love how much effort and how much details you put in this video, it really helped me a lot as am trying to understand all this diagnostic/coding applications for the BMW thank you so much
hey man, I am trying to import the. trc file into dummy, it says unresolved function keyword "bremslichtschalter" make sure chassis and module are correct... however if I import nettodat.trc I can get it to read on bc1 05 but not 02 or 03? any idea? can I just edit text file manually and flash that back?
Great video, thanks. Was struggling to understand NCS Dummy. Couple of questions though: when you first read existing ECU data, I'd been hitting "Read ECU" on F4 instead of changing job to "codieren lesen" and then "Execute Job". Is this wrong? The other - when NCS dummy loads up the .TRC file, I click the drop down for "Module" and I don't see the same ECU modules I do in NCS Expert - e.g. there is no "CAPPL" module in there, and there are multiple CAS modules. Why is this? Really appreciate your help!
Question I didnt have on my bmw e46 bc button on left side, so i installed it but now i need to code it, where in NCSExpert i can find where to activate BC button from there and see if it works ? What modue does that bc button belong inside ncsexpert ? Thx in advance
In the list of modules you always choose CAS.C05, but you have other CAS modules available. Why did you choose that one? How to know which one should be used?
hey friend, thank you for these huge information. you are so expert, is this just coding or I should install a hardware too to make the passive entry -Access enabled? thank you for help.
Very nice video,why you didn't activate the passive Go too? My problem is that my passive entry don't work but my Go is working. So i will check first in the Dis for errors and in ncs expert for the coding. But I'm afraid that i have to take out each door handle to check the antenna wires,if one handle is broken then all doors won't work i think.
I follo the steps. Load profile .. f1---f3--chasis my is e90 then cas then f6. But after this wont give me the option. F4. To process ecu. Only gove me option **f3=process car*** What do you think is wrong ?
i dont have the nxs expert profile only the default profile and when i try to edit it with the password rexpet it doesn't pop up the menu where i can edit the profile
Thank you, thank you, thank you!! I've watched other videos that jump all over and leave steps out and then want you to pay for the "real video". Uh, no thanks. How am I to know that your "real" video is any better. I'd rather just share the knowledge I have and you've done exactly that!! Great job :D
when i choose to lessen a file can i turn off the car and come back alter with the finished file or i always need the car on and plugged in while editing?
Hi, that was a great video. Please can I ask where I can get the NCS Expert profile from? I have all the software but only the default and NCS Dummy profile.
Friends, I think I did a wrong reset. When I locked the vehicle with the remote and got off, it took about 5 minutes. It doesn't open with the remote. Open with the key. After that, the remote unlocking is activated. And only the frame lights of the radio are on.
great video mate! any idea why when i try it on dummy it doesn't give me the option to tick or untick any boxes? its bugging the hell out of me, so technically i cant code anything!
Bro im useing frm module second hand from same type bme e90 the frm settings are same dont need to modify TRC file can i just code it without modifying the TRC FILE?
Hey is it possible that u could make video about how to install NCS expert and how to setup whole system for complete newbies like me? I have looked on youtube and there are hardly any videos about it.
+ecologicaltime Cheers mate that would be very helpful. I am actually looking for ncs expert package to download but cant find anywhere. I tried to download from ncs-expert website but that didnt work and setup keeps failing. Most of the guides have older info which doesn't help either :(
Look look look, it's all in the way he says "here" [heeyah] and "place" [plyce]... so if I were a betting man, I'd guess hes South African. Not the goddamn terminator! PS great video, probably saved us ideots a bit of time and from bricking our ecu's. Haha
Great video got my car coded! Just had a quick question, as I was exiting NCSDummy he said that it recommends me to erase the FSW_PSW.MAN Folder which I click to confirm to erase that. Just want to make sure I was okay erasing that. Thanks!!
you can erase it. Just remember that before running SG_Codieren, always make sure the MAN file has the correct data in. Thats why the NCS asks to wipe the file clean so that you dont accidentally code another module with the wrong data
I don't have any "check boxes" in NCS DUMMY. It just translates. I give up soon.. After i read the module I only get a notepad file and when I'm trying to save the file as "MAN" I'ts still just a notepad file and it's not saving my changes after i execute job.
