/video/WJbWSH-XLMQ/видео.htmlsi=TB_ukMW40Kj7k_WS
And thanks for the quick response
@@waliwhite1 A pleasure ! 😊
New TLR-6 HL is 300 lumens
How much is it though ?
Appreciate you mentioning Scripture at the end of your video podcast!! Please keep doing this!! GOD BLESS🙏😃🇺🇸🇺🇸🇺🇸TRUMP 2024👍💪👊
Your word, O Lord, is a lamp unto my feet and a light into my path. ☺️
How does your mag go in so easy mines extremely hard to push in
@@Smokinstrainstation88 That's odd. Haven't heard of that problem yet, but with my short time with S&W, nothing surprises me anymore.
@@whatwouldlewdo what problems have you had should I just get rid of the the slide lock is also extremely hard to push down as well almost impossible do with one hand at times
@@Smokinstrainstation88 Get rid of the slide lock ? It's pretty much essential to the gun functioning properly. 😛
As for the issues I've had, I had trigger issues, I had finish issues, I had trouble loading the final round into both the 10 and 13, and a nightmare of a time getting the pistol back from S&W in working condition. Check out our two full videos on the Shield Plus (Shield Plus Poorformance Sinner & Shield Plus Performance Center Won't Perform) for more info. Hope that helps.
Thanks so much for watching.
@@whatwouldlewdo lol I meant to say get rid of the gun 🤣 an okay was kind of banking in this to be a decent gun il never even get my money back out of it
I just watched the user error an tried that as well slide release still doesn’t release lol
Got a Desantis " Inside Heat " leather holster for $30 for my Shield plus...
Never heard of them. I haven't tried leather holsters, but it seems they wouldn't retain the weapon as well as kydex. Do you only use leather ?
I’m in CA and my question is should I get shield plus or p365?
Sorry to hear that, mate. First, what is the main feature you're looking to have ?-- Capacity, concealability, shootability, size, price ?
@@whatwouldlewdo Size and being able to conceal the 🔥 arm.
@@jd5655 If size and concealability is your primary objective, then it's definitely P365 for the win, friend.
@@whatwouldlewdo thank you for the quick response! I really appreciate it!
@@jd5655 Any time, mate. Thanks so much for watching ! 😊
S+W magazine capacity claims are always optimistic by 1.
That's hilarious ! 😂 Thanks for the chuckle and thanks for watching. 😊
Good info, but if a have to garage commando a simple rubber grip frame insert with a friggin heat gun to make it stick I'm looking at finding a better brand.
Nothing "commando" required, friend. It literally takes all of a minute. Nevertheless, thanks for watching. 😁
@@whatwouldlewdo Haha. I since got mag/grip extensions which negate the need, but thank you for responding
@@Seablack66 Are you referring to Magguts ? I've heard a lot of folks recommend them, but I didn't much like the way it looked on the Shield Plus.
Anytime, pal ! Thanks for watching. ☺️
@@whatwouldlewdo No, I was just referring to the Pearce extensions
Great video! So Iv been searching through the internet trying to find night sights that could co-witness (low 1/3) with my 507k holosun. I’m using a dpp adapter plate. (Shield plus performance center 9mm )Haven’t had any luck so I figured I’d try my luck here. Any recommendations? Links?
I ll see what I can find for you. Thanks for the consideration, and thanks for watching. 😊
@christianhernandez4704 Here is only option I could find. The correct blade height is 219-290 for 1/3, but if you enter the info for your setup, it should tell you the same. There are lots of options for colors, but the sights are kinda spensive. Anyway, I hope this helps. 😁 www.nightfision.com/product/night-fision-optics-ready-stealth-series-for-smith-wesson
@@whatwouldlewdothanks man I appreciate you taking the time to help!
@@cristianhernandez4704 Sure thing, mate. Happy to help !
I got some from NightFision. Nice with my 507.
/Smith & Wesson M&P Shield Plus, Equalizer 9mm 15 Round Magazine
This is a factory 15-round extended magazine for the Smith & Wesson M&P Shield Plus and Equalizer pistols. I copyed that lol but ya that guy on saying about the mags 15rd ones ya they will work and they have a bigger plastic piece for ur hand/pinky magshack 33.99 for em
@@tylerredneck I need to see look them up to see what they look like in the Shield Plus. Thanks for your feedback, and thanks so much for watching. ☺️
No thank u for showing them stuff in that video thank u and ur welcome and ya u should get one of em that mag and do a video on it and see what else u can get and do with the m&p SD Plus
I was just think u should get that 15rd mag with that plastic spacer that comes with it u should get a full size 17rd 9mm mag and put that spacer on the 17 and see how it looks and let me know if it works that would b sweet as heck coming from.a 13 to 17 l man that would b sweet as heck if not it's ok ud stil get ur 15rd on top of one in pipe so 16 altogether lol.
