My Top 5 Favorite E92/E90 Coding Options (+ How To Install Them!)

Поделиться
HTML-код
  • Опубликовано: 7 окт 2024
  • Today, we're coding my E92 335i and adding some of my favorite comfort and euro features! To do this, you should be familiar with using NCS Expert, and I show you exactly what steps you need to take to take for each coding option. Below are some really helpful links, best of luck!
    As always, thanks for watching, and check out The Bimmer Barn Store!
    thebimmerbarn.com
    FULL E90/E92 CODING LIST - thebimmerbarn....
    Note: This video description contains affiliate links. If you click on one of them and make a purchase, I may receive a commission. This occurs at no extra cost to you, but helps keep the channel going!
    My K+DCAN Cable - amzn.to/2Pj32TR (affiliate)
    BimmerGeeks NCS Expert Download - www.bimmergeek...
    How to Setup NCS Expert (best video around, not mine) - • BMW INPA NCS Expert Wi...
    0:45 Getting your Car Ready to Code
    2:26 Adaptive Headlight Disable
    3:51 Key Fob Window Closing
    5:58 E9x Velocity Gauge
    7:37 Euro Hazard Lights
    9:00 Windows Up Safety Disable

Комментарии • 68

  • @OURBENEFACT0RS
    @OURBENEFACT0RS 2 года назад +1

    Great video! On my vehicle (2006 325xi with FRM1 aka FRM) the option to keep the windows rolling up is named just TUERAUF_STOP_MAUT (not FH_TUERAUF_STOP_MAUT_3R) , so it looks like the naming was changed slightly between FRM versions.

  • @GoWstingray
    @GoWstingray 2 года назад +1

    Hi Mr Barn, thanks for the video showing options, recently got the software installed and a K+DCAN cable, one thing I found helpful being a newbie was using NCS Dummy to manipulate the trace file as it translates the options into meaningful English, I know you have to select the correct firmware for you module but that’s easy to get.
    One option people might want to turn on if turning on the digital speedo, is either true speed or the corrected speed so it matches the analog dial, you might not of seen this using notepad if your only looking for a specific option. Also not sure if it’s there for everyone as my car is a LCI.
    Thanks again, I’m eager to explore more options and want to add the Professional radio option to my vehicle so hunting for the procedure and codes to add.

    • @OURBENEFACT0RS
      @OURBENEFACT0RS 2 года назад

      On my car the speedo correction option was already set to "aktiv" for both the digital and analog gauges, even when the digital gauge was disabled. So, unless this was messed with previously (unlikely!), you shouldn't need to change anything besides the one setting to enable the digital readout.

  • @Nico_335i_DCT
    @Nico_335i_DCT 3 года назад +2

    Very nice Chris. I did these, plus enabled gong when opening the door with key in dash. And coded folding the mirrors on Fob and CA too. And probably I'm coding out the mirror auto dim. They are too dark too see enough when passing at the high way. Dutch regards, Nico.

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад +1

      Good choices! I like the gong with door open because I'm always locking myself out of my cars lol

    • @verreari
      @verreari 2 года назад

      Hej Nico_e39_335i_DCT , Mike here (IJmuiden), today we tried coding my E92 but it failed all together in coding any option at all ... you got any ideas?

    • @Nico_335i_DCT
      @Nico_335i_DCT 2 года назад

      @@verreari Hi Mike. Maybe you use the wrong cable. a lot cheap Chinese obd cables do not work. And I use the Bimmergeeks BMW tools. I had some problems because of a weak old battery when I started coding. After changing the battery(90Ah agm)and a strong better charger I had no coding problems at all. Cheers Nico.

    • @OURBENEFACT0RS
      @OURBENEFACT0RS 2 года назад

      @@verreari Did you open INPA to make sure the cable was connected correctly? If not, you might need to set the COM port and latency in device manager. There are other videos about how to configure a K/DCAN cable for use on a windows machine, look for those instructions.

  • @cupompa
    @cupompa 2 года назад +1

    Can you do a video on TPMS Disable feature?

  • @cwallace7623
    @cwallace7623 Год назад

    Great content! Where can I find the list for my car on what I can code on my E82?

  • @ม่วนกรุบ
    @ม่วนกรุบ Месяц назад

    I installed Fan cooling Ecu in e90 N46n. It only works once at startup. Do I need to code it?

  • @rayray3009
    @rayray3009 3 года назад

    A popular re code in Wisconsin is to 'euro-tune' and remove the cats for a few extra HP. Have you every tried this mod? or do you guys have to pass emissions?

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад +1

      This car has "performance" downpipes currently, but no tune yet.

