Это видео недоступно.
Сожалеем об этом.
How to Relip 3 Piece Wheels - Nikita's Work Rezax II's
HTML-код
- Опубликовано: 14 авг 2024
- Online Store: www.OffBeatGar...
Instagram: offbeat_garage
Facebook: / obgarage
Snapchat: offbeatgarage
Relipping Nikita's 18x11 +0 Work Rezax II's to 18x9.5 +19 to fit his Wisefab angle kit by swapping from a 4.5" lip down to a 3" lip.
Sealant:
shop.wheelflip...
whatmonstersdo....
Use coupon code "LEDRIFT" to save 15% off the order!
OffBeat Intro and Outro Song by Yoshi Goliat
/ yoshigoliat
Can't wait for another vid of your build. This channel is super underrated. Keep up the good work Man
Thank you buddy
Just a tip when sealing anything, put down your sealant then spray it down with window cleaner ( this makes it not stick to your fingers) then use your bare fingers and smooth it out! 😃
Best video out here. Straight to the point and no hairdos. Awesome.
3 piece gang gang
even tho you are planning on taking apart the wheels in a year i'd still recommend using purple threadlocker, purple is the lowest strength threadlocker it helps the parts hold together but can be undone by hand tool pretty easily.
Good to know, thank you!
OffBeat Garage where is your own drift car?
In the garage, 30 feet from where I'm typing this lol
All my work hardware had locking nuts. Although I'd recommend undoing the hardware from the back and torquing from the back. Those bolts are expensive lol
How to change lip. Undo bolts fit new lip fit bolts?
i cant believe you missed the opportunity to make a brief shooting stars meme when disassembling the lip.
David Sciberras dead meme
glad to see the content is back! keep killing it man!
Thanks for the awesome fast pace video guys..
I want build 20x10 front and rear work vsxx wheel. Offset +30 with 5" lip to be flushed with the fender and tucked. The vehicle will be bagged too. Should I do 5" lips or 6" lip? I was told the offset would be +30. Is this true?
Great video just what i was looking for! Now i just need to know how the offset works when you change out barrels or lips ! Make avideo on that!
1.5 inches is like 38mm why would it be 18x9.5+ 19 and not +38?
because offset is measured from dead centre of the wheel not from the face
I got spec-1 20" rims ..I want to take the steel lip out. Do u guys do that job.n how much
That electric tire machine sounds so much better on the ears than the pneumatic ones I use all the time.
But u could take any three piece wheels and take theese apart, (no matter the method) and for example make it have more offset or less (deep dish/ less deep dish) right?
Would it make more sense to use the power drill on the inside of the wheel and wrench on the outside? I'd rather scratch the inside with a spinning tool than the outside of the wheel.
+Anthony Buscemi Can't reach it because the barrel has the drop center built into it. Take a closer look when I show putting the 10mm wrench on the back side and you'll see that fitting a socket there on a drill isn't possible. If it were, that would definitely be the preferred method.
when are new build videos are to be expected?
gang gang. Adel is back.
Why would anyone need a 12 point socket other than for the occasional 12 point nut btw (of which we have extremely few in europe anyway)?
They only thing I find them good for is to round the corners on six sided nuts and bolts (and they are super common, at least in my line of work).
In class "fuck it d000d gotta watch dat new vid"
hi, I'm using BBS RS slanted lips 18" 8.5.
how do I make it wider to 9.5? I can't find the available barrel to buy
Mohd Haikal blackforestindustries.com thank me later
they don't have 18" barrel tho. but thanks mate
threepiece.us
ayyyyyyyyyy thanks mate!!
Good video just did a set of 2 piece wheels on my channel. always wanted a set of 3 pieces
SUbbed!
one and a half million dollar tire machine
More like 1 and a half million dollar set of wheels.
Yoeri Kurvers 1.5 million dollar tire machine😱
Lol its probally not even 10k LMAO
If you don't follow his snapchat you don't get the joke 😂
Infandous Ktenology haha desperate? Why would i feel desperate if i follow his snapchat? I mean you're here watching his videos that's almost the same as watchen a snapchat. It's just a video of what's happening in his life. And Turbo douches? 😂
OMG so much work (no pun intended) if I had 3 piece rim, I would never take them apart... unless they are damaged or something
the 19 ft torque is for any two-piece wheels or just for this particular model?
I just bought a speedline corse wheels and I want to remove it to paint them properly but I wanna be sure to what spec have the bolt to be tightened
im going to start rebuilding my 18 kranze erms. do i need to torque them bolts to the same amount when i put them back on?
Bring the old intro back, shit had me dying every time
+Mike Medeiros Hahha I need to make a new one! Old file is corrupt
Next time dip your finger in soapy water before smoothing the sealant helps it to glide over the sealant so it doesn't stick as much to the glove. 😁
I remember when you started and never did a burnout lol look at you now rebuilding wheels..
What about a 2 piece welded wheel which is what i have , 15x9.5 ssr Watanabe
Hello..screw/Bolts..they are iron or titanium?
Should have run the 11s #hotboistatus
I'm planing on buying used vsxx wheels with a high off set. If I wanted a lower off set for a bigger lip, I can purchase a bigger barrel and achieve the look I want?
+Anthony Cruz If you want a lower offset then go with a smaller barrel and larger lip.
You didn't put any sealeant/glue at the edges of the tire? The man I'm going to for changing my tires always does that. Or is this not necessary? I have no idea about this.
What he's using is a tire lube to help with mounting the tire on the wheel. We also used a tire lube when mounting the tire. Although it is not necessary, just makes things easier.