I just found bunch that add +4 or +2 u put on the mag but I just found something else too kinds sweet lookin I want one but i don't want one idk lol 😂 but a charging handle for that pistol.and for glocks too
The SCH9 Charging Handle for the Smith and Wesson Shield Model 1 and 2 9mm and SW40 (Including Shield Plus) aids with racking the slide. Instruction is simple and requires no permanent modifications to your firearm and takes minutes to install without the need for a gunsmith (Compatible with OEM Glock slides only).
Is this rust on the gun?
No, that was where I filled it in with color. It's actually red, but the camera made it look rather orange.
You have the same kind of holster I have but mine is for the OG Shield. It’s a good holster and decent Kydex support for the gun.
Shoot yeah, it's not bad at all for the price tag. Thanks for your feedback, and thanks for watching ! 😊
@@whatwouldlewdo Thanks for responding and you’re very welcome. What is your EDC firearm. I been carrying Original Shield since 2012 and a diamondback DB9 Gen 1 since 2016. This was a great review. You definitely deserve more followers.
@@Shadow3ffect I'm currently carrying the Shield Plus. I just got my PC version back from S&W, and I also have the Sig P365 and P365 Spectre Comp that I'm trying my hand at as well. May the best man win ! 😂
@@whatwouldlewdo that’s a good line up of guns. I know with the P365 they are saying the gun just goes off if ya seen the couple vids that show it happening. One was not conditioning the gun right. Cop basically pulled the trigger without paying attention. Other with the old lady getting shot in the foot is a fake video. So don’t be afraid to carry that bad boy with 1 in the chamber. Sig dropped the damn thing over 1000 times from 75 feet up with one in the chamber and it never went off. I don’t know much about the spectare sounds cool though. And the good ole plus. The Shield with a double stack mag and a better trigger. Perfect gun for carrying. Enough rounds and compact and still who cares what they say. Slim is nice but thicker is better for the hand and the follow up shot. I was gonna go Glock43x been contemplating for about a year. But I decided going to stay with the OG shield. This gun has just been to damn reliable and it’s light compact and if I cant hit a target less than 10 feet away with 7 to 9 rounds. I be to blind and need to get my eyes checked 😂
@@Shadow3ffect I believe you're thinking of the P320 that was reported to "go off" by itself. I haven't heard any reports of the P365 going off.
I have the 43X actually, and don't really care for it. It's just so behind the times, and the grip is atrocious. I'm definitely not a fan of Glocks no matter how much they "just run." LOL
Is that red crayon..??
No, that's paint. My PC model had a much better color in it that matched the writing on the side, but when I sent it back to S&W to fix the finish, they sent me a new slide, and the paint went bye bye. That one is all kinds of a hot mess now thanks to S&W. Here I just tried red because it's my favorite color. I may update it one of these days.
Only accessory you need is a Masada S with a bunch of 16 round Jericho 941 mags.
I don't know whether to take this seriously or not. 😆
Wrong channel Jeremy. IWI is around the other corner. This channel is fine.
@@TXLoneStar_ so because it's an Israeli gun all the sudden it gets segregated to its own channel GK?
@@jeremymetcalf2502 The a review is all about a Shield on someone's channel. Not a Colt, Sig, Glock, or even IWI. Not about segregation, it's about selection.
@@TXLoneStar_ The video is titled, "Top Five Accessories", this is number six.
The hole at the bottom isnt to save on material its to add a backstrap
I've never even seen back straps for these, so I think you're wrong on that one. Besides, backstraps are held on by pins.
@@whatwouldlewdo it's held in place with a pin but it hooks into the bottom using that hole and I've never seen one for the shield plus either but that doesn't mean Smith and Wesson wants to eliminate the possibility of you ever having one
@@whatwouldlewdo that hole is also used when installing a flaired mag well
@@CowboyBobby601 That's all after market thought. Otherwise it would come from the factory like that.
@@whatwouldlewdo okay but it makes a lot more sense than they just didn't feel like filling it in 🤣🤣🤣
I am trying your Amazon links , appears to me currently unavailable 😮
They all don't work, or you mean the grip extension is unavailable ? Please let me know ASAP so I can fix the issue.
I think you may be talking about the Tac Wolf 3 Pack. I checked the Pearce Grip link, and it's available, but the Tac Wolf is not. Is that the one you're wanting ? If so, I can try to find it elsewhere.
@@whatwouldlewdoFor me only the plate is available, but I don't need that. The flash light doesn't ship to my location, and the rest shows for me as unavailable. Maybe the issue is my location, I don't know.
@@RanTausi Oh, I see. Where are you located ?
@@whatwouldlewdo Israel.
What do you mean follow you around on the internet?
