Fixing A Customer's Attempt To Refurbish Their Own Wheels
HTML-код
- Опубликовано: 26 дек 2024
- A customer brings us a set of wheels they attempted to refurbish themselves. We show the full process start to finish of how we correct their mistakes.
The Wheel Man
Unit 15 Bailey Brook Ind Est
Langley Mill
Nottingham
NG16 4BE
07950 697295
/ thewheelman.co.uk
/ thewheelman.co.uk
Lesson to everyone out there, always remember to drain your compressor tanks, if not your just filling your tyres full of water 😂
Remove valve core, Fill the tyre with 70psi, let the air pressure shoot the water out of the tyre outside👍🏻
Great job great video 👍
He’s back 🙌🏼
It took long enough 🤣
@JesseCollingham Who?
Serious question, but how does the water get in the tyre ?
We filmed this 10 weeks ago and we still haven’t figured it out. Made absolutely no sense 🤣
@@thewheelman.co.uk_ The valve cores were removed. You really are not very bright. I blame lead paint...
Good shout, my thoughts as well. Maybe condensation forming somehow ???
Quality work
Fantastic job, not far from you near Mansfield. Got an Audi S3 with lacquer starting to come away, almost like plastic. There is no wheel damage, can you give a rough cost estimate?
why are the wheel bolt contact surfaces powder coated? shouldn't they be completely bare (like the contact surface with the wheel hub) so that the contact surface is not affected by loose powder coating, only asking because the guys who do it for me hang the rim in the centering hole and put extra small balls in the holes so that the conical surfaces remain bare
What happened to PPE.
spectacular result
U done a cadburys purple
Yea we’ve got a Cadbury’s purple powder. We’ve filmed some content using that colour. Just need to finish filming it and get it edited. We’ll try and get it out early in the new year 👍🏻
@ sounds good to me
Id possibly say that the water has been caused due to water in the air system that has been used to blow the tyres up pretty common the air system needs bled often
Wrong.
@I_Am_Your_Problem no it's not mate
I don't get the point of this video!! Regardless wether the damage was done by the customers own hands or the customer driving the vehicle and kerbing them, a wheel refurb isn't just a set of wheels that come to you without a mark for you just to colour change. The price of a wheel refurb is to strip, repair/paint each wheel!! I don't understand the moaning about what the customer has done, he's sent them to you because his attempt failed but I'm sure you have had wheels way more damaged than these???
😂
the point is, he's trying to say don't attempt this at home kids or you'll end up taking it to a professional to do the job.
Nog niet
I guess kerbing damage is all on the outside edge and easy to reach and repair, while this stuff was down in the crevices of the spokes etc and harder to tidy up.
Can you refurbish the inside mine have been hammered by pot holes and all loosing air from the bead over a few days
You forgot to put the balance water back
🤣🤣
thought that was yianni in the thumbnail.
See you in the 30th 👍✌️ bet he’s broke the bead to mask the tyres and washed the wheels off 💦
I think he went at it with paint stripper and an axe 🤣
@ 😂😂😂🤦♂️
Hope you charge them extra £100 for the added work . Top job in the end