How To Get The PERFECT Miter Angle On Baseboard EVERY TIME! Tool Every DIYer NEEDS!
HTML-код
- Опубликовано: 22 июл 2024
- ITEMS I USED ON THIS VIDEO:
- Miter Protractor (SAKER) - amzn.to/3P2Vmz3
- Miter Protractor (LEXIVON) - amzn.to/3FoTD2r
- Baseboard Super Glue With Activator - amzn.to/3P5IeJg
- 2P-10 Super Glue - amzn.to/3MXGYpM
- Miter Saw - amzn.to/3vRgpwV
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
On this episode I'm going to show you How To Get The PERFECT Miter Angle On Baseboard EVERY TIME! You’ll get that flush Professional fit every time! This works with crown mouldings too! This tool every DIYer NEEDS!
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#Baseboard #Miters #Crownmoulding 
Хобби
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
I am about to do this in hallway, love how easy you make it. Gonna go buy the tool asap before project . Thank you
I’m glad I could be of help! 🙏🏽😊
Great video
@@lzs19860610 l
I am doing my baseboards for the first time this summer and this tool will help greatly! thank you!
A pro tip I learned years ago, if you add +0.5-+1 degree to your outside cuts and -0.5-1on inside cuts, this will allow the points to meet first and with some pressure, they'll flex into a perfectly flush fit.
You will also want to calibrate your mitre saw's mitre gauge using that protractor as your reference since most saws aren't perfectly calibrated/square either. Always best to stick to one measuring tool unless you're dealing with precision instruments
That's ok with timber, MDF is a completely different story 😜
Thanks man for making this video I just came across your page, as I'm 1st year Carpenter apprentice in high rise and its been a challenge with these miter cuts, I will look into the tools that you mentioned. Have a great one!
One of the best videos I've ever watched. Very practical, good explanation. Thanks.
Amazing! I wish I watched your video before I struggled with molding miter cuts, got disgusted and started caulking the open seams! I’m getting this tool!
You are the bomb my friend! Easy to follow instructions. Crystal clear. You make it so easy
This is beautiful the way you use that tool to get an accurate inside and outside cut, and thanks for demonstrating and sharing how to use this tool.
Thank you so much for the feedback! 🙏🏽😊
Just finished a project and needed this tool. Thank you for the excellent video(s) as it is most helpful.
This is a grate product and makes your job alot easier, I truly appreciate your videos they are great and very helpful,thank you so much you are a excellent teacher.
Awesome instructions! Thank you... Now, I'm ready to install my baseboards.
best video on this product.. you show how we all assume 90' and how off they are... then try to tweak and waste boards. great vid on how to use!
Ez breeze explanation! wow simple. I've watched tons of videos and nobody nailed it like you did. THANKX!
Thank you so much Rick! Means a lot! 🙏🏽😊
This was a great explanation…I am putting in new baseboards and will follow this.
Awesome video, easy to understand, clear and to the point.
Excellent video! You put instructions In laymen terms, easy to understand with excellent results. Cheers.
Thank you Jonathan for the feedback! Means a lot! 🙏🏽😊👍🏽
Looks great and I love the Saker miter gauge too as it would make cutting miters so much easier!👍
Good tips. My added tip... make sure your miter saw is adjusted and working properly before you rely on the angle scale & detents, as well as cutting perfect 90 degrees horizontal & vertical when returned to its "home" position. It will and does get knocked out of position, especially portable saws.
Awesome tool. Thanks for showcasing it.
I like the storage shelves you had behind you in the garage at the end.
I just shared on my fb, post too , I read about that miter protractor it’s got great reviews and high quality aluminum with engraved writings so they stay on to read. Thanks for this great detailed video on moulding
Awesome video. Thank you for your time spend on explaining this awesome tool
Yeah, I always overlook that particular scale. It does make it easier.
Thank you for explaining very well
You are an amazing teacher! Keep it coming...
The carpenter God put your video in my feed 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾!
Thanks, this makes it easier for a beginner Diy'er like myself.👍🇺🇸🙏👌
Thanks. I love your clear tips to make DIY easier for us.
Thank you so much! 🙏🏽😊
Thanks .. looks easy with the right tool
Quick little pro tip for ya. I like what I see just if you are using the saw for a lot of cuts try to not flip the baseboard to the back side. Doing this can chip out the outter spot of the baseboard. Instead flip it upside down.
My miter only goes to 45, how am I supposed to do the cuts when the tool says 49?
@@206Nish what i would do is cut a piece of wood to like 10 then put that against the fence and then put the board against that and cut it at 39 indicated. if you put the piece in the right spot on the fence you should have your angle.
@@Grunttamer thanks, I just watched a video where a guy does exactly that
@@206Nishcan your the link please
Excellent video. Very helpful.
Thanks, this has been of great assistance
Found this video while trying to figure out how to cut an aluminum channel for some LED strips, this is exactly the tool I need for an weird angle I have in a room!
Got the lexivon one, really great for any angle measurement work.
My friend this is good job you did .
Dude, thank you for showing this tool. I bought one and it save me a lot of guessing. Thanks again man
I’m glad I could be of help Pao! 🙏🏽😊
Yep, I was doing 45°, after 4 tries I gave up and resorted to You Tube; thank you, really helpful video! 👍
Thanks for the video!