Exactly that -- they would track my activity. Their ads began popping up on the different sites I would visit, and each time an ad popped up on RUclips, it would be a Vedder Holsters ad. They aren't the only ones who use this type of unethical "remarketing" scam, but they surely did it more hardcore than any other company I've encountered...except for maybe VNSH Holster. I also see those all the time. However, they don't pop up on my FB account, email account, Google accounts, etc, like Vedder will, so I would argue Vedder is far worse about using those "remarketing" (stalking) techniques.
@@whatwouldlewdo I asked because I'm a tagging and tracking expert. The reason you're seeing those ads more is because they pay for that. This is not perniscious or stalking behavior they are just spending a lot on ads. It's not something you need to worry about at all. These companies don't get your name or personal info, just your demographic info and then algorithms serve you ads. There's an entire, robust industry, that you don't hear much about but trust me it's not something you should worry about! I do this for a living! In the absence of marketing you might get ads for tampons or something haha
@@dtps_champion6016 I've actually had some companies begin emailing me after visiting their sites, and I'm like..."how did you even get my email?" 😂
@@whatwouldlewdo pulling email is actually illegal
@@dtps_champion6016I thought so ! How do they even do that ?
30SC anyone?
In these ?
ahh sheet, did not know about tac wolf. I ordered like 4 g30s grip extensions. If i knew about tac wolf wouldve bought from them. Pearce grip is asking for wayyy too much for their piece of plastic grip. Pearce selling em each for 10 bucks a piece and tac wolf selling 3 for 14 bucks. Its not a rip off, its capitalism, its America. If u make the same product and sell for much less im all aboard.
Right ? LOL The only thing about the Tac Wolf brand is that they required a bit of modification to get that definite click when pressed into place. Otherwise yes, it's the exact same thing.
Drip the TLR6. 100 lumens is not sufficient enough.
That's your opinion, friend.
Scamazon ?? Really name calling? ... how old are we ?
Did we have our bowl of offended flakes this morning ? What generation are we from ?
@whatwouldlewdo no offended flakes here, sir .... but you claim to believe in god... then act like that 🙄🙄
@@donvee19591 Because I refer to an inanimate object as "Scamazon" I'm somehow misbehaving ? What if I hit my toe on a chair, and I say "ah, stupid chair !" Does that make me a bad person ? If you think so, you got some major problems, friend...
@@whatwouldlewdosorry I would NEVER be a friend to someone like you
@@donvee19591 Who extended it ?
I don't think I would want a red dot, as in my mind it seems kind of a "warning" to the "target". I figure if I broke into someone's house and there was a red dot on ME, I would get my butt out of the way. Just a thought...
Actually the way a red dot works is that the dot is only emitted onto the glass and not beyond it. You're thinking of a laser. I thought that might have been the way it worked too before I knew anything about it. Pretty interesting technology.
Don’t buy a crap holster like that. Spend the extra $20 on a Tulster.
Thanks, but it works fine for me. 😊 Much obliged for watching.
The pearce grip is garbage. The magguts plus 3 is better.
That's YOUR opinion, friend. Mine seems to be working just fine. Secondly, the issue with this Magbutts piece you're referring to, not only requires an aftermarket spring to be installed, but it also extends the grip, making it harder to conceal. I'll stick with the Pearce Grip, thanks. 😊
@@whatwouldlewdo I bet if you bought the magguts you would get rid of the pearce. The magguts is the same size but gives 3 more rounds. Plus it has a better follower spring for easier reloading
@@Honda1k It looks much longer in the photos.
That holster looks half arse
It's cheap and it works. Two characteristics I love for my gear to have. No regrets here. 😁
Thanks for watching.
@whatwouldlewdo I have a 1791 leather holster for another item and I'm thinking about the same when I pick this up. Pretty solid but it took some serious breaking in.
Bad Bad Information I am a SMITH &WESSON owner over 50 YEARS REVOLVERS TO SEMI AUTO. MY SHIELD PLUS HAS NO HOLES IN THE MAG WHAT ARE YOU TALKING ABOUT 👎🏾🤔👹👎🏾
What are YOU talking about !?
He’s saying the little hole not in the actual mag or clip whatever you wanna call it but in the grip there’s just a little hole… I mean.. he kinda like showed you
@whatwouldlewdo Does that hole go all the way to the slide? Or, is it a dead-end open cavity or area? Either way, I don't see a problem covering it for show or function. I don't see any "bad advice" by capping off the hole. It's not the magazine.
Lame....
Sorry that you think so. Better luck next time ! 😛
I would ditch the TLR-6 and get the TLR-7a. It protrudes but it’s a much better light. Although holsters are slightly more difficult to find
I like the TLR-6 line. I wish it was a bit brighter and that the housing was metal, but otherwise it's a great budget option.