Mr. Barbour, Sir --- as always your attention to detail, your efforts at presenting a concise and clear block of information, and your calming tone of delivery, have been greatly appreciated over here in California! Thanks!
Hay can you help me with my 2014 Ford focus. I have checked all relays fuses and alt is good and Starter is good. Saying starting system fault.@@BarboursAutoHelp
I changed my valve cover and the exhaust side hole for the cam position sensor has an inward taper at the top of the hole. So my cam sensor cannot sit flush like the front. Is there another sensor I can use?
I was wondering if you can help me. I have code PO333, PO68A, P068B. I jumped my battery for the past 3 days due to it dieing overnight because I let the access port in overnight. The car now shuts off while driving. Any help would be appreciated
My. Ford Focus had some work done such as the harmonic balancer and a crankshaft pully however once those were replaced my engine light came on and I got a code saying it’s the camshaft sensor, that was also replaced, and the error is still occurring. Will there ever be a fix for this? Idk if the shop may have caused this
@@BarboursAutoHelpI'm having something similar, I replaced the valve cover gasket so, after everything was put back together, all of a sudden I got the check engine light on so, I scanned it and it's giving me code P0013 ( B Camshaft position actuator A control circuit/Open bank 1). Would that be the selenoid or the chamshaft sensor??
I am having codes P0320, P0344, P0369, P061C, and P1336. Have replaced both camshaft and crankshaft sensors but still get the fault codes and the car won't start. Do you have any tips? I'm almost giving up on this car.
@@BarboursAutoHelp I have a 2016 Ford Focus SE and has the following codes P0300 - Random Misfire P0301 - Cylinder 1 Misfire Detected P0304 - Cylinder 4 Misfire Detected P0316 - Misfire Detected on Startup (First 1000 Revolutions) I've replaced the spark plugs and swapped Coils 2 and 3 with 1 and 4 and they came back I'm thinking it might be these Camshaft Position sensors based on some research. Do you have the part numbers?
Mr. Barbour, Sir --- as always your attention to detail, your efforts at presenting a concise and clear block of information, and your calming tone of delivery, have been greatly appreciated over here in California! Thanks!
Thanks for the compliment! Good luck to you.
Hay can you help me with my 2014 Ford focus. I have checked all relays fuses and alt is good and Starter is good. Saying starting system fault.@@BarboursAutoHelp
Is intake and exhaust sensors the same part?
Thank you for your video and explain
I changed my valve cover and the exhaust side hole for the cam position sensor has an inward taper at the top of the hole. So my cam sensor cannot sit flush like the front. Is there another sensor I can use?
Same on 2012 Escape ?
Thank you
You're welcome
Would this be the same set up as the 1.0? , Where would I find bank B for the camshaft position sensor ?
Code on mine from AutoZone says P0339. 2018 Ford Focus. CPS A Circuit Intermittent
I was wondering if you can help me. I have code PO333, PO68A, P068B. I jumped my battery for the past 3 days due to it dieing overnight because I let the access port in overnight. The car now shuts off while driving. Any help would be appreciated
My. Ford Focus had some work done such as the harmonic balancer and a crankshaft pully however once those were replaced my engine light came on and I got a code saying it’s the camshaft sensor, that was also replaced, and the error is still occurring. Will there ever be a fix for this? Idk if the shop may have caused this
What is the code exactly? And what is it’s definition?
Yo same bro
BarboursAutoHelp me personally have had the same exact experience as this guy I have a code p052A ,P0103,P0113,P0131
@@BarboursAutoHelpI'm having something similar, I replaced the valve cover gasket so, after everything was put back together, all of a sudden I got the check engine light on so, I scanned it and it's giving me code P0013 ( B Camshaft position actuator A control circuit/Open bank 1). Would that be the selenoid or the chamshaft sensor??
Does anyone know if it can be found in roughly the same place on a 2009 MK2 ford ka 1.2 zetec
Thank you.
You're welcome!
I am having codes P0320, P0344, P0369, P061C, and P1336. Have replaced both camshaft and crankshaft sensors but still get the fault codes and the car won't start. Do you have any tips? I'm almost giving up on this car.
Did you ever get it figured out? The only code I don’t have that you do is p1336
Do you have the link to the parts?
so which one is more importent and cuz misfire?
Come again?
@@BarboursAutoHelp which camshaft sensor is more importnat
Both
@@BarboursAutoHelp
I have a 2016 Ford Focus SE and has the following codes
P0300 - Random Misfire
P0301 - Cylinder 1 Misfire Detected
P0304 - Cylinder 4 Misfire Detected
P0316 - Misfire Detected on Startup (First 1000 Revolutions)
I've replaced the spark plugs and swapped Coils 2 and 3 with 1 and 4 and they came back
I'm thinking it might be these Camshaft Position sensors based on some research. Do you have the part numbers?
@@JEE7600 have same iisue with my focus mk3 ST if you fine the solution pls share with it. In my case it wasnt the camshaft sensors.
How to replace Map sensor
This vehicle is not equipped with a MAP sensor. It has a MAF sensor.
Replaced both sensors. Code came right back and power loss persists
Do you have diagnostic trouble codes?
@@BarboursAutoHelp yes. Cam position sensor.
@@BarboursAutoHelp yes.camshaft position sensor.
@@vids2290 What are the code numbers... PXXXX? Was any work performed recently other than replacing the sensors?
@@BarboursAutoHelp p0340. No work done in 57k miles other than oil changes, front brakes last year.