OpaApoPl they usually put that sealant just to make sure that the tire doesn't leak.
Hey I wanted to order some cool Japanese drift mags but I dont know what or where to order any. Have any good suggestions?
Daaamn Nikita's rich homie! Rich gang gang!
For real. Who buys a $500 dollar torque wrench?
@@TheRuneCrew2 mechanics who use them all a lot buy expensive tools like that all the time. When I used to work on cars for a living I had tons of expensive tools. Plus the Snap-On truck showed up to every shop.i worked at every week so you can buy whatever you need, or they will replace or fix anything that is broken for their lifetime warranty, and all of our snap on dealers would give us 0% interest on anything we wanted. I would grab a few hundred to a couple thousand worth of stuff then pay him $100 to $250 a week. Even if things were tight or I didnt have the cash on me you could skip a couple payments with no penalty. Yea, Snap-On, Cornwell, Mac etc tools are expensive, but when you use them every day all day it's worth it. They are all so much better than anything you can buy in any store really... The 0% interest when they dont even pull your credit or anything cant be beat either...
Always, ALWAYS spin the nut not the bolt.
why is that?
HorrorHawk i would imagine so you dont strip the bolt or the hole
Where can I get new lips for my Work Rezax 2 18” wheels?
He really wise dabbed on y'all when he turned the wheel
Damn i love this channel.
How come there was no weld in between the barrel and lip?
Was that jingle bells you were trying to play with the hardware?
y would you put a smaller lip on go big or go home
Great job guys
Can you built one for a customer? I'm very much interested.
Could you relip my front work rezax to clear larger brakes?
so 2 piece is no good cuz you cant relip them to ur spec? its always gonna be inferior?
what are the wrenches at 4:53 top right corner used for the colorful ones. are they just adjustable?
They are used for AN fittings
I should really be in the garage rebuilding my wheels..
Great Job!
Does the positive offset create the poke or is that how the wisefab set up works?
+Tyler Novia Wisefab creates a ton of poke.
Why pull the barrel off if you're leaving it alone? Seems like extra work for no bennefit.
anytime the seal is broken it needs to be redone. So even though we only changed the lips, we still needed to take off the barrel and prep it for resealing.
Where can I buy new lips and barrels for my wheels and get them shipped to me?
Wheelflip.com is what we found to be the cheapest.
threepiece.us as well as vrwheels sells lips and barrles as well
More info on Nikita tyre machine?
I recommend a rubber wire brush to clean faster
Oi. almost crashed trying to watch your live stream.
notification squad waddup
Hahaha
David Sciberras don't watch adels live and drive
F*ck yeah another upload! :)
"don't get bloody, cut towards a buddy"
you should go help my man chris fix and his project car
thanks didn't even know my rims had a lip like that
1:39 why does the mounting surface look so messed up?
LukeyBabes mounting and unmounting over and over
holy angle 👀
That's a lotta angle for the dangle
where to purchase the lip new
min 14 -15 #OffBeatGarage where does car sounds?
is this the three guys one sr20 from yesterday?
+Apples yo Nope that was live streamed on Instagram. This is from another time where we just relipped his wheels
Saw you at Formula Drift on Friday, no camera gear though?
+hjibuloibgiol987 I don't record events like that usually
OffBeat Garage For sure, I can see why. Especially for qualifying rounds, it's pretty boring 😂😂
Notification squad!!
could of used the tire machine to cut the glue off
i do that same clap @13:35 hahahah
torque spec says 19 lbs is that one ugg or two? Lol just seen a meme about that
two ugga duggas.
Fucking hell holding onto the handle on the bead breaker can break your arm or rip your elbow out of its socket
Tag 915 no it can't, use to work in a tire store and never had a problem
Where do you get the parts?
dope ass video
Ty fam
How does Nikita have so much money?
His dad is Vladimir Putin.
+The Scorpion He has a job lol how else
I didn't know professional Hotboii was a real job
Are those Nikita's 1.5 million dollar rims?????????
3tlg ❤️
these are like my dream wheels ! i just wished they made them in 5x100 for my subie
Hi
how long does it take to do 4?
+Nay Cee If you know what you're doing it'll probably be under an hour a wheel to go disassembly, cleaning surfaces, installing new lip, torquing to spec and then resealing. If it's your first time probably a little longer.
dat clap tho
Be careful that's a 7 mill bench you're scratching up
Why did I just watch this? and why is canelo worried about wheels when he should be training?
Wtf! I missed 4 videos from you because you weren't showin up in my sub box. Fuck youtube
#nakaisantipsandtricks
rich gang 😂
FIRST!
Nikita Rushmanov y i can still see my comment huh nikita
Nikita Rushmanov 1.5 million dollar comment
the fitment lol
Why the hell would you take a short cut. The pressures on the wheels from drifting is crazy. Why be lazy and not install locktite.
Tip: never try unbolting 3 piece wheels without an impact gun, you get really bad cramps
+beeza copper Ohhh yes hahaha very true
🤔
Hello from the other side
I must have called a thousand times
Anyone else hear jingle bells when he was drilling
#notificationsquad
What is so wrong with buying tires that actually fit the wheels? Why do people even think stretched tires look good?
those wheels are pure sex in my eyes :D
Who the hell goes DOWN in lip size -_- .....................................................
People who have 65 degree of front lock of and bought 4 18x11 wheels
Ayyy HotBoiiii AF * *Camera shake* * hahah
Hahah snapchat fam
BRUHHHH haha good to see more videos coming out every week fam
#youtubemoney
that's such a tedious job