  • @AnimeTechs
    @AnimeTechs 2 года назад +1

    Are you able to do this all with BimmerCode? I did the adaptive headlight with the same tool u have and a pc but what Im wondering is am I able to get the adaptive lights back on without error on gage? I want to replace the day time running lights with the adaptive halo lights and I noticed you can do that with bimmercode. I just don't want the error to be displayed if I do this

  • @HectorHernandez-ni6zd
    @HectorHernandez-ni6zd 2 года назад

    I'm going to be installing the factory alarm system in my 2007 E90. (pre-wired)
    How can I code in the alarm to activate it?

  • @chrisr3908
    @chrisr3908 2 года назад

    Hi mate I have a cornering light fault that I have been unable to code out. Can you tell me which module or modules I need to change. My car is a e90.
    Thanks

  • @islandjeeps921
    @islandjeeps921 3 года назад

    You could do a lot and more of this stuff with Carly...

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад +1

      That's right, but I'm a little old school and this method is basically free if you already have the cable, and you don't have to pay for a subscription! The Carly adapter is great though, maybe next time you can lend me yours :)

    • @DanielScariti
      @DanielScariti 3 года назад

      Carly is more expensive and not might not have as much customization

    • @OURBENEFACT0RS
      @OURBENEFACT0RS 2 года назад

      Carly is really expensive for what it is; It doesn't do more than a windows computer + K/DCAN cable. The main (and arguably only) benefit is that it requires less setup and research. It is a fancy UI for people who are not computer savvy and will pay their way out of it.

    • @TheFrenchPug
      @TheFrenchPug Год назад

      You can't remove the Adaptive Headlight Error with Carly. But you can do those other codes.

  • @samyb2834
    @samyb2834 3 года назад +1

    Hey Chris, I have a question regarding my E90. I'm trying to make this car as reliable as possible. I have changed: the coolant flange with a metal one, the radiator, the upper radiator hose, the water pump and thermostat and oil filter gaskets. Anything else I should change in your opinion? Thank you,

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад +4

      That sounds like all the common stuff! There's tons of stuff you could do preventatively, but I'd recommend starting on the stuff that looks oldest/original. Low pressure fuel pump failures are common, oil pan gasket, and engine sensors will fail all the time too! But to save your wallet, try to just address things one at a time lol :)

    • @samyb2834
      @samyb2834 3 года назад

      @@TheBimmerBarn Thank you Chris, very kind of you.

  • @isrealperez9069
    @isrealperez9069 Год назад

    I would like to know what kind of operating system can I use this program with I have Windows 7 on one of my little computers when I used to have BMW 1.4 scanner now because I have upgraded to an E90 I want to know more about this cuz I too have that adaptive headlights but my headlights are LCI

  • @diegohooker
    @diegohooker 3 года назад

    Nice! Might have to try some of these on my e92!

  • @isrealperez9069
    @isrealperez9069 Год назад

    How to code the window up with fob

  • @dakibmw
    @dakibmw Год назад

    Honest question: why would you disable adaptive lights (as in why e9x crowd like to do that, what are the advantages)?

    • @DrongM
      @DrongM Год назад +1

      because after some time, just short time after you though you won´t need it, your adaptive headlights will stop working properly due to some micro corrosion or other unidentified failure. And you will realize that benefits are not worth of money and time to fix it.

    • @xr500t
      @xr500t Год назад

      In my case, I changed to aftermarket lights.

    • @HazyTrails
      @HazyTrails 8 месяцев назад +1

      @@DrongM Yup I'm at that point right now 😂

  • @AndymacNi
    @AndymacNi 3 года назад

    Chris can’t you do the folding mirrors option with that computer??

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад

      I tried, but that option doesn't work for 2010 models for some reason!

    • @AndymacNi
      @AndymacNi 3 года назад

      Ok thx✌🏻🙏🏻

    • @OURBENEFACT0RS
      @OURBENEFACT0RS 2 года назад

      @@TheBimmerBarn Maybe this option requires the FRM3 module? There are 3 possible FRM depending on the build date.

  • @tonyher6
    @tonyher6 2 года назад

    Hey Chris , i have a active steering malfunction and the light on my dash and I’m wondering how to fix that .

    • @OURBENEFACT0RS
      @OURBENEFACT0RS 2 года назад

      Steps to reset steering warning (this often shows up after disconnecting the battery). 1. Start the car (engine on). 2. Turn the wheel all the way left, then all the way right. 3. Thanks BMW, your steering error is gone. Doing this procedure calibrates something and makes this error go away in most cases. If it doesn't go away after doing this there could be an actual hardware issue.

  • @patrickrice6752
    @patrickrice6752 3 года назад

    Can you do a video on coding a lcm module to pick up led lights on a e39 that does not have the lci module from factory

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад

      Yes, once I get my hands on a set of those lights! haha

    • @patrickrice6752
      @patrickrice6752 3 года назад

      @@TheBimmerBarn I know where there is 4 e39 in a salvage yard out in Dallas.... One of the cars got a set of sport seat in black that im getting in a few weeks.... Where I got my lights from

  • @woog74
    @woog74 2 года назад

    My adaptive headlight was out completely on my E92 coupe. I fixed the light, but only the halo, and parking light light up, the lights themselves still will not turn on. If I plug it into the other plug, the light works fine. Will coding out my FRM make the light work again?

    • @TheBimmerBarn
      @TheBimmerBarn  2 года назад

      You need to do a short circuit reset on the FRM to make that circuit power on again. Something you can do in ISTA or other dealer tools.

    • @woog74
      @woog74 2 года назад

      @@TheBimmerBarn Thx for the reply. I will look into that!

  • @X11CHASE
    @X11CHASE 3 года назад

    I heard they recently discontinued new downloads of INPA?

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад

      I think you can still get old versions of the software from Bimmergeeks, that's where I downloaded mine!

  • @Fancy669
    @Fancy669 9 месяцев назад

    I have a e90 but i dont see e90 in the list?
    Please help

  • @frodes82
    @frodes82 Год назад

    I have only FRM , not NFRM . It is the same ?

  • @Random.Adventures.
    @Random.Adventures. 3 года назад

    hi can i code these with my car engine on?

  • @markt9438
    @markt9438 3 года назад

    can you re-calibrate !?

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад

      re-calibrate what?

    • @markt9438
      @markt9438 3 года назад

      @@TheBimmerBarn okay you can investigate codes you can turn codes off you can adjust certain trim items but recalibrating software issues like for instance brake calipers that are worn they can be recalibrated by software properly to bring them down to a hard pedal stuff like that That's what I'm talking about

    • @OURBENEFACT0RS
      @OURBENEFACT0RS 2 года назад +1

      ​@@markt9438 No such thing on this car. They have a normal hydraulic system. The ECU doesn't affect anything braking feel in this car (ABS notwithstanding). If your pedal is feeling soft you might just need a brake fluid flush, not uncommon for moisture buildup to happen after a few years.

    • @markt9438
      @markt9438 2 года назад

      @@OURBENEFACT0RS yes I'm slated for a brake flush soon suspect my grommet is leaking as I have high long-term fuel trims once I come to a stop parking it while driving on the road it fluctuates but mostly it's only about three or four

  • @rastik5452
    @rastik5452 Год назад +1

    I understand you may not dameged anything yet, but how you can charging batery right to battery and the car? That is like almost first not to do instruction, if you learning about how to work on your bmw without damaging it even more. Is there reason, why you doing it? Its just so unprofessional, i dont what watch more, just because this mistake.

    • @RicBergstrom
      @RicBergstrom Год назад

      Are you saying not to connect a charger to a battery directly? The battery doesn't care. The hydrogen it can put off MAY ignite but you aren't going to hurt a car attaching a charger to a battery or a charging post.

    • @rastik5452
      @rastik5452 Год назад +1

      @@RicBergstrom Battery doesnt care, thats true, but theres a thousand of warning of doing this, because you overvoltage the whole car. At least one big reason for all.. if you can charge your baterry conected to the car from trunk, why the fuck would bmw put the "charging points" to the engine bay? Just.. go and read some examples what can happend... i woud never do this...

  • @embeddedusystems
    @embeddedusystems 3 года назад

    Ncs dummy?

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад +1

      I'll probably show how to use that in a different video, maybe on my e39. Definitely does help view all your possible options, and makes the coding process a little different 👌

  • @Bchara-Knio
    @Bchara-Knio 3 года назад

    hello I hope if you can help me with the Aux coding it disappeared from the radio

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад

      If you already had the option fitted, and the aux option is gone, you may have a bad mulf module, or aux connector. Good luck!

    • @Bchara-Knio
      @Bchara-Knio 3 года назад

      @@TheBimmerBarn well actually when i removed the negative battery cable and reconnected it the aux option is gone

    • @TheBimmerBarn
      @TheBimmerBarn  3 года назад

      @@Bchara-Knio Weird, might want to try diagnosing using a scanner, or bring it to a shop that can re-code it for you

    • @Bchara-Knio
      @Bchara-Knio 3 года назад

      ok bro thank you

  • @Elferiamoney0333
    @Elferiamoney0333 16 дней назад

    can I do a ews resync with this?