@@ecologicaltime I tried import a "empty" MAN file, then I got the check boxes but every box was unchecked. But I think I found a way.. gonna do some testing later 👍 My biggest problem though is that the files never converts to "MAN" files. It's just "FSW_PSW" as notepad files.
you are really not helpful in the way you navigate and select menu items. If you had used just a little more time, you would have saved me a lot of time.
one of the best explanations of how NCSExpert and Dummy work together. Thanks you!
love how much effort and how much details you put in this video, it really helped me a lot as am trying to understand all this diagnostic/coding applications for the BMW thank you so much
One of the best coding videos for beginners! Thanks!
Finally I've found a proper instruction. Thank you so much! It easy to understand and straight forward.
Great, comprehensive and slow enough for the first-timer to follow. Thanks!
Very well explained.
The best video for beginners that I found on RUclips. Thank you very much.
I used this video to code my E60. Excellent video, great steps, very clear and detailed. Thank you so much for taking the time to make this video
Which year of bmw e60 do you have ? and which obd cable are you using ? any links for buying it ?
Absolutely amazing video. Thanks so much
Great stuff SAFA brother, very easy to follow, keep up your vids as they are super helpful :-)
Glad to hear that!
Nice job...good overview/example
hey man,
I am trying to import the. trc file into dummy, it says unresolved function keyword "bremslichtschalter"
make sure chassis and module are correct...
however if I import nettodat.trc I can get it to read on bc1 05 but not 02 or 03?
any idea?
can I just edit text file manually and flash that back?
Thanks for a very very clear explanation.
So much makes sense now, thanks !
Very well explained. Thank you!
Very well explained well done thank you
very good explanation, many thanks
how did you get expertmode on you profile to select?? mine doesn't show it
my comfort access not working on doors but it not working aswell as push
start without inserting key- do u think it might be something else
does this work for BMW f01 models what is a 2009 750
Great video, thanks. Was struggling to understand NCS Dummy. Couple of questions though:
when you first read existing ECU data, I'd been hitting "Read ECU" on F4 instead of changing job to "codieren lesen" and then "Execute Job". Is this wrong?
The other - when NCS dummy loads up the .TRC file, I click the drop down for "Module" and I don't see the same ECU modules I do in NCS Expert - e.g. there is no "CAPPL" module in there, and there are multiple CAS modules. Why is this?
Really appreciate your help!
how do you activate the fuel pump for e39 on ncexpert
Great video. Very informative
Question
I didnt have on my bmw e46 bc button on left side, so i installed it but now i need to code it, where in NCSExpert i can find where to activate BC button from there and see if it works ? What modue does that bc button belong inside ncsexpert ?
Thx in advance
Man very good video 👌👍helped a lot.
just what i was looking for, cheers
In the list of modules you always choose CAS.C05, but you have other CAS modules available. Why did you choose that one? How to know which one should be used?
An excellent video thankyou Sir
hey friend, thank you for these huge information.
you are so expert, is this just coding or I should install a hardware too to make the passive entry -Access enabled?
thank you for help.
yussus boet I so dig your accent! and a great video
Hey! do you also happen to have a video where a replacement JBE is coded? don't want to mess it up... :D
thanks for a better explanation for novice...
excellent video well done
very detail~ thank you
Very nice video,why you didn't activate the passive Go too?
My problem is that my passive entry don't work but my Go is working. So i will check first in the Dis for errors and in ncs expert for the coding. But I'm afraid that i have to take out each door handle to check the antenna wires,if one handle is broken then all doors won't work i think.
I follo the steps. Load profile .. f1---f3--chasis my is e90 then cas then f6. But after this wont give me the option. F4. To process ecu. Only gove me option **f3=process car***
What do you think is wrong ?
Very very good!
You need to set your latency at 1 in your com port for best performance and stability.
Grate job!!!
Helpful video!
Can u help me i change my radio on a bmw x5 e70 and I just need to coded the GPS cuz is not working so can u please help me with that
i dont have the nxs expert profile only the default profile and when i try to edit it with the password rexpet it doesn't pop up the menu where i can edit the profile
hi good video
Crazy,i have a small Victorinox too :))
well done man
Thank you, thank you, thank you!! I've watched other videos that jump all over and leave steps out and then want you to pay for the "real video". Uh, no thanks. How am I to know that your "real" video is any better. I'd rather just share the knowledge I have and you've done exactly that!! Great job :D
thank you, i try to make the videos step by step
HOW DO YOU GET THE EDIABAS SERVER , CUZ I HAVE ALL THE SOFTWARE BUT NOT EDIABAS SERVER? CAN YOU HELP PLEASE MANY THANKS
We wait you to BACK, and you WILL BE BACK. Once a terminator always a terminator.
very good
hello friend., is the NCS dummy program comes with ncs original program or seperate?
thanks
separate, i got the dummy off a forum
Did your car not have comfort access from factory? So they have the module in the car and it just needs activating?
had comfort access
THANK YOU MATTE!