I need to install over 400 linear feet of 5½" square baseboards. Finish carpenters are quoting $70-$80 per hour to install. I've installed baseboards before but the miter cuts have always caused me trouble. Now I see why. Thanks for the video tips fo this DIYer!
Thanks that was awesome info, God Bless!
Extremely helpful!
Great Channel thanks for all the great tips👍👍
Thank you, Sir, for the lesson!!
I have a Hitachi C10FSHC 10" and I'm trying to miter cut 5.5" wide boards...but the boards don't fit in the upright placement (flat against the fence) that you're cutting yours. On top of that, the saw maxes out at 45 degrees when tilted.
Great video, tho. I looked at many others and yours was straight to the point! Thnx!
Fantastic video. Thanks for posting.
Thank you too!
Great tutorial. Thank you so much 👍👍
Thank you for watching! 🙏🏽😊
Thank you very usefull tools
Ty! Just learning!
I’m glad I could be of help! 🙏🏽😊
Great video as always 👍🏽Would love to see a video on different types of CA glues and when to use which types. Keep up the great content.
Thank you so much! You fave me another video idea! Thank you! I’ll do one soon! 👍🏽🙏🏽😊
I think you are perhaps the best DIY'ER that I have come across. Your demonstrations and explanations are clear and concise (ideal). Than you!
Thank you so much! Really means alot! 🙏🏽😭
This video was perfect for me where have you been Thank you so much ❤❤❤❤
I’m glad I could be of help Margaret! 🙏🏽😊
LOVE THIS!! Getting ready to do a house myself and all your tips are awesome!!! TY
Thank you so much!
Hello Mr. Peters! Great news you have won this videos Giveaway! The other subscriber did not respond so you are next in line to be the winner! Congrats! Please email me to claim your product! Here is my email : Fixthishouse1@yahoo.com . You have 3 days to claim 👍🏽😊
@@FixThisHouse sent you an email 😁
Excellent video! Extremely helpful!
Thank you for watching! 🙏🏽😊
Great video!! Thanks so much.
Thank you for watching! 🙏🏽😊
Awesome review man
Great video. 🙌🏻
Great video man!
I sudb because of this one video alone thank you
Thank you very much new subscriber
Good job! You made it easy to learn. I can't wait to try it out
Thank you! It’s super easy and you’ll be making those miter cuts like a pro in no time! 👍🏽😊
Awesome way of doing mitres although I always scribe my internal mitres.
Thank you so much for the video this really helped me a lot I like the way you explain everything I never have a question after I watch one of your videos awesome work brother thanks
Thank you so much for the love and support! Your feedback just made my day! 🙏🏽😊
Well done
Anyone tryin this … you should calibrate ur saw. All you need is a small square and there are probably large Alan’s …. You loosen them and our saw at 0 and use the square to make blade perfect. Then tighten down ..
Great job brother!!! 💪👍🙂
Good stuff. Thanks for this video.
It was my pleasure! 🙏🏽😊
Thank you
Exellent thank you.from florida.
You are very welcome Roberto! It was my pleasure to help! 🙏🏽😊
Thanks for the great video.
Thank you for the love and support! 🙏🏽😊
I own this tool! Makes me look like I know what I’m doing haha
Dude, you're awesome! And I'm a handyman.
Thank you so much George! 🙏🏽😊
Aha! So that's how it works. The miter angle on that tool is used any time two pieces are joined together. I like that it's made out of aluminum rather than breakable plastic.
So good thanks
Thank you!
Your so awesome thanks for showing us this video
Thank you for the love and support! 🙏🏽😊
Great tip thanks 👍
Thank you! 🙏🏽😊
Great video, great tool ...
Awesome.
Pretty cool
Nice video 👍👌. Now I’m gonna try do it my self
Thank you! 🙏🏽😊
Thanks.
You're the best.
Would that tool work well with cutting miters on quarter round for baseboards?
Great video as usual!ty
Thank you 🙏🏽!
This product is awesome! So many tools, such few money xD Thanks for the presentation again!
Thank you brotha! Don’t worry I’ll be doing more giveaways! 🙏🏽😊👍🏽
@@FixThisHouse You're helping a lot of people with these giveaways. Great idea and much respect to you bro!
Perfect!
Nice video strait to the point.
Thank you so much! 🙏🏽😊
This guy is awesome
Thank you Jackie! 🙏🏽😊
He is a good teachers unlike those who come with 30 experience and long talks in the end do not say nothing.
👍
Thank you so much for the love and support! 🙏🏽😊
great job
Thank you! 🙏🏽😊
Nice video as always
Thank you 🙏🏽!
I have a 10" evolution.miyer saw and I can't cut my trims that are 5.5" vertically like you did. I need to tilt the saw on a 45 degrees angle and cut with the trims facing down. My max angle is 45, how can I cut 46 or 47?
Yup like a glove!
Awesome!
Thank you 🙏🏽
This video is aces! Thank you. I think you just saved me from 10 Tylenol pills tomorrow lol
Lol! Thank you so much! I’m glad I could be of help and not make you take 💊! 🙏🏽😊👍🏽
You’re the best!!!
Thank you so much for the love and support! 🙏🏽😊
will this method work on shoe trim as well?
Does it works for round corners ?
Nice!
@fix this house Do you have a video for crown molding using this technique?
Ayos tol