Good video. Not sure I’d activate that feature though as it makes it easier to steal
when i choose to lessen a file can i turn off the car and come back alter with the finished file or i always need the car on and plugged in while editing?
car is not fully on, its just in the auxiliary position and yes it must have the onboard computer on.
When you work with WinFKP to code, do you start the engine completely or just leave the engine on IGNITION ON only?
sorry i cant recall.
life saver
Hi, that was a great video. Please can I ask where I can get the NCS Expert profile from? I have all the software but only the default and NCS Dummy profile.
please check BMW forum and search for the NCS expert. www.bimmerfest.com/forums/
Friends, I think I did a wrong reset. When I locked the vehicle with the remote and got off, it took about 5 minutes. It doesn't open with the remote. Open with the key. After that, the remote unlocking is activated. And only the frame lights of the radio are on.
GET DOWN!! GET TO DA CHOPPAR !!!!!
subbed
great video mate! any idea why when i try it on dummy it doesn't give me the option to tick or untick any boxes? its bugging the hell out of me, so technically i cant code anything!
select the next option in the list.
How did you start the Ediabus Server?
it starts when you launch the INPA software
good
Please can you tell me what I do with this problem I have. My mini r55 has a stereo from another mini. BMW can't recode it. Can it be done?
my Inpa doesn't have the chassis in there. your too,do you know why???
😂 u r funny - if you don’t write which chassis do you use - how he can answer???
Hi please tel me sir if the cas dont need coding for settings can o just code it without doing the trace file settings with nc xpert?
dont understand your question. Settings? vs Coding? what settings
Bro im useing frm module second hand from same type bme e90 the frm settings are same dont need to modify TRC file can i just code it without modifying the TRC FILE?
great video, thanks. Do I use it for f series as well?
can i use this softwares for my bmw f series?
no this was e series
Why were those settings disabled in the first place?
That question should go directly to u r own BMW Dealer...
There is a lot of more features which are not used...
Hi there,
Is this work on bmw f series?
no its e series
Hey is it possible that u could make video about how to install NCS expert and how to setup whole system for complete newbies like me? I have looked on youtube and there are hardly any videos about it.
+harshsmi i should have done that when i installed mine years back. I am going to get a new tablet. When i do, ill install all this on and do a video.
+ecologicaltime Cheers mate that would be very helpful. I am actually looking for ncs expert package to download but cant find anywhere. I tried to download from ncs-expert website but that didnt work and setup keeps failing. Most of the guides have older info which doesn't help either :(
harshsmi i dowloaded it from a bmw forum a few years back
Hello, adaptive headlights eror disable for Please Put video
Head to the Chopper!
Look look look, it's all in the way he says "here" [heeyah] and "place" [plyce]... so if I were a betting man, I'd guess hes South African. Not the goddamn terminator!
PS great video, probably saved us ideots a bit of time and from bricking our ecu's. Haha
yes South African
Great video got my car coded! Just had a quick question, as I was exiting NCSDummy he said that it recommends me to erase the FSW_PSW.MAN Folder which I click to confirm to erase that. Just want to make sure I was okay erasing that. Thanks!!
you can erase it. Just remember that before running SG_Codieren, always make sure the MAN file has the correct data in. Thats why the NCS asks to wipe the file clean so that you dont accidentally code another module with the wrong data
I'll be back!
I don't have any "check boxes" in NCS DUMMY. It just translates. I give up soon.. After i read the module I only get a notepad file and when I'm trying to save the file as "MAN" I'ts still just a notepad file and it's not saving my changes after i execute job.
i think you are selecting the wrong option in NCSDummy, sometimes there are different sub options. Try different ones until you get the check boxes.
@@ecologicaltime I tried import a "empty" MAN file, then I got the check boxes but every box was unchecked. But I think I found a way.. gonna do some testing later 👍 My biggest problem though is that the files never converts to "MAN" files. It's just "FSW_PSW" as notepad files.
Update: now I got it! I saved the file in "save as" and saved it as a MAN file. Then it worked.
@@estranged85 thank you tox. I'm beginning to comprehend that I don't understand coding. But. I can buy and wreck another car.
Or buy a 22k Honda.
you are really not helpful in the way you navigate and select menu items. If you had used just a little more time, you would have saved me a lot of time.
🤔 you know that you can stop the Movie on RUclips with using